Trouble connecting to a shared resource upon login

I updated my server/client system this summer and I haven't worked out all the bugs yet.
My wgm server is running Snow Leopard. All student accounts and documents are on the Snow Leopard server. I have another server running Leopard. Some shared resources (program data storage, etc.) are on the Leopard server.
I want a 1st grader to log in (10.4 client) and have it automatically connect to the share point on the Leopard server. I have not duplicated the student accounts on the Leopard server because I don't want to maintain two user databases. If there was a way to get the Leopard server to draw the user database from the Snow Leopard server, I think that would solve my problem.
As it is, because the Leopard server doesn't have an account for that student, the share point isn't connected to upon login. No share point mounted, program won't run.
I'd be happy if there was a way to make the share point mount automatically with a generic login like "mrshare" and a password.
So what do I do? Do I have to shift all my shared resources to the Snow Leopard server and burden it more?
Thanks for your help.

Assuming that your username is "acurotto", have you tried connecting to smb://tako/acurotto?

Similar Messages

  • I have an IPAD 2 that I use to view an IP camera over a Wifi network.  The Ipad is in a vehicle that leaves the Wifi range and then returns to the range.  Upon returning to the range, the Ipad has trouble connecting to the network. (30 seconds)

    I have an Ipad 2 that I use to view an IP camera over a Wifi network.  The Ipad is in a vehicle that leaves the Wifi range and then returns to the range.  Upon returning to the range, the Ipad has trouble connecting to the network. (30 seconds)  The Ipad will eventually connect to the network, but by this time the driver is frustrated.  I have moved the antenna to within 20' of where the vehicle comes to a stop.  My Iphone does not have a problem connecting or reconnecting when used side by side with the Ipad.  Both the Ipad and Iphone have Otter box covers.  Has anyone run into this problem or have any suggestions?

    30 seconds to reconnect to a WiFi network is not unusual, especially in an environment where other radio signals on similar frequencies are present.  Sorry about that.
    You might get better times by letting the WiFi base station pick another channel.  But you might not.

  • File and print sharing resource is online but isn't responding to connection attempts

    hi,
    I'm on windows 8.1 enterprise.  All of a sudden in windows explorter when I try to access drives on my network I get "file and print sharing resource is online but isn't responding to connection attempts"..  This formerly did not have
    any issues.
    I did a restore to a point where I know it did work...but it still does not connect to network drives.
    Please advise,thanks James
    AJ Anning

    Hi,
    I made a search in Cisco support forum and found some thread which had similar problem with yours, the solution of them maybe helpful with your.
    https://supportforums.cisco.com/discussion/11533701/cisco-anyconnect-3008057-certificate-validation-failure
    You can follow the reply of this thread to check Cisco certificate on your system.
    Open Certificate manager: Open Run, Type
    certmgr.msc , Press Enter.
    Roger Lu
    TechNet Community Support

  • Trouble connecting with IMAC to Windows shared files on network.

    Every so often our IMAC will have trouble connecting to our file storage server (running Windows Vista). Usually we reboot the file storage server and this fixes the problem. When the connection problem occurs the IMAC can still smb into other workstations on the network, but not the file storage server. Anyone had any similar issues before? The two things that seem odd to me are 1) That the IMAC can still smb into other workstations on the network and 2) That a restart fixes it everytime.

    Hi and Welcome to Apple Discussions.
    You are not doing anything wrong. There are compatibility issues with the way Pidgin and iChat Leopard communicate. Your options are to use another windows client (PSI for instance) or make some changes to the configuration of the ichat server (namely set the server up to use the non SSL port 5222 and plain text log in).

  • Resource Management of Shared Resource Pool at the Project Level

    I am having difficulty figuring out how to implement our resource management process. Currently we have one "Resource Pool" project that has all the shared resources. It is connected to both a "master portfolio" plan that has some task
    detail in it and other individual project plans that have their own WBS (for larger projects).
    The difficulty arises because we want to do resource allocation at a project level, but the resource usage view shows the WBS/task level detail.  I've tried grouping the resources assignments by resource and then project, but since everything is
    in the "Resource Pool" project, they all group under that project.  I've tried adding the "Project" field and it does show as the source project, but it doesn't group on that field, but rather the "Resource Pool" project
    only.
    How can I see resource allocation/usage at just the project level so our managers can do planning, negotiation, and re-allocation on a periodic basis with one simple view?
    My best current idea is to disconnect all the sub-tasks from the sharer, eliminate the WBS below the project level in the master plan and attach resources at that single line project in that master plan.  Then, we would have to manually alter the "Max"
    available time in the individual sub-plans as we altered allocations.  That essentially disconnects individual plans from both the master plan and the shared resource pool.
    Is there a better way?

    Mark,
    Yeah, I think there is a better way. Having a linked structure the contains both a pool file and a dynamic master is tenuous enough (i.e. prone to corruption), but if you start disconnecting from the pool and and messing with the master, you will most certainly
    invite trouble.
    But here is an approach that might work. I tested it on a sample pool file with two sharer files and I think it might give you what you want.
    1. First, either manually copy or use VBA to copy the contents of the Project field to a custom text field in each sharer file
    2. In the pool file display the Resource Usage view
    3. Create a group that first groups on the Resource Name and then on the Text1 field, and select "group assignments, not resource"
    4. Change the Text1 group field to be "assignment"
    Does that give you what you want?
    To help visualize, here is a screenshot of my test file. After grouping I applied a filter to Text1 with the option to also show summary tasks:
    John

  • How can I have multiple users on iTunes (in order to connect to a shared office iPad)?

    How can I have multiple users on iTunes (in order to connect to a shared office iPad)? Currently each of us has our own iTunes account, so I've made an "all office" Apple ID. However, I can't seem to get two different accounts (my personal and the office) to work on my machine. Even when I login as "the office", my personal library is still showing. Additionally, when I try to setup with a first-time use in iTunes, I get an error that I don't meet the minimum age requirement - no matter what birthdate I enter!

    The library exists regardless of which user is logged in.
    The only way around that is to create different user accounts on the computer.
    There is no way to have 20 unique iTunes users access a shared iTunes under a single login on the computer.

  • I'm trying to connect through the FTP client Filezilla. When I try to login with the wizard, it gives me a "503 Failure of Data Connection" reply; when I attempt to login myself, it gives me a "530 Login Authentication Failed." HELP!!!

    My current softward is: Mac OS X Lion 10.7.5 (11G63)
    When I attempt to use the Filezilla connection wizard I get the following message:
    Connecting to probe.filezilla-project.org
    Response: 220 FZ router and firewall tester ready
    USER FileZilla
    Response: 331 Give any password.
    PASS 3.7.1.1
    Response: 230 logged on.
    Checking for correct external IP address
    Retrieving external IP address from http://ip.filezilla-project.org/ip.php
    Checking for correct external IP address
    IP 27.0.19.56 ch-a-bj-fg
    Response: 200 OK
    PREP 52470
    Response: 200 Using port 52470, data token 1871898076
    PORT 27,0,19,56,204,246
    Response: 200 PORT command successful
    LIST
    Response: 150 opening data connection
    Response: 503 Failure of data connection.
    Server sent unexpected reply.
    Connection closed
    When I attempt to login Host/Username/Password myself I get the following message:
    Status:          Resolving address of amyhoney.com
    Status:          Connecting to 184.168.54.1:21...
    Status:          Connection established, waiting for welcome message...
    Response:          220---------- Welcome to Pure-FTPd [privsep] [TLS] ----------
    Response:          220-You are user number 12 of 500 allowed.
    Response:          220-Local time is now 04:05. Server port: 21.
    Response:          220-This is a private system - No anonymous login
    Response:          220 You will be disconnected after 3 minutes of inactivity.
    Command:          USER 5475****
    Response:          331 User 5475**** OK. Password required
    Command:          PASS ********************
    Response:          530 Login authentication failed
    Error:          Critical error
    Error:          Could not connect to server
    Now before anyone points out the obvious: my username and password are correct. I've already gone through changing them so I know they are.
    Additionally, I've pretty much tried EVERYTHING I've read online, from messing with "terminal" (and subsequently the FTP and STFP options) to changing the sharing options and turning on file sharing/remote management as well as just turning off my Firewall completely.
    Now I've used Filezilla before when I first published my site and everything worked fine. My site is published through Wordpress so most of my editing was done through simply logging into my "wp-login." I recently changed the theme and in order to change the header image in that theme I have to do it through my "wp-content" folder, which means I need to use Filezilla. I feel like a complete moron right now considering I've had my site for about a year and can't even doing something this simple.
    I've read that the newer version of Lion/Mountain Lion don't support automatice FTP anymore, which (as I mentioned prior) I attempted to fix through Terminal. However, nothing I do seem to do works.
    Can someone walk me through fixing this? And I do mean 'walk me through'. I'm not a tech-savvy nerd who knows all the lingo, I just know the basics so sorry if my ignorance offends you.
    HELP!!

    First be sure login and password are OK. Sometimes the address starts wit "http://..." and sometime starts with "ftp://...". Try both normal FTP access and Scure FTP access (SFTP). At the end, contact the site's provider.

  • How many users can connect to a shared drive on a non-server workstation?

    How many users can connect to a shared drive on a non-server workstation? We're waiting for our server to arrive and in the interum we're using a Pegasus 2 R6 attached to an iMac running Mavericks as our fileserver. It's been sketchy, the connection to the server being dropped once in a while or the inability to mount the drive after a week of success. The Pegasus we're using now will be attached to a server once it arrives. For now I need to figure what's coausing trouble before I commit to this being our main storage as planned. The data is backed up every night so I'm not worried, its the usability issues. 5-7 people are mounting this drive and opening/saving at the same time. Is there a limit to Maverick's fileserving ability that may be causing this? Understandable if so.

    The file server in the client version of OS X has a default limit of 10 simultaneous connections. That limit can be raised by installing OS X Server, or lowered by setting a hidden preference. Assuming you've done neither, you may be able to solve the problem temporarily by stopping and restarting file sharing in the Sharing preference pane, or permanently by setting another hidden preference on the server to break idle connections quickly.
    defaults write /Library/Preferences/com.apple.AppleFileServer idleDisconnectOnOff -bool YES
    Stop and restart file sharing. To reverse the change, run this command in the same way:
    defaults write /Library/Preferences/com.apple.AppleFileServer idleDisconnectOnOff -bool NO
    Credit for this solution to ASC member suter:
    this file server will not allow any additional users to log on

  • Screen Sharing and Remote Login suddenly stopped working

    I have had Screen Sharing and Remote Login turned on on my iMac for several weeks and they have been working fine up until now. I have been accessing the computer via VNC programs and command-line ssh logins from other computers on the same local network. When I tried to connect today, i was given the following error message.
    ssh: connect to host xxx.xxx.xxx.xxx port 22: No route to host
    I have all of the required settings turned on in System preferences and there are no firewalls or router settings blocking it. I connected the two computers together via ethernet cable and the error message still occurred.
    I can ssh from the machine to 127.0.0.1, so the ssh server is running. I can ssh to other locations from the laptop i am attempting to connect with, so that's not the problem either. I just spent an hour on the phone with the apple tech support line and they couldn't figure anything out either. Can anybody figure something out?

    have you tried the obvious - restarting the computers involved and the router?

  • Trouble Connecting to Other computers in Network

    Hi. I have quite a few computers in our local home network, via an apple airport extreme. There's three G4's running Tiger, and a few G5's running Leopard. I'm able to connect to any of the 3 Tiger based G4's by opening the network, and selecting "share screen" on which ever computer I want to run. It works fine. However, I cant seem to log into any of the Leopard G5's from the G4 computers. I dont know if it has to do with the fact that, they're Leopard, or that they're G5's. Whenever I got to Network up at the top under the "Go" pane, nothing comes up when you click it. I tried manually connecting with their IP addresses using the "connect to server" function under Go, doesnt work either. None of the Leopard computers appear under the network, only the older computers. Any suggestions on how I can connect the Tiger computers to the newer Leopards? I dont see a share screen function anywhere on Tiger.

    Okay, so you can get from a Leopard to a Leopard and from a Leopard to a Tiger okay then, right? But what you can't do is get from a Tiger to a Tiger or from a Tiger to a Leopard, right? And that's what you are inquiring how to do, right?
    Tiger to Tiger: Unless you have paid the small phenomenal fee for Apple Remote Desktop Client program for your Tiger computers, as near as I can tell, you're going to have to use VNC to do what you are trying to do. This post has several links to some other posts that tell how to do VNC encrypted through a secure shell tunnel from across the internet at large, Tiger to Tiger; a little more than what you are asking; but a subset of those directions apply here. On your home subnet, you don't need to worry about tunneling through secure shell and in the VNC client program; rather than connect to "localhost:5901" as described in all those posts, you'd just connect to {computerNameOrIPAddressOnYourHomeNetwork}. However, all the descriptive text in all those posts about how to configure the Tiger machine as a VNC server, which requires both Apple Remote Desktop and VNC to be enabled in the remote server computer's System Preferences, still applies in the local subnet case just as it does in the internet-at-large case.
    Tiger to Leopard: Can't be definitive on this one, but I would suspect that there will be a similar process to enable VNC server on the Leopard, as was described in all those Tiger-to-Tiger posts. Again, this assumes that you don't want to, or haven't already, put out a bunch of money for Apple Remote Desktop Client for your Tigers. If you have the ARD client, I am guessing it is a no-brainer for both the Tiger-to-Leopard and Tiger-to-Tiger scenarios. Otherwise, I don't see how you will get this capability unless you can enable a VNC server service (along with the ARD server) in the remote server Leopard's (and the remote server Tiger's) system preferences, and run a VNC client like Chicken of the VNC or JollyFastVNC on the local client Tiger computer that you are sitting in front of.
    PS: and we're not worrying about file sharing or remote login not working, are we? At least not yet?

  • Trouble connecting to OSX server from XP domain members

    Can someone help me out with a problem connecting to our OS X server from Windows XP? Basically, I only have trouble connecting from XP machines that are members of the domain.
    Here are some details:
    OS X Server 10.3.9, bound to domain through Active Directory.
    Windows Services role = Domain Member.
    Computer name (under Windows Services) = macserver
    Connects fine from Macs via Network>Domain>macserver
    macserver IP address: 192.168.1.5
    Sharing 1 folder to all members of the domain.
    I can connect fine from OS X computers and XP computers that are NOT members of the domain
    I can connect from XP domain members via the IP address \\192.168.1.5
    I cannot connect from XP domain members via Network Neighborhood>Domain>macserver, or by entering the computer name. Error message recieved: "The account is not authorized to log on from this location."
    I can ping macserver from any xp machine and it resolves the IP address.
    I can browse the webserver on OSX Server via http://macserver.
    Any thoughts?
    Thanks,
    Eric
    PowerMac G4, MDD   Mac OS X (10.3.9)  
    PowerMac G4, MDD   Mac OS X (10.3.8)  

    I can't remember how I resolved this. I think I had a number of problems, for instance, spaces in fileshare names. I might also have set up the domain incorrectly. Who knows.

  • Wrt310n trouble connecting windows2000

    Hello I just upgraded my wireless router to a WRT310 and I'm having trouble connecting to it via wireless with windows 2000. It worked perfectly before, I used all the same setups as my previous wireless to minimize issues. wireless mode is set to mixed Radio band is Auto Wide Channel: Auto Standard Channel: Auto SSID Broadcast: on Security Security Mode: WPA2 Personal Encryption: TKIP OR AES Key Renewal: 3600 I'm not sure but I think win2k doesn't sport WPA2 Personal?
    Genius is not in the understanding of complexity but in its simplification! by R.Ries
    Windows defined as 32 bit extensions and a graphical shell for a 16 bit patch to an 8 bit operating system originally coded for a 4 bit microprocessor, written by a 2 bit company that can't stand 1 bit of competition. by R.Ries
    Ban Internet Explorer from your website and force upgrades to real browsers, FF, Opera or other

    It does not depend upon the Operating System ... it depends on the wireless adapter you are using ....
    Let me know the wireless adapter you are using ....

  • Trouble connecting Jboss 3.2.4 with Oracle 11g.

    We are facing some trouble connecting 4 JBoss servers to an Oracle 11g server. Oracle server is working as a RAC with two nodes. We have two HP server every one of those have two JBoss application servers version 3.2.4. Each one of those application servers has been configurated in order to work with any of the Oracle nodes. We have this connection string in oracle-ds.xml :
    jdbc:oracle:thin:@(DESCRIPTION=(LOAD_BALANCE=on)(FAILOVER=on)(ADDRESS_LIST=(ADDRESS=(protocol=tcp)(host=csibd01t_vip)(port=1521))(ADDRESS=(protocol=tcp)(host=csibd02_vip)(port=1521)))(CONNECT_DATA=(SERVER=DEDICATED)(SERVICE_NAME=racdb)))
    We start all the four JBoss servers and every thing is going ok, but after about 20 minutes the oracle connections are reset. The exactly error is like this:
    Exception destroying ManagedConnection org.jboss.resource.connectionmanager.TxConnectionManager$TxConnectionEventListener@30d83d[state=DESTROYED mc=[email protected]c4 handles=0 lastUse=1247696255808 permit=false trackByTx=false mcp=org.jboss.resource.connectionmanager.JBossManagedConnectionPool$OnePool@ef9f84 context=org.jboss.resource.connectionmanager.InternalManagedConnectionPool@1d1c3cd]
    org.jboss.resource.JBossResourceException: SQLException; - nested throwable: (java.sql.SQLException: Io exception: Connection reset)
    at org.jboss.resource.adapter.jdbc.BaseWrapperManagedConnection.checkException(BaseWrapperManagedConnection.java:572)
    at org.jboss.resource.adapter.jdbc.BaseWrapperManagedConnection.destroy(BaseWrapperManagedConnection.java:276)
    at org.jboss.resource.connectionmanager.InternalManagedConnectionPool.doDestroy(InternalManagedConnectionPool.java:535)
    at org.jboss.resource.connectionmanager.InternalManagedConnectionPool.removeTimedOut(InternalManagedConnectionPool.java:411)
    at org.jboss.resource.connectionmanager.IdleRemover$1.run(IdleRemover.java:70)
    at java.lang.Thread.run(Thread.java:595)
    Caused by: java.sql.SQLException: Io exception: Connection reset
    at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:134)
    at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:179)
    at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:334)
    at oracle.jdbc.driver.OracleConnection.close(OracleConnection.java:1478)
    at org.jboss.resource.adapter.jdbc.BaseWrapperManagedConnection.destroy(BaseWrapperManagedConnection.java:272)
    ... 4 more
    17:39:25,438 INFO [Server] JBoss SHUTDOWN: Undeploying all packages
    Well, now if I start the four JBoss servers in just one machine every thing works fine. I mean as I already said that I have two Hewllett-Packard machines and in every machine I run two JBoss servers, but if I run the four JBoss in only one machine the thing works... so I think that something is wrong with my RAC... please I hope you can help me.. thanks in advanced.
    Edited by: user11706866 on 17-jul-2009 15:56
    Edited by: Guido-Granobles on 21-jul-2009 12:05
    Edited by: Guido-Granobles on 21-jul-2009 12:06

    Hi,
    Check if connect string is correct...
    I can see csibd01t_vip and csibd02-vip. Is it your vip addresses? Or it is a write error?
    jdbc:oracle:thin:@(DESCRIPTION=(LOAD_BALANCE=on)(FAILOVER=on)(ADDRESS_LIST=(ADDRESS=(protocol=tcp)(host=*csibd01t_vip*)(port=1521))(ADDRESS=(protocol=tcp)(host=*csibd02-vip*)(port=1521)))(CONNECT_DATA=(SERVER=DEDICATED)(SERVICE_NAME=racdb)))
    Cheers,
    Rodrigo Mufalani
    http://mufalani.blogspot.com

  • Trouble connecting to AFP over VPN

    Hi All,
    I regularly connect to my office server via VPN and use an AFP connection to mount share points (or VNC to share the screen).
    Via the same VPN tunnel I also connect to my desktop machine at work using AFP or VNC. Recently, after upgrading my office desktop computer to Yosemite I began having trouble connecting from my home laptop (MBPR running Yosemite as well). I try to connect and get the message "There was a problem connecting to the server xx.x.x.xx" HOWEVER, using that very same VPN connection I am always able to connect to the server at work; just not to my desktop now.
    Both the office server and my office desktop have fixed IP addresses and are on the same subnet etc. At one point I was able to solve the problem and the AFP connection to my office desktop machine worked again for awhile, but then once again stopped working. I've checked that our VPN is assigning valid IP addresses to my client at home, but it still is problematic.
    I'm pretty familiar with our whole system since I'm our low-rent IT guy, and it has functioned smoothly for my team for years -- but I am not terribly knowledgeable of the deeper issues of networking. Because the issue arose after I upgraded my office desktop to Yosemite I feel it must be related to the new OS and how it manages file sharing or something (although I will reiterate that I did have it successfully working at a couple different times, it just seems to stop working for no apparent reason). Oh -- one more thing, I AM able to connect to my office desktop via AFP from other local machines within the office so I know it's File Sharing services are working correctly.
    Any guidance or ideas welcome
    - Keith

    What's the actual exception message? Your URL looks fine to me, though maybe something is not right with the host portion, hard to tell. It could also be a database set-up issue (e.g., your Oracle instance right now is only accepting connections from localhost).
    - Saish

  • Im having trouble connecting to my old HP 5MP on small network

    Im having trouble connecting to my old (but still a great printer) HP 5MP which is connected (be causes it has no ethernet built in) via an Ansante eternet/localtalk bridge to the ethernet network and ti my old G4 Power PC Quicksilver (using 10.4.11). That is shared both by ethernet and (via my vodafone wireless router to my 21" iMac Macbook Pro. When I bought my new iMac and MBP I kept my old G4 so I could still use by SCSI Scanmaker E3+ scanner and my non-USB, non ethernet printer by sharing it from the G4. Worked OK but now not so over either wi-fi or ethernet. I just updated to Lion on the iMac and am on Snow Leopard on the MBP and they say they can't find suitable drivers. My work around has been to print to "Mail pdf" to myself and pick it up on the G4 and print from there direct to the 5MP. But now I can't even connect to the 5MP from there since downloading a software update which was something about enhancements to Airport.
    Have tried resetting tie printing system, repairing disc permissions and rebuilding the drive using diskwarrior on t he G4 but now I can't get any mac to see and add the 5MP. My old Epson Photo stylus 1200 works OK on USB but I need my 5MP tp work. Can you help on that please?

    Those converters like the AsanteTalk are notorious for not re-acquiring Printers that drop out for any reason.
    Get everything else powered up, then cycle off the AsanteTalk, count slowly to 10, then power the AsanteTalk on last.

Maybe you are looking for