Trouble connecting to LTE with the iPhone 5, Help??

Just got the iPhone 5 with Telus and having a problem with the LTE, i live in the GTA and my phone is only getting 3G reception, even though i have LTE enabled, i have tryed resetting the network, but nothing. Sometimes i will get the LTE others only 3G. Is there a way to fix this so i get LTE all the time

Check your country and carrier that supports LTE
http://support.apple.com/kb/HT1937
Also check your carrier LTE coverage.
Message was edited by: ckuan

Similar Messages

  • I am having trouble connecting to internet with my iphone 5,  Are there any issues with with iphone 5 that would cause this problem?

    I am having trouble connecting to internet with my iphone 5,  Are there any issues with with iphone 5 that would cause this problem?

    Perhaps something in Apple's support article on troubleshooting problems with WiFi connections will help:
    http://support.apple.com/kb/TS1398
    Regards.

  • HT201210 when i try to update to 6.0, itunes says "itunes could not back up the iphone "****** iphone" because a session could not be started with the iPhone? help?

    when i try to update to 6.0, itunes says "itunes could not back up the iphone "****** iphone" because a session could not be started with the iPhone? help?

    i hope you have 30 dollars to blow on top of what you already spent on your ipod....because thats what apple wants to answer your question ...if its out of warranty

  • I have trouble connecting a Headset with the Speck Candyshell case installed

    I have a iPhone 4 with aCandyShell case. I do not like the headset that comes with the iPhone as it hurts my ears, and while I can plug in that headset with the CandyShell installed I would like to use a different headset... ideally a Sony MDR V300 that I have, but the plug on that is too bulky to plug into the phone with the CandyShell installed.  I would like to know if there are any sort of adapters that would fit the headset receptacle on the iphone  with the Candyshell installed, and let me connect the Sony headset to it.  Also I wonder if the iPhone requires a special connection... I see that the Sony appears to have only two insulator bands around the plug while the Apple one appears to have three.  Thank you.

    Hey Doug,
    Thanks for your post, and welcome to the Apple Support Communities.
    I understand that are having an issue with your MacBook Pro recognizing the Airport card. I recommend we follow these resources:
    Intel-based Macs: Resetting the System Management Controller (SMC)
    http://support.apple.com/kb/HT3964
    You may also want to reset your computer's PRAM:
    OS X Mountain Lion: Reset your computer’s PRAM
    http://support.apple.com/kb/PH11243
    Note: Resetting PRAM may change some system settings and preferences. Use System Preferences to restore your settings.
    Thanks,
    Matt M.

  • Will the camera connection kit work with the iPhone 4s and iOS 5?

    I haven't been able to find anything in the forum regarding the iphone 4S / iOS 5 and the camera connection kit; did any of the developers work with this piece of hardware when testing iOS 5, if you aren't allow to answer I understand, I'll just find out for myself on Friday.....

    grrr...i love apple products, but that the camera connection kit does not work with an iphone 4(s) make me angry about some apple philosophies. it is a good example of user restrictions from apple which make me feel like i am in a kindergarten.
    that the camera connection kit does not work with my iphone, makes no sense to me.
    hardware quite the same like ipad, nice screen with balanced colors (iphone looks good compared to my calibrated eizos) and screen size more than enough to do some basic edits.
    would be great sometimes to import and post/email photos from my camera, when i am on the road.
    i do not always want to carry the ipad with me.

  • Will the iPad Camera Connection Kit work with the iPhone 4?

    Subject says it all, wondering if this will work....
    GJM

    No, please search.
    http://www.tipb.com/2010/06/26/iphone-4-support-ipad-camera-kit/

  • ITunes could not restore the iPhone because the backup was corrupt or not compatible with the iPhone

    I backed up entire iPhone5c iOS8 to my Windows 7 with iTunes latest, and now at the restore I am receiving a massage:
    "iTunes could not restore the iPhone because the backup was corrupt or not compatible with the iPhone"
    Please Help!!!!!!!!!!!!!!

    Had the exact same problem whilst upgrading my iphone 4 to ios5. Lost all my data.
    Backed up ios 4.3 (8F190) iphone4. Upgraded to ios 5.1 (9B176), and then tried to restore.
    No joy, repeated the restore attempts countless times - lost all my data
    Tried again with a simulated test.
    Created a new itunes account on a new PC (64-bit windows 7), latest itunes(10.6.1.7- 64 bit).
    As my data is toast, I'm using the ios 5.1 phone to try to see if it was me or an apple bug, or something elsewhich caused this to happen.
    After quite a few more hours at it, it looks like a bug in iTunes / ios. I would be very happy to be wrong, though.
    Tried repeatedly restoring an ios 4.3 backup to 5.1 - no joy.
    Happy to try again - it does restore partially (got the call register transferred, but no SMS'es or anything else).
    Any ideas?

  • Is anyone else having trouble setting up messages with the new mountain lion software? I keep getting a notification that i cant sign in and it is saying, check network connection and try again, but i have full wifi bars, thanks, Justin

    is anyone else having trouble setting up messages with the new mountain lion software? I keep getting a notification that i cant sign in and it is saying, check network connection and try again, but i have full wifi bars, thanks, Justin

    Install this to get X11 functionality back in 10.8
    http://xquartz.macosforge.org/landing/
    Worked great for me and others.
    Jerry

  • When I connect to itunes with my iphone I keep getting the error -42110 but I am able to get on itunes and download a cd but it will not sync. please help

    When I connect to itunes with my iphone I keep getting the error -42110 but I am able to get on itunes and download a cd but it will not sync. please help

    http://borgdatanode42.selfhost.me/blog/index.php?#param=id_48
    try to using iTunes via remotedesktop? try without.

  • Iphone 4S - Windows Vista - 64 Bit (and photoshop elements 9.0) is not recognizing my iphone as a camera - therefore I cannot download pictures from my iphone. iTunes works fine with the iPhone, but I do not see it in "My Computer" when connected via USB

    iphone 4S - Windows Vista - 64 Bit (and photoshop elements 9.0) is not recognizing my iphone as a camera - therefore I cannot download pictures from my iphone. iTunes works fine with the iPhone, but I do not see it in "My Computer" when connected via USB.  I already tried uninstalling and reinstalling iTunes....still nothing.  Any ideas?

    Thank u verrrrrrrrrrry much FoxFifth u save my life thank u.

  • Please help me with the iphone 4 trouble

    I'm using iphone4 and i saw a new update IOS7 and i press to update,the iphone is  updating than it turn off for 5 minutes later it turn on again but with the app's logo and it start to repeat again and again and I can not connect to itunes to fix,I do not know what to do ,hope you guys will help me with the iphone,i reallly need it right now

    Make sure you have the Latest Version of iTunes (v11) Installed on your computer
    iTunes free download from www.itunes.com/download
    Christine Hua wrote:
    the iphone is  updating than it turn off for 5 minutes later it turn on again but with the app's logo and it start to repeat again and again and I can not connect to itunes to fix,
    See Here  >  http://support.apple.com/kb/HT1808
    You may need to try this More than Once...
    Be sure to Follow ALL the Steps...
    But... if the Device has been Modified... this will Not necessarily work.
    Unauthorized modification of iOS  >  http://support.apple.com/kb/HT3743

  • I've got a payg sim: i've been given an iphone 3g, and when i connected it to my mac and itunes, a message told me that the sim was :not compatible" with the iphone. is this because, as i've been told, my card is an old style sim and i need the newer styl

    i've got a vodsaphone payg sim: i've been given an iphone 3g, and when i connected it to my mac and itunes, a message told me that the sim was :not compatible" with the iphone. is this because, as i've been told, my card is an old style sim and i need the newer style that works In smart phones? if so, how do i go about getting the right card.

    Contact your carrier & get a new sim...they should give you one for free.

  • Anyone having trouble with this phone and their in car bluetooth?  Calls dropping not recognizing the device.  Had the car bluetooth reset at dealer. They said it is a common problem with the iPhone?

    Bluetooth in car is not recognizing my device and when it does it will only stay connected about 5 minutes.   Blue tooth has been reset at the dealer. They said it is very common with the iPhone? The car is a 2014 Toyota Highlander.  This is very very frustrating as I have a 45 minute commute to work and do not want to have to hold my phone.... Thank you for any help.

    sstaylor2001 wrote:
    I have already done all of that.  It still doesn't work. My husband has the same phone and a 2013 toyota and his is fine. Toyota told me it is the brand new cars and the new apple update.  Need to figure something out.  This phkne is useless now and I've had a iPhone for 5 years
    Wow you would think the newer car is just an updated version of what your husbands has.
    I wonder if your husbands car was updated to the same connect system if his would not connect?
    Does your husbands phone work because he does not have the new iOS from Apple?
    Can he hook to your connect system in the car?

  • I have purchased a eos 6d. When I use it with the iPhone app the connection dies after about five m

    I have a 6d and when I use it with the iPhone app the camera turns off after about five minutes and the connection is lost. So when I am photographing wild life I keep having to break cover to reactivate the connection. Is this correct or is there a way to keep the connection alive.

    You just need to go into the menu and set the camera's sleep mode to "off" or "never". It sounds as if it's currently set to 5 minutes.
    Letting the camera sit active continuously, i.e. preventing it from going into sleep mode, will drain the battery(ies) a lot faster. I don't have a 6D, nor do I leave them on full time (in fact I set sleep mode to a very short duration, since tapping any button on the camera quickly re-awakens it).... so I really don't know how quickly a battery will drain. But you might be prepared with spares. If battery life is too short for you purposes, you could add a battery grip which will double the battery capacity.
    Alan Myers
    San Jose, Calif., USA
    "Walk softly and carry a big lens."
    GEAR: 5DII, 7D(x2), 50D(x3), some other cameras, various lenses & accessories
    FLICKR & PRINTROOM 

  • Hello.I wanted to upgrade my iPad 1 to iOS 5.1 Over the Air.I was running iOS 5.0.1.It said it had an error connecting to server.It is already 5 hours i cant install this update.I also have an iPhone 4 with iOS 5.0.1 with the same issues.Help please!

    Hello.I wanted to upgrade my iPad 1 to iOS 5.1 Over the Air.I was running iOS 5.0.1.It said it had an error connecting to server.It is already 5 hours i cant install this update.I also have an iPhone 4 with iOS 5.0.1 with the same issues.Help please!

    You're probably running into the servers simply being swamped. Thousands of people are all going for the software update at the same time. Give it a try again and if that doesn't work, then try plugging it into your computer and trying it that way.
    I didn't get a notion of the size, it doesn't seem to be as big as the 700 meg 5.0 update, but it did take me 20+ minutes to download via cable internet so it's a large file. That in and of itself takes a while.
    If you're trying to download it directly to your iPhone, you'll need to be on wifi since I'm sure it's well over the 20 meg file size limit for 3G.

Maybe you are looking for

  • Excise Base value while Stock transfer invoice

    I am generating the Stock tranfer excise, i am able to get the entries for BED, EC and SHEC but the system is not generating any value at excise base field at table J_1IEXCDTL, however, the same is getting generated when i am doing sales. Please advi

  • IDVD menu transitions help!

    Hey guys, I have a quick question about iDVD. Is it possible to have a sound only play when you enter into a menu? For example - If i enter the extras menu, i want a short 10 second sound to play. Is there any way in iDVD to do that? thanks, Dustin

  • Edge audio not playing in DPS

    I have buttons to trigger different audio files (mp3) in edge. When previewed on the web it plays fine. Once the oam file is imported to InDesign the audio is gone both on desktop preview and ipad. Any help would be appreciated.

  • Connecting to MySQL with JDBC in Reports

    Hi, I need help connecting to a MySQL db through oracle reports using a jdbc connection. I have downloaded the MySQL JDBC driver:mysql-connector-java-3.0.17-ga-bin.jar. I can succesfully use it to connect if I write a simple java program. So I know t

  • Unexpected Signal : 11 with hotspot VM

    While runnig my application I got the folloing error with JDK1.4 but it works properly with JDK1.2 Unexpected Signal : 11 occurred at PC=0xFE1DC6C0 Function=[Unknown. Nearest: JVM_GetCPFieldClassNameUTF+0x43A4] Library=/net/vp/mvp/vogon/java/j2sdk1.4