Trouble connecting 1 of 3 macs to my airport extreme thumb drive!

I'm not good at using the terminal so I leave it alone. The other 2 macs in the house can hook up to my thumb drive hooked up to my airport extreme. This Imac won't and I get an error saying that" the text entered does not appear to be a recognized URL formant". I am using the correct address afp://10.0.1.1 . I get a message that my mac does not recognize the url and that they normally start with the prefex afp (which mine does). 2 other macs in the house pick it up perfectly.I ran repair permissions and it said that the following errors could not be fixed
Warning: SUID file "System/Library/Filesystems/AppleShare/afpLoad" has been modified and will not be repaired.
Warning: SUID file "System/Library/PrivateFrameworks/DiskManagement.framework/Versions/A/Resources /DiskManagementTool" has been modified and will not be repaired.
Warning: SUID file "usr/sbin/pppd" has been modified and will not be repaired.
Warning: SUID file "usr/sbin/vpnd" has been modified and will not be repaired.
I think I'm on to something but I don't know how to repair these files, especially the first one. Any Ideas?

Hi Shadow99999
Did you ever resolve your issues with disconnection between your Mac Pro and Airport Extreme? I am having a similar issue.
I have had the extreme for about 4 months and I loose access to the internet about once a month. When I try to troubleshoot the Airport Extreme it is usually inaccessible from my Mac Pro which is my wired access point. The Airport Utility times out with a network error number that unfortunately I did not write down. The light is still green but nothing seems to be working. The first time I tried plugging and unplugging ethernet wires and accessing wirelessly through a Macbook but now I just unplug the Airport Extreme and replug (a Microsoft solution with no problem resolution.) Today I had some unusual internet traffic on my DSL modem and I wanted to look at the Airport Extreme but again I was unable to get to the Airport Extreme with the Airport Utility on my MacPro. (Everything up to the latest rev. per software update.)
The lack of access between the Airport Extreme and a wired computer is really frustrating and may drive me back to my trusty five year old Buffalo Airstation. I could at least log in when I suspected there was a problem. Loss of internet access with the Buffalo was down to maybe once every 6 months to year and lock ups to wired access even rarer.
Any other thread that you found to help you resolve your problem?
Message was edited by: Karl Seibert

Similar Messages

  • I am having trouble connecting my Blu ray player to airport extreme

    Hello,
    I am having trouble connecting my magnavox blu ray player (Model #:MBP512OF/F7E) to my Apple Airport Extreme.
    I have tried setting my network security to none, making sure the radio settings were set to 802.11a-802.11b/g. I double and triple checked my security passcode.
    What else can I try?

    I got it! i just took the player downstairs to the network and pluged it in for the update

  • I can not pair my itouch with my mac book pro version 10.6.6 .. it seems that maybe my itouch is having trouble connecting as my mac seems to pair, then waits for my itouch and it never works. please help!!

    can not pair my itouch with my mac book pro version 10.6.6 .. it seems that maybe my itouch is having trouble connecting as my mac seems to pair, then waits for my itouch and it never works. please help!!

    I am not certain this will fix your problem but I suggest you assign the printer a static IP address.
    Using the printer's front panel, select Menu > Network > WLAN > TCP/IP > Boot method, and change it to "static". Provide a static IP address that is on your LAN's subnet.
    For example, if you are using an AirPort Extreme, you might give it an IP address of 10.0.1.100. If you are using a Netgear or Linksys router that defaults to issuing 192.168.x.x addresses, you might give it an address of 192.168.1.100. That way, the printer will always "reside at the same address" on your network. If your router has the ability, you should reserve that address so that the router does not attempt to assign it to another DHCP device.
    Then, go to System Preferences > Print & Scan, and delete your existing printer with the "–" (minus) button. Add it again, using the "+" (plus) button. In the window that appears, select the IP pane, and from the Protocol menu select "Line Printer Daemon (LPD)". In the Address field type the IP address you gave your printer.
    If all goes well the "Pring Using" field will detect the printer at that address and automatically select the appropriate driver. You will see something similar to the following screenshot ("name" can be whatever you decide, and "location" is optional):
    Click Add, then you can close System Preferences.
    There are other possible reasons your printer is "not responding" which could include wireless interference from competing wireless networks, but try this "static IP" method first. It should mitigate the problem.

  • Trouble connection on ONE Mac !?

    I restore (from an other Mac) my iMac G4 few days ago. Almost everything was look fine and work after (some minus trouble connecting the 2 Mac Firewire. Probably some Alias I was using for some Utilities who was unable to work properly)
    This morning Adobe Updater said he had an update for Illustrator CS3 and ask me to quit Firefox 3. I did it, Illustrator is now update but I can't anymore get an internet connection with the iMac.
    Note that *on the same connection*, my iBook connect as usual.(I know I can't connect both in same time. Is always only one Mac connected)
    I check the pref. panel/Network. They have both the same Built-in Ethernet configuration.
    I need some help because I don't know where to look to fix it.

    For a start, type this into the bowser's URL bar...
    17.149.160.49
    If that gets you to apple.com, then try putting these numbers in Network>TCP/IP>DNS Servers for the Interface you're using...
    208.67.222.222
    208.67.220.220
    Then Apply. These are safer/faster than most ISP's DNS numbers, and have been patched against DNS poisoning.
    https://www.opendns.com/homenetwork/start/device/apple-osx-tiger
    Using network locations in Mac OS X ...
    http://docs.info.apple.com/article.html?artnum=106653
    Sometimes having an all OFF Location can help, thanks to Gnarlodious...
    http://gnarlodious.com/Computer/MacOsx/WiFi

  • I'm trying to set up time machine to back up on an external HD connected t my airport extreme, but the disk doesn't show as an option in the time machine selecting a disk, any suggestion anyone? My mac "sees" the airport extreme   ??

    I'm trying to set up time machine to back up on an external HD connected t my airport extreme, but the disk doesn't show as an option in the time machine selecting a disk, any suggestion anyone? My mac "sees" the airport extreme   ??

    The first important thing to consider here is that Apple does not support Time Machine backups to a drive at the USB port on the AirPort Extreme, so that may likely have something to do with your difficulties.
    If you want to continue to try this, the drive must be formatted in Mac OS Extended (Journaled) and you almost always have to use a powered USB hub with a drive at the port of the Extreme...even if the hard drive has its own power supply....because the port on the Extreme is under powered.
    Most users who try this unsupported method have corruption difficulties sooner or later, but we do hear from some users who seem to be able to make it work.
    The bottom line is that there is no support from Apple on this if you have difficulties, so you may want to consider a secondary backup plan for your important data.

  • Help needed connecting Iomega Minimax Ext HDD to Airport Extreme 802.11n

    Would appreciate if someone can help me with the following task. After researching and trying several things, I have not succeed in resolving the issue.
    I want to connect a Iomega MiniMax Ext HDD (for Mac) to my (Airport Extreme 802.11n + Time Capsule) box using the USB port at the back of my Airport Extreme. Then I want to access the Ext HDD wirelessly as a drive on my Macbook (snow leopard OS). I was told this was possible at the Apple Store...but have failed so far.
    Any suggestions so far

    Hello smitra. Welcome to the Apple Discussions!
    The following are the basic steps for sharing an external USB drive attached to either an 802.11n AirPort Extreme Base Station (AEBSn) or a Time Capsule (TC):
    o Plug the hard disk into the USB port on the back of the base station.
    o Open AirPort Utility, located in the Utilities folder in the Applications folder on a Mac, and in Start > All Programs > AirPort on a computer using Windows
    o Select your base station, and then, choose Manual Setup from the Base Station menu.
    o Click Disks in the toolbar, and then, click File Sharing.
    o Choose “With a disk password,” or “With base station password” if you want to secure the shared disk with a password, or choose “With accounts” if you want to secure the disk using accounts. If you choose to use accounts, click Configure Accounts, click the Add "+" button, and then enter a name and password for each user that will access the disk. For simplicity, I would recommend using the "With a disk password" option.
    o Choose “Not allowed,” “Read only,” or “Read and write” to assign guest access to the disk.
    o Select the “Share disks over Ethernet WAN port” checkbox if you want to provide remote access to the disk over the WAN port.
    You should now be able to find this drive within Finder under the SHARED category.

  • We recently switched ISPs. To connect to the new ISP our Airport Extreme has to be in bridge mode. Now our Nintendo Wii won't connect to the Airport. Is it an issue with bridge mode that is causing this?

    We recently switched ISPs. To connect to the new ISP our Airport Extreme has to be in bridge mode. Now our Nintendo Wii won't connect to the Airport. Is it an issue with bridge mode that is causing this? We're running two Macs wirelessly with no problems.  And the Wii did connect before the switch.

    Hello and thanks for the reply.  I gave this a try, turned off Airport on one of the computers and tried the Wii again.  Still no connection.  I should say that we're also running an old G4 (wired) off the Airport as well, with no problems.  I've tried many things to make the Wii to work, including power cycling the Airport, turning off the security settings in the Airport, resetting the Airport to it's default and redoing the network, resetting the network setting on the Wii (several times), moved the Airport closer to the Wii, all with no luck.  The Wii "sees" the Airport but won't connect to it.  I'm at a loss for anything else to try, so any help is appreciated.

  • Connecting samsung surveillance cameras to internet airport extreme 7.7.3

    i have the samsung sds-v4040 and I'm not able to connect to the internet through the airport extreme 7.7.3
    i been trying but I'm not really computer friendly with MAC address or dtp or tcp i seen them but don't know what to do. can some one help me plug the info in the correct places? thank you

    To successfully access an IP camera on the local network from the Internet, the following basics need to be taken care of:
    Install the camera(s) and verify that you can access them from the local network.
    Configure port mapping/forwarding on your router. Typically, IP cameras require at least two ports: 1) A web port for administering the camera; Usually TCP port 80, and 2) A streaming port to broadcast the camera video feed; Usually UDP port 9000. Note: You should check with your camera's documentation for the exact ports required.
    If the camera is attached to a computer, you will need to configure the computer's firewall to open the same ports as in step 2 above.
    Verify that your modem is in bridge mode, i.e., if the modem provides NAT & DHCP services, turn them off.
    Test your network. Use CheckIP to determine your router's current WAN-side (public) IP address. Then, from a remote location (not from a computer on the local network), use the DynDNS Open Port Tool to verify that the required ports are open. Success is an "Open" response from the Tool.
    For basics on configuring port mapping/forwarding on your AirPort, please refer to the following AirPort User Tip.

  • New help with my mac air and airport extreme time capsule dont know how to save to time capsule and use as a external hd

    new help with my mac air and airport extreme time capsule dont know how to save to time capsule and use as a external hd would like 2 store my home videos and pictures on the time machine (ONLY) as the MAC AIR has storage space limited space please help. THANK YOU.

    See the info here about sharing or using the TC for data.
    Q3 http://pondini.org/TM/Time_Capsule.html
    It is extremely important you realise.. the Time Capsule was never designed for this.
    It is a backup target for Time Machine.. that is the software on the computer that does backups.. it has no direct connection to the Time Capsule.
    It has no ability to back itself up.. unlike all other NAS in the market. It is therefore likely one day you will lose all your files unless you seriously work out how to backup.
    The TC is slow to spin up the hard disk and fast to spin down. iTunes and iPhoto will continually lose connection to their respective libraries.
    iPhoto in particular is easy to corrupt when you move photos over wireless into the library.. once corrupted all is corrupt. A single photo will ruin it all.. so backup is utterly essential.
    Time Machine cannot do backups of network drives. ie the TC. You will need a different backup software like CCC. You will then need another target to backup to..

  • How to connect my iPad, Brother printer, and AirPort Extreme?

    How to connect my iPad, Brother printer, and AirPort Extreme?

    I don't believe any of the Brother printers are AirPrint-enabled. Is your Brother printer network-ready? That is, does is support either/both a wired or wireless connection or just uses USB to connect?

  • Why can't I no longer connect to the Internet via my AirPort Extreme Base?

    I suddenly can no longer connect to the Internet through my AirPort Extreme. Everything was fine until this morning. My Base Station is connected to a DSL modem and then my computer connects to the Internet wirelessly through the Base Station. The center light is on in the Base Station. The left light flickers telling me there is wireless activity. I can still access my printer through the Base Station. But the right light is no longer flickering. I have rebooted everything several times. Does anyone have insight into this problem. This is the second time this has happened. For over a month I could not access the Internet through the Base Station, and then suddenly and arbitrarily it started working again. This morning it just stopped again.

    I've had the same problem - mine started after I upgraded to 10.4.8 on my MacBook a week or so ago.
    I can see other networks around my home and when I travel, but can only connect via ethernet cable (and my ISP is comcast - I thought the upgrade was supposed to help make connecting with comcast better).
    My G3 has no problem connecting, so I don't think it's exactly a problem with my modem, or base station, or even comcast. I think it has something to do with my base station and upgrading to 10.4.8. Btw, dropping back to 10.4.6 hasn't helped.

  • Is it possible to connect 2 usb devices to an Airport Extreme?

    Is it possible to connect 2 usb devices to an Airport Extreme (either the newest, ac model or the previous model) using a usb hub?

    Apple does not provide a compatibility list for USB connected devices, so no one can tell you whether things will work until you try it out yourself.
    If both the Iomega drive and HP printer work when you connect them individually to the AirPort Extreme, then your chances using a powered hub are quite good....assuming that the USB hub is functioning correctly.
    In other words, make sure that both devices are working when you try them individually connected to the USB port on the AirPort Extreme. If they don't work that way, they won't work with a powered hub either.

  • Troubles with D-Link DIR 600 and AirPort Extreme

    Hi guys
    The question might has already been raised but I couldn't find anything in any other threads helping me.
    I've got a new router (came along with my new ISP) D-Link DIR600 which I tried to connect to my AirPort Extreme to have a secondary WiFi available. My devices are connected in this way:
    Internet Modem ---> AirPort Extreme (cable) ---> D-Link 600 (cable).
                                            |                                   |
                                            |                                   |
                                       WiFi(1)                          WiFi (2)
    While my APE is just working perfect the D-Link doesn't. I can connect to my DLink Router though but the "Internet" somehow won't get passed through.
    Any help
    Thanks a lot

    The dlink probably does not have a bridge mode.. so you have to use WAN bypass.
    See this post for details.
    http://forums.whirlpool.net.au/forum-replies.cfm?t=933517
    Or flash your DIR600 over to dd-wrt so you can use it in WAP mode.

  • Can I connect my Linksys WRT160N V3 with Airport Extreme via ethernet cable?

    I have a Linksys WRT160N V3 router (Living Room) to my cable modem but the wifi does not reach certain spots in the house where its necessary.  If I buy a Airport Extreme and place it in my bedroom and connect it with an ethernet cable that I have connected with my iMac will the airport extreme work as a wifi extender since wifi does not reach my room?

    Yes, the AE can be simply put in bridge mode so it will become an AP and set the wireless to create a wireless network.. you can then use same name and same security as linksys.. this is called roaming network.
    http://support.apple.com/kb/ht4260
    Although the apple instructions have two apple routers, any two wireless routers will work the same way.

  • Set up a Windows formatted Drive as an Airport Extreme USB drive

    I have a USB hard drive that was formatted as a Windows NTFS drive.  The drive does not have data that I want to keep.  I assume I have to format it as a MAC drive to use it as a Airport Extreme USB drive.  What is the best way to set it up?  Should I format it with the drive attached to my Macbook Pro or can it be formatted attached to the Airport?  Are there any things I should be aware of in attaching this drive to the Airport?
    Although I don't think it matters, this drive is a Vantec Nexstar MX400 enclosure with two 3TB hard drives configured as a 3 TB RAID 1.  If anyone has additional information I should know about working with an MX400 RAID 1 drive in formatting it for a Mac it would be appreciated.

    You need to format it as Mac OS Extended (Journaled), FAT16, or FAT32 while it's plugged into a computer. exFAT, NTFS, and non-journaled HFS+ won't work.
    You may also need to use an USB hub with its own power supply.
    (111341)

Maybe you are looking for