Trouble burning to Blu-Ray with PE 7.0

I have tried for the last few months to burn a 2 hour video to Blu-Ray. I ahve burned shorter videos to a rewritable blu-ray disc with success but this video is just barely over the max (24/sec) quality. Even when I shorten it to the hgih quality length it still freezes up and crashes. I have made each chapter a saved file, so there are only 40 files and two items on the menu (move & slideshow). I have tried all the trouble shooting and even called adobe support. After a couple of hours they suggested I increase my virtual memory to 8000/10000 I have a quad-core processor and 4 gigs of RAM running XP pro. I just want to burn to blu-ray and DVD and cannot. Is their a trick that I don't know or is this product just worthless when it comes to burning. I tried changing the names of my files from m2t to mpeg and that didn't work either. I am soooo frustrated...
I'm willing to try just about anything. Has their been any more luck with the new 8.0 version--it sure came out quick since 7.0

My original format is AVCHD. Since I had so many cuts/edits/transitions I saved wach chapter as a high def file (I think H.264 1920x1080i) It saved it as a xxx.m2t file. I then used those 40 files in one 2 hours movie. That is where I am having trouble. I have pretty much doen every trouble-shooting thing that they list and the closest thing I get to is a 16 hour-encoding process that fails at 98%. I have even sucessfully saved the entire 2 hour movie as one huge file, but I still can't get it to burn. Like I said I have been able to burn shorter movies successfully, but there is something wrong or different with this one. I have tried several different things to change it (probably 20-30 times) and it either crashes while encoding the 2nd of 6 menus or it "unexpectedly quit" I am so frustrated with this. I had great success with version 2.0 & 4.0 The only thing I haven't tried is burning my 7.0 project in 4.0 (I uninstalled it after 7.0) I think 4.0 burns to blu-ray but it won't edit avchd like 7.0 I am currently successfully burning (Fingers crosses) in 8.0 trial version and will be really upset with adobe if they simply fixed their product and I have to shell out another $100 because they didn't get it right when they first released it. Has anyone else had this many problems buring long projects. Like I said I reduced the size of the project down to full qulity (24.00/sec) and that still doesn't work. I'll try anything.

Similar Messages

Best export format for encoding & burning Blu-ray with toast?

Hi!
Have a 1 hour and fifteen minutes program which I burn to Blu-Ray with Toast 10/HD. The problem is the time it takes, about 25 hours. Is this resonable really?
Maybe it´s depending on the format I put out from Final Cut - H.264, 1920 x 1080 (1888 x 1062)Stereo (L R), 48,000 kHz
Does anyone know if there is a better export setting in Final Cut to get the process work faster in Toast?
Best / Urban

I've never used toast to burn a BluRay however I have used encore and I export 10 bit uncompressed out of FCP and compress that. If your over an hour of program you'll have to scale back the data rate to make it fit, a 90 minute feature looks good content wise, but any text on it will show signs of the reduced data rate. the encode typically takes about 8 hours to build the disk image on an 8 core mac then about 45 minutes to burn from the image. I burn first to a rewritable in case of issues, then if it passes muster I'll burn the master

Can Disk Utility burn a Blu-ray ISO file?

This is a simple question to pose: assuming only the best of media and burner hardware (so that problems with those don't come into play), can Disk Utility reliably burn ISO images that represent a Blu-ray disk, complete with chapters and whatever else is contained on a Blu-ray disk?
Background
I'll be using Adobe Premiere to generate videos for burning to Blu-ray disk. There seems to be several ways for me to do that, and most of them seem to have problems:
1. From the completed Premiere project, I can jump into Adobe Encore and burn from there. But… many comments on the Adobe forum suggest that route may be problematic. No burn-speed control for instance. The Encore forum is full of people who don't use Encore's burning abilities, but instead use Toast or the PC equivalent.
2. Use Toast. I've just received a special offer form Other World Computing to buy Toast 11 Pro for $49. But… I've been put off buying Toast because of many poor reviews on Amazon. A handful of poor reviews I could ignore, but there are dozens.
3. Use Encore to generate an ISO image of my completed Blu-ray, then use Disk Utility to burn that ISO. But… there are websites in the internet jungle telling me I need to download their product to be able to burn Blu-ray ISO images on a Mac. On the other hand, there are reputable websites (here and here) that explain how to use Disk Utility to burn Blu-ray ISOs.
Basically, I'm confused. It seems to me that Encore > ISO > Disk Utility is the way to go, but I would like confirmation from Apple users that this route will work and is reliable. If not, maybe I should be buying Toast before the special runs out on 30 April.

First, I duplicated one of the links in my original post. The correct links are (1) and (2).
Thanks for the replies, but they haven't cleared up my confusion.
On the last page of the first link, lifted from the California Institute of the Arts website, clear instructions are given for using Disk Utility to burn a Blu-ray ISO.
Right at the bottom of the second link, lifted from the Drexel University website, similar instructions are given for using Disk Utility to burn a Blu-ray ISO.
Are both instructions incorrect in their basic assumption? When their students go to video lab to burn a Blu-ray, do the students find it can't be done?
This is really confusing. Toast gets very poor reviews, yet I've never had a problem with Toast 9. Two tertiary education sites tell me how to burn a Blu-ray with Disk Utility, but I've just received two responses which tell me it can't be done. I'm intrigued.

Cs 6 blu-ray with sub menus, only go back to main menu

I have burned a blu-ray with a main menu then sub menus: audio setup, chapters, extras.
(note: they are regular menus NOT pop-up menus and I would rather not do pop-up menus at this time)
when I am playing any of the sub menu content (trailer or making of or picking a chapter button from the chapter menu etc...) and press the menu button on the Blu-Ray player while it plays that content, it goes to the main menu instead of the sub menu.
I checked it in the simulator and it was working perfectly....just as I would expect it to.
each sub menu item (a trailer or making of featurette for example) is set to go back to the sub menu and it's button
when done playing...and it does.
It just refuses to do that when the menu button on a blu-ray player is used and instead goes to the main menu.
I ran the link checker before building the folders and burning it...no conflicts found.
This seems to be an issue with Encore in general, reading about this here and in
other forums.
Can Encore simply not create a proper blu-ray disc with sub-menu's you can
return to when the menu button on a remote is pressed?
Do I have to buy BluStreak in order to correct these rather obvious navigation errors?

Let us know what you find.
I think the original poster in the other thread observed that commercial BDs were showing the same behavior.
Even if true, it does not mean that some kind of scripting might not work.
But Encore would not have the option.

Slow Burning Movies to Blu-Ray with PE8

For several months, I've been converting a collection of old B & W movies from VHS tape to DVD using PE8. I've been burning to DVD-R and DVD+R DL and the process has gone quite well. To try to increase the number of movies/disc I recently installed an LG WH10LS30 Blu-ray burner in my Dell XPS420. This drive burns 3 AVI movie files(55.7 GB total) plus menus to a DVD+R DL 8X disc in 98 minutes which I find quite acceptable although I have no benchmark by which to judge. Burning a Blu-ray disc has turned out to be a totally different story. I have successfully burned 5 movie files(98.4 GB total) plus menus to a BD-RE 2X disc twice, using the same procedure as with DVD's, and it took about 16 hours each time - far longer than I ever would have expected!
The LG drive doesn't appear to be the culprit as I think the actual burning portion of the process took under an hour. It's the encoding/compiling time that's the killer. Lack of experience leaves me in a quandary as to whether my workflow needs overhauling for Blu-ray or my time expectations are too high(low). Hence I'd really appreciate some advice!
My workflow has been as follows:
(1) Import each movie from VCR through my Sony DV camcorder to PE8 as AVI file, perform basic editing & resave file in AVI form;
(2) Run Disk Cleanup, defrag HDD's, shut down other programs, non-essential processes & services, disable Internet & security software and set PE8 priority to High before proceeding;
(3) Assemble multiple AVI files in PE8 timeline, add menu markers, create menus and burn disc using NTSC DolbyDVD preset for DVD & MPEG2 1440 x 1080i NTSCDolby(for testing) for Blu-ray.
My XPS420 has an Intel duo core E8500 processor @ 3.16 GHz, 4GB RAM, a NVIDIA GeForce GTS 240 video card with latest driver, and two 7200 RPM hard drives, each with its own page file. The 320 GB C drive holds the Vista Home Premium OS and programs. It is 53% full. The 640 GB D drive is dedicated to the video files and is 38% full.

If you're using Premiere Elements to burn our videos to BluRay, Donald, you're making a big mistake.
You've got standard definition movies but you're outputting a hi-def video format (BluRay) so you're essentially telling the program to triple the number of pixels. This won't make your movie look hi-def. It just adds pixels to your standard def (720x480) AVI, which will only results in a fuzzy, blown-out video. This is also why the process is taking so long.
So you're essentially taking two to three times as long to create a fuzzier movie. Which is not a good workflow.
I think I know what you're trying to do. It sounds like you're trying to take advantage of the fact that a BluRay holds over 5 times as much data as a DVD. But that only means you can fit 5 times as many movies on a disc if your video is DVD video. In Premiere Elements, the only option for outputting to a BluRay is a hi-def BluRay file.
Even if you use a third-party program to create the kind of hybrid you're trying to create, it probably won't do you much good. Most disc players wouldn't know what to do with DVD files on a BluRay disc -- so you'd probably only be able to play your disc on a computer.
I recommend keeping it simple. Put DVD video on a DVD and put BluRay video on a BluRay.

Burning Blu-Ray with Compressor

Do any of you kind people know where I can find a step by step process to burn a Blu-Ray disc using compressor. I was able to do it once and it burned with no sound, and I have not been able to replicate even that process. I am able to use Compressor just fine other than with Blu-Ray. Apples documentation on how to use the Blu-Ray encoding part of Compressor is rather scant. I really need a detailed step by step guide on how to do it.
thanks--pete

This is a good one.
http://www.kenstone.net/fcphomepage/burn_br_mac_superdrivestone.html
Please do not cross post. Good luck.

Encore CS4 (version 4.0.0.258) will not finish burning to blu-ray disc when using a menu template. DVD burning works fine. Anyone know the problem with blu-ray? HELP!

Encore CS4 (version 4.0.0.258) will not finish burning to blu-ray disc when using a menu template. DVD burning works fine with menu template. Anyone know the problem with blu-ray? HELP!

For CS4 you must update the Roxio component, especially with Win8
http://forums.adobe.com/thread/1309029 http://docs.roxio.com/patches/pxengine4_18_16a.zip
http://corel.force.com/roxio/articles/en_US/Master_Article/000012592-PX-Engine-Description -and-Download

How do I burn a Blu-Ray disc with menus?

I have a 38 minute project comprised mostly of HD clips (.m2ts, .MP4 and a few .MPG). I try to render the project to Blu-Ray with Premiere Elements 12, it takes approximately an hour to reach 98% with message "Encoding Media", then switches to "Compiling Media" and freezes there (I let it go for 6 hours with no end in sight). Task Manager shows that it is not using any CPU cycles anymore, while it was using up to 96% of the CPU before it reached that point. I've been able to render this project to a DVD, to Folders on my HDD and to AVCHD successfully on a DVD.
For a test, I tried a 1 minute project with the same results. It wasn't until I removed the disc menu that I was able to burn a Blu-Ray disc. I am running project on a PC with Windows 7 Home Premium, 64 bit, an AMD Athlon II x4 635 Processor, 2900 Mhz, 4 cores, 4 logical processors with 4 GB of RAM. I have found a number of references to the 98% completion but no real solutions. Any assistance would be appreciated as I would like to produce a high definition disc with menus...

ATR and jerry9146, thanks for the replies. I am using version 12 of Premiere and, when I attempt to update, it tells me that I have the latest version. I am fairly new to Premiere although I have used other video software before. My motherboard supports up to 16 GB (4 slots) so I could try increasing the memory which would probably speed up the rendering process. I'm not so sure that not having enough memory would prevent it from completing the rendering process but who knows. Task Manager shows CPU usage in the high 90% and shows physical memory in the mid 50% during the rendering process...
My software always finds the media and lets me know if I have the wrong disc in (I had inadvertently inserted a DVD instead). I have tried both H.264 1440x1080i NTSC Dolby and H.264 1920x1080i NTSC Dolby. It does not have a choice for 1080p full HD.
I always cancel out of the Windows popup asking "How do you want to use this disc?" as I assume that Premiere will let the system know. Is that correct?
The movie menu that I chose for this project is a fairly simple one, Faux Widescreen from the General category. It contains 1 main menu and 3 scene menu pages containing a total of 17 scene markers which I inserted myself with Add Marker.
I had already taken out the Stop marker as I had read that it doesn't work for Blu-Ray anyways (and thought that that might have been the culprit). Spacing is good and there is no button overlap.
jerry9146, I have successfully burned an AVCHD file to a DVD thru Premiere and the quality is pretty good. Does the workaround that you suggest produce a Blu-Ray quality file?

Step by step process to burn Blu-Ray with Compressor

Do any of you kind people know where I can find a step by step process to burn a Blu-Ray disc using compressor. I was able to do it once and it burned with no sound, and I have not been able to replicate even that process. I am able to use Compressor just fine other than with Blu-Ray. Apples documentation on how to use the Blu-Ray encoding part of Compressor is rather scant. I really need a detailed step by step guide on how to do it.
thanks--pete

File>New Batch From Template>Create Blu Ray.
Then drag your exporting movie file onto the Compressor movie well or right click on the downward arrow and choose Source>File to locate your movie file.
But a blank BDR or BDRE in your blu burner and chose submit.

CS6 Error Message When Burning a Blu Ray Project to DVD

Hi,
I'm trying to burn a Blu Ray project to DVD and I'm getting this message when I try to build the project:
The project is an excerpt from a larger one and contains only 2 video files and no menus. However it's particularly worrying because the project from which this is an excerpt is large and complex. I have created it as a Blu Ray project but my final deliverable is DVD. I really don't want to have to rebuild as a DVD project because it took half a day to link up all of the menus and chapters.
Is there something I need to do in my encode settings?
Thanks in advance.

Thanks for your reply John.
It's extremely frustrating that this is the case. I'd have started with a DVD project in the first place had I not read this: http://helpx.adobe.com/encore/using/building-finished-project.html , specifically the following excerpt:
"You can build the same project to DVD and Blu‑ray formats no matter which format you select in the New Project or Project Settings dialog box. Encore makes the appropriate adjustments to transcode the elements to the correct format."
Reading that gave me the confidence to go ahead and build as a Blu Ray. I now have to find another half day to rebuild the project as a DVD.
Thanks again for the information.

ENCORE CS6 gives error message during the burning of Blu-ray Disc

I did it again - upgraded my Production Premium CS5 to CS6.
I will not forget CS4 that never came to work. It was not a workable version, but at best an Alfa or maybe Beta version.
I was therefore naturally afraid to upgrade my reasonably well functioning CS5 version, but did it anyway.
My fears kept unfortunately connectors. Audition CS6 scratchy and crunches a lot when I change Audio Device from MME to ASIO. It should be noted, that none of my other programs have this problem neither my Soundbooth nor Audition 5.5 which I fortunately still have installed. So it is only Audition CS6 that crunches with ASIO4ALL.
Encore CS6 is also a problem child. When I try to burn a Blu-ray Disc I get, in the final phase, following error message: Blu-ray Error: "device error", Code: "CreateStcSequence: Fail to write M2S file"
Fortunately, I can open the project file in my Encore CS5, which do not have the same problem. Encore CS6 cannot be used as a standalone application - I still need to have a previous version installed to complete my projects. It is not fair.
Unfortunately I can see that many others have the same problem. Even worse, however, that Adobe still has not come with an update or fair solution of the problem - after so long.
It annoys me infinitely, I every time have to spend so much time on the Internet in an attempt to find solutions to remedy Adobe problems. These are programs I have paid dearly for - exactly twice as much as others living in the U.S. pay - just because I live in Europe.
If there is a user who has some useful suggestions I would appreciate it very much.
I must complain about my bad English.
Thank you in advance.

Hi Jim,
ISO files also works for me, but that's not what I paid for.
So far I use just the previous version CS5, but hope at some point to get CS6 to work.

Has anyone burned 1080p blu-ray discs using Final Cut Pro alone?

I am in the market for a new computer. Currently I am a PC user who has burned Blu-Ray discs using Pinnacle. I am dissatisfied with that software because it hangs and crashes at critical moments in the rendering and burn process. I am considering switching to Mac but will only do so if I can burn true Blu-Ray movies which are playable in an ordinary Blu-Ray player.
I have read some of the discussions on this board and it is not clear to me whether it is yet possible to burn 1080p Blu-Ray discs playable on any Blu-Ray player using Final Cut Pro alone. Can someone confirm for me whether they have done this? Some users have indicated they can only output 720p using Final Cut Pro (which is not very satisfying). Others have indicated it is necessary to use Adobe Encore. If you have to use Adobe Encore to burn, why use Final Cut Pro at all? Why not use Adobe Premier Pro for editing and Encore for burning?

David S. wrote:
And yes you can author single track 1080p blu ray discs with Compressor 3.5.
But that's not what the OP asked, "using FCP alone."
Why not use Adobe Premier Pro for editing and Encore for burning?
Well, why not just put CS4 on your PC, especially considering you already have the BD hardware?
There is no truth to the rumor that applications running on Macintosh are any more stable than the same apps a PC; all systems crash.
bogiesan

Compressor - export to Blu-ray with more than 6 chapter Markers?

Hi,
I'm interested in creating Blu-Ray discs. I've played around taking a self contained 30 minute movie I created with FCPro 7 - it has several chapter markers put in while editing in FCPro.
I took the SC movie and brought it into Compressor and burned directly to a DVD with the Chapter markers. It worked perfectly.
2 questions, if anyone has done this . . . if I buy a Blu-Ray burner and firewire it into my MacBook Pro - can I burn the Blu-Ray exactly like I did the conventional DVD? Except now it'll be High Definition? I'm guessing in COmpressor, when I 'selected' the internal DVD burner - I guess I'll see the new external Blu-Ray one after I firewire it into the MacBook Pro?
My question is, will it then burn to the Blu-Ray exactly like it did to the internal conventional DVD burner, except be in HD now?
I just don't want to buy a Blu-Ray burner and have something nt work? Thanks, if anyone can confirm this.
I also have Roxio Toast Titanium 11. But keeping it all in Compressor seems easier - with limited screens.
Oh, I only get 6 chapter markers on a screen thru Compressor. Any tricks as to how I can get more than 6? I have like 30, and I'd rather not go thru 5 screens getting to the end!
Thanks very much if anyone has any experience in this area.
Larry

Thank you, Shawn. You're confirming everything I thought!
Just asking . . . perhaps you have a few thoughts here:
- Is Compressor version 4 any "different" than 3.5 - as far as just dropping in a QT movie master to compress?
- I guess there's no way to get more than 6 Chapter Markers in Compressor DVD? I don't see a way, perhaps there is? Or . . . I have to learn toast! But I can do that! Just easier if Compressor would do it all!
Thanks again

Create a Blu-Ray with Chapters

I have created a project in FCPX. I want to add Chapter Markers, Create a Chapter Menu, Burn to Blu-Ray, and finally be able to play the Blu-ray on my Blu-Ray player and be able to “jump” from Chapter to Chapter while watching the Blu-ray. As I understand it, FCPX DOES not allow you to create Chapter Markers and you need to use Compressor. Can somebody provide me with a Step by step procedure for accomplishing what I want to do? Is there a Tutorial or something that explains this process? Can it even be accomplished? Is there some other product that is better and easier to use then Compressor? In reading the Compresoor Manual I came across Job Actions which appeared to accomplish everything I was looking for, but I was not 100% certain. Thanks in advance for any help someone may be able to provide.

Barry,
Here is one way. (There are others, but in the interest of conserving space…)
Export your movie using export media.
Open Compressor and select the Create Blu Ray Disk from the Batch Template window. (You'll get an audio and a video target.)
Drag your exported movie to the source well.
Open the Preview window.
Use the timeline playhead to scrub through your movie and identify where you want to set your chapter markers. Hit M to set a marker.
To the right of the TL scroll bar, there is a (tiny) button. Open it and it will allow you to edit the marker.
Click on Edit and then you can name your marker.
Repeat as necessary.
When you open the job actions tab, it should give your blu ray burner as an option.
Good luck.
Russ

Anyone burning to Blu-ray?

Trying to figure out if I can actually burn a Blu-ray DVD with FCP 7?
Have you done it?
Had One on One session and Apple person had no idea.
I know you can export Blu-ray files out of FCP?
What type of burner to use? and proper DVDs?

To follow up...
You actually have a choice between burning AVCHD disks (which puts HD content on DVD or DVD DL at bitrates up to 17 Mbps) or Blu-ray (which requires an blu-ray burner and blu-ray media but allows much higher bitrates - up to 40 Mbps or more).
Depending on your use, AVCHD may be more than enough for you.

Trouble burning to Blu-Ray with PE 7.0

Similar Messages

Maybe you are looking for