Trouble connecting to Ethernet Wireless Network

We're trying to set up my airport to an Ethernet wireless network. The router is working and it says airport is connected BUT "Airport needs its own IP address and may not connect to the Internet".
My husband is a PC man and is getting frustrated - what do we need to do?
Many thanks.

Hi Sue
] We're trying to set up my airport to an Ethernet wireless network.
Are you talking about an Airport Extreme base station or a Mac with an Airport Extreme card?

Similar Messages

Does anyone have trouble connecting to their wireless network, after being logged on for some time? Mountain Lion.

I am having trouble connecting to my wireless network. It works when I startup my computer but, after a while it can't seem to find the wireless network. I have an Airport Extreme and the light is green. The only way to remedy this problem is to restart my computer. Mountain Lion isn't that great after all not to mention it distorts some images when scrolling. I am kindly asking for some advice, I assume a major update will be coming soon.

You don't by chance have a "invisible" or "hidden" network enabled on the router?
Because Mac's won't reconnect automatically now to hidden network only upon reboots, it's sort of like advertising the hidden network if you take the computer elsewhere.
Also hidden networks are no deterrent to hackers, they see all.
Also check your time and date, make sure they accurate first, then save that, then make sure it's updated via Apple time servers in your general location (System Preferences > Time and Date) If your being kicked off, your DCHP lease might be expiring too early.
WiFi, Internet problems, possible solutions
WiFi security issues, at home and WiFi hotspots

Having trouble connecting to my wireless network

Hi everyone, my iPad gen 3 can not connect to my wireless network. I have to unplug my router, and repower for it to connect. Even going into settings on the iPad, and putting in the password for the wireless connection, the iPad gives me an error message that the password is incorrect. I was thinking of updating to a new router. My current router is about 3 years old. I am also running Network Magic from Cisco. Can anyone give me any ideas for a solution to this problem? As always, thank you for your help.
Regards, Paul

Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

MacBook 10.6.7. is having trouble connecting to my wireless network.

Hi all~
I am basically having trouble with my wireless connection. I know I have a functioning connection because my girlfriend is able to connect and surf just fine. However, I try to log on and get the usual error messages. I've tried the network diagnostic and the setup assistant to no avail. They tell me to contact my ISP, but my ISP can't find a problem. Any advice out there? Has my airport gone crazy....is this a hardware issue??

Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

C4380 trouble connecting to new wireless network

Hi there,
I've just moved house, and my printer doesn't want to connect to the new wireless router.
I've restored the network defaults, plugged, unplugged everything, re-run the setup on both MacBook and Toshiba laptop, and I don't get past the first page of wireless network configuration.
The HP Installer finds my printer via usb cable, and I've ben trying to set up the wireless network via this link. My network name and password are all the, and then it says "Device not connected", asks me to connect via usb, and will not recognise that the usb cable is plugged in at all. So I'm stuck at this bit of the set up.
My diagnostics summary. Fail.
Radio on. Pass.
Radio working. Pass.
Ethernet cable not plugged in. Pass.
Network name found. Fail
MAC address displayed, everything else not applicable or not run.
The printer was previously connected to a d-link router, set up via my MacBook. The new wireless router is a TC7200.U but I don't know anything about it.
Can anyone help?
Thank you.

Let's try this. Make and model of router? Set a static IP in the printer outside the DHCP range of the router. Remove all security on the router temporarily. Change SSID to TEST. Now connect to your new SSID TEST with no security. R U successful? If yes, go back and change your SSID to what you want and try to connect to that SSID. If successful go back and add your WPA2-AES security and try to connect again.
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

3510 all in one having trouble connecting to new wireless network

Ok - just to update, at least the drivers are downloadable now ... I'll see if that resolves my issue.

Hi guys. I just switched to a new modem through my ISP (Rogers) that has a built in router and a much faster connection. (Previously, this 3510 printer was working just fine over my network with a modem and a router that was separate.) My computer is hooked into the internet via a direct cable and everyone else in the household connects via wireless, which has been set up and works well. For some reason though, my 3510 refuses to play nice with the modem and connect to the network. I've tried plugging it in via usb cable, then going into the settings and clicking on the "convert a usb connected printer to wireless" option. I hit "yes, access the computer or router", then next, it finds my wireless network with no trouble and I type in the required password and "next" - it then takes a while to go through it's "setting up printer on network" .... and then after a while, I get a "MAC address filtering may be enabled on your wireless router" error. There IS no MAC filtering. I have "allow all" set on the router. This shouldn't be an issue. Has anyone else had this problem? Is it just a thing with the newer modem/router combos and these older HP printers? I tried to update the driver, but your website doesn't seem to be letting folks do that at the moment (some error you're fixing, it says?). If you have any suggestions on how I could get past this problem, I'd really appreciate it. It's driving me NUTS. Thanks! All the best, -- Jodi

Trouble connecting iMac to wireless networked HP printer -- printer not seen in

HP Photosmart Premium 410
Operating System: OS X 10.9
I am trying to connect a new Mac with OSX 10.9.5 to an HP Photosmart Premium c410, which is on an existing home wireless network and functions properly with other (Windows) computers in the house. I am following online instructions to enter the Apple System Preferences>Printers and Scanners>+ menu in order to add the printer, but the printer is not visible. If I use the "print sheet," the HP printer shows as a grayed out option and a message that the printer has been offline for more than a month. Any advice would be greatly appreciated.
Model Name: iMac
Model Identifier: iMac14,2
Processor Name: Intel Core i5
Processor Speed: 3.2 GHz
Number of Processors: 1
Total Number of Cores: 4
L2 Cache (per Core): 256 KB
L3 Cache: 6 MB
Memory: 8 GB

Hi rmikkelsen,
Welcome to the Support Communities!
OS X: Printer and scanner software available for download
http://support.apple.com/kb/HT3669
Apple delivers third-party software for scanners and printers using Software Update. To set up your printer or scanner, just connect it to your Mac. If software is needed and available, OS X automatically downloads and installs it.
This article is a comprehensive list of currently supported printer and scanner models and associated software provided by third-party vendors as of 23 January 2014.
List of printer and scanner software available for OS X
This list is subject to change. This list is updated as new printer or scanner software becomes available, or when a manufacturer discontinues support for a printer or scanner model. Software Update may display software newer than what is listed in this article for a short period of time after each update becomes available.
* = Vendor software recently updated.
+ = Vendor software recently added.
Hewlett-Packard (HP)
Company website 
Software available
HP Photosmart Prem C410 series *
4.2.1
P
S
Your HP Photosmart Premium 410 is on the list of compatible printers. It appears there has been a software update for this model. So, you may want to check HP's website above and see if they have software or drivers that you can download for your printer.
Always try to establish a USB connection with the printer first, then try the wireless option.
OS X Mavericks: Set up a printer
http://support.apple.com/kb/PH14143
OS X: Connecting a Wi-Fi printer to your Wi-Fi network
http://support.apple.com/kb/ht3500
Troubleshooting printer issues in OS X
http://support.apple.com/kb/ts3147
If all else fails, reset the printing system and install the printer again:
OS X Mavericks: Reset the printing system
http://support.apple.com/kb/PH14141
I hope this information helps ....
- Judy

Macbook Air has trouble connecting immediately with wireless network

My Macbook Air seems takes a while to find the wireless network (but it does eventually find it). I get several "No Internet Connection" dialogue error boxes before the computer finally finds the network. How do I get rid of this and why is it doing it? My MacPro works just fine finding the wireless network.

From your signature it seems you didn't upgrade to Snow Leopard. If not, that could solve your problem. I had exactly the same issue under Leopard, but upgrading to Snow Leopard solved it completely.

I'm having trouble connecting to my wireless network/router

I see my network but when I try to connect automatically is gives me a timeout message.

kimdpb wrote:
Wireless is working for all the other devices
Using a Cisco router with Network Magic Interface....it doesn't see the Mac Book but the Mac sees the network.
Can you see the network in the Mac's wireless network list?

"connection timed out" when connecting to outside wireless networks

I have had trouble connecting to some wireless networks. I have no problem at home, at various cafes and such, nor at work. Some hotels or friends' houses that I've tried to connect to give me the message, "connection timed out" after I've entered the correct network and password. The router appears to work fine, since other people can get on the network. What am I missing?
Any advice would be greatly appreciated.
J

Finally figured out what it was. Had to reset settings on the router after a lightning storm, contacted Linksys and they walked me through the appropriate sequence, troubleshooting on their end took about 20 mins but they were extremely helpful and very familiar with OS 10.5, all this time I thought it was the Mac's fault.
Derek

I am having trouble connecting to my wireless internet. I keep getting message that my network configuration settings have changed. Ive been advised that i need to change settings to look for dynamic ip address ?

I am having trouble connecting to my wireless internet and am getting the message that my network configuration settings have changed. I have reported it to my provider who advised that they think the Mac is looking for a fixed IP address and they use dynamic addresses. I have had the Mac for months and have not had this problem before. I would appreciate any help please on how to fix this ?

Then I get a separate pop up that says: Secure Connection Failed. aus3.mozilla:443 uses an invalid security certificate.
The certificate is only valid for the following names: securelogin.arubanetworks.com, www.securelogin.arubanetworks.com
(Error code: ssl_error_cert_domain)
This could be a problem with the server's configuration or it could be someone trying to impersonate the server.
If you have connected to this server successfully in the past the error may be temporary and you can try again later.
I have tried many many times!

MacBook Pro cannot connect to a wireless network

I am having the following problem with my MacBook Pro trying to connect to a wireless network using a 2WIRE Gateway wireless Router from Bell that worked perfectly until last night. My network preferences pane is saying "AirPort has the self-assigned IP address 169.254.227.XX and will not be able to connect to the Internet." I'm not a techie and I've tried everything I know and cant get my MacBook to connect to the internet using the wireless network in my home. I'm using ethernet connected directly to my router for this! It's killing me. Any help would be greatly appreciated.
Thanks in advance.

OK. The wireless network was selected. In the Preferences / Network pane I removed Airport by selecting it and hitting the - button and then created a new Airport by hitting + and selecting Airport. I'm getting the same result. Full network signal once the ethernet cable is connected. Greyed out icon with ! once I remove the ethernet cable and no internet. I appreciate your help so far. Any other thoughts? We also have an iPad, iPhobe, iPod, and two iMacs on the same network. All of them are connected no problem. My Macbook also still connects to the network in my workplace no problem. This all just started happenening yesterday and I don't believe I changed or upgraded anything. I just came home and it had stopped working.

HP Officejet Pro 8600 - Trying to connect to wrong wireless network.

I have cable wireless and due to provider requirements I have had to disable my hub wireless and plus in another router to the hub to provide wireless. The hub has a network name and the router has the same name but shows a "2" after it. When I try and connect my printer to this itonly picks up the Hub and says wireless is disabled which is correct. How can I get it to recognise the router instead?
I hope this makes sense

Hi Pushoz,
Please let me take a moment to say "Welcome Back" to the HP Forums. I see that it has been awhile since your last visit.
To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I see that you are having some issue with connecting your printer to your wireless network.
Here is a document that will assist you with this issue and explain in detail how to connect over the wireless network.
Please click on the following link's for Installing the Printer Software on a Wireless or Wired (Ethernet) Network and for
Connecting the Printer After Changing Your Wireless Network.
Please write me back if you have any other questions.
I hope you have a great day and if I don't hear back from you today, I hope you have an excellent weekend.
Cheers,
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

Problem connecting PC to wireless network

I am running Airport express and last week I set it up so I required a password - WPA with a network key. I have never had trouble connecting my mac. The day I set it up, I was able to connect my PC to the network - it asked me for network key, and voila it connected. Today I am connected on my powerbook but the pc won't recognize the wireless network. When I try to "repair" the wireless network connection it says windows could not finish repairing because it could complete connecting to the wireless network. Yes, I know this. So why won't it connect? When I "view available networks" on the pc, nothing shows up, but when I click on "change the order of preferred networks" my network is there. I check the properties and it even has the saved network key. I am at a loss, and unfortunately not too savvy with this type of thing. Any help would be appreciated.

Sorry for wasting anybody's time...the radio switch was on off on my PC. All is working now...

Problem connecting laptop to wireless network

Greetings.
I recently installed ArchLinux on my asus N80Vb laptop. I downloaded the .iso for the core installation and burn a CD which I used to install. Checksums were a match. I followed instructions on the installation guide and everything seems to have been a success. I installed all packages which seemed to have anything to
do with wireless networking.
The only problem is that I am having difficulty getting my laptop to connect to the wireless network in the house.
The network wireless interface in the laptop is an Intel WiFi Link 5100. I am assuming the driver is loading properly: output from dmesg | tail is:
iwlagn 0000:03:00.0: Unable to find TIM Element in beacon
wlan0: Selected IBSS BSSID 2e:xx:xx:xx:xx:xx based on configured SSID
iwlagn 0000:03:00.0: Unable to find TIM Element in beacon
(the x's in the second line are because I wasn't sure if it was a good idea to post the actual numbers).
I followed the manual wireless setup process <a href="https://wiki.archlinux.org/index.php/Wireless_Setup#Part_II:_Wireless_management">here</a> to try to establish a connection and couldn't connect: trying to ping www.google.com gave an unknown host error.
I have netcfg and created a configuration file with the following:
CONNECTION='wireless'
DESCRIPTION='wireless internet connection
INTERFACE='wlan0'
SCAN='yes'
SECURITY='none'
ESSID='mynetwork'
IP='dhcp'
CHANNEL='6'
When trying to use netcfg I get "Wireless network "mynetwork" not present. [FAIL]
Using iwlist doesn't show <i>mynetwork</i> either, but I know its there because all the PCs, a wii and another laptop are all connected to it without any problems.
(I added CHANNEL='6' because my PC running Fedora shows that it is connected to mynetwork on channel 6, so I thought maybe...).
Connecting via a wired connection is also a possibility but would prefer not to.
Any suggestions?
Regards,
Topaz

ifconfig:
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
wlan0 Link encap:Ethernet HWaddr 00:21:5D:2E:B1:CC
inet addr:192.168.0.103 Bcast:0.0.0.0 Mask:255.255.255.255
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
iwlist wlan0 scan:
wlan0 Scan completed :
Cell 01 - Address: 22:CB:4E:FF:34:B1
Channel:11
Frequency:2.462 GHz (Channel 11)
Quality=29/70 Signal level=-81 dBm
Encryption key:on
ESSID:"walker"
Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 18 Mb/s
24 Mb/s; 36 Mb/s; 54 Mb/s
Bit Rates:6 Mb/s; 9 Mb/s; 12 Mb/s; 48 Mb/s
Mode:Master
Extra:tsf=000001fb84a6f00a
Extra: Last beacon: 2816ms ago
IE: Unknown: 000677616C6B6572
IE: Unknown: 010882848B962430486C
IE: Unknown: 03010B
IE: Unknown: 2A0100
IE: Unknown: 2F0100
IE: Unknown: 32040C121860
IE: Unknown: DD090010180201F4000000
Cell 02 - Address: 00:1E:58:C7:D8:03
Channel:11
Frequency:2.462 GHz (Channel 11)
Quality=25/70 Signal level=-85 dBm
Encryption key:off
ESSID:"DLinkVWR"
Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 22 Mb/s
Bit Rates:6 Mb/s; 9 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s
36 Mb/s; 48 Mb/s; 54 Mb/s
Mode:Master
Extra:tsf=00000008a03f670c
Extra: Last beacon: 3026ms ago
IE: Unknown: 0008444C696E6B565752
IE: Unknown: 010582848B962C
IE: Unknown: 03010B
IE: Unknown: 2A0100
IE: Unknown: 32080C1218243048606C

Trouble connecting to Ethernet Wireless Network

Similar Messages

Maybe you are looking for