Trouble connecting audio for mpeg 2 upload

I am new to compressor but not to FCP. Have been searching the forum and reading but not getting it. My client wants me to upload a :60 to his FTP in MPEG-2. I understand that the audio file is separate when creating mpeg-2. How do I connect them and make a file to upload?
Thanks
FCP-5; Compressor 2

Compressor 2.x.x and earlier can only make MPEG-2 Transport Streams, not Program Streams. You need Compressor 3 or later to be able to make Program Streams using Compressor. But with a little help of a great application called MPEG Streamclip, you can easily make MPEG-2 Program Streams.
Encode your video and audio using Compressor. For audio, choose AIFF, and make sure it gets the same name as the .m2v, but of course with the right .aif suffix.
Open the .m2v file in MPEG Streamclip (the audio should automaticly load with the video file if they have the same file name). Choose the file menu and choose Covnvert To MPEG or Covnvert To MPEG Using MP2 Audio, depending on what your client wants. Ask them.
Keep in mind that when opening the .mpeg with PCM audio in QuickTime Player, you can not hear any audio. To check if the PCM audio really was included, open the .mpeg file in MPEG Streamclip and listen there. The .mpeg file with MP2 audio should play the audio in both QuickTime Player and MPEG Streamclip.
Good luck!

Similar Messages

Little green phone icon/trouble connecting audio chat

Hi,
I'm trying to get audio going with my mom and her 15" iBook. She's 10.3.9.
We're both using Comcast. Speed check on mine say 2.5 megabits, and hers says 3.1.
Anyway, we just can't seem to connect. I notice that her "little green phone icon" next to her name is... I guess... "flat". Mine and (another buddy) look like they're "layered", and I don't have any trouble AV chatting with him, even when I was in China.
After the audio chat fails with Mom, her green phone icon gets grey.
I've done alot of looking, and spent some time looking at Ralph John's site too. But I can't seem to find any direction. I have not stopped by Mom's house to try to figure it out- I should go visit her anyway!
Anyone have any thoughts (or direction)?
Thanks,
Guy

Hi Ralph and EZ Jim,
Thanks for your responses guy's.
I finally got over there to look at it. After reading a post this morning that had me unplug her modem for at least a half hour - up to 12 hours, I got her AX going. (Her wireless was my other issue...)
That let me get both of us a connection. I checked her settings although I'm not 100% what they should be. I was able to sit there and show her what buttons to click.
My point is, I think I got it resolved. Maybe it was just that her modem was a problem and the AX took care of it, or maybe it was something else I did. In the end, I wasn't getting her audio through my speakers (i got my iSight as my audio out, and her side was fine)...
This is a different quest, and I'll do some research before I ask, but... I never actually got to chat with her because I've set up my Bluetooth headset to work on my machine, and iChat couldn't find it, cause I left it at home!
Thanks again for your help, and I'll definitely be back when I have other issues (or answers) with iChat.
Guy

G15- trouble connecting camera to computer to upload photos.

I am suddently unable to connect my G15 to my computer to upload photos. I've tried a new cord but still, nothing is happening. Any suggestions?
E

You might need to reload the driver file for the camera. What computer operating system are you using? Windows 7, or maybe a Mac? Would need to know more about the computer to give good advice.
Steve M.

Need help, No audio for mpeg on Quicktime

Ok, the other day i downloaded a third party movie player that played movies that quicktime wouldnt play. It was MplayerOSXB8r5 and it worked ok. When i tried to play my regular mpegs that worked fine with quicktime i got no audio. the avi files work just fine, its only my mpeg movies that wont play with audio.
So i trashed the Mplayer hoping the problem would be fixed & nothing. I downloaded quicktime pro & nothing. I need help in fixing this problem.
any suggestions

Flip replies:
We have recently become aware of an audio compatibility issue revolving around Flip Video and the latest QuickTime 7.4.5 update running on the Mac OS X 10.4 Tiger operating system. Apple is aware of the issue and is investigating it with Flip Video.
This issue does not affect customers running the Mac OS X 10.5 Leopard operating system.
Several customers have reported that they have had success using the QuickTime components available from Perian (http://perian.org). Please note that we cannot officially recommend this as we have not fully tested the application, nor do we have knowledge of what other applications may be affected.
We apologize for any inconvenience this may have caused. Please do not hesitate to contact us for further assistance.
Thank you,
PS: Perian does me no good. A friend with 10.5 says he has no problem, just as indicated above.

Lossless audio for MPEG-2 and MP4

When I export a video out to either MPEG-2 or MP4 (H.264) I am not able to select an option for lossless audio. Is there a way to add that option?
Thanks,
Mark

How do you plan to use the file? Which lossless codec do you wish to use? Is lossless audio appropriate for how the file will be distributed? Are you looking for best quality or is there a different, specific reason that you wish to use lossless encoding? (Also, what version of Adobe Media Encoder are you using?)
The list of available codecs for the MPEG formats can change depending on the Multiplexing setting you choose. However, make sure that the multiplexing setting you choose is appropriate to how you intend to distribute the file. For example, 3GPP multiplexing creates a file optimized for delivery to mobile devices. And note that the None multiplexing option creates separate audio and video files.
Adobe Media Encoder only offers multiplexed AAC encoding for MPEG4 and H.264 files. Although not lossless, the quality of AAC can be very high and is the general standard for the MPEG4 container format. Lossless encoding is not common for the MPEG4 container format, though it is legal per the MPEG4 Part 14 specifications. Again, you should match your export settings to the intended use of the video file.
-=TimK
-=Adobe After Effects and Adobe Media Encoder QE

Trouble with audio for ipod movies

Hey
I recently converted a few videos to my ipod where they all successfully went on. However, when I play them the audio does not appear to be there and you cannot hear anything. Eventhough the volume is at its highest and listening to music s perfect.
Can anyone help me with this?
Thanx

iTunes and Quicktime (and Quicktime Pro, as well) don't convert multiplexed video files well for iPods; it ends up that the video files don't play sound in the file on an iPod.
(iTunes saves the audio and video parts of the file on the same track, as opposed to a different parts of the video file; this doesn't work for iPods when they plays videos coverted in this way)
In this case, you'll need to try using a third-party program in order to properly convert the videos for your iPod.
Try MPEG Sreamclip for a good converting program (it's compatible for both Mac and Windows, by the way).
Be sure to convert it to a MPEG-4 file type, of course, and the audio should work out okay.
-Kylene

Still having trouble with audio on Macbook Pro

I had posted a discussion board earlier on this issue. I've been having trouble with audio for certain videos on youtube and basically any website embedded with a video. The audio works for a few seconds that doesn't or it doesn't work at all. My volume is up, not on mute, and the one on the video isn't on mute either. It's funny because I just tried watching a video on Firefox (as opposed to Safari) and it works. Could it possible be something with the settings for safari?

Try restarting your Mac, resetting your router, and resetting your modem. My cable internet has gotten slow at times as well, and when I reset my router everything cleared up.

I want to get another 4s and use it not as a phone, but only as a video camera and editor and hook it up only with wifi. i would sync it to itunes so i can pay for apps and upload. would this work, or must it be connected to a phone carrier?

I want to get another 4s and use it not as a phone, but only as a video camera and editor and hook it up only to wifi. i would sync it to itunes so i can pay for apps and upload. would this work, or must it be connected to a phone carrier?

Trust me when I say this coming from 20 years of experience.
Get a powered external drive, format it 1 Partition Option: GUID and OS X Extended Journed as the format in Disk Utility.
Download and install Carbon Copy Cloner, clone internal drive to external drive.
Set a schedule to remind you to do it at least once a week, keep it near your charger.
When you plug your charger in, do plug the clone and power the machine up, set the display to sleep only,
CCC will do the rest.
If you want to boot from it, hold the option/alt and select it Startup Manager.
I've seen many TimeMachine and TimeCapsule nightmares and so far haven't seen a problem from anyone using a bootable clone.
It's simple, it's easy, it's more reliable and more powerful than what Apple does and it only takes plugging in a extra cable.
Make as many clones as you want, keep them time seperated, off site etc. etc.
Cables don't have network issues, clones can be verified in seconds merely by booting from them.
Clones protect your productivity, your up in seconds on a clone despite even the hard drive dying.
Software problem? No sweat, boot of the clone and reverse clone your problems away.
If you want to fuss and muss with half implemented TimeMachine and TimeCapsule network headaches then prepare to suffer.
I don't like to suffer, I bought a Mac not to suffer, but it appears you do with TimeMachine and TimeCapsule.
Most commonly used backup methods

I am having trouble connecting to my in-home internet via wireless router. It says it is connected, but when I try to open email, no connection is found. This also occurs for Safari and Facebook. I am connected by Charter Cable.

I am having trouble connecting to my in-home internet via my wireless router. The IPad says I'm connected to the router, but I am unable to receive email, Facebook and Safari. I run through Charter Cable. This only occurs on my IPad. My desktop works fine.

Although it may ultimately be necessary to perform a Factory Default Reset on the AirPort Extreme and start over with a new configution, we can first try to see if things will work with the existing settings on the device.
Push the reset button (if present) on the cable modem
Power off the modem by pulling the power cable
Remove the internal battery from the modem (if easily accessible)
Power off the AirPort Extreme and every other device on the network....order is not important
Wait at least 20 minutes....longer is better
Re-install the battery in the modem if it was removed previously
Make sure that the Ethernet cable from the modem is connected to the WAN port (circle of dots icon) on the AirPort Extreme
Power up the modem and let it run 4-5 minutes buy itself
Power up the AirPort Extreme and let it run 4-5 minutes
Then power up each other network device one at a time about a minute apart
Check for a good Internet connection on the network with all devices
If still no luck, you will need to perfom a Factory Default Reset on the AirPort Extreme as follows:
Pull the power plug from the back of the AirPort Extreme
Hold in the reset button and keep holding it another 8-10 seconds while you simultaneously plug the power back in to the AirPort Extreme
Release the reset button and allow 25-30 seconds for the AirPort Extreme to restart to a slow, blinking amber light
Then open AirPort Utility end reconfigure the AirPort Express again.

I am trying to activate LR6 on a laptop that will not be connected to the internet. I have clicked on the link for offline activation, but it says to follow the instructions till it says "having trouble connecting to the internet". I never get there. H

I am trying to activate LR6 on a laptop that will not be connected to the internet. I have clicked on the link for offline activation, but it says to follow the instructions till it says "having trouble connecting to the internet". I never get there. How do I get it to generate the code that I can take to an internet enabled device so I can validate it?

http://portableapps.com/apps/internet/firefox_portable/localization#legacy36

I am having trouble connecting to my wireless internet. I keep getting message that my network configuration settings have changed. Ive been advised that i need to change settings to look for dynamic ip address ?

I am having trouble connecting to my wireless internet and am getting the message that my network configuration settings have changed. I have reported it to my provider who advised that they think the Mac is looking for a fixed IP address and they use dynamic addresses. I have had the Mac for months and have not had this problem before. I would appreciate any help please on how to fix this ?

Then I get a separate pop up that says: Secure Connection Failed. aus3.mozilla:443 uses an invalid security certificate.
The certificate is only valid for the following names: securelogin.arubanetworks.com, www.securelogin.arubanetworks.com
(Error code: ssl_error_cert_domain)
This could be a problem with the server's configuration or it could be someone trying to impersonate the server.
If you have connected to this server successfully in the past the error may be temporary and you can try again later.
I have tried many many times!

I have been having trouble connecting to my wifi on my ipad mini but my iPod is just fine......it will connect and then say "Unable to connect to network" I've tried resetting my ipad mini and turning off my router for 30 seconds and its not working.

I have been having trouble connecting to my wifi on my ipad mini but my iPod is just fine......it will connect and then say "Unable to connect to network" I've tried resetting my ipad mini and turning off my router for 30 seconds and its not working.

What TC do you have? Model number direct from the base is a big help, it will be A1 followed by 3 numbers.. eg
A1409 Gen 4.. The new AC is A1470
How is it setup?
I need the whole network setup. what modem/router, how is the TC connected etc??
I also need to know what IP the ipod gets, so I can see what mode the TC or network router is working in.

My apple TV is connected to a DTV with an HDMI cable and to my Yamaha receiver via optic cable. We rented a movie on Apple TV and.found that the movie played, but we only got audio for music tracks. Voice tracks were silent using both TV and receiver.

My apple TV is connected to a DTV with an HDMI cable and to my Yamaha receiver via optic cable. We rented a movie on Apple TV and.found that the movie played, but we only got audio for music tracks. Voice tracks were silent using both TV and receiver. This only occurred on the rented video and on recorded shows on my cable DVR. previews and other content on Apple TV are fine. Any ideas??

Previews and trailers do not contain 5.1 audio.
If you have recently moved your setup, you may have inadvertently changed some of the settings on your receiver. It certainly sounds as though it is unable to play the 5.1 audio from the Apple TV.

I can not pair my itouch with my mac book pro version 10.6.6 .. it seems that maybe my itouch is having trouble connecting as my mac seems to pair, then waits for my itouch and it never works. please help!!

can not pair my itouch with my mac book pro version 10.6.6 .. it seems that maybe my itouch is having trouble connecting as my mac seems to pair, then waits for my itouch and it never works. please help!!

I am not certain this will fix your problem but I suggest you assign the printer a static IP address.
Using the printer's front panel, select Menu > Network > WLAN > TCP/IP > Boot method, and change it to "static". Provide a static IP address that is on your LAN's subnet.
For example, if you are using an AirPort Extreme, you might give it an IP address of 10.0.1.100. If you are using a Netgear or Linksys router that defaults to issuing 192.168.x.x addresses, you might give it an address of 192.168.1.100. That way, the printer will always "reside at the same address" on your network. If your router has the ability, you should reserve that address so that the router does not attempt to assign it to another DHCP device.
Then, go to System Preferences > Print & Scan, and delete your existing printer with the "–" (minus) button. Add it again, using the "+" (plus) button. In the window that appears, select the IP pane, and from the Protocol menu select "Line Printer Daemon (LPD)". In the Address field type the IP address you gave your printer.
If all goes well the "Pring Using" field will detect the printer at that address and automatically select the appropriate driver. You will see something similar to the following screenshot ("name" can be whatever you decide, and "location" is optional):
Click Add, then you can close System Preferences.
There are other possible reasons your printer is "not responding" which could include wireless interference from competing wireless networks, but try this "static IP" method first. It should mitigate the problem.

Does anyone have trouble connecting to their wireless network, after being logged on for some time? Mountain Lion.

I am having trouble connecting to my wireless network. It works when I startup my computer but, after a while it can't seem to find the wireless network. I have an Airport Extreme and the light is green. The only way to remedy this problem is to restart my computer. Mountain Lion isn't that great after all not to mention it distorts some images when scrolling. I am kindly asking for some advice, I assume a major update will be coming soon.

You don't by chance have a "invisible" or "hidden" network enabled on the router?
Because Mac's won't reconnect automatically now to hidden network only upon reboots, it's sort of like advertising the hidden network if you take the computer elsewhere.
Also hidden networks are no deterrent to hackers, they see all.
Also check your time and date, make sure they accurate first, then save that, then make sure it's updated via Apple time servers in your general location (System Preferences > Time and Date) If your being kicked off, your DCHP lease might be expiring too early.
WiFi, Internet problems, possible solutions
WiFi security issues, at home and WiFi hotspots

Trouble connecting audio for mpeg 2 upload

Similar Messages

Maybe you are looking for