Trouble burning picture cd,help !

I tried to burn a picture cd by exporting to a burn folder..which when done held 16 pics..once I hit burn and then looked at it in my dvd player..it said I had 32pics every other one being blank..what am I doing wrong?Extremly new at this..asked my question in iphoto forum Old Toad sent me here..Thanks for helping
macG4 Mac OS X (10.4.6)

Macintosh files have two parts, a data fork ad a resource fork. Normally the picture is in the data fork. Non-Apple apple machines often see Macintosh files as two separate files, one for each fork. The resource fork often shows as empty. You can use Graphics Converter <http://www.lemkesoft.com> to save your files with no resource fork by choosing the correct option in the Save dialogue.

Similar Messages

I am having trouble burning discs! HELP!

Ok I was able to burn playlists to discs about a month ago. Now yesterday I was trying to burn a playlist to a disc and i got an unknown error (4000). What do I do so that I can burn playlists to a disc again!
4th generation Windows XP

Unfortunately there doesn't seem to be an easy answer to this error 4000, and "upgrading" to iTunes 4.9 when we are currently at version 6.01.(3) is a retrograde step.
If you go to the Importing and Burning section of the iTunes for Windows forum and type "error 4000" in the search field, you are going to see a lot of posts about this.
Check some of them out, and you may find some useful info.

I am having trouble burning a gapless album that is a mixed compilation. I have selected part of compilation album on the options tab and I did select gap between songs as zero. When I play the cd, it is sticking between songs? Please help!

I am having trouble burning a gapless album that is a mixed compilation. I have selected part of compilation album on the options tab and I did select gap between songs as zero. When I play the cd back after burning, it is sticking between songs? Please help!

sheldz46 wrote:
Thanks Chris but according to Pioneer, is was possible with the itunes in 2010.
It wasn't. (at least as far as setting Part of Gapless album goes. See next para.)
They claim that itunes will work if you select gapless album, part of a compilation
Selecting Gapless album does not make it gapless. (which is likely that now this option is removed - to not confuse people)
The ONLY thing that option did was tell iTunes to NOT crossfade consecutive songs from same gapless album IF you had crossfade enabled.
-> http://support.apple.com/kb/ht1797
Setting the gap to 0 is what made it "seem" gapless.
Perhaps it is not working as it used to.
Try a slower burn speed.
and used itunes to convert them to mp3
Dont know why they suggest this.
Simply use the WAV file. Then there will be no loss (as there is when converted to MP3).

HT1349 having trouble burning cd that i purchased from your store please help ?

having trouble burning cd that i purchased from your store, can you please help?

Go to I tunes store page, look to the far right and click on purchased.

Hello I am having trouble burning cds keep getting error mes. 4450 ? Help!

Hello, I am having trouble burning CDs from itunes keep getting error message 4450? Help

The next time you have the problem, note the exact time: hour, minute, second.
If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Scroll back in the log to the time you noted above. Select any messages timestamped from then until the end of the episode, or until they start to repeat. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

HT1338 I'm having trouble burning my photos from i photo what should i do

im having trouble burning my photis it tells me there is an errors in the writing

There are 9 different versions of iPhoto and they run on seven different versions of the Operating System. The tricks and tips for dealing with issues vary from version to version and OS to OS. So before anyone can help, they need information to work with. Basic stuff:
- What version of iPhoto.
- What version of the Operating System.
- Details. What were you doing when the problem arose?
- Did it ever work properly?
- Are there error messages?
- What steps have you tried already to solve the issue.
Anything else you can think of that might allow someone else to understand your issue.
With this kind of information somebody can develop a starting point for troubleshooting the issue.

Error 4900 When burning discs PLEASE HELP ME !!!

When i try burning a disc from itunes, after about a minute of doing stuff the disc ejects and i get a message saying there was an error burning the disc (4900)
This has only started happening the past couple of weeks, before that i never had any trouble burning discs from itunes atall.
It is very frustrating as i havent a clue what it means or what to do about it, can anyone help me fix it???
Please!!!!!!!!!!!!!!!!!

I just ran the diagnostics test and this is the results
Microsoft Windows Vista Home Edition Service Pack 1 (Build 6001)
Acer Aspire 5520
iTunes 8.0.1.11
QuickTime 7.5.5
FairPlay 1.0.15
CD Driver 2.0.7.5
CD Driver DLL 2.1.1.1
Apple Mobile Device 2.1.1.13
Bonjour 1.0.5.11 (118.5)
iTunes Serial Number 25042FB61CBEED6A
Current user is not an administrator.
The current local date and time is 2008-10-04 17:29:33.
iTunes is not running in safe mode.
Video Display Information
NVIDIA, NVIDIA GeForce 7000M / nForce 610M
** External Plug-ins Information **
No external plug-ins installed.
** Network Connectivity Tests **
Network Adapter Information
Adapter Name: {FB97CCED-8C3D-4788-9FD1-7EDF228EAD8D}
Description: Broadcom 802.11g Network Adapter
IP Address: 192.168.1.2
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.1.1
DHCP Enabled: Yes
DHCP Server: 192.168.1.1
Lease Obtained: Sat Oct 04 17:05:55 2008
Lease Expires: Sun Oct 05 17:05:55 2008
DNS Servers: 192.168.1.1
192.168.1.1
Adapter Name: {4A66390C-37F1-4179-AF6D-56BE200D52CB}
Description: NVIDIA nForce Networking Controller
IP Address: 0.0.0.0
Subnet Mask: 0.0.0.0
Default Gateway: 0.0.0.0
DHCP Enabled: Yes
DHCP Server:
Lease Obtained: Thu Jan 01 00:00:00 1970
Lease Expires: Thu Jan 01 00:00:00 1970
DNS Servers:
Active Connection: LAN Connection
Connected: Yes
Online: Yes
Using Modem: No
Using LAN: Yes
Using Proxy: No
SSL 3.0 Support: Enabled
TLS 1.0 Support: Enabled
Firewall Information
Windows Firewall is on.
iTunes is enabled in Windows Firewall.
Connection attempt to Apple web site was successful.
Connection attempt to iTunes Store was successful.
Secure connection attempt to iTunes Store was successful.
Secure connection attempt to iPhone activation server was successful.
Last successful store access was 2008-09-26 09:39:17.
** CD/DVD Drive Tests **
LowerFilters: PxHelp20 (2.0.0.0),
UpperFilters: NTIDrvr (1.0.0.6), GEARAspiWDM (2.0.7.5),
E: MATSHITA DVD-RAM UJ870QJ, Rev 1.00
Audio CD in drive.
Audio CD reading succeeded.
Get drive speed succeeded.
The drive CDR speeds are: 4 8 12 16 24.
The drive CDRW speeds are: 4.
The drive DVDR speeds are: 4.
The drive DVDRW speeds are: 4.
The last failed audio CD burn had error code 4900(0x00001324). It happened on drive E: MATSHITA DVD-RAM UJ870QJ on CDR media at speed 24X.
** iPod/iPhone Connectivity Tests **
iPodService 8.0.1.11 is currently running.
iTunesHelper 8.0.1.11 is currently running.
Apple Mobile Device service 2.11.32.0 is currently running.
Universal Serial Bus Controllers:
Standard OpenHCD USB Host Controller. Device is working properly.
Standard Enhanced PCI to USB Host Controller. Device is working properly.
FireWire (IEEE 1394) Host Controllers:
RICOH OHCI Compliant IEEE 1394 Host Controller. Device is working properly.
Most Recent Device Not Currently Connected:
iPod nano (3rd Generation) running firmware version 1.1.3
Serial Number: 6U747640YXR

I Am having trouble email pictures from Elements 11 .

Hi everyone I am having trouble send pictures from Photoshop Elements 11. I did it before I don't why not working. Could you help me .
Anna Marie

Hi,
If you get to the point of seeing the message ready to send and then click on the send button, do you see an uploading message?
For an image that you have just emailed, go to the Information panel on the right hand side and look at History - does that end with an emailed message?
Most errors I have seen have occurred before the email is actually sent.
It could be a problem with the Adobe server but I have just managed to send myself an image.
The other possibility is that the email is being blocked by a spam filter somewhere.
Brian

Trouble burning a DVD

Hi I'm having trouble burning a DVD. When I click burn, it all goes well until it's finished when it says that the HVDVD_TS folder was not included in the final disc. If anybody can help I would greatly appreciate it. Thanks.

what up J
what is it you want to burn, sounds liek a "hddvd". if thats the case check out my previous post at
http://discussions.apple.com/thread.jspa?threadID=317826&tstart=0

Trouble burning a CD

I am having trouble burning a CD. None of the setting combinations I have tried produce a CD that works in the player in my car. The MPEG setting makes a CD that the player reads but there is no sound. Please help.

Al,
Many car players require that it be a standard audio CD, so make sure that is the setting you are using. Also, the blank must be a CD-R, not a CD-RW, as the latter are problematic for normal CD players.

I have been having trouble burning a DVD.

I have been having trouble burning a DVD. It goes through all the steps until it gets to the multiplexing "burn" step and then with 3 minutes left the disk pops out. The disk is left empty and an error comes up. I have been able to burn DVD's before, so this is frustrating.

Well - not correct answer as I understands it - This is a very complex question. In my case I'de put a button just touching the TV-Safe area boarder. Moving it a minute inside and the Error disappeared.
BUT - there are so many other things that I collected a long long list on this - read and see if You find help here.
Multiplexing Error
PART One.
Use of strange video/audio material eg .avi, .wmv, .mp3 etc.
I only use.
Video - StreamingDV (miniDV tape via FireWire) and
Audio = .aiff (as on audio-CDs) (else coverted to this .aff 48KHz)
Chapters !
A. Using strange letters in video project name eg +,/; etc. keep to a-z and 0-9 strange letters in project name eg +
as described by Donnyboy69. Does the title of your project have any symbols or decimal points in it. If so, that is why you are getting the error. I had a project that had a + sign which caused the same problem. I renamed it without the symbol and low and behold, it worked.
B. Location of Chapters
• Can’t be at start or end of movie (Skip first/start one - iDVD sets this by it self. At the End - no need)
• Not in a transition (or within 2-3 seconds from it)
Important when from iMovie HD6 or previous - Now also observed when using FCE 4
PART Two.
from Robert Modero.
"Multiplexing Error. Problem during initialization of tracks"
Simply remember to add subtitles to your Quicktime files and menu buttons.
Once I did that, I was back in business.
from Boise Jim
Do a safe reboot (by holding down the shift key until you see the spinning gear on grey background, then release, then restart when your start-up screen appears).
I always makes a DiskImage first and test this so that it runs OK
I use only - Verbatim DVDs
I use only - DVD-R
I burn at an as slow speed possibly eg x1
This gives good DVDs
PART Three.
Multiplex Error
Chuck, Chicago 2/7/2009.
Back again. Here is what I have found to work. I also have and use a LaCie DVD-R/RW DL external drive and a LaCie external hard drive as well. Since yesterday I have tried a few ways to burn a themed iDVD project having four 56 minute movies on it, amounting to 226 minutes onto a DVD DL disc, capacity 240 minutes. Apple tech support really didn't know what to do but gave me a very good tip. I had two options left. Apple tech support's tip was to try disc image. One of the replies on a thread with this subject said not to, but my experience today is good. Put your project onto "Burn to disc image," under "iDVD, file." Yesterday encoding took me 23 1/2 hours. Overnight for iDVD disc image, encoding took 21 1/2 hours (again) while I slept. This morning I tried to copy/burn disc image to a DVD with Roxio Toast 7, and it stopped near the end of the burn with some kind of "error" message. So then I tried Utilities> Disc Utility> Burn icon, and followed it through. Be sure to click the DVD DL drive in the window "Burn disc in.". I had one other problem though. At the end of a 46 minute copy, it started to verify, and at the end of verify it rejected the burn. So I tried again, and when "verify" appeared, I clicked on "Skip." The disc finished burning and is doing fine and well. A long and tortuous process, but at last something works. I made several additional copies using Disc Utility. Best wishes. Chuck, Chicago.
2. Disconnect any other external devices not absolutly needed.
eg external USB/USB2 hard disks, other FW hard disks etc.
3 Chapter marks in transitions - minimum 2 sec from
FROM Bev.
(Not a 'guy' but I will answer!)
First, I do not think that mixing widescreen and standard makes a difference in iDVD.
Second, you should use a better brand of DVD disk. Also, many of us have experienced fewer problems on playback with DVD-R disks. Recommended brands here are Verbatim, Maxell and Taio Yuden. Memorex and TDK are not consistent and may not give you a correct burn. They apparently have fewer layers in the composition of the disk. I have always used Verbatim DVD-R disks and have not had any burn problems.
Also, choose a slower burn speed, 4x or less.
Third, to determine if the iDVD project will burn properly, create a disk image file (from within iDVD, go File->Save as Disk Image) and test it. Mount the disk image and then open DVD Player (in Applications) and view your project. If it plays correctly, you can then burn the actual DVD disk from the disk image file using Disk Utility.
From. Boise, Idaho
I did everything I've seen suggested, but a friend (who used to be an Apple Genius) suggested that I do a safe reboot (by holding down the shift key until you see the spinning gear on grey background, then release, then restart when your start-up screen appears).
It worked, and I got a clean burn from iDVD.
Hopefully this can help other people.
by dheb0422
Well, I finally got it, and it was odd enough to post here incase anyone looks this topic up again. Many things were tried, including burning the uneditited film, the edited film without titles and chapter markers, abbreviating the chapter markers in case length was the issue (remember the old iMovie used to truncate them when moving to iDVD?). In the process, I noticed that one, and only one, chapter marker was on the same line as the title marker. All the others were on the line above. The only way I seemed able to change that was to clip a few seconds of film. After that last clip, the offending marker took a place on the line above, as were all the others. That run published, compiled completely and burned. That's one for the books.
*One user more writes*
To add my experience with Multiplex Errors using iDVD (7.0.4), I recently created two iDVD projects
Video from both passed from FCE 4.01 with chapters
One project worked fine in creating disk image file
The other gave Multiplex Errors
I tried suggestions to remove special characters and no chapter marks at beginning, but nothing worked
Note that I've used iDVD for dozens of projects and this is first time I've run into Multiplex Errors
Anyway, for problem project, I tried an experiment where I removed all chapters in FCE and passed to new iDVD project
This time multiplex errors gone
So had something to do with chapters
So now I tried numerous experiments to remove individual chapters and try again creating disk image with new iDVD project
After numerous trys, I was able to narrow problem down to 1 "Bad" chapter mark
That is, when I left the "bad" chapter in my FCE project and passed to iDVD, iDVD gave multiplex error
When I removed "bad" chapter mark (and others in), no mulitplex error
As a final experiment, I moved "bad" chapter mark about 5-10 secs beyond original point and passed to iDVD, the multiplex errors now magically went away and I was able to finally create my disk image.
I have no idea why this worked, but thought I'd mention here in case someone else runs into similar problem.
Rich839
In addition to Bengt's fine advice, burning errors can occur if you have located any of your menu buttons wholly or partly outside of the safe TV viewing area. Go to your main project menu, then click on View/Show TV Safe Area, to check. Drag into the safe viewing area any buttons that are outside the safe viewing area.
Russ One - suggest this
Multiplexer Error-There was an error during muxing preparation
One thing that worked for me was to export the video w/o chapter markers as a self contained movie (thereby not loosing the edits & etc). Then make a new FCE project and import that movie into a new sequence and add the chapter markers. I've used "-", "&" and "," with no problem in the chapter names. Removing the markers or exporting without them did solve the problem but renaming them with just numbers 1,2,3....5, did not solve the problem and since this problem seems to happen with with iMovie as well, it would suggest the problem is in the video or audio and in combination with the chapter markers iDVD just can't handle it. The only other possibility is that both iMovie and FCE share the same or similar chapter marker code that some how is corrupting the markers.
Yours Bengt W

Trouble Burning Projects especially larger files

I'm havign trouble burning larger files. It either freezes or displays a message of failure of ProHeadless.exe. I read turning off screen saver and power save screens will help but I am not sure it will help with the ProHeadless.exe problem. I've tried downloading the Adobe Updater but now that isn't updating everything. Any solutions?
Note* Have sucessfully burned hour long dvd's before

This is aimed at Premiere Pro, but may help
A link with many ideas about computer setup http://forums.adobe.com/thread/436215?tstart=0
Work through all of the steps (ideas) listed at http://ppro.wikia.com/wiki/Troubleshooting
If your problem isn't fixed after you follow all of the steps, report back with the DETAILS asked for in the questions at the end of the troubleshooting link
Also, specific to Encore
Update even if you are not doing BluRay!
Encore Roxio component problem http://forums.adobe.com/thread/400484?tstart=0
More on Encore and Roxio http://forums.adobe.com/thread/528582?tstart=0 or direct to
http://kb.roxio.com/search.aspx?URL=/content/kb/General%20Information/000070GN&PARAMS
Long File Names Cause Crashing http://forums.adobe.com/thread/588273
Encore Tutorial http://www.precomposed.com/blog/2009/05/encore-tutorial/

Having trouble burning images to cd, get error code 0x8002006E - what is it?

Hello all, I am having trouble burning images to a cd, I get error code 0x8002006E - what is it? I have an older MacBook Pro, OSX 10.6.8. Help!

You might also try SMC and PRAM resets:
http://support.apple.com/kb/ht3964
http://support.apple.com/kb/ht1379
And you might try deleting the "com.apple.finder.plist" in your Library.
Ciao.

I have an '09 15" mac book pro running os x mavericks and I'm having trouble burning a dvd.

I have an '09 15" mac book pro running os x mavericks and I'm having trouble burning a dvd. In iMovie, I sent my movie to file and then to iDVD to burn a copy. It was saved in Documents. When I went to iDVD, the thumbnail image of the movie to be burned was faded and inoperable. What's going on now?

Did you export the movie out of iMovie as 480p? Next just drag the movie from the Documents folder into the iDVD menu window being careful to avoid any drop zones.
Lastly follow this workflow to help assure the best qualty video DVD:
Once you have the project as you want it save it as a disk image via the File ➙ Save as Disk Image menu option. This will separate the encoding process from the burn process.
To check the encoding mount the disk image, launch DVD Player and play it. If it plays OK with DVD Player the encoding is good.
Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality. Always use top quality media: Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
OT

Can't burn to CD - help!

I'm having troubles burning CD's. It's never been an issue before and everything else seems to work fine.
I can burn a DVD just fine but not CD's.I get the message:
"Burn Failed. The burn to drive....failed. The device failed to calibrate the laser power level for this media."
I tried to burn in several users (unsuccessfully). I followed Toads instructions - (putting preferences in a separate folder etc....) and then resorted to uninstalling iPhoto and re-installing. I still am unable to burn CD's. I am able to burn on my MBP...(just to verify the CD's are fine). Thanks in advance.....Karen

vamsee:
Since you can burn from your account the problem is with your wife's account. Have her delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your User/Library/Preferences folder and try. If that doesn't help then have her try the following:
Trouble Shooting Preferences in Leopard
1 - Create a folder titled "Preferences A" on the Desktop.
2 - Open the working Preferences folder, HD/Users/your_name/Library/Preferences, and move the contents to the Preferences A folder on the Desktop.
3 - Make a duplicate copy of the Preferences A folder on the Desktop as a precautionary backup.
4 - With the working Preferences folder empty run the application again and determine if the problems is fixed.
NOTE: you may have to drag the contents of the working folder to the trash and empty if moving the contents to the A folder only copies them instead of moving.
5 - If the problem is fixed:
A - open the working Preferences folder (HD/Users/your_name/Library/Preferences).
B - Open the Preferences A folder on the Desktop, select all of the contents and drag them into the working Preferences folder.
C - When the Copy window pops up check the "Apply to All" check box and then click on the Don't Replace button as seen here.
6 - If the problem is NOT fixed, empty the working Preferencess folder and move the contents of the Preferences folder on the desktop back into it.
See if that clears up the problem.
OT

Trouble burning picture cd,help !

Similar Messages

Maybe you are looking for