Trouble Compiling pango 1.8.0
I'm trying to compile pango 1.8.0 on a Solaris 10 workstation. The default configure runs okay but when I try to run make is fails with the errors shown below. Any advise on how I can get pango to compile would be greatly appeciated.
---make output---
make all-recursive
make[1]: Entering directory `/home/bjl/Temp/pango-1.8.0'
Making all in pango
make[2]: Entering directory `/home/bjl/Temp/pango-1.8.0/pango'
make all-recursive
make[3]: Entering directory `/home/bjl/Temp/pango-1.8.0/pango'
Making all in opentype
make[4]: Entering directory `/home/bjl/Temp/pango-1.8.0/pango/opentype'
make[4]: Nothing to be done for `all'.
make[4]: Leaving directory `/home/bjl/Temp/pango-1.8.0/pango/opentype'
Making all in mini-fribidi
make[4]: Entering directory `/home/bjl/Temp/pango-1.8.0/pango/mini-fribidi'
make[4]: Nothing to be done for `all'.
make[4]: Leaving directory `/home/bjl/Temp/pango-1.8.0/pango/mini-fribidi'
make[4]: Entering directory `/home/bjl/Temp/pango-1.8.0/pango'
make[4]: Leaving directory `/home/bjl/Temp/pango-1.8.0/pango'
make[3]: Leaving directory `/home/bjl/Temp/pango-1.8.0/pango'
make[2]: Leaving directory `/home/bjl/Temp/pango-1.8.0/pango'
Making all in modules
make[2]: Entering directory `/home/bjl/Temp/pango-1.8.0/modules'
Making all in arabic
make[3]: Entering directory `/home/bjl/Temp/pango-1.8.0/modules/arabic'
make[3]: Nothing to be done for `all'.
make[3]: Leaving directory `/home/bjl/Temp/pango-1.8.0/modules/arabic'
Making all in basic
make[3]: Entering directory `/home/bjl/Temp/pango-1.8.0/modules/basic'
make[3]: Nothing to be done for `all'.
make[3]: Leaving directory `/home/bjl/Temp/pango-1.8.0/modules/basic'
Making all in hangul
make[3]: Entering directory `/home/bjl/Temp/pango-1.8.0/modules/hangul'
make[3]: Nothing to be done for `all'.
make[3]: Leaving directory `/home/bjl/Temp/pango-1.8.0/modules/hangul'
Making all in hebrew
make[3]: Entering directory `/home/bjl/Temp/pango-1.8.0/modules/hebrew'
make[3]: Nothing to be done for `all'.
make[3]: Leaving directory `/home/bjl/Temp/pango-1.8.0/modules/hebrew'
Making all in indic
make[3]: Entering directory `/home/bjl/Temp/pango-1.8.0/modules/indic'
make[3]: Nothing to be done for `all'.
make[3]: Leaving directory `/home/bjl/Temp/pango-1.8.0/modules/indic'
Making all in syriac
make[3]: Entering directory `/home/bjl/Temp/pango-1.8.0/modules/syriac'
make[3]: Nothing to be done for `all'.
make[3]: Leaving directory `/home/bjl/Temp/pango-1.8.0/modules/syriac'
Making all in thai
make[3]: Entering directory `/home/bjl/Temp/pango-1.8.0/modules/thai'
make[3]: Nothing to be done for `all'.
make[3]: Leaving directory `/home/bjl/Temp/pango-1.8.0/modules/thai'
Making all in tibetan
make[3]: Entering directory `/home/bjl/Temp/pango-1.8.0/modules/tibetan'
make[3]: Nothing to be done for `all'.
make[3]: Leaving directory `/home/bjl/Temp/pango-1.8.0/modules/tibetan'
make[3]: Entering directory `/home/bjl/Temp/pango-1.8.0/modules'
make[3]: Nothing to be done for `all-am'.
make[3]: Leaving directory `/home/bjl/Temp/pango-1.8.0/modules'
make[2]: Leaving directory `/home/bjl/Temp/pango-1.8.0/modules'
Making all in examples
make[2]: Entering directory `/home/bjl/Temp/pango-1.8.0/examples'
/bin/bash ../libtool --mode=link gcc -g -O2 -Wall -o pango-xftview xftview.o renderdemo.o argcontext.o ../pango/libpango-1.0.la ../pango/libpangoft2-1.0.la ../pango/libpangoxft-1.0.la -R/usr/openwin/lib -R/usr/sfw/lib -R/usr/openwin/lib:/usr/openwin/sfw/lib -L/usr/openwin/lib -L/usr/sfw/lib -L/usr/openwin/sfw/lib -lXft -lfreetype -lXrender -lfontconfig
gcc -g -O2 -Wall -o .libs/pango-xftview xftview.o renderdemo.o argcontext.o ../pango/.libs/libpango-1.0.so -L/usr/local/lib ../pango/.libs/libpangoft2-1.0.so -L/usr/sfw/lib ../pango/.libs/libpangoxft-1.0.so /home/bjl/Temp/pango-1.8.0/pango/.libs/libpangoft2-1.0.so /home/bjl/Temp/pango-1.8.0/pango/.libs/libpango-1.0.so -lm -L/usr/openwin/lib -L/usr/openwin/sfw/lib /usr/local/lib/libgobject-2.0.so /usr/local/lib/libgmodule-2.0.so /usr/local/lib/libglib-2.0.so -lXft -lfreetype -lXrender -lfontconfig -R/usr/local/lib -R/usr/openwin/lib -R/usr/sfw/lib -R/usr/openwin/lib:/usr/openwin/sfw/lib
ld: warning: file /home/bjl/Temp/pango-1.8.0/pango/.libs/libpangoft2-1.0.so: linked to ../pango/.libs/libpangoft2-1.0.so: attempted multiple inclusion of file
ld: warning: file /home/bjl/Temp/pango-1.8.0/pango/.libs/libpango-1.0.so: linked to ../pango/.libs/libpango-1.0.so: attempted multiple inclusion of file
Undefined first referenced
symbol in file
XOpenDisplay xftview.o (symbol belongs to implicit dependency /usr/openwin/lib/libX11.so.4)
XDestroyRegion xftview.o (symbol belongs to implicit dependency /usr/openwin/lib/libX11.so.4)
XMapWindow xftview.o (symbol belongs to implicit dependency /usr/openwin/lib/libX11.so.4)
XCreateRegion xftview.o (symbol belongs to implicit dependency /usr/openwin/lib/libX11.so.4)
XPending xftview.o (symbol belongs to implicit dependency /usr/openwin/lib/libX11.so.4)
XDisplayName xftview.o (symbol belongs to implicit dependency /usr/openwin/lib/libX11.so.4)
XClipBox xftview.o (symbol belongs to implicit dependency /usr/openwin/lib/libX11.so.4)
XUnionRectWithRegion xftview.o (symbol belongs to implicit dependency /usr/openwin/lib/libX11.so.4)
XmbSetWMProperties xftview.o (symbol belongs to implicit dependency /usr/openwin/lib/libX11.so.4)
XCreateSimpleWindow xftview.o (symbol belongs to implicit dependency /usr/openwin/lib/libX11.so.4)
XSelectInput xftview.o (symbol belongs to implicit dependency /usr/openwin/lib/libX11.so.4)
XNextEvent xftview.o (symbol belongs to implicit dependency /usr/openwin/lib/libX11.so.4)
ld: fatal: Symbol referencing errors. No output written to .libs/pango-xftview
collect2: ld returned 1 exit status
make[2]: *** [pango-xftview] Error 1
make[2]: Leaving directory `/home/bjl/Temp/pango-1.8.0/examples'
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory `/home/bjl/Temp/pango-1.8.0'
make: *** [all] Error 2
In case anyone is interested; I was able to compile the next incremental version of pango, 1.8.1, without any problems.
Similar Messages
-
Trouble Compiling my Email-client
Hi
I have written this email -client, but have some trouble compiling it !
Then I try to compile it the following errors:
MailClient.java:350: <identifier> expected
public syncronize void mails(String t){
^
MailClient.java:727: ';' expected
private class myWindowListener extends WindowAdapter{
^
MailClient.java:747: '}' expected
3 errors.
What do I need to change to correct these errors ?
I hope that there is somebody out there who can help me get my program to work.
Thanks in advance.
Sincrely Yours
Fred
import java.io.*;
import java.awt.*;
import java.util.*;
import java.awt.event.*;
import javax.swing.*;
import javax.swing.tree.*;
import javax.swing.event.*;
public class MailClient extends JFrame implements ActionListener{
private Sendman mySendman;
private Letterman myLetterman;
public Writer myWrite;
public Reader myReader;
public Composer myComposer;
private Setup mySetup;
public Addressbook myAdressbook;
private FixTask myFixTask;
private Filter myFilter;
private Info myInfo;
public Vector mailIndexVector = new Vector();
public Vector filterIndexVector = new Vector();
public Vector folderVector = new Vector();
private JPanel tArea, trae, icon, tField;
private JTextArea ta;
private JScrollPane view, treeScroll;
private JTree tree;
public JTextField tf;
private JSplitPane split;
private Dimension Size;
private MailClient myMailClient;
private String mailBody, subject, from;
public boolean fromOutbox = false;
public boolean viewSource = false;
public static void main (String[] args) {
MailClient myMailClient = new MailClient();
public MailClient() {
super("Mail-Client");
ImageIcon linux = new ImageIcon("linux.gif");
this.setIconImage(linux.getImage());
icon = new JPanel();
icon.setLayout(new FlowLayout(FlowLayout.LEFT));
ImageIcon neu = new ImageIcon("getmail.gif");
JButton neueMails = new JButton(neu);
newMails.setActionCommand("Getting new Mails");
newMails.addActionListener(this);
newMails.setBorderPainted(false);
newMails.setToolTipText("Getting new Mails");
ImageIcon cr = new ImageIcon("creator.gif");
JButton creator = new JButton(cr);
creator.setActionCommand("Creator open");
creator.addActionListener(this);
creator.setBorderPainted(false);
creator.setToolTipText("Creator open");
JButton rep = new JButton(new ImageIcon("reply.gif"));
rep.setActionCommand("rep");
rep.addActionListener(this);
rep.setBorderPainted(false);
rep.setToolTipText("Reply");
JButton fwd = new JButton(new ImageIcon("fwd.gif"));
fwd.setActionCommand("fwd");
fwd.addActionListener(this);
fwd.setBorderPainted(false);
fwd.setToolTipText("Forward");
JButton ein = new JButton(new ImageIcon("settings.gif"));
ein.setActionCommand("settings open");
ein.addActionListener(this);
ein.setBorderPainted(false);
ein.setToolTipText("Setting open");
JButton adr = new JButton(new ImageIcon("adressbook.gif"));
adr.setActionCommand("adr");
adr.addActionListener(this);
adr.setBorderPainted(false);
adr.setToolTipText("Addressbook");
JButton lo = new JButton(new ImageIcon("trash.gif"));
lo.setActionCommand("trash");
lo.addActionListener(this);
lo.setBorderPainted(false);
lo.setToolTipText("trash");
JButton in = new JButton(new ImageIcon("info.gif"));
in.setActionCommand("Information");
in.addActionListener(this);
in.setBorderPainted(false);
in.setToolTipText("Information");
icon.add(newMails);
icon.add(creator);
icon.add(rep);
icon.add(fwd);
icon.add(set);
icon.add(adr);
icon.add(lo);
icon.add(in);
Vector h1 = myLeser.lese("Summary.4on");
for(int i=0; i<h1.size(); i+=7){
String id = h1.elementAt(i).toString();
String fo = h1.elementAt(i+1).toString();
String su = h1.elementAt(i+2).toString();
String fr = h1.elementAt(i+3).toString();
String to = h1.elementAt(i+4).toString();
String da = h1.elementAt(i+5).toString();
String re = h1.elementAt(i+6).toString();
MailIndex index = new MailIndex(id, fo, su, fr, to, da, re);
mailIndexVector.addElement(index);
Vector h2 = myReader.read("Filter.4on");
for(int j=0; j<h2.size(); j+=3){
String fo = h2.elementAt(j).toString();
String from = h2.elementAt(j+1).toString();
String te = h2.elementAt(j+2).toString();
FilterIndex index = new FilterIndex(fo, from, te);
filterIndexVector.addElement(index);
folderVector = myReader.read("Folder.4on");
DefaultMutableTreeNode top, inbox, outbox, sentbox, trash;
top = new DefaultMutableTreeNode("mails");
top.add(inbox = new DefaultMutableTreeNode("Inbox"));
for(int i=0; i<mailIndexVector.size(); i++){
MailIndex m = (MailIndex)mailIndexVector.elementAt(i);
if (m.folder.equals("Inbox"))
inbox.add(new DefaultMutableTreeNode(m));
top.add(outbox = new DefaultMutableTreeNode("Outbox"));
for(int i=0; i<mailIndexVector.size(); i++){
MailIndex m = (MailIndex)mailIndexVector.elementAt(i);
if (m.folder.equals("Outbox")){
outbox.add(new DefaultMutableTreeNode(m));
top.add(sentbox = new DefaultMutableTreeNode("Sentbox"));
for(int i=0; i<mailIndexVector.size(); i++){
MailIndex m = (MailIndex)mailIndexVector.elementAt(i);
if (m.folder.equals("Sentbox"))
sentbox.add(new DefaultMutableTreeNode(m));
for(int j=0; j<folderVector.size(); j++){
top.add(trash =
new DefaultMutableTreeNode(folderVector.elementAt(j).toString()));
for(int i=0; i<mailIndexVector.size(); i++){
MailIndex m = (MailIndex)mailIndexVector.elementAt(i);
if (m.folder.equals(folderVector.elementAt(j).toString()))
trash.add(new DefaultMutableTreeNode(m));
tree = new JTree(top);
tree.getSelectionModel().setSelectionMode
(TreeSelectionModel.SINGLE_TREE_SELECTION);
tree.addTreeSelectionListener(new myTreeSelectionListener());
treeScroll = new JScrollPane(tree);
treeScroll.setFont(new Font("Monospaced",Font.PLAIN,6));
baum.add("Center", treeScroll);
MainMenu menuBar = new MainMenu(this, this);
setJMenuBar(menuBar);
setVisible(true);
public void mailsFetcher() {
myLetterman = new Letterman(this, mySetup);
myLetterman.start();
public void treeNewSign(){
trae.remove(treeScroll);
DefaultMutableTreeNode top, inbox, outbox, sentbox, trash;
top = new DefaultMutableTreeNode("mails");
top.add(inbox = new DefaultMutableTreeNode("Inbox"));
for(int i=0; i<mailIndexVector.size(); i++){
MailIndex m = (MailIndex)mailIndexVector.elementAt(i);
if (m.folder.equals("Inbox"))
inbox.add(new DefaultMutableTreeNode(m));
top.add(outbox = new DefaultMutableTreeNode("Outbox"));
for(int i=0; i<mailIndexVector.size(); i++){
MailIndex m = (MailIndex)mailIndexVector.elementAt(i);
if (m.folder.equals("Outbox"))
outbox.add(new DefaultMutableTreeNode(m));
top.add(sentbox = new DefaultMutableTreeNode("Sentbox"));
for(int i=0; i<mailIndexVector.size(); i++){
MailIndex m = (MailIndex)mailIndexVector.elementAt(i);
if (m.folder.equals("Sentbox"))
sentbox.add(new DefaultMutableTreeNode(m));
for(int j=0; j<folderVector.size(); j++){
top.add(trash =
new DefaultMutableTreeNode(folderVector.elementAt(j).toString()));
for(int i=0; i<mailIndexVector.size(); i++){
MailIndex m = (MailIndex)mailIndexVector.elementAt(i);
if (m.folder.equals(folderVector.elementAt(j).toString()))
trash.add(new DefaultMutableTreeNode(m));
tree = new JTree(top);
tree.getSelectionModel().setSelectionMode
(TreeSelectionModel.SINGLE_TREE_SELECTION);
tree.addTreeSelectionListener(new myTreeSelectionListener());
treeScroll = new JScrollPane(tree);
trae.add("Center", treeScroll);
trae.repaint();
setVisible(true);
public void menuNewSign(){
setJMenuBar(new MainMenu(this, this));
setVisible(true);
public String fromFilter (String t){
String myFrom = "";
int start, end;
int a = t.indexOf("From:");
if (a != -1){
start = a + 6;
ende = t.indexOf("\n",start);
myFrom = t.substring(start,end);
return myFrom;
public String toFilter (String t){
String myTo = "";
int start, e1, e2, end;
int a = t.indexOf("To:");
if (a != -1){
start = a + 4;
end = t.indexOf("\n",start);
myTo = t.substring(start,end);
e1 = end + 1;
if(t.substring(e1,e1+1).equals(" ")){
while(t.substring(e1,e1+1).equals(" ")){
while(t.substring(e1,e1+1).equals(" "))
e1++;
e2 = t.indexOf("\n",e1);
myTo += " " + t.substring(e1,e2);
e1 = e2 + 1;
return myTo;
public String dateFilter (String t){
String myDate = "";
int start, end;
int a = t.indexOf("Date:");
if (a != -1){
start = a + 6;
end = t.indexOf("\n",start);
myDate = t.substring(start,end);
return myDate;
public String subjectFilter (String t){
String mySubject = "";
int start, end;
int a = t.indexOf("Subject:");
if (a != -1){
start = a + 9;
end = t.indexOf("\n",start);
mySubject = t.substring(start,end);
return mySubject;
public String mailFilter (String t){
String myMail = "";
int start = 0, end = t.length();
start = t.indexOf("\n\n") + 2;
if (start != 1){
int a = t.indexOf("\n\n" ,start);
if (a != -1){
if (t.indexOf(".",a+2) == a+2)
if (t.indexOf("\n",a+3) == a+3)
start = a;
myMail = t.substring(start,end);
return myMail;
public void mailsRemark(String file){
String mail = "", t = "";
Vector mailVector = myReader.read(file);
for (int i=0; i<mailVector.size(); i++)
t += (String)mailVector.elementAt(i) + "\n";
from = fromFilter(t);
subject = subjectFilter(t);
mailBody = mailFilter(t);
mail += "Subject: " + subject + "\n";
mail += "Date: " + dateFilter(t) + "\n";
mail += "From: " + from + "\n";
mail += "To: " + toFilter(t) + "\n";
mail += "\n" + mailBody;
if(viewSource == true)
ta.setText(t);
else
ta.setText(mail);
public syncronize void mails(String t){
Status myStatus = new Status(this,t);
myStatus.start();
public void delete(){
if(tree.getLastSelectedPathComponent() != null){
DefaultMutableTreeNode node =
(DefaultMutableTreeNode)tree.getLastSelectedPathComponent();
if(node.isLeaf()){
Object nodeInfo = node.getUserObject();
if(nodeInfo instanceof MailIndex){
MailIndex index = (MailIndex)nodeInfo;
mailIndexVector.removeElement(index);
int count = 0;
for(int j=0; j<mailIndexVector.size(); j++){
MailIndex index1 = (MailIndex)mailIndexVector.elementAt(j);
String id = index1.mailId;
if(id.equals(index.mailId))
count++;
if(count == 0){
File home = new File(".");
String mailsRemark = "." + home.separator + "data";
File datei = new File(mailsRemark, index.mailId);
datei.delete();
treeNewSign();
menuNewSign();
else{
String t = (String)nodeInfo;
boolean toDelete = false;
for (int i=0; i<folderVector.size(); i++){
if(folderVector.elementAt(i).equals(t)){
folderVector.removeElement(t);
konnteLoeschen = true;
if(toDelete == false){
message("This folder can not be deleted!");
treeNewSign();
else
message("Folder is not Empty! Please delete Your mails.");
else
message("No Mails where selected to be deleted!");
public void forward(){
if(from != null){
creatorOeffnen();
myCreator.tfSb.setText("Fwd to: " + subject);
myCreator.ta.setText("<" + from + ">" + " wrote:\n\n" + mailBody +
"\n\n>\n>\n\n");
public void reply(){
if(from != null){
creatorOeffnen();
myCreator.tfTo.setText(from);
myCreator.tfSb.setText("Reply to: " + subject);
myCreator.ta.setText("<" + from + ">" + " wrote:\n\n" + mailBody +
"\n\n>\n>\n\n");
public void end(){
String h = "";
for (int i=0; i<mailIndexVector.size(); i++){
MailIndex index = (MailIndex)mailIndexVector.elementAt(i);
h += index.mailId + "\n";
h += index.folder + "\n";
h += index.subject + "\n";
h += index.from + "\n";
h += index.to + "\n";
h += index.date + "\n";
h += index.read + "\n";
myWriter.writer(h,"Summary.4on");
String w = "";
for (int l=0; l<filterIndexVector.size(); l++){
FilterIndex index = (FilterIndex)filterIndexVector.elementAt(l);
w += index.folder + "\n";
w += index.from + "\n";
w += index.text + "\n";
myWriter.write(w,"Filter.4on");
String k = "";
for(int j=0; j<folderVector.size(); j++)
k += folderVector.elementAt(j).toString() + "\n";
myWriter.writer(k,"Folder.4on");
String t = "";
for (int l=0; l<myAddressBook.addressIndexVector.size(); l++){
AddressIndex aindex =
(AddressIndex)myAdressBook.adressIndexVector.elementAt(l);
t += aindex.alias + "\n";
t += aindex.email + "\n";
myWriter.write(t,"Address.4on");
setVisible(false);
dispose();
System.exit(0);
public void filterOpen(){
boolean test = false;
if(tree.getLastSelectedPathComponent() != null){
DefaultMutableTreeNode node =
(DefaultMutableTreeNode)tree.getLastSelectedPathComponent();
Object nodeInfo = node.getUserObject();
if(nodeInfo instanceof String){
myFilter.folder = (String)nodeInfo;
for(int i=0; i<filterIndexVector.size(); i++){
FilterIndex h = (FilterIndex)filterIndexVector.elementAt(i);
if(h.folder.equals(nodeInfo)){
myFilter.index = h;
test = true;
if(h.from.equals("")){
myFilter.box1 = false;
myFilter.fTf.setText("");
myFilter.fBox.setSelected(false);
myFilter.fTf.setEditable(false);
else{
myFilter.box1 = true;
myFilter.fTf.setText(h.from);
myFilter.fBox.setSelected(true);
myFilter.fTf.setEditable(true);
if(h.text.equals("")){
myFilter.box2 = false;
myFilter.tTf.setText("");
myFilter.tBox.setSelected(false);
myFilter.tTf.setEditable(false);
else{
myFilter.box2 = true;
myFilter.tTf.setText(h.text);
myFilter.tBox.setSelected(true);
myFilter.tTf.setEditable(true);
break;
myFilter.setVisible(true);
myFilter.fBox.requestFocus();
else
meldung("No selection");
public void sendOutbox(){
fromOutbox = true;
int i;
Block1:
for(i=0; i<mailIndexVector.size(); i++){
MailIndex index = (MailIndex)mailIndexVector.elementAt(i);
if(index.folder.equals("Outbox")){
Vector mailVector = myReader.read(index.mailId);
Block2:
for(int j=0; j<mailVector.size(); j++){
String m = (String)mailVector.elementAt(j);
if(m.indexOf("Subject:") != -1){
for(int k=0; k<=j+1; k++){
mailVector.removeElementAt(0);
break Block2;
Vector toVector = new Vector();
int tEnd = 1;
String line = "";
String t = index.to;
while (tEnd != -1){
tEnd = t.indexOf(", ");
if (tEnd == -1)
line = t;
else
line = t.substring(0,tEnd);
t = t.substring(tEnd + 1);
toVector.addElement(line);
File home = new File(".");
String mailsVerzeichnis = "." + home.separator + "data";
File datei = new File(mailsRemark, index.mailId);
datei.delete();
mySendman = new Sendman(mailVector, toVector, index.subject,
ailsAnzeig mySetup, this);
mySendman.start();
mailIndexVector.removeElement(index);
break Block1;
if(i == mailIndexVector.size())
fromOutbox = false;
treeNewSign();
public void partion(String cmd){
if(tree.getLastSelectedPathComponent() != null){
DefaultMutableTreeNode node =
(DefaultMutableTreeNode)tree.getLastSelectedPathComponent();
Object nodeInfo = node.getUserObject();
if(nodeInfo instanceof MailIndex){
MailIndex index = (MailIndex)nodeInfo;
index.folder = cmd.substring(13).toString();
treeNewSign();
else
meldung("No mails to partion!");
public void SetupOpen(){
if (mySetup.savePassword == false)
mySetup.pTf.setText("");
mySetup.setVisible(true);
mySetup.aTf.requestFocus();
public void addressbookOpen(){
myAddressBook.setVisible(true);
myAdressBook.tree.requestFocus();
public void creatorOpen(){
myCreator.setVisible(true);
myCreator.tfTo.requestFocus();
public void actionPerformed(ActionEvent event){
Object obj = event.getSource();
if (obj instanceof JMenuItem){
String cmd = event.getActionCommand();
if (cmd.equals("New fetched")){
mailsfetch();
else if (cmd.equals("Written new mails")) {
creatorOpen();
else if (cmd.equals("Reply")) {
reply();
else if (cmd.equals("Forward")) {
forward();
else if (cmd.equals("Outbox")) {
sendOutbox();
else if (cmd.equals("Delete")) {
delete();
else if ((cmd.length() >13) &&
(cmd.substring(0,13).equals("Sorting-"))){
sorting(cmd);
else if (cmd.equals("Using Addressbook")){
addressbookOpen();
else if (cmd.equals("Filter working")){
filterOpen();
else if (cmd.equals("New Order")){
myFixTask.tf.setText("");
myFixTask.setVisible(true);
myFixTask.tf.requestFocus();
else if (cmd.equals("delete")){
delete();
else if ((cmd.length() >7) &&
(cmd.substring(0,7).equals("nobody"))){
if(viewSource == false){
viewSource = true;
menuNewSign();
if(tree.getLastSelectedPathComponent() != null){
DefaultMutableTreeNode node =
(DefaultMutableTreeNode)tree.getLastSelectedPathComponent();
Object nodeInfo = node.getUserObject();
if(nodeInfo instanceof MailIndex){
MailIndex index = (MailIndex)nodeInfo;
mailsRemark(index.mailId);
else{
viewSource = false;
menuNeuZeichnen();
if(tree.getLastSelectedPathComponent() != null){
DefaultMutableTreeNode node =
(DefaultMutableTreeNode)tree.getLastSelectedPathComponent();
Object nodeInfo = node.getUserObject();
if(nodeInfo instanceof MailIndex){
MailIndex index = (MailIndex)nodeInfo;
mailsRemark(index.mailId);
else if (cmd.equals("Setup")){
SetupOpen();
else if (obj instanceof JButton){
String cmd = event.getActionCommand();
if (cmd.equals("aga")){
mailsHolen();
else if (cmd.equals("Creator Open")){
creatorOpem();
else if(cmd.equals("rep")){
reply();
else if(cmd.equals("fwd")){
forward();
else if(cmd.equals("Setup Open")){
SetupOpen();
else if(cmd.equals("adr")){
addressbookOpen();
else if(cmd.equals("delete")){
delete();
else if(cmd.equals("Information")){
myInfo.setVisible(true);
myInfo.b.requestFocus();
private class myWindowListener extends WindowAdapter{
public void windowClosing(WindowEvent event){
end();
private class myTreeSelectionListener implements TreeSelectionListener{
public void valueChanged(TreeSelectionEvent e) {
DefaultMutableTreeNode node =
(DefaultMutableTreeNode)(e.getPath().getLastPathComponent());
Object nodeInfo = node.getUserObject();
if(nodeInfo instanceof MailIndex){
MailIndex index = (MailIndex)nodeInfo;
mailsAnzeigen(index.mailId);
index.read = "Yes";Some suggestions:
1. as the others stated- you should really post specific questions rather than 1 huge ugly class!
2. use code tags
3. get a decent IDE- it would take about 1 minute to then see where the error is-
4. the rrors were just misspelled 'synchronized' and missing argument ','
5. Try not to make such huge classes!!- Try to follow certain coding "patterns"- like MVC- and not stick everything in 1 class- separate the functionality- it makes coding much easier!
here is fixed code (at least gets rid of those last errors):
import java.io.*;
import java.awt.*;
import java.util.*;
import java.awt.event.*;
import javax.swing.*;
import javax.swing.tree.*;
import javax.swing.event.*;
public class MailClient extends JFrame implements ActionListener{
private Sendman mySendman;
private Letterman myLetterman;
public Writer myWrite;
public Reader myReader;
public Composer myComposer;
private Setup mySetup;
public Addressbook myAdressbook;
private FixTask myFixTask;
private Filter myFilter;
private Info myInfo;
public Vector mailIndexVector = new Vector();
public Vector filterIndexVector = new Vector();
public Vector folderVector = new Vector();
private JPanel tArea, trae, icon, tField;
private JTextArea ta;
private JScrollPane view, treeScroll;
private JTree tree;
public JTextField tf;
private JSplitPane split;
private Dimension Size;
private MailClient myMailClient;
private String mailBody, subject, from;
public boolean fromOutbox = false;
public boolean viewSource = false;
public static void main (String[] args) {
MailClient myMailClient = new MailClient();
public MailClient() {
super("Mail-Client");
ImageIcon linux = new ImageIcon("linux.gif");
this.setIconImage(linux.getImage());
icon = new JPanel();
icon.setLayout(new FlowLayout(FlowLayout.LEFT));
ImageIcon neu = new ImageIcon("getmail.gif");
JButton neueMails = new JButton(neu);
newMails.setActionCommand("Getting new Mails");
newMails.addActionListener(this);
newMails.setBorderPainted(false);
newMails.setToolTipText("Getting new Mails");
ImageIcon cr = new ImageIcon("creator.gif");
JButton creator = new JButton(cr);
creator.setActionCommand("Creator open");
creator.addActionListener(this);
creator.setBorderPainted(false);
creator.setToolTipText("Creator open");
JButton rep = new JButton(new ImageIcon("reply.gif"));
rep.setActionCommand("rep");
rep.addActionListener(this);
rep.setBorderPainted(false);
rep.setToolTipText("Reply");
JButton fwd = new JButton(new ImageIcon("fwd.gif"));
fwd.setActionCommand("fwd");
fwd.addActionListener(this);
fwd.setBorderPainted(false);
fwd.setToolTipText("Forward");
JButton ein = new JButton(new ImageIcon("settings.gif"));
ein.setActionCommand("settings open");
ein.addActionListener(this);
ein.setBorderPainted(false);
ein.setToolTipText("Setting open");
JButton adr = new JButton(new ImageIcon("adressbook.gif"));
adr.setActionCommand("adr");
adr.addActionListener(this);
adr.setBorderPainted(false);
adr.setToolTipText("Addressbook");
JButton lo = new JButton(new ImageIcon("trash.gif"));
lo.setActionCommand("trash");
lo.addActionListener(this);
lo.setBorderPainted(false);
lo.setToolTipText("trash");
JButton in = new JButton(new ImageIcon("info.gif"));
in.setActionCommand("Information");
in.addActionListener(this);
in.setBorderPainted(false);
in.setToolTipText("Information");
icon.add(newMails);
icon.add(creator);
icon.add(rep);
icon.add(fwd);
icon.add(set);
icon.add(adr);
icon.add(lo);
icon.add(in);
Vector h1 = myLeser.lese("Summary.4on");
for(int i=0; i<h1.size(); i+=7){
String id = h1.elementAt(i).toString();
String fo = h1.elementAt(i+1).toString();
String su = h1.elementAt(i+2).toString();
String fr = h1.elementAt(i+3).toString();
String to = h1.elementAt(i+4).toString();
String da = h1.elementAt(i+5).toString();
String re = h1.elementAt(i+6).toString();
MailIndex index = new MailIndex(id, fo, su, fr, to, da, re);
mailIndexVector.addElement(index);
Vector h2 = myReader.read("Filter.4on");
for(int j=0; j<h2.size(); j+=3){
String fo = h2.elementAt(j).toString();
String from = h2.elementAt(j+1).toString();
String te = h2.elementAt(j+2).toString();
FilterIndex index = new FilterIndex(fo, from, te);
filterIndexVector.addElement(index);
folderVector = myReader.read("Folder.4on");
DefaultMutableTreeNode top, inbox, outbox, sentbox, trash;
top = new DefaultMutableTreeNode("mails");
top.add(inbox = new DefaultMutableTreeNode("Inbox"));
for(int i=0; i<mailIndexVector.size(); i++){
MailIndex m = (MailIndex)mailIndexVector.elementAt(i);
if (m.folder.equals("Inbox"))
inbox.add(new DefaultMutableTreeNode(m));
top.add(outbox = new DefaultMutableTreeNode("Outbox"));
for(int i=0; i<mailIndexVector.size(); i++){
MailIndex m = (MailIndex)mailIndexVector.elementAt(i);
if (m.folder.equals("Outbox")){
outbox.add(new DefaultMutableTreeNode(m));
top.add(sentbox = new DefaultMutableTreeNode("Sentbox"));
for(int i=0; i<mailIndexVector.size(); i++){
MailIndex m = (MailIndex)mailIndexVector.elementAt(i);
if (m.folder.equals("Sentbox"))
sentbox.add(new DefaultMutableTreeNode(m));
for(int j=0; j<folderVector.size(); j++){
top.add(trash =
new DefaultMutableTreeNode(folderVector.elementAt(j).toString()));
for(int i=0; i<mailIndexVector.size(); i++){
MailIndex m = (MailIndex)mailIndexVector.elementAt(i);
if (m.folder.equals(folderVector.elementAt(j).toString()))
trash.add(new DefaultMutableTreeNode(m));
tree = new JTree(top);
tree.getSelectionModel().setSelectionMode
(TreeSelectionModel.SINGLE_TREE_SELECTION);
tree.addTreeSelectionListener(new myTreeSelectionListener());
treeScroll = new JScrollPane(tree);
treeScroll.setFont(new Font("Monospaced",Font.PLAIN,6));
baum.add("Center", treeScroll);
MainMenu menuBar = new MainMenu(this, this);
setJMenuBar(menuBar);
setVisible(true);
public void mailsFetcher() {
myLetterman = new Letterman(this, mySetup);
myLetterman.start();
public void treeNewSign(){
trae.remove(treeScroll);
DefaultMutableTreeNode top, inbox, outbox, sentbox, trash;
top = new DefaultMutableTreeNode("mails");
top.add(inbox = new DefaultMutableTreeNode("Inbox"));
for(int i=0; i<mailIndexVector.size(); i++){
MailIndex m = (MailIndex)mailIndexVector.elementAt(i);
if (m.folder.equals("Inbox"))
inbox.add(new DefaultMutableTreeNode(m));
top.add(outbox = new DefaultMutableTreeNode("Outbox"));
for(int i=0; i<mailIndexVector.size(); i++){
MailIndex m = (MailIndex)mailIndexVector.elementAt(i);
if (m.folder.equals("Outbox"))
outbox.add(new DefaultMutableTreeNode(m));
top.add(sentbox = new DefaultMutableTreeNode("Sentbox"));
for(int i=0; i<mailIndexVector.size(); i++){
MailIndex m = (MailIndex)mailIndexVector.elementAt(i);
if (m.folder.equals("Sentbox"))
sentbox.add(new DefaultMutableTreeNode(m));
for(int j=0; j<folderVector.size(); j++){
top.add(trash =
new DefaultMutableTreeNode(folderVector.elementAt(j).toString()));
for(int i=0; i<mailIndexVector.size(); i++){
MailIndex m = (MailIndex)mailIndexVector.elementAt(i);
if (m.folder.equals(folderVector.elementAt(j).toString()))
trash.add(new DefaultMutableTreeNode(m));
tree = new JTree(top);
tree.getSelectionModel().setSelectionMode
(TreeSelectionModel.SINGLE_TREE_SELECTION);
tree.addTreeSelectionListener(new myTreeSelectionListener());
treeScroll = new JScrollPane(tree);
trae.add("Center", treeScroll);
trae.repaint();
setVisible(true);
public void menuNewSign(){
setJMenuBar(new MainMenu(this, this));
setVisible(true);
public String fromFilter (String t){
String myFrom = "";
int start, end;
int a = t.indexOf("From:");
if (a != -1){
start = a + 6;
ende = t.indexOf("\n",start);
myFrom = t.substring(start,end);
return myFrom;
public String toFilter (String t){
String myTo = "";
int start, e1, e2, end;
int a = t.indexOf("To:");
if (a != -1){
start = a + 4;
end = t.indexOf("\n",start);
myTo = t.substring(start,end);
e1 = end + 1;
if(t.substring(e1,e1+1).equals(" ")){
while(t.substring(e1,e1+1).equals(" ")){
while(t.substring(e1,e1+1).equals(" "))
e1++;
e2 = t.indexOf("\n",e1);
myTo += " " + t.substring(e1,e2);
e1 = e2 + 1;
return myTo;
public String dateFilter (String t){
String myDate = "";
int start, end;
int a = t.indexOf("Date:");
if (a != -1){
start = a + 6;
end = t.indexOf("\n",start);
myDate = t.substring(start,end);
return myDate;
public String subjectFilter (String t){
String mySubject = "";
int start, end;
int a = t.indexOf("Subject:");
if (a != -1){
start = a + 9;
end = t.indexOf("\n",start);
mySubject = t.substring(start,end);
return mySubject;
public String mailFilter (String t){
String myMail = "";
int start = 0, end = t.length();
start = t.indexOf("\n\n") + 2;
if (start != 1){
int a = t.indexOf("\n\n" ,start);
if (a != -1){
if (t.indexOf(".",a+2) == a+2)
if (t.indexOf("\n",a+3) == a+3)
start = a;
myMail = t.substring(start,end);
return myMail;
public void mailsRemark(String file){
String mail = "", t = "";
Vector mailVector = myReader.read(file);
for (int i=0; i<mailVector.size(); i++)
t += (String)mailVector.elementAt(i) + "\n";
from = fromFilter(t);
subject = subjectFilter(t);
mailBody = mailFilter(t);
mail += "Subject: " + subject + "\n";
mail += "Date: " + dateFilter(t) + "\n";
mail += "From: " + from + "\n";
mail += "To: " + toFilter(t) + "\n";
mail += "\n" + mailBody;
if(viewSource == true)
ta.setText(t);
else
ta.setText(mail);
public synchronized void mails(String t){
Status myStatus = new Status(this,t);
myStatus.start();
public void delete(){
if(tree.getLastSelectedPathComponent() != null){
DefaultMutableTreeNode node =
(DefaultMutableTreeNode)tree.getLastSelectedPathComponent();
if(node.isLeaf()){
Object nodeInfo = node.getUserObject();
if(nodeInfo instanceof MailIndex){
MailIndex index = (MailIndex)nodeInfo;
mailIndexVector.removeElement(index);
int count = 0;
for(int j=0; j<mailIndexVector.size(); j++){
MailIndex index1 = (MailIndex)mailIndexVector.elementAt(j);
String id = index1.mailId;
if(id.equals(index.mailId))
count++;
if(count == 0){
File home = new File(".");
String mailsRemark = "." + home.separator + "data";
File datei = new File(mailsRemark, index.mailId);
datei.delete();
treeNewSign();
menuNewSign();
else{
String t = (String)nodeInfo;
boolean toDelete = false;
for (int i=0; i<folderVector.size(); i++){
if(folderVector.elementAt(i).equals(t)){
folderVector.removeElement(t);
konnteLoeschen = true;
if(toDelete == false){
message("This folder can not be deleted!");
treeNewSign();
else
message("Folder is not Empty! Please delete Your mails.");
else
message("No Mails where selected to be deleted!");
public void forward(){
if(from != null){
creatorOeffnen();
myCreator.tfSb.setText("Fwd to: " + subject);
myCreator.ta.setText("<" + from + ">" + " wrote:\n\n" + mailBody +
"\n\n>\n>\n\n");
public void reply(){
if(from != null){
creatorOeffnen();
myCreator.tfTo.setText(from);
myCreator.tfSb.setText("Reply to: " + subject);
myCreator.ta.setText("<" + from + ">" + " wrote:\n\n" + mailBody +
"\n\n>\n>\n\n");
public void end(){
String h = "";
for (int i=0; i<mailIndexVector.size(); i++){
MailIndex index = (MailIndex)mailIndexVector.elementAt(i);
h += index.mailId + "\n";
h += index.folder + "\n";
h += index.subject + "\n";
h += index.from + "\n";
h += index.to + "\n";
h += index.date + "\n";
h += index.read + "\n";
myWriter.writer(h,"Summary.4on");
String w = "";
for (int l=0; l<filterIndexVector.size(); l++){
FilterIndex index = (FilterIndex)filterIndexVector.elementAt(l);
w += index.folder + "\n";
w += index.from + "\n";
w += index.text + "\n";
myWriter.write(w,"Filter.4on");
String k = "";
for(int j=0; j<folderVector.size(); j++)
k += folderVector.elementAt(j).toString() + "\n";
myWriter.writer(k,"Folder.4on");
String t = "";
for (int l=0; l<myAddressBook.addressIndexVector.size(); l++){
AddressIndex aindex =
(AddressIndex)myAdressBook.adressIndexVector.elementAt(l);
t += aindex.alias + "\n";
t += aindex.email + "\n";
myWriter.write(t,"Address.4on");
setVisible(false);
dispose();
System.exit(0);
public void filterOpen(){
boolean test = false;
if(tree.getLastSelectedPathComponent() != null){
DefaultMutableTreeNode node =
(DefaultMutableTreeNode)tree.getLastSelectedPathComponent();
Object nodeInfo = node.getUserObject();
if(nodeInfo instanceof String){
myFilter.folder = (String)nodeInfo;
for(int i=0; i<filterIndexVector.size(); i++){
FilterIndex h = (FilterIndex)filterIndexVector.elementAt(i);
if(h.folder.equals(nodeInfo)){
myFilter.index = h;
test = true;
if(h.from.equals("")){
myFilter.box1 = false;
myFilter.fTf.setText("");
myFilter.fBox.setSelected(false);
myFilter.fTf.setEditable(false);
else{
myFilter.box1 = true;
myFilter.fTf.setText(h.from);
myFilter.fBox.setSelected(true);
myFilter.fTf.setEditable(true);
if(h.text.equals("")){
myFilter.box2 = false;
myFilter.tTf.setText("");
myFilter.tBox.setSelected(false);
myFilter.tTf.setEditable(false);
else{
myFilter.box2 = true;
myFilter.tTf.setText(h.text);
myFilter.tBox.setSelected(true);
myFilter.tTf.setEditable(true);
break;
myFilter.setVisible(true);
myFilter.fBox.requestFocus();
else
meldung("No selection");
public void sendOutbox(){
fromOutbox = true;
int i;
Block1:
for(i=0; i<mailIndexVector.size(); i++){
MailIndex index = (MailIndex)mailIndexVector.elementAt(i);
if(index.folder.equals("Outbox")){
Vector mailVector = myReader.read(index.mailId);
Block2:
for(int j=0; j<mailVector.size(); j++){
String m = (String)mailVector.elementAt(j);
if(m.indexOf("Subject:") != -1){
for(int k=0; k<=j+1; k++){
mailVector.removeElementAt(0);
break Block2;
Vector toVector = new Vector();
int tEnd = 1;
String line = "";
String t = index.to;
while (tEnd != -1){
tEnd = t.indexOf(", ");
if (tEnd == -1)
line = t;
else
line = t.substring(0,tEnd);
t = t.substring(tEnd + 1);
toVector.addElement(line);
File home = new File(".");
String mailsVerzeichnis = "." + home.separator + "data";
File datei = new File(mailsRemark, index.mailId);
datei.delete();
mySendman = new Sendman(mailVector, toVector, index.subject,ailsAnzeig, mySetup, this);
mySendman.start();
mailIndexVector.removeElement(index);
break Block1;
if(i == mailIndexVector.size())
fromOutbox = false;
treeNewSign();
public void partion(String cmd){
if(tree.getLastSelectedPathComponent() != null){
DefaultMutableTreeNode node =
(DefaultMutableTreeNode)tree.getLastSelectedPathComponent();
Object nodeInfo = node.getUserObject();
if(nodeInfo instanceof MailIndex){
MailIndex index = (MailIndex)nodeInfo;
index.folder = cmd.substring(13).toString();
treeNewSign();
else
meldung("No mails to partion!");
public void SetupOpen(){
if (mySetup.savePassword == false)
mySetup.pTf.setText("");
mySetup.setVisible(true);
mySetup.aTf.requestFocus();
public void addressbookOpen(){
myAddressBook.setVisible(true);
myAdressBook.tree.requestFocus();
public void creatorOpen(){
myCreator.setVisible(true);
myCreator.tfTo.requestFocus();
public void actionPerformed(ActionEvent event){
Object obj = event.getSource();
if (obj instanceof JMenuItem){
String cmd = event.getActionCommand();
if (cmd.equals("New fetched")){
mailsfetch();
else if (cmd.equals("Written new mails")) {
creatorOpen();
else if (cmd.equals("Reply")) {
reply();
else if (cmd.equals("Forward")) {
forward();
else if (cmd.equals("Outbox")) {
sendOutbox();
else if (cmd.equals("Delete")) {
delete();
else if ((cmd.length() >13) &&
(cmd.substring(0,13).equals("Sorting-"))){
sorting(cmd);
else if (cmd.equals("Using Addressbook")){
addressbookOpen();
else if (cmd.equals("Filter working")){
filterOpen();
else if (cmd.equals("New Order")){
myFixTask.tf.setText("");
myFixTask.setVisible(true);
myFixTask.tf.requestFocus();
else if (cmd.equals("delete")){
delete();
else if ((cmd.length() >7) &&
(cmd.substring(0,7).equals("nobody"))){
if(viewSource == false){
viewSource = true;
menuNewSign();
if(tree.getLastSelectedPathComponent() != null){
DefaultMutableTreeNode node =
(DefaultMutableTreeNode)tree.getLastSelectedPathComponent();
Object nodeInfo = node.getUserObject();
if(nodeInfo instanceof MailIndex){
MailIndex index = (MailIndex)nodeInfo;
mailsRemark(index.mailId);
else{
viewSource = false;
menuNeuZeichnen();
if(tree.getLastSelectedPathComponent() != null){
DefaultMutableTreeNode node =
(DefaultMutableTreeNode)tree.getLastSelectedPathComponent();
Object nodeInfo = node.getUserObject();
if(nodeInfo instanceof MailIndex){
MailIndex index = (MailIndex)nodeInfo;
mailsRemark(index.mailId);
else if (cmd.equals("Setup")){
SetupOpen();
else if (obj instanceof JButton){
String cmd = event.getActionCommand();
if (cmd.equals("aga")){
mailsHolen();
else if (cmd.equals("Creator Open")){
creatorOpem();
else if(cmd.equals("rep")){
reply();
else if(cmd.equals("fwd")){
forward();
else if(cmd.equals("Setup Open")){
SetupOpen();
else if(cmd.equals("adr")){
addressbookOpen();
else if(cmd.equals("delete")){
delete();
else if(cmd.equals("Information")){
myInfo.setVisible(true);
myInfo.b.requestFocus();
private class myWindowListener extends WindowAdapter{
public void windowClosing(WindowEvent event){
end();
private class myTreeSelectionListener implements TreeSelectionListener{
public void valueChanged(TreeSelectionEvent e) {
DefaultMutableTreeNode node =
(DefaultMutableTreeNode)(e.getPath().getLastPathComponent());
Object nodeInfo = node.getUserObject();
if(nodeInfo instanceof MailIndex){
MailIndex index = (MailIndex)nodeInfo;
mailsAnzeigen(index.mailId);
index.read = "Yes";
} -
Trouble compiling for printed documentation
hello, i am having trouble compiling a new document layout i
have created, i have followed peter grainges instructions on his
website but it always fails to generate straight away. Im using
Robohelp x5 with word 2000, does anyone have any ideas?
thanks steveSteve
Was RH installed on the PC you are using with you logon or
that of the person whose job you have taken over? It sounds very
much like the latter and this is exactly what I would expect to
happen.
Try creating a new project with just a couple of topics and
printing from that. It will likely also fail. If it does that
pretty much confirms my theory. Uninstall and reinstall RH with
your logon and with admin rights attached and the problem will
likely go away. -
Trouble compiling a stored procedure
Hello, I have trouble compiling a stored procedure. I include part of the code because I think the key problem is illustrated in these lines:
date1 is declared as a DATE.
index_value2 NUMBER;
BEGIN
date1 := (select sysdate from dual);
index_value2 := (select index_value from tmsdat.a_index_values where price_date < (SELECT sysdate -180
FROM dual) and price_date > (SELECT sysdate -210
FROM dual));
[\code]
The problem seems to be that a more complex syntax is included in the allocation statement (:=), can that be the case? That is, no select etc??
How is this solved?
Any help much appreciated!
best regards
HaraldWell, actually WhiteHat´s magic did the trick, but two errors:
temp := (select (to_number(to_char(sysdate, 'DD'))-1)/(decode(to_char(sysdate,'MM'),'02',28,30)) as result
from dual);
[\code]
this line generates problems but I think the approach is the same maybe, that is:
select to_number(to_char(sysdate, 'DD'))-1)/(decode(to_char(sysdate,'MM'),'02',28,30)) into temp as result frmo dual
Further, some error about encountering end of line?
END CONVERT_MARKET_INDEX; -
Trouble compiling servlet example
Hi All, I am trying out an example for servlets and I ran into trouble compiling the the file called "FormProcessingServlet.java" in tutorial located here: http://developer.java.sun.com/developer/onlineTraining/Servlets/Fundamentals/magercises/FormPostingAndProcessing/index.html
The exact problem happens in this line:
isStructure = context.getResourceAsStream(paramStructureFile[0]);
The error says:
FormProcessingServlet.java:127: cannot resolve symbol
symbol : method getResourceAsStream (java.lang.String)
location: interface javax.servlet.ServletContext
isStructure = context.getResourceAsStream(paramStructureFile[0]);
anyone else ran into this problem? How do I fix this? Thanks."cannot resolve symbol" means that the JVM can't find a particular class.
Adjust your systems classpath variable to include all the jar files that you use, I also add "." to include files in the current directory I'm working from. -
I am a total newbie at programming and I am having trouble compiling. In the MS-DOS prompt, I located the folder where my .java file is located and typed the following:
javac SampleProgram.java
I received a "Bad command or file name" error. I am typing the names correctly. I am using Java 2 SDK, Standard Edition Version 1.3.1. Am I doing something wrong?
Thanks for any help.That should fix it. The problem is that DOS needs to know where to find the executable files like javac.exe
You can either set the path temporarily by typing
SET PATH=.;c:\jdk1.3.1\bin
at the command prompt each time you open a command window, or you can set it more permanently by adding it to your startup config. This will depend on your OS. On win 98 for example, there is an AUTOEXEC.BAT (usually with a SET PATH command already present). You could open this in notepad to add/change:
SET PATH=C:\WINDOWS
to
SET PATH=C:\WINDOWS;.;C:\JDK1.3.1\BIN
Reboot to make the changes take effect. Other OS's may have a special dialog to set this kind of command.
Hope this helps some. -
Hi everyone,
I'm trying to compile gtk+ 2.13.7, but Make fails with an error about libcairo.
As far as I know, I've successfully compiled all of gtk's dependencies, but for
some reason gtk is looking for libcairo in my X11 directory instead of in my
/usr/local/lib directory. This is on OS X 10.5.4, and I've compiled everything
myself (not using fink or darwin ports). Here's the last part of the Make output:
<pre>
Extracting /Users/jeff/Desktop/gtk+-2.13.7/gdk/x11/.libs/libgdk-x11.a
(cd .libs/libgdk-x11-2.0.lax/libgdk-x11.a && ar x /Users/jberman/Downloads/forPan/gtk+-2.13.7/gdk/x11/.libs/libgdk-x11.a)
sed 's,^,_,' < .libs/libgdk-x11-2.0.exp > .libs/libgdk-x11-2.0-symbols.expsym
gcc -dynamiclib ${wl}-flat_namespace ${wl}-undefined ${wl}suppress -o .libs/libgdk-x11-2.0.0.1307.0.dylib .libs/gdk.o .libs/gdkapplaunchcontext.o .libs/gdkcairo.o .libs/gdkcolor.o .libs/gdkcursor.o .libs/gdkdisplay.o .libs/gdkdisplaymanager.o .libs/gdkdnd.o .libs/gdkdraw.o .libs/gdkevents.o .libs/gdkfont.o .libs/gdkgc.o .libs/gdkglobals.o .libs/gdkimage.o .libs/gdkkeys.o .libs/gdkkeyuni.o .libs/gdkpango.o .libs/gdkpixbuf-drawable.o .libs/gdkpixbuf-render.o .libs/gdkpixmap.o .libs/gdkpolyreg-generic.o .libs/gdkrectangle.o .libs/gdkregion-generic.o .libs/gdkrgb.o .libs/gdkscreen.o .libs/gdkselection.o .libs/gdkvisual.o .libs/gdkwindow.o .libs/gdkwindowimpl.o .libs/gdkenumtypes.o .libs/libgdk-x11-2.0.lax/libgdk-x11.a/gdkapplaunchcontext-x11.o .libs/libgdk-x11-2.0.lax/libgdk-x11.a/gdkasync.o .libs/libgdk-x11-2.0.lax/libgdk-x11.a/gdkcolor-x11.o .libs/libgdk-x11-2.0.lax/libgdk-x11.a/gdkcursor-x11.o .libs/libgdk-x11-2.0.lax/libgdk-x11.a/gdkdisplay-x11.o
.libs/libgdk-x11-2.0.lax/libgdk-x11.a/gdkdnd-x11.o .libs/libgdk-x11-2.0.lax/libgdk-x11.a/gdkdrawable-x11.o .libs/libgdk-x11-2.0.lax/libgdk-x11.a/gdkevents-x11.o .libs/libgdk-x11-2.0.lax/libgdk-x11.a/gdkfont-x11.o .libs/libgdk-x11-2.0.lax/libgdk-x11.a/gdkgc-x11.o .libs/libgdk-x11-2.0.lax/libgdk-x11.a/gdkgeometry-x11.o .libs/libgdk-x11-2.0.lax/libgdk-x11.a/gdkglobals-x11.o .libs/libgdk-x11-2.0.lax/libgdk-x11.a/gdkim-x11.o .libs/libgdk-x11-2.0.lax/libgdk-x11.a/gdkimage-x11.o .libs/libgdk-x11-2.0.lax/libgdk-x11.a/gdkinput-none.o .libs/libgdk-x11-2.0.lax/libgdk-x11.a/gdkinput.o .libs/libgdk-x11-2.0.lax/libgdk-x11.a/gdkkeys-x11.o .libs/libgdk-x11-2.0.lax/libgdk-x11.a/gdkmain-x11.o .libs/libgdk-x11-2.0.lax/libgdk-x11.a/gdkpixmap-x11.o .libs/libgdk-x11-2.0.lax/libgdk-x11.a/gdkproperty-x11.o .libs/libgdk-x11-2.0.lax/libgdk-x11.a/gdkscreen-x11.o .libs/libgdk-x11-2.0.lax/libgdk-x11.a/gdkselection-x11.o .libs/libgdk-x11-2.0.lax/libgdk-x11.a/gdkspawn-x11.o
.libs/libgdk-x11-2.0.lax/libgdk-x11.a/gdktestutils-x11.o .libs/libgdk-x11-2.0.lax/libgdk-x11.a/gdkvisual-x11.o .libs/libgdk-x11-2.0.lax/libgdk-x11.a/gdkwindow-x11.o .libs/libgdk-x11-2.0.lax/libgdk-x11.a/gdkxftdefaults.o .libs/libgdk-x11-2.0.lax/libgdk-x11.a/gdkxid.o .libs/libgdk-x11-2.0.lax/libgdk-x11.a/xsettings-client.o .libs/libgdk-x11-2.0.lax/libgdk-x11.a/xsettings-common.o -L/usr/X11/lib /usr/X11/lib/libXinerama.1.0.0.dylib /usr/X11/lib/libXdmcp.6.0.0.dylib /usr/X11/lib/libXau.6.0.0.dylib /usr/X11/lib/libXext.6.4.0.dylib /usr/X11/lib/libX11.6.2.0.dylib -L/usr/local/lib /usr/local/lib/libpangocairo-1.0.dylib /usr/local/lib/libcairo.dylib /usr/local/lib/libpng12.dylib /usr/X11/lib/libXrender.1.3.0.dylib /usr/X11/lib/libSM.6.0.0.dylib /usr/X11/lib/libICE.6.3.0.dylib /usr/local/lib/libpixman-1.dylib /usr/local/lib/libpangoft2-1.0.dylib /usr/local/lib/libfontconfig.dylib /usr/lib/libiconv.dylib /usr/local/lib/libfreetype.dylib /usr/lib/libz.dylib
/usr/lib/libexpat.dylib /usr/local/lib/libpango-1.0.dylib /usr/lib/libc.dylib /usr/lib/libm.dylib /usr/X11/lib/libcairo.2.17.5.dylib /usr/X11/lib/libfreetype.dylib /usr/local/lib/libgio-2.0.dylib /usr/local/lib/libgobject-2.0.dylib /usr/local/lib/libgmodule-2.0.dylib /usr/local/lib/libglib-2.0.dylib /usr/local/lib/libintl.dylib /usr/X11/lib/libfontconfig.dylib -lm ../gdk-pixbuf/.libs/libgdk_pixbuf-2.0.dylib -install_name /usr/local/lib/libgdk-x11-2.0.0.dylib -compatibility_version 1308 -current_version 1308.0 -Wl,-single_module -Wl,-exportedsymbolslist,.libs/libgdk-x11-2.0-symbols.expsym
i686-apple-darwin9-gcc-4.0.1: /usr/X11/lib/libcairo.2.17.5.dylib: No such file or directory
make[4]: * [libgdk-x11-2.0.la] Error 1
make[3]: * [all-recursive] Error 1
make[2]: * [all] Error 2
make[1]: * [all-recursive] Error 1
make: * [all] Error 2
</pre>
Does anyone have any idea why it would suddenly look for libcairo in
/usr/X11/lib when pango found the correct libcairo? Any ideas on how to get
around this? A few months ago I actually successfully compiled GTK on a
different Mac, so I know it can be done. Help!
Thanks!I think you just need to do that for whatever library (or libraries) you want to explicitly direct it to.
It might be easier first to try
LDFLAGS="-L/path/to/your/lib"
configure --help
will tell you more about how explicitly to feed in the information.
Nobody "needs" to use fink, but I find with stuff like gtk+2, which I care about only because I need it to run programs I am interested in, it is far easier to let an expert worry about how to make it work.
What works or does not work out of the box is highly package-dependent. As time goes on, more and more developers try to make their stuff work out of the box for OS X.
Here's the version of gtk+2 I have installed with fink, fwiw:
fink list gtk+2
Information about 7126 packages read in 1 seconds.
i gtk+2 2.12.11-2 The Gimp Toolkit
Not quite as new as 2.14, but a lot closer. (I use fink "unstable", which more accurately translates to "current.")
There are several vocal people who post here who think no one should use fink or darwinports. It is simply a matter of personal preference. But if you want to roll your own, sometimes it is worth peaking to see how the packages are tweaked by the fink maintainers (browse the .info files). -
Trouble Compiling mysql-query-browser
After building all of the necesary prerequsites I am trying to compile mysql-query-browser on Solaris 10 (x86). I am getting some errors (shown below) when I run the configure script for the mysql-gui-common components. Can anyone tell me how I might fix these errors?
---configure output---
checking for a BSD-compatible install... /opt/sfw/bin/ginstall -c
checking whether build environment is sane... yes
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking build system type... i386-pc-solaris2.10
checking host system type... i386-pc-solaris2.10
checking for gcc... gcc
checking for C compiler default output... a.out
checking whether the C compiler works... yes
checking whether we are cross compiling... no
checking for suffix of executables...
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ANSI C... none needed
checking for style of include used by make... GNU
checking dependency style of gcc... gcc3
checking for g++... g++
checking whether we are using the GNU C++ compiler... yes
checking whether g++ accepts -g... yes
checking dependency style of g++... gcc3
checking for ranlib... ranlib
checking for pkg-config... /usr/bin/pkg-config
checking for glib-2.0 libxml-2.0 >= 2.6.2... yes
checking GLIB_CFLAGS... -I/usr/local/include/glib-2.0 -I/usr/local/lib/glib-2.0/include -I/usr/include/libxml2
checking GLIB_LIBS... -L/usr/local/lib -lglib-2.0 -lxml2 -lpthread -lz -lm -lsocket -lnsl
checking for gthread-2.0 libxml-2.0 >= 2.6.2... yes
checking GTHREAD_CFLAGS... -threads -I/usr/local/include/glib-2.0 -I/usr/local/lib/glib-2.0/include -I/usr/include/libxml2
checking GTHREAD_LIBS... -threads -L/usr/local/lib -lgthread-2.0 -lglib-2.0 -lxml2 -lpthread -lz -lm -lsocket -lnsl
checking for gtk+-2.0... yes
checking GTK_CFLAGS... -I/usr/local/include/gtk-2.0 -I/usr/local/lib/gtk-2.0/include -I/usr/local/include/atk-1.0 -I/usr/local/include/pango-1.0 -I/usr/openwin/include -I/usr/sfw/include -I/usr/sfw/include/freetype2 -I/usr/local/include/glib-2.0 -I/usr/local/lib/glib-2.0/include
checking GTK_LIBS... -L/usr/local/lib -lgtk-x11-2.0 -lgdk-x11-2.0 -latk-1.0 -lgdk_pixbuf-2.0 -lm -lpangoxft-1.0 -lpangox-1.0 -lpango-1.0 -lgobject-2.0 -lgmodule-2.0 -lglib-2.0
checking for libglade-2.0 gtkmm-2.0... yes
checking GNOME_CFLAGS... -I/usr/local/include/gtk-2.0 -I/usr/local/lib/gtk-2.0/include -I/usr/local/include/atk-1.0 -I/usr/local/include/pango-1.0 -I/usr/openwin/include -I/usr/sfw/include -I/usr/sfw/include/freetype2 -I/usr/local/include/glib-2.0 -I/usr/local/lib/glib-2.0/include -I/usr/local/include/gtkmm-2.0 -I/usr/local/lib/gtkmm-2.0/include -I/usr/local/lib/sigc++-1.2/include -I/usr/local/include/sigc++-1.2 -I/usr/include/libglade-2.0 -I/usr/include/libxml2
checking GNOME_LIBS... -L/usr/local/lib -lglade-2.0 -lxml2 -lpthread -lz -lsocket -lnsl -lgtkmm-2.0 -lgdkmm-2.0 -latkmm-1.0 -lgtk-x11-2.0 -lpangomm-1.0 -lglibmm-2.0 -lsigc-1.2 -lgdk-x11-2.0 -latk-1.0 -lgdk_pixbuf-2.0 -lm -lpangoxft-1.0 -lpangox-1.0 -lpango-1.0 -lgobject-2.0 -lgmodule-2.0 -lglib-2.0
checking for mysql_config... -I'/usr/sfw/include/mysql'
checking for mysql_config... Usage: /usr/sfw/bin/mysql_config [OPTIONS]
Options:
--cflags [-I'/usr/sfw/include/mysql']
--libs [-R/usr/sfw/lib -R/usr/sfw/lib/mysql -L/usr/sfw/lib -L'/usr/sfw/lib/mysql' -lmysqlclient -lz -lposix4 -lcrypt -lgen -lsocket -lnsl -lm] --socket [tmp/mysql.sock]
--port [3306]
--version [4.0.15]
--libmysqld-libs [-R/usr/sfw/lib -R/usr/sfw/lib/mysql -L/usr/sfw/lib -L'/usr/sfw/lib/mysql' -lmysqld -lpthread -lz -lposix4 -lcrypt -lgen -lsocket -lnsl -lm -lpthread -lrt]
checking for pcre-config... yes
checking for pcre-config... -L/opt/sfw/lib -lpcre
configure: creating ./config.status
config.status: creating Makefile
sed: command garbled: s,@MYSQL_LIBS@,Usage: /usr/sfw/bin/mysql_config [OPTIONS]
config.status: creating library/Makefile
sed: command garbled: s,@MYSQL_LIBS@,Usage: /usr/sfw/bin/mysql_config [OPTIONS]
config.status: creating library/source/Makefile
sed: command garbled: s,@MYSQL_LIBS@,Usage: /usr/sfw/bin/mysql_config [OPTIONS]
config.status: creating library_grt/Makefile
sed: command garbled: s,@MYSQL_LIBS@,Usage: /usr/sfw/bin/mysql_config [OPTIONS]
config.status: creating library_grt/source/Makefile
sed: command garbled: s,@MYSQL_LIBS@,Usage: /usr/sfw/bin/mysql_config [OPTIONS]
config.status: creating library_grt_modules/Makefile
sed: command garbled: s,@MYSQL_LIBS@,Usage: /usr/sfw/bin/mysql_config [OPTIONS]
config.status: creating library_grt_modules/source/Makefile
sed: command garbled: s,@MYSQL_LIBS@,Usage: /usr/sfw/bin/mysql_config [OPTIONS]
config.status: creating library_gc/Makefile
sed: command garbled: s,@MYSQL_LIBS@,Usage: /usr/sfw/bin/mysql_config [OPTIONS]
config.status: creating library_gc/source/Makefile
sed: command garbled: s,@MYSQL_LIBS@,Usage: /usr/sfw/bin/mysql_config [OPTIONS]
config.status: creating source/Makefile
sed: command garbled: s,@MYSQL_LIBS@,Usage: /usr/sfw/bin/mysql_config [OPTIONS]
config.status: creating source/grtsh/Makefile
sed: command garbled: s,@MYSQL_LIBS@,Usage: /usr/sfw/bin/mysql_config [OPTIONS]
config.status: creating source/linux/Makefile
sed: command garbled: s,@MYSQL_LIBS@,Usage: /usr/sfw/bin/mysql_config [OPTIONS]
config.status: creating source/linux/canvas/Makefile
sed: command garbled: s,@MYSQL_LIBS@,Usage: /usr/sfw/bin/mysql_config [OPTIONS]
config.status: creating images/Makefile
sed: command garbled: s,@MYSQL_LIBS@,Usage: /usr/sfw/bin/mysql_config [OPTIONS]
config.status: creating images/png/Makefile
sed: command garbled: s,@MYSQL_LIBS@,Usage: /usr/sfw/bin/mysql_config [OPTIONS]
config.status: creating images/icons/Makefile
sed: command garbled: s,@MYSQL_LIBS@,Usage: /usr/sfw/bin/mysql_config [OPTIONS]
config.status: creating images/icons/png/Makefile
sed: command garbled: s,@MYSQL_LIBS@,Usage: /usr/sfw/bin/mysql_config [OPTIONS]
config.status: creating res/Makefile
sed: command garbled: s,@MYSQL_LIBS@,Usage: /usr/sfw/bin/mysql_config [OPTIONS]
config.status: creating res/linux/Makefile
sed: command garbled: s,@MYSQL_LIBS@,Usage: /usr/sfw/bin/mysql_config [OPTIONS]
config.status: creating library/tests/Makefile
sed: command garbled: s,@MYSQL_LIBS@,Usage: /usr/sfw/bin/mysql_config [OPTIONS]
config.status: creating library/tests/read_international/Makefile
sed: command garbled: s,@MYSQL_LIBS@,Usage: /usr/sfw/bin/mysql_config [OPTIONS]
config.status: creating library/tests/test_detect_charset/Makefile
sed: command garbled: s,@MYSQL_LIBS@,Usage: /usr/sfw/bin/mysql_config [OPTIONS]
config.status: creating library/tests/test_mysql_api/Makefile
sed: command garbled: s,@MYSQL_LIBS@,Usage: /usr/sfw/bin/mysql_config [OPTIONS]
config.status: creating library/tests/test_parse_sql_statemets/Makefile
sed: command garbled: s,@MYSQL_LIBS@,Usage: /usr/sfw/bin/mysql_config [OPTIONS]
config.status: creating library/tests/test_translations/Makefile
sed: command garbled: s,@MYSQL_LIBS@,Usage: /usr/sfw/bin/mysql_config [OPTIONS]
config.status: creating library/tests/test_xml/Makefile
sed: command garbled: s,@MYSQL_LIBS@,Usage: /usr/sfw/bin/mysql_config [OPTIONS]
config.status: executing depfiles commandsI agree that it is entirely possible that the problem lies with mySQL and not Sun, however the query I posted on their forums is sitting in deathly silence so I'm now trying elsewhere.
After making the change you mentioned it configures clean but it doesn't buil properly afterward, I presume this is the same for you. -
Trouble compiling package with JDK 1.4
Hi,
I just installed JDK 1.4 on a new machine, now I have trouble running compile scripts that used to work on my old machine. The old an new are configured with Win 2000. The following compiles without problem:
javac -classpath "..." -d "..." "c:\.....\com\...\some package\MyClass.java"
Changing this statemetn to:
javac -classpath "..." -d "..." "c:\.....\com\...\some package\*.java"
should compile all Java files in 'some package', instead what I get is the following error message:
error: cannot read: c:\.....\com\...\some package\*.java
The documentation says that this should still work. Anyone aware of changes in 1.4 that could cause this problem?
Thanks for respondingAs a work-around, you can use some Unix-styled shell (that is, command processor) which expands the *.expression into the list of the matching file names, thus releaving javac from this task. (Caveat: directory names with a space inside will cause problems.)
I can recommend the Cygnus package (including the command processor "bash") or "MinGW", the Minimalist GNU For Windows with its simpler sh:
http://www.mingw.org/
ftp://ftp.franken.de/pub/win32/develop/gnuwin32/mingw32/porters/Mikey/ -
I'm trying to write a rock, paper, scissors program but am having trouble converting an integer to its appropriate string. Here is the code I have:
// Rock.java
// Play Rock, Paper, Scissors with the user
import java.util.Scanner;
import java.util.Random;
public class Rock
public static void main(String[] args)
String personPlay; //User's play -- "R", "P", or "S"
String computerPlay; //Computer's play -- "R", "P", or "S"
int computerInt; //Randomly generated number used to determine
//computer's play
Scanner scan = new Scanner(System.in);
Random generator = new Random();
computerInt = generator.nextInt(3);//Generate computer's play (0,1,2)
//Translate computer's randomly generated play to string
switch (computerInt)
case 0:
System.out.println ("R");
break;
case 1:
System.out.println ("P");
break;
case 2:
System.out.println ("S");
break;
System.out.println ("Enter your play: R, P, or S");//Get player's play from input-- note that this is stored as a string
personPlay = scan.nextLine();
personPlay = personPlay.toUpperCase(); //Make player's play uppercase for ease of comparison
System.out.println ("Computer play is " + computerPlay); //Print computer's play
//See who won. Use nested ifs instead of &&.
if (personPlay.equals(computerPlay))
System.out.println("It's a tie!");
else
if (personPlay.equals("R"))
if (computerPlay.equals("S"))
System.out.println("Rock crushes scissors. You win!!");
if (computerPlay.equals("P"));
System.out.println("Paper covers rock. You lose");
if (personPlay.equals("P"))
if (computerPlay.equals("R"))
System.out.println("Paper covers rock. You win!!");
if (computerPlay.equals("S"))
System.out.println("Scissors cuts paper. You lose");
if (personPlay.equals("S"))
if (computerPlay.equals("R"));
System.out.println("Rock crushes scissors. You lose");
if (computerPlay.equals("P"))
System.out.println("Scissors cuts paper. You win!!");
//... Fill in rest of code
My compiling error is that the string computerPlay was not initialized.. I think I need to do something more in the switch section of the code but can't figure out what. Thanks ahead of time for any advice!soccer89 wrote:
My compiling error is that the string computerPlay was not initialized.. I think I need to do something more in the switch section of the code but can't figure out what. Thanks ahead of time for any advice!Instead of running System.out.println() set the value in your switch statementl then run
System.out.println(computerPlay);after it's properly set.
BTW, rather than a switch statement, you could use
computerPlay = "RPS".substring(computerInt, computerInt + 1);I'll leave you to work out why.
Winston -
Hi folks, I'm experiencing a trouble using forms & reports on two different platforms: Win XP Prof. SP2 for development and SuSe Ent. 9 Linux for deployment.
I've inherited from another person an application with some forms, some reports and two libraries (one attached to the forms annd the other attacched to the reports).
I've modified a function in the library attacched to the reports. It compiles ok on XP.
Moved the library (.pll file) to Suse I tried to compile with:
#!/bin/sh
PATH_SAVE=$PWD
ORACLE_HOME=/opt/oracle/app/oracle/product/frs10.1.2
export ORACLE_HOME
FORMS_PATH=/opt/csa/sw/webapp/FORMS:/opt/csa/sw/webapp/CSA_LIBS
export FORMS_PATH
REPORTS_PATH=/opt/csa/sw/webapp/REPORTS:/opt/csa/sw/webapp/CSA_LIBS
export REPORTS_PATH
TNS_ADMIN=$ORACLE_HOME/network/admin
export TNS_ADMIN
TWO_TASK=csa_v30/csa_v30@csa5i009
export TWO_TASK
ORACLE_SID=csa5i009
export ORACLE_SID
LD_LIBRARY_PATH=$ORACLE_HOME/jdk/jre/lib/i386/server:$ORACLE_HOME/jdk/jre/lib/i386/native_threads:$ORACLE_HOME/jdk/jre/lib/i386:$ORACLE_HOME/lib
export LD_LIBRARY_PATH
ORACLE_TERM=vt220
export ORACLE_TERM
# COMPILE LIBRARIES
cd /opt/csa/sw/webapp/CSA_LIBS
$ORACLE_HOME/bin/frmcmp_batch module=LIB_CSA_FORMS.pll userid=csa_v30/csa_v30@csa5i009 module_type=LIBRARY compile_all=YES logon=YES batch=YES
# COMPILE FORMS and MENUS
cd /opt/csa/sw/webapp/FORMS
for file in *.fmb
do
$ORACLE_HOME/bin/frmcmp_batch module=$file userid=csa_v30/csa_v30@csa5i009 module_type=FORM compile_all=YES logon=YES batch=YES
done
for file in *.mmb
do
$ORACLE_HOME/bin/frmcmp_batch module=$file userid=csa_v30/csa_v30@csa5i009 module_type=MENU compile_all=YES logon=YES batch=YES
done
cd $PATH_SAVE
unset PATH_SAVE
and obtained:
PL/SQL ERROR 201 at line 58, coloumn 5
identifier 'SRW.SET_FOREGROUND_FILL COLOR' must be declared
FRM-30312: Failed to compile the library
Some useful data:
Forms [32 Bit] Version 10.1.2.0.2 (Production)
Oracle Toolkit Version 10.1.2.0.2 (Production)
PL/SQL Version 10.1.0.4.2 (Production)
Oracle Procedure Builder V10.1.2.0.2 - Production
PL/SQL Editor (c) WinMain Software (www.winmain.com), v1.0 (Production)
Oracle Query Builder 10.1.2.0.2 - Production
Oracle Virtual Graphics System Version 10.1.2.0.2 (Production)
Oracle Tools GUI Utilities Version 10.1.2.0.2 (Production)
Oracle Multimedia Version 10.1.2.0.2 (Production)
Oracle Tools Integration Version 10.1.2.0.2 (Production)
Oracle Tools Common Area Version 10.1.2.0.2
Oracle CORE 10.1.0.4.0 Production
And:
Report Builder 10.1.2.0.2
ORACLE Server Release 10.1.0.4.2
Oracle Procedure Builder 10.1.2.0.2
Oracle ORACLE PL/SQL V10.1.0.4.2 - Production
Oracle CORE 10.1.0.4.0 Production
Oracle Tools Integration Services 10.1.2.0.2
Oracle Tools Common Area 10.1.2.0.2
Oracle Toolkit 2 for Windows 32-bit platforms 10.1.2.0.2
Resource Object Store 10.1.2.0.2
Oracle Help 10.1.2.0.2
Oracle Sqlmgr 10.1.2.0.2
Oracle Query Builder 10.1.2.0.2 - Production
PL/SQL Editor (c) WinMain Software (www.winmain.com), v1.0 (Production)
Oracle ZRC 10.1.2.0.2
Oracle XML Developers Kit 10.1.0.4.2 - Production
Oracle Virtual Graphics System 10.1.2.0.2
Oracle Image 10.1.2.0.2
Oracle Multimedia Widget 10.1.2.0.2
Oracle Tools GUI Utilities 10.1.2.0.2
Any advice will be welcome
Thanx
RobThis package currently compiles fine with the latest gcc (at least last time I checked), but still I'm having trouble making a package for it because I don't know how to get it to install to a custom location like the $startdir/pkg directory.
-
I'm having a problem compiling this version (trying to build a driver with a change.)
Here's the error I get:
fbmmx.c: In function 'negate':
fbmmx.c:107: error: incompatible type for argument 1 of '__builtin_ia32_pxor'
fbmmx.c:107: error: incompatible type for argument 2 of '__builtin_ia32_pxor'
fbmmx.c: In function 'expand_alpha':
fbmmx.c:166: error: incompatible type for argument 1 of '__builtin_ia32_por'
fbmmx.c:166: error: incompatible type for argument 2 of '__builtin_ia32_por'
fbmmx.c:166: error: incompatible types in assignment
fbmmx.c:168: error: incompatible type for argument 1 of '__builtin_ia32_por'
fbmmx.c:168: error: incompatible type for argument 2 of '__builtin_ia32_por'
fbmmx.c:168: error: incompatible types in assignment
I'm building with this gcc and Arch 0.7.1
L% gcc --version
gcc (GCC) 4.0.3 20051222 (prerelease)
Copyright (C) 2005 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
Any ideas?
Thanks.Well, it's worth a note that some proprietary display drivers don't like composite and render. The nVidia ones seem to be working pretty well, but ATI always gave trouble with these things. I'm not using composite currently but I did in the past with no problems on nVidia hardware.
Maybe the above should be stated as "issues with xorg7 tend to be caused by unstable drivers and bad configs." -
Trouble compiling PHP extension w/ threaded PHP 5.2.4
Hello,
I'm having some trouble installing the Berkeley DB XML PHP extension on Debian Sarge 3.1.
First, I installed Berkeley DB XML 2.3.10 using the buildall.sh script into /usr/local/dbxml-2.3.10/.
Then, I downloaded PHP 5.2.4 source code, compiled it using pthreads (configure --enable-maintainer-zts) and installed it in /usr/local/php-5.2.4/.
I've built the db4.so extension and it seems to work (verified by running the example simple_counter.php script and seeing that the counter is incremented).
However, building the Berkeley DB XML extension fails with the following error:
/home/dbxml-2.3.10/dbxml/src/php/php_dbxml_eventreadertowriter.cpp: In function `void zim_XmlEventReaderToWriter_XmlEventReaderToWriter(int, zval*, zval**, zval*, int, void***)':
/home/dbxml-2.3.10/dbxml/src/php/php_dbxml_eventreadertowriter.cpp:27: error: parse error before `*' token
/home/dbxml-2.3.10/dbxml/src/php/php_dbxml_eventreadertowriter.cpp:27: error: `reader' declared as reference but not initialized
/home/dbxml-2.3.10/dbxml/src/php/php_dbxml_eventreadertowriter.cpp:29: error: parse error before `*' token
/home/dbxml-2.3.10/dbxml/src/php/php_dbxml_eventreadertowriter.cpp:29: error: `writer' declared as reference but not initialized
It's solved by changing TSRMLS_DC to TSRMLS_CC in these two lines:
26 XmlEventReader &reader =
27 php_dbxml_get_XmlEventReader_object_pointer(rval TSRMLS_CC);
28 XmlEventWriter &writer =
29 php_dbxml_get_XmlEventWriter_object_pointer(wval TSRMLS_CC);
However, there are still errors:
/usr/local/php-5.2.4/include/php/Zend/zend_exceptions.h: In function `void php_dbxml_init_exceptions()':
/usr/local/php-5.2.4/include/php/Zend/zend_exceptions.h:33: error: too few arguments to function `zend_class_entry* zend_exception_get_default(void***)'
/home/loumz/xspc2/dbxml-2.3.10/dbxml/src/php/php_dbxml_exception.cpp:25: error: at this point in file
/home/loumz/xspc2/dbxml-2.3.10/dbxml/src/php/php_dbxml_exception.cpp:25: error: `tsrm_ls' undeclared (first use this function)
/home/loumz/xspc2/dbxml-2.3.10/dbxml/src/php/php_dbxml_exception.cpp:25: error: (Each undeclared identifier is reported only once for each function it appears in.)
This is because maybe zend_exception_get_default needs the tsrm_ls (what is this anyway? some sort of thread-local storage pointer?)
OK, but inside the php_dbxml_init_exceptions() there is no pointer so it is fixed with a fetch (also there is another one like that on line 51):
22 void php_dbxml_init_exceptions()
23 {
24 zend_class_entry ce;
25 TSRMLS_FETCH();
26 PHP_DBXML_REGISTER_CLASS_WITH_PARENT(XmlException, zend_exception_get_default(TSRMLS_C), php_dbxml_XmlException_dtor);
49 zval *xml_ex;
50 TSRMLS_FETCH();
51 MAKE_STD_ZVAL(xml_ex);
In php_dbxml_document.cpp there is also use of TSRMLS_DC inside code that leads to errors (Looking at the macro definition I think this is for declarations right?) so we change it.
80 XmlEventWriter &writer = php_dbxml_get_XmlEventWriter_object_pointer(zv TSRMLS_CC);
103 XmlEventReader &reader = php_dbxml_get_XmlEventReader_object_pointer(zstr TSRMLS_CC);
And finally it compiled and worked (judging by the examples anyway).
Please tell me if I did something wrong along the way. Is it better to compile PHP without ZTS and compile BDB XML without pthreads to avoid this mess?It seems like that was not the end of the troubles. When executing examples/10.php php crashes with a relocation error saying that it can't find php_db4_getDbEnvFromObj (which should be in the db4.so php module).
OK, so I grab the g++ linking command that the libtool invocation spits out and add the installed db4.so to the object files and the extension diretory to rpath (I don't know if I can use the config.m4 because the db4.so has no lib prefix i.e. libdb4.so). Now ldd reports that it's linking correctly to the installed db4.so so I try again. The same relocation error pops up.
When I checked, it seems like db4.so has C++ mangled symbol of php_db4_getDbEnvFromObj(_zval_struct*, void***), but not the C form, and dbxml.so is expecting the C form because it includes php_db4.h inside extern "C".
This is probably because while the header php_db4.h is included within extern "C" {} within the db4.cpp impl file, the prototypes don't match (there is one additional param in the impl) between the ones in the header and the ones in the .cpp file because of the threading additions...
Why do I get the feeling the compilation w/ threaded PHP has not been tested at all :-(. I give up, I'm compiling a nonthreaded version of PHP instead. For my use, this shouldn't matter anyway, but it would be nice if it was possible (or at least say it's not quite tested in the README file). -
Geany Trouble: Compiling Perl Scripts (and general Perl questions)
I'm brand new to Perl because I hear it's one of the best and so far I've found that it is. I used to program a little C++ here and there and a while ago taught myself python but I'd have to say Perl is better than both of them. At any rate, that's neither here nor there. I use Geany and love it, so I didn't see a reason to switch to something new for Perl. Unfortunately I'm having some trouble with compiling. Geany flat out refuses to. I looked around and didn't find anything on here or in the wiki or on the Ubuntu forums other than one person who said to replace the compile command with the execute command.
So, do I even need to compile my Perl scripts or is there something else I'm missing?
On a somewhat related note, the same user on the Ubuntu forums said that at the top of the code there should be:
#!/usr/bin/perl -w
I'm curious if I need the "-w" or what it even does since as of right now I have
#!/usr/bin/perl
and executing the program poses no problems.
Any help is greatly appreciated,
--WesWell, for one, perl is not a compiled language. You can if you want to, but it gains you few benefits. Google for "perl compiler" if you really must.
As for the second, do you know how the shebang line works in unix, and do you know what the -w option does for perl? The answer should reveal itself to you.
Make sure you "use strict;", it will catch many errors. -
I am trying to compile abiword-2.2.7 on Solaris, and am running into a lot of problems. Posted here is where make (gmake, actually) is failing. If anyone can suggest what the problem is, I would be grateful.
-I'../../../../src/af/xap/unix' -I /opt/csw/include -I /usr/include -Wall -pedantic -ansi -D_BSD_SOURCE -pipe -D__EXTENSIONS__ -DSCANDIR_MISSING -DSunOS -DNDEBUG -I/opt/csw/include/libxml2 -I/opt/csw/include/fribidi -I/export/home/nagesh/abiword-2.2.7/wv -I/opt/csw/include -I/opt/csw/include/freetype2 -I/opt/csw/include/libpng12 -DHAVE_THREADS=1 -mt -I/opt/csw/include/glib-2.0 -I/opt/csw/lib/glib-2.0/include -DABISIZEOF_LONG_INT=4 -I/opt/csw/include/gtk-2.0 -I/opt/csw/lib/gtk-2.0/include -I/opt/csw/include/atk-1.0 -I/opt/csw/include/pango-1.0 -I/opt/csw/include -I/opt/csw/include/freetype2 -I/usr/openwin/include -I/opt/csw/include/glib-2.0 -I/opt/csw/lib/glib-2.0/include -I/opt/csw/include/libglade-2.0 -I/opt/csw/include/libxml2 -I/opt/csw/include/glib-2.0 -I/opt/csw/lib/glib-2.0/include -DSUPPORTS_UT_IDLE=1 -MT ttftool.o -MD -MP -MF ".deps/ttftool.Tpo" -c -o ttftool.o ttftool.c; \
then mv -f ".deps/ttftool.Tpo" ".deps/ttftool.Po"; else rm -f ".deps/ttftool.Tpo"; exit 1; fi
cc1: error: invalid option `t'
gmake[4]: *** [ttftool.o] Error 1
gmake[4]: Leaving directory `/export/home/nagesh/abiword-2.2.7/abi/src/tools/ttftool/unix'
gmake[3]: *** [all-recursive] Error 1
gmake[3]: Leaving directory `/export/home/nagesh/abiword-2.2.7/abi/src/tools/ttftool'
gmake[2]: *** [all-recursive] Error 1
gmake[2]: Leaving directory `/export/home/nagesh/abiword-2.2.7/abi/src/tools'
gmake[1]: *** [all-recursive] Error 1
gmake[1]: Leaving directory `/export/home/nagesh/abiword-2.2.7/abi/src'
gmake: *** [all-recursive] Error 1
Also posted is the output from config.log, where there seem to be errors.
I used configure with the options shown below
./configure with-libpng with-libiconv CC=gcc CPPFLAGS=' -I /opt/csw/include -I /usr/include' && gmake
configure:2310: g++ -c -g -O2 -I /opt/csw/include -I /usr/include conftest.cc >&5
conftest.cc: In function `int main()':
conftest.cc:15: error: `exit' undeclared (first use this function)
conftest.cc:15: error: (Each undeclared identifier is reported only once for each function it appears in.)
configure:2316: $? = 1
configure: failed program was:
| /* confdefs.h. */
|
| #define PACKAGE_NAME "AbiSuite"
| #define PACKAGE_TARNAME "abisuite"
| #define PACKAGE_VERSION "2.2"
| #define PACKAGE_STRING "AbiSuite 2.2"
| #define PACKAGE_BUGREPORT "http://www.abisource.com/"
| #define PACKAGE "AbiSuite-2.2"
| #define VERSION "2.2.7"
| /* end confdefs.h. */
| int
| main ()
| {
| exit (42);
| ;
| return 0;
| }
configure:2265: g++ -c -g -O2 -I /opt/csw/include -I /usr/include conftest.cc >&5
Another place where it seems to have a problem is
configure:3111: gcc -c -g -O2 -I /opt/csw/include -I /usr/include conftest.c >&5
conftest.c:2: error: parse error before "me"
configure:3117: $? = 1
configure: failed program was:
| #ifndef __cplusplus
| choke me
| #endif
Any suggestions would be appreciated.
Regards,
MaidrosXentac wrote:pacman -R gtk-smooth-engine
[root@deimas mind]# pacman -R gtk-smooth-engine
error: could not find gtk-smooth-engine in database
M.
Maybe you are looking for
-
How to change the FONT size in mail
Hi, i have one scenario like have generated the one inbound F.M when ever that IDOC is fail i need to send the mail in that i need to change the Headings as bold please smuggest me. Thanks, Hari.
-
Saving WebI report with links to desktop in pdf format
I have a user who is asking if a WebI report with drill down links can be saved to his desktop as a pdf and still have the links work. Has anyone had the same request?
-
Accessing Grouping Collection newCollection variable
Upon looking at my grouping collection, I noticed a new little property called newCollection, however, its icon is a red square in the variable watcher indicating that its a private property. I need to get read access to this property since it has ni
-
HT1386 how do I sync manually, with new update it doesn't show option?
How do I sync manually, with new update it doesn't show the option?
-
Photoshop CS5 jpegs being resampled on import to another program?
I just installed Photoshop CS5 yesterday. If I save an image as a jpeg at, say, 300 dpi, when I import it into CorelDraw the image is being resampled to 72 dpi, so instead of, say, the correct 5x7" image @ 300dpi importing I get a 20x30" image @ 72d