Trouble capturing footage to final cut express

hey this is quite urgent....
i am trying to upload footage to final cut express from my sony DCR-HC52E. it sais VTR OK and plays and pauses and stuff but i cannot see anything it just stayed on those coloured bars.
i can see it playing on the camera though...
i got it working once with this camera, just cant remember how
any help would be greatly appreciated!

Hi
My table for this was once for iMovie - BUT it's more General than that so You might find help here.
*NO CAMERA or A/D-box*
Cable
• Are You sure that You are using the FireWire Cable - USB-Cable will not work for miniDV tape Cameras
FireWire - Sure not using the accompany USB-Cable but bought a 4-pin to 6-pin (or 9-pin) FW one ?
• Test another FW-Cable *very often the problem maker*.
Camera
• Test Your Camera on another Mac so that DV-in still works OK
• Toogle in iMovie pref. Play-back via Camera (on<->off some times)
• Some Cameras has a Menu where You must select DV-out to get it to work
• Camera connected to "charger" (mains adaptor) - not just on battery
• Camera set in Playback mode - NOT Recording mode
Does Your Camera work on another Mac ?
Sorry to say it is to easy to turn the 6-pin end of the FW-cable 180 deg wrong.
This is lethal to the A/D-chip in the Camera = needs an expensive repair.
(Hard to find out - else than import/export to another Mac ceased to work
everything else is OK eg recording and playback to TV)
A/D-box
• Is the dip-switches set right ?
• Set to same standard as recorded/editing eg NTSC 29.97fps or PAL 25fps
• Try resetting it
Connections
• Daisy Chaining most often doesn’t work (some unique cases - it’s the only way that work (some Canon Cameras ?))
Try to avoid connecting Camera <--> external HD <--> Mac but import directly to the Mac then move
the Movie project to dedicated external hard disk.
• FireWire-port - Can be re-setted by - Turn off Mac and disconnecting Mac from Mains/Power for 20-30 minutes
Mac
• Free space on internal (start-up) hard disk ? Please specify the amount of free space.
(Other hard disks don't count)
I go for a minmum of 25Gb free space for 4x3 SD Video - and my guess is 5 times more for 16x9 HD ones
after material is imported and edited.
• Does Your Mac have a FireWire Port
• White MacBooks - don't
• MacBook-Air - don't
if not then a few Mac’s has a PCM-CIA slot and there are FW-Cards that makes a FW-port this way
else - NO SOLUTION
Only option as I get it is either
• Use another Mac to Capture material (to an external USB2 - Mac OS Extended formatted hard disk - or -
• Change to another Camera that can be used with Your Mac (no there are no miniDV tape Cameras that can)
• If Your Mac-Book has a PCM-CIA Card place - then there are FW-port-Cards and then
You can import via this - but I've not seen this on more modern Macs. My PowerBook G4
has one and this FW-Card-port works greatly.
SoftWare
• Delete iMovie pref file may help sometimes. I rather start a new account, log into this and have a re-try.
• Any strange Plug-ins into QuickTime as Perian etc ? Remove and try again.
• FileVault is off ? (hopefully)
• Screen Saver - OFF
• Energy Saver - OFF
Using WHAT versions ? .
• Mac OS - X.5.4 ?
• QuickTime version ? (This is the heart in both iMovie and FinalCut)
• iMovie’08 (7.1.?), 09 or 11 ?
• iMovie HD 6 (6.0.4/3) ?
*Other ways to import Your miniDV tape*
• Use another Camera. There where tape play-back stations from SONY
but they costed about 2-4 times a normal miniDV Camera.
• If Your Camera works on another Mac. Make an iMovie movie project here and move it
over to Your Mac via an external hard disk.
(HAS TO BE Mac OS Extended formatted - USB/DOS/FAT32/Mac OS Exchange WILL NOT DO)
(Should be a FireWire one - USB/USB2 performs badly)
from LKN 1935.
Hi Bengt W, I tried it all, but nothing worked. Your answer has been helpfull insofar as all the different trials led to the conclusion that there was something wrong with my iMovie software. I therefore threw everything away and reinstalled iMovie from the HD. After that the exportation of DV videos (there has not been any problem with HDV videos) to my Sony camcorders worked properly as it did before. Thank you. LKN 1935
from Karsten.
in addition to Bengt's excellent '9 yards of advice' ..
camera set to 'Play' , not rec/computer/etc.?
camera not on battery, but power-line?
did your Mac 'recognize' this camera before...?
a technical check.
connect camera, on, playback, fw-connected...
click on the Blue Apple, upper left of your screen ..
choose 'About../More..
under Firewire.. what do you read..?
More
• FileVault - Secure that it’s turned off
• Network storage - DOESN’T WORK
• Where did You store/capture/import Your project ?
External USB hard disk = Bad Choise / FireWire = Good
If so it has to be Mac OS Extended formatted
----> UNIX/DOS/FAT32/Mac OS Exchange is NOT Working for VIDEO !
mbolander
Thanks for all your suggestions. What I learned is that I had a software problem. I had something called "Nikon Transfer" on my Mac that was recognizing my Canon camcorder as a still camera and was preventing iMovie from working properly. After uninstalling Nikon Transfer and doing a reboot, everything worked great.
I never liked the Nikon Transfer software anyway--I guess I'll get a cheap card reader and use that to transfer photos in the future.
*No Camera or bad import*
• USB hard disk
• Network storage
• File Vault is on
jiggaman15dg wrote
if you have adobe cs3 or 4 and have the adobe bridge on close that
or no firewire will work
see if that halps
DJ1249 wrote
The problem was the external backup hard drive that is connected, you need to disconect the external drive before the mac can see the video camera.
MaryBoog wrote
Maybe your problems is solved in the meantime, but for all others this might help as I had the same problem, also have the Sony HDR-HC7, but the 7e (Europe, PAL). I found this link today and it works perfectly
//support.sony-europe.com/tutorials/dime/videotransfer/vtransfer.aspx site=odwenGB&sec=DVH&m=HDR-HC7E
What I exactly did.- put camera in play mode - open guide - choose connection guide - choose comp./printer (where to transfer movie to) - select connection.- i-link (on my camera) but equal to firewire - OK - choose HDV - choose NO for conversion of i.link.
Settings are shown then (VCR HDV/DV.- HDV and i.link-conv..- OFF), press OK, OK, END.
Switch camera off. Connect firewire cable to camera & Mac. Switch camera on, in play/edit mode.
Open i-movie, choose import from camera. On screen below the camera connection is shown.- DV (HDV). Now you can import, automatically or manually.
This worked perfectly for me. Took me 2 days to find out. Could not find any clear thread explaining what I had to do on the camera and the manual was not clear either.
Yours Bengt W

Similar Messages

Best export method of footage from Final Cut Express to DVD?

I'm exporting footage from Final Cut Express using Quicktime Player and then burning the footage to DVD using iDVD.
The end result on DVD has very jagged interlacing (or noise) on objects in motion which aren't present when viewing the footage on FC. I don't think the problem is with iDVD (I assume I'm burning a pristine copy of an already reduced-quality clip).
Are there any changes I can make to the system preferences either on FC or Quicktime Player to reduce or prevent loss of digital information, or can anyone suggest better methods of export from Final Cut Express to DVD?

Hello
I'm not sure if this is relevant:
I've been using the Quicktime Conversion settings;
http://www.locationstudio.net/Settings.jpg
29.97 Frame Rate
Highest Quality
NTSC/PRO
I was under the impression that this was usually best - haven't had any problems with iDVD
Mike

Iphone footage into Final Cut Express

I left a question earlier in this forum and would like to update (hopefully that's proper process!). I'll repeat the question, in case:
I'm trying to get footage from iPhone 4 to Final Cut Express. I'm using MPEG Streamclip 1.9.2. In the tutorial I found, they did an export to Quicktime, selecting the Apple Intermediate Codec as the compression, 29.97 as the Frame, and "1280 x 720 (unscaled)" as the frame size option (I'm also selecting frame blending and better downscaling, and turning off interlaced scaling; the rest are Streamclip defaults). My version of Streamclip doesn't have a 1280x720 (unscaled), so I've been forced to select 1280x720 (HDTV 720P). Not sure if this is my problem.
On recent attempts, I've managed to get the clip into a QuickTime format (using the settings above) in a way that doesn't look stretched (can't tell whether it is or not). When I import the clip into FCE, it comes in without having to be rendered, and looks as if it's not stretched there either. But as soon as I drop the clip into the sequence and try to play it, I get the "Dropped Frames" warning. I'm already operating in RT Safe mode, and rarely/never have problems w/ dropped frames with clips that were captured from my Sony camera/tape. Is the AIC codec more demanding of faster drives? (I'm using a 200Gig external Apple drive at the moment). Or is it because I have been forced to export as a 1280x720 HDTV 720p as opposed to unscaled?
In FCE I've set easy set up to:
Apple Intermediate Codec, 29.97, and HDV AIC 720 p30; Is this a match with the Export QT version?
And if so, would the clip be coming into my sequence without having to be rendered? Since I haven't had to upgrade my hardware for my other camera, I'd be reluctant to go out and buy more external disk power, in the event it doesn't do me any good.
I know there are several posts on people trying to get iphone footage into FCE already, but they don't seem to apply and, after hours on the internet looking for a solution, I'm at my wits end. PLEASE HELP
Thanks in advance!!

The 4s records video as MPEG4/AVC (H.264)/1080p/30fps in a .mov filetype. Final Cut Express is NOT designed to edit this kind of video. You need to convert the 4s video clips to QuickTime/Apple Intermediate Codec/1080i before importing them into FCE. You can use MPEG Streamclip to do the conversion. In FCE you also need to select a matching Easy Setup (should be AVCHD Apple Intermediate Codec 1920x1080i60 for converted 4s clips) and create a new Sequence to edit your video. This should eliminate the constant re-rendering problem.
ps. Final Cut Express was discontinued in 2011 even before OS X Lion was released. It is no longer supported by Apple and there is no guarantee it will run properly on Yosemite. Just so you know. Final Cut Pro X is the currently supported app.

Is it possible to transfer stored (b-roll) video footage from Final Cut Express to Final Cut Pro event library? Is so, what do I need?

I have been editing in final cut express and now that I'm working in Pro X I would like to transfer my b-roll footage from FCX to Pro X. I read that there is an app. that you can buy that does this for Final Cut Pro 7, is this possible with Final Cut Express?

Any media used in FCE can be used in FCP. No third party software is required.
You cannot take an FCE project to FCP. 7toX will not help as FCE has no XML export.

Importing HD footage to Final Cut Express?

I am going to edit my own wedding video and I am hiring a professional to shoot the raw footage in HD. I have a small, hand held Panasonic PV-GS300 that shoots in SD on Mini DV tapes. I understand that I cannot effectively upload HD footage through this small camera and still maintain the HD quality from the original footage. My conclusion is that I am going to have the HD footage converted into Quicktime files and loaded onto my external hard drive that I can import into Final Cut Express. Will somoene just confirm that this will work? Is there anything I am missing? I just don't want to pay for professional footage and ultimately not be able to edit it, so if you think I'm forgetting something or if there's a specific type of footage or setting that is optimal for Final Cut Express, please let me know and I can pass this on to my videographer. Thank you for your help!

Hi there,
Yeah, it should work fine to get the videographer to give you the files. Make sure he/she shoots in a frame-size of *1280x720, 1440x1080, or 1920x1080* at a frame-rate of 29.97fps.
Ask him or her if it is possible to give you the files in the *Apple Intermediate Codec* with *uncompressed audio* at 48kHz.
Sasha

Capturing Photos onto Final Cut Express

Where my Emac is not connected to the Internet, how do I capture photos to put into a Final Cut Express project?

You import photos into FCE, not capture them. (File > Import)
It's not necessary for your Mac (eMac or otherwise) to be connected to the internet unless you are trying to download photos from a website. Is that what you want to do?

Capturing video on final cut express

I have connected my sony camera to my macbook computer and opened up final cut express
HD. It shows that my camera is indeed connected. I go up to file and click capture and the capture window opens. I click on capture now and my camera starts up and a black screen appears but nothing happens. When I hit escape, I return to the capture window and my movie is playing in the display window but nothing is being captured. What am i doing wrong?

Well one of the first things you're doing wrong is posting your FCE question in the FCP forum
http://discussions.apple.com/forum.jspa?forumID=936
I don't use FCE, so I'm not sure how its operation differs from FCP in this regard, but my guess is that you have not switched your camera to VTR mode and so what you may be seeing in the capture window is the back of the lens cap.

Capturing HD in final cut express

A few capture questions:
1. Is there a way to capture HD material in final cut express?
2. If I'm sending HD material through a digital converter, and then to the computer, will that digital computer all the file to be transfered in HD?
thank you.

From what version up can final cut express capture HD?
question 2: I'm running material from a BetaHD deck, but it doesnt have a fire wire connection, so i'm connecting video and audio cables to a digital converter which is connected to the computer via fire-wire. Does the HD signal maintain over this transfer?

Capturing analog into Final Cut Express HD

I'm new to Apple. I transferred analog video onto DVD and tried to download it into my MacPro using both Imovie and Final Cut Express HD to edit. I can do this easily on my Dell but can't on my Apple with either program. Any answers?

Buy an A-D Converter for $200 or more. If your camcorder has AV IN you can use that.
Otherwise download Streamclip free and use that to convert to DV:-
http://www.squared5.com/
Ian.

Trouble importing .mov into Final Cut Express

I have a number of video clips given to me by a client in Italy and provided as .mov files. I can view them in Quicktime with no problem. I want to edit them. I have Final Cut Express 4 and when I import the files, I can see the file listed, I can hear the audio play but I can't see the video. Is this a conversion problem of some sort? Do I need to convert it first into a different format — if so, what format and what conversion software do you recommend (I tried a couple of free ones to no avail).
Thanks for any help you can provide!

Hi everybody,
I've solved the problem by installing Final Cut 6 (latest version): when drag and drop the clip, the settings instantly suit to the clip properties (making rendering un-necessary).
The images are still stretched but, when I deselect "Show as Sq. Pixel" from the first of those 3 menus on the canvas display, images suddenly appear exactly as I wanted (even the images quality is exactly the same as the source).
Now the problem is Compressor (still latest version):
I've tried to convert with a lot of presets, but images are still vertically stretched and images are not as clear and sharp as the source.
Which is the right preset??
Thank you!

Unable to connect to Deck or Camera to capture footage. Final cut pro6

Hey guys,
I am wondering if anybody who has been in my situation or know how i can resolve my problem can help me.
I have been using my Deck to upload all my footage, in standard def, and my JVC GY HD100 camera to upload all HD footage without any problems until the last week.
I have been shooting alot of footage (SD) that needs to be captured and also master copies to be burnt to MINIDV from my computer, and i can not locate any of the devices which i would like to use.
When i open my FCP i get the following error message.
Unable to locate the following external devices:
Apple FIrewire PAL (720x576)
Dispite (on both occasions ) the JVC Camera and also the JVC BR-HD50 Deck is connected via Fire wire.
- I also changed all A/V Settings with no luck
- Tried using different FW Ports
- Trashed the preferences
- downloaded the updated Quicktime software and deleted the old versions
When i go into the System settings, the Firewire tab also says that the device is unrecognised.
- I have tried closing the mac down to reset the FW ports (many times last week, and it has also been off all weekend and it is still not allowing any connection to either camera or deck)
I do not know what else I can do to resolve the problem.
Is it a problem with Final Cut Pro, The deck, camera, or fire wire itself?
Or (as i suspect) a problem with the Mac?
Any help is appreciated.
Thanks in advance.
Dane

Hi David
Thanks for your reply - i Should have stated that i do only use either the Cam or the Deck at any given time - i do not have more than one DV device connected to Mac at any one time.
Sorry about not including that piece of information. Have you any other ideas??? I dont want to reinstall the OS from the disc until i have tried everything else, and unless its absolutly necessary.

AVCHD footage and Final Cut Express 4

Can somebody tell me how to transfer 1080/60i footage recorded with a Panasonic AG-HMC40P in Final Cut Exptess? Please try to explain step by step in easy language because I'm a bit of a moron when it comes to computers I'll also mix this footage with the SD video recorded in DVCAM format on cassette with a SonyDVCAM. What kind of setup would you think is the best for minimum hassle? My MacBook Pro is one of the first ones with only 2GB of RAM! Cheers

Hello, later versions of FCP can do it, but see this maybe...
http://www.bigasoft.com/articles/how-to-import-avchd-to-imovie.html

Capturing HD into Final Cut Express HD

I think i posted a topic about this some time back, but i thought i would again. i have this JVC HD camera, and i would like to import the video into FCEHD. but i was having a lot of trouble with it. i spoke to a JVC sales rep awhile back, and he said there was something i needed to download in order to do it. i called him yesterday, and he hasn't returned my phone call yet. i just thought i'd post a topic on here to see if anybody knew what he was talking about. if anyone could let me know what exactly i need to do in order to import this video, i'd really appreciate it.
hey, thanks.

After my previous post to your thread, my computer quit working properly and I deleted and reinstalled both QT 7.0.3 and FCE-HD. I now am able to capture HD footage with the camera set to HD (on lens barrell) and mpeg2 set on the firewire output switch. FCE easy setup is apple intermediate 1080i/60. I have to unplug then replug the firewire cable on the camera and rolling tape before going to capture. I can also capture SD video with all the exact same settings, but am not sure exactly what form it's going onto the computer in! DV video is via ntsc-dv codec and camera set to dv/dv.
Best regards, Manson

Capturing Footage from Canon HV40 to Final Cut Express Issue

I own a Canon HV40 camcorder and shot a short film using the 24p HDV 24F Cine Mode feature (for film look). I've captured the footage into Final Cut Express, but the footage is running at a faster speed. I know this may have something to do with frames per second in the user preferences section.
Does anyone have the concrete solution to this problem and will I have to recapture my footage under a different setting?
Please advise.
Thank you!
- Eric

Hi Eric,
FCE only supports frame rates of 60i, 30p, 50i, and 25p. To edit 24p footage you'd need Final Cut Pro.

What are the best data and bit rate setting for uploading from final cut express to Youtube?

Can anyone suggest the best data rate and bit rate presets for uploading footage from final cut express 4 to Youtube? What settings will provide the best resolution, quality, and match the current youtube requirements?
Thank you in advance for your help,
Susan Kayne

It depends on whether you are using aspect ratios of 4:3 or 16:9.
Below is some simple guidance that will provide good quality with reasonably small file sizes.
The first part is for 4:3 video:-
1. File>Export Using QT Conversion.
2. The "Format" window should say, "QT Movie".
3. In "Use" select "LAN/Intranet" from the dropdown menu.
4. Click "Save" and when it has finished encoding, upload it to YouTube.
If you are making 16:9 video (Standard or High Definition) do steps 1 to 3 above.
Then when you have selected "LAN/Intranet" press the "Options" button and in the new
window that opens press the "Size" button and change the "640x480" to "853x480"
To do this you will have to click on the 640x480 and a dropdown menu appears.
Select "Custom" from the bottom of the menu and in the window that opens
you will see 2 boxes.
Put 853 in the first box and 480 in the second.
Click OK.
Then Save it.

Trouble capturing footage to final cut express

Similar Messages

Maybe you are looking for