Trouble connecting to AEBS wirelessly

I can't seem to connect to my old Airport Express Base Station this morning. I can't log onto the network--it seems to be there, but without enough power to log on. When I physically connect to the AEBS with a data cable, it's fine, and I can change configurations, etc., but can't access it or the Internet wirelessly at all. Any idea what's up?
It is a 4+ year old Airport Extreme...could this be a hardware failure?

Turns out it was a security problem. Clearing the security and resetting it solved the problem.

Similar Messages

  • I am having trouble connecting to my wireless internet. I keep getting message that my network configuration settings have changed. Ive been advised that i need to change settings to look for dynamic ip address ?

    I am having trouble connecting to my wireless internet and am getting the message that my network configuration settings have changed. I have reported it to my provider who advised that they think the Mac is looking for a fixed IP address and they use dynamic addresses. I have had the Mac for months and have not had this problem before. I would appreciate any help please on how to fix this ?

    Then I get a separate pop up that says: Secure Connection Failed. aus3.mozilla:443 uses an invalid security certificate.
    The certificate is only valid for the following names: securelogin.arubanetworks.com, www.securelogin.arubanetworks.com
    (Error code: ssl_error_cert_domain)
    This could be a problem with the server's configuration or it could be someone trying to impersonate the server.
    If you have connected to this server successfully in the past the error may be temporary and you can try again later.
    I have tried many many times!

  • Trouble connecting to my wireless internet

    Hello,
    I'm having trouble connecting to my wireless internet. We have a linksys wireless router, and I know the MAC filter is turned on, so I've added my computer to the router, and I've put the password in correctly, but it keeps saying there is an error connecting to the network. All my other roommates have PC's, this shouldn't be a problem? My Mac should have no problem connecting to this modem, right?
    Thanks

    Hello jennhie,
    You can download the firmware at your router manufacturer's homepage. Look for download>firmware
    If you are not familiar with the process, download the manual as well. It will be very helpful in the update process.
    Hope this will help
    Good luck

  • Does anyone have trouble connecting to their wireless network, after being logged on for some time? Mountain Lion.

    I am having trouble connecting to my wireless network.  It works when I startup my computer but, after a while it can't seem to find the wireless network. I have an Airport Extreme and the light is green. The only way to remedy this problem is to restart my computer. Mountain Lion isn't that great after all not to mention it distorts some images when scrolling. I am kindly asking for some advice, I assume a major update will be coming soon.

    You don't by chance have a "invisible" or "hidden" network enabled on the router?
    Because Mac's won't reconnect automatically now to hidden network only upon reboots, it's sort of like advertising the hidden network if you take the computer elsewhere.
    Also hidden networks are no deterrent to hackers, they see all.
    Also check your time and date, make sure they accurate first, then save that, then make sure it's updated via Apple time servers in your general location (System Preferences > Time and Date) If your being kicked off, your DCHP lease might be expiring too early.
    WiFi, Internet problems, possible solutions
    WiFi security issues, at home and WiFi hotspots

  • Trouble connecting laptop to wireless

    I have a wag54gs installed and a wireless adaptor on main pc. Had trouble with security and could only use laptop wireless with security dissabled.  Ive had some help regarding security its all set up again and wireless is working on main pc.  Laptop however wont connect now on wireless, says aquiring address or limited /no connectivity but works fine if i attach the ethernet cable and use security.  Tried checking setting are the same but must be missing something., probably something simple.  Any help would be appreciate.

    OPEN YOUR VIEW WIRELESS NETWORKS , YOU SHOULD BE ABLE TO SEE YOUR WIRELESS CONNECTION DISCONNECT IT AND RECONNECT!  YOUR ROUTER MIGHT BE WEP ENCYPTED SO YOU WILL NEED YOUR KEY1  THAT YOU CAN FIND ON THE ROUTER INFO, BY TYPING :  192.168.1.1 ON YOUR INTERNET WEB BROWSER! 

  • I am having trouble connecting IPAD1 to wireless any suggestions?

    I am having trouble connecting my IPad1 to Belkin Wireless Router. It was working fine until a couple of days ago. I can use my IMAC okay via wireless. I can see my network on the IPad, but message comes up "unable to join the network XXXX". I have read the Apple recent release to fix this problem...still no luck. Can anyone please help?

    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    Additional things to try.
    Turn Off your iPad. Then turn Off the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    On your iPad go to Settings > General > Reset > Reset network settings and see if that enables you to connect.
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
     Cheers, Tom

  • Trouble connecting multiple computers wirelessly

    I have an airport extreme base station and I am having trouble connecting more than one computer wirelessly to the internet. In fact if I do get the other computer connected, it crashes the connection of my main computer that is always connected. Any help? Am I explaining this clearly enough?

    Can you tell us what happens if you turn wireless off on the computers and temporarily connect both of them to the AirPort Extreme using ethernet? Same problem?

  • 3510 all in one having trouble connecting to new wireless network

    Ok - just to update, at least the drivers are downloadable now ... I'll see if that resolves my issue. 

    Hi guys.  I just switched to a new modem through my ISP (Rogers) that has a built in router and a much faster connection.  (Previously, this 3510 printer was working just fine over my network with a modem and a router that was separate.)  My computer is hooked into the internet via a direct cable and everyone else in the household connects via wireless, which has been set up and works well.  For some reason though, my 3510 refuses to play nice with the modem and connect to the network.   I've tried plugging it in via usb cable, then going into the settings and clicking on the "convert a usb connected printer to wireless" option.  I hit "yes, access the computer or router", then next, it finds my wireless network with no trouble and I type in the required password and "next" - it then takes a while to go through it's "setting up printer on network" .... and then after a while, I get a "MAC address filtering may be enabled on your wireless router" error.  There IS no MAC filtering.  I have "allow all" set on the router.  This shouldn't be an issue.   Has anyone else had this problem?  Is it just a thing with the newer modem/router combos and these older HP printers?  I tried to update the driver, but your website doesn't seem to be letting folks do that at the moment (some error you're fixing, it says?). If you have any suggestions on how I could get past this problem, I'd really appreciate it.  It's driving me NUTS.  Thanks!  All the best, -- Jodi

  • Trouble connecting to home wireless router

    I'm using a Belkin wireless router with security mode of WPA/WPA2-Personal (PSK).
    My iPod touch 2G used to be able to connect to the wireless network, but it can't now. It gives me incorrect password message. Only thing I've done is update the software to 3.0.

    thank you SOOO much!!! I had been struggling for a couple of hours and this solved it all in under five minutes. it seems to be when you change from WEP (my old router) to WPA2 (new router) and not just 3.0. I have a Touch with 2.0 and it was the same story. thanks again!

  • Trouble connecting C4795 printer wirelessly

    Ok, so here it what I have:
    Photosmart C4795 printer
    Mac Mini w/ OS X 10.9.5
    Cisco DPC3825 router
    I have tried everything under the sun to connect this printer wirelessly to my computer to no avail.  I have searched the internet high and low for a solution, but have found nothing.  Please help me with this issue.

    Hello @Greentarpon,
    Welcome to the HP Support Forums!
    I understand that you are experiencing issues when trying to configure your HP Photosmart C4795 All-in-One Printer for wireless printing with your Mac OS X 10.9.5 computer. I would like to work with you today with resolving this network connectivity issue. Now, just so you are aware, HP actually doesn't have a downloadable Full Feature Software and Driver package available for your model of printer on the Mac OS X 10.9 Operating System due to the age of your printer. Therefore, we will be relying on your Apple Updates to load all the software and drivers onto your Mac computer for you printer. Also, because there is no HP downloadable Full Feature Software and Drivers there is no wireless setup for your Mac computer. Therefore, you have two options:
    Option 1: Use a supported Operating System to configure the wireless on your printer. Once the wireless is configured on your printer than you simply add (+) your wireless bonjour printer into your Mac OS X 10.9 computer.
    Supported Operating Systems include:
    Mac OS X 10.4, Mac OS X 10.5, Mac OS X 10.6, and Mac OS X 10.7
    Windows XP, Windows Vista, Windows 7, Windows 8, and Windows 8.1
    Option 2: Run the Push Button or Pin methods of configuring wireless. These options will only work if your router has this capability.
    How to Configure Wireless with Push Button Method:
    1. On the control panel Home screen, touch the button next to Scan.
    2. Touch the button next to Wireless Menu
    3. Touch the button next to WPS.
    4. Touch the button next to Push Button. The printer begins a timer that lasts approximately two minutes to allow time to press the WPS button on the router.
    5. Press the WPS button on the router. The printer connects to the network. 
    6. Touch OK on the printer control panel.
    How to Configure Wireless with Pin Method:
    1. On the control panel Home screen, touch the button next to Scan.
    2. Touch the button next to Wireless Menu.
    3. Touch the button next to WPS.
    4. Touch the button next to PIN. The PIN displays on the control panel. The printer begins a timer that lasts approximately two minutes to allow time to enter the WPS PIN.
    5. Enter the PIN on the router.
    6. Touch Start. The printer displays a PIN.
    7. Touch OK on the printer control panel.
    Once the printer and router are connected, by either the Push Button or Pin Methods, than you simply add (+) your wireless bonjour printer into your Mac.
    How to Install the software
    Click the Apple menu (), and then click System Preferences. The System Preferences window opens.
    Click Print & Scan. The Print & Scan window opens.
    Click the plus sign (). The name of your printer displays.
    Click Add Printer or Scanner.
    Select your printer, and then click Add.
    Click Install, and then click Agree on the software license agreement window to install the software and add the printer to the queue.
    After the installation process completes, verify that your printer displays in the queue.
    Source: Setting Up the Printer for a Wireless Network for the HP Photosmart C4700 All-in-One Printer...
    Please let me know if the steps I've provided resolve your connectivity issues. Should you prefer to run through Method 1 on a supported Operating System, please let me know what Operating System you have on the supported computer  (What's my OS?) and I will provide you with detailed wifi configuration instructions. Good luck!
    X-23
    I work on behalf of HP
    Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
    Click the "Kudos, Thumbs Up" on the right to say "Thanks" for helping!

  • Having trouble connecting to my wireless network

    Hi everyone, my iPad gen 3 can not connect to my wireless network. I have to unplug my router, and repower for it to connect. Even going into settings on the iPad, and putting in the password for the wireless connection, the iPad gives me an error message that the password is incorrect. I was thinking of updating to a new router. My current router is about 3 years old. I am also running Network Magic from Cisco. Can anyone give me any ideas for a solution to this problem? As always, thank you for your help.
    Regards, Paul

    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • MacBook 10.6.7. is having trouble connecting to my wireless network.

    Hi all~
    I am basically having trouble with my wireless connection. I know I have  a functioning connection because my girlfriend is able to connect and surf just fine. However, I try to log on and get the usual error messages. I've tried the network diagnostic and the setup assistant to no avail. They tell me to contact my ISP, but my ISP can't find a problem. Any advice out there? Has my airport gone crazy....is this a hardware issue??

    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • [G505s]Trouble connecting to internet (wireless)

    Hi everyone,
    I am having some trouble with my laptop, at home where I use this device I always use a wireless connection. My phone, Nintendo systems and XBOX have no problems with it. But for some odd reason my laptop has only two of the 5 stripes of reach and my internet is very unstable where it stops working at all completly sometimes.(It's still connected to my router though...) I am certain it's my laptop but I have no idea what it is. Maybe someone can tell me what I could do?

    hi Langin,
    Welcome to the Lenovo Forums.
    Your issue might be similar to this thread.
    Just to check, are you running on these factory default drivers?
    Atheros v10.0.0.242
    Broadcom v6.30.59.87
    If not, can your uninstall your current driver and install this one then observe:
    Wlan Driver (Atheros, Broadcom)
    for 64-bit Windows 
    49.8MB
    In addition, you may want to try what jaxs94 have done which is to uninstall the Catalys Control Center. If you get the same problem though, try to use an ethernet cable and observe.
    Regards
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Having trouble connecting Macbook to wireless FIOS

    I tried looking online and can't seem to find an answer that will fit my situation.  I don't have a Pro.  We recently got FIOS installed and have the Actiontech router.  I am able to connect other devices and computers to the wireless signal, but can't get my mac to work correctly.  It will recognize the router signal and say it is connected, but I can't get it to bring up the internet once it is connected.  Any help would be appreciated.  

    volboy23 wrote:
    I went in and changed the password to WPA as that is better and there were several people saying that should help it, of course after I posted this earlier today.  It still doesn't seem to want to work.  Any thoughts?
    yeah, Mac computers like WPA much better. So if your router is set with WPA and your still having an issue. Then it must be something else.
    Do you have other Wireless devices that work? If so, then it is something on the computer itself.
    If not, then try removing the wireless security (turn the wep/wpa off) and see if you can connect that way. If so, then it has something to do with the security on the wireless.
    If still having issues at this point, and you have no other wireless, then I would suspect the router. (try rebooting and resetting the router, always a good idea to try this) Then if still havng an issue, I'd see if I couldnt get Verizon to replace the router.
    ====================================================================================
    Error exists between keyboard and chair.

  • Trouble connecting iMac to wireless networked HP printer -- printer not seen in

    HP Photosmart Premium 410
    Operating System: OS X 10.9
    I am trying to connect a new Mac with OSX 10.9.5 to an HP Photosmart Premium c410, which is on an existing home wireless network and functions properly with other (Windows) computers in the house. I am following online instructions to enter the Apple System Preferences>Printers and Scanners>+ menu in order to add the printer, but the printer is not visible. If I use the "print sheet," the HP printer shows as a grayed out option and a message that the printer has been offline for more than a month. Any advice would be greatly appreciated.
    Model Name: iMac
      Model Identifier: iMac14,2
      Processor Name: Intel Core i5
      Processor Speed: 3.2 GHz
      Number of Processors: 1
      Total Number of Cores: 4
      L2 Cache (per Core): 256 KB
      L3 Cache: 6 MB
      Memory: 8 GB

    Hi rmikkelsen,
    Welcome to the Support Communities!
    OS X: Printer and scanner software available for download
    http://support.apple.com/kb/HT3669
    Apple delivers third-party software for scanners and printers using Software Update. To set up your printer or scanner, just connect it to your Mac. If software is needed and available, OS X automatically downloads and installs it.
    This article is a comprehensive list of currently supported printer and scanner models and associated software provided by third-party vendors as of 23 January 2014.
    List of printer and scanner software available for OS X
    This list is subject to change. This list is updated as new printer or scanner software becomes available, or when a manufacturer discontinues support for a printer or scanner model. Software Update may  display software newer than what is listed in this article for a short period of time after each update becomes available.
    * = Vendor software recently updated.
    + = Vendor software recently added.
    Hewlett-Packard (HP)
    Company website

    Software available
    HP Photosmart Prem C410 series *
    4.2.1
    P
    S
    Your HP Photosmart Premium 410 is on the list of compatible printers. It appears there has been a software update for this model.  So, you may want to check HP's website above and see if they have software or drivers that you can download for your printer.
    Always try to establish a USB connection with the printer first, then try the wireless option.
    OS X Mavericks: Set up a printer
    http://support.apple.com/kb/PH14143
    OS X: Connecting a Wi-Fi printer to your Wi-Fi network
    http://support.apple.com/kb/ht3500
    Troubleshooting printer issues in OS X
    http://support.apple.com/kb/ts3147
    If all else fails, reset the printing system and install the printer again:
    OS X Mavericks: Reset the printing system
    http://support.apple.com/kb/PH14141
    I hope this information helps ....
    - Judy

Maybe you are looking for