Trouble connecting to my xbox 360 (wrt54gs)

hi there. im fairly new to these forums, but have been using the linksys wrt54gs roiuter for a while without problems. untill recently that is. when i tried to connect my xbox 360 wirelessly to this router it would not work. i found a thread with a good tutorial on it by shadowzodeath but after following this through i still could not connect my xbox, and managed only to knock out the internet for the whole network. any suggestions as to what i might be able to do to fix this would be much appreciated.
Thanks in advance!
jonnywhite!

hi. my service provider is virgin media, and my xbox is connected wirelessly.
the xbox gets to the ip check where it fails.
any help appreciated.

Similar Messages

Trouble Connecting a Wireless Xbox 360 Controller to Windows 8.1 via the Play & Charge Kit

I've been trying to connect a standard black wireless Xbox 360 controller to my PC, a Dell Inspiron 17R Special Edition (what makes it special is a mystery to me, but that's the name) with the standard Play & Charge Kit.
I downloaded the drivers from Microsoft's website <http://www.microsoft.com/hardware/en-us/d/xbox-360-wireless-controller-for-windows>. Since there was no version for Windows 8.1, I downloaded the version for windows 7 (64-bit) and ran the installer
in compatibility mode. The installer ran just fine, and I was able to run joy.cpl with no trouble. The trouble was, my controller doesn't show up in the list of game controllers, which is blank.
Under Devices and Printers, an item named "Xbox 360 Wireless Controller via Play and Charge Kit" appears in the "Unspecified" category. When I look at the properties of this device, there are only two tabs, "General" and "Hardware".
Under the "Hardware" tab, there is a device also named"Xbox 360 Wireless Controller via Play and Charge Kit" whose properties have all the proper drivers and suchlike.
Help!

Uninstall all the driver.
Download and install the latest driver,or,you may try the same to get via Windows Update.
You may post here:
http://forums.xbox.com/
S.Sengupta, Windows Entertainment and Connected Home MVP

Can a 23 or 30-inch display be connected to a XBOX 360 or PS3?

Can a 23 or 30-inch display be connected to a XBOX 360 or PS3?
Thanks.

If your PowerBook has a dual-link DVI port, it will work with the 30-inch Cinema Display; this port can be found on a PowerBook with a clock speed of 1.67GHz. Neither the PowerBook nor the MacBook has upgradable graphics.
(17553)

BT Home Hub connection issue on XBOX 360

I have just upgraded from a BT Home Hub 3, to the BT Home Hub 4, before the upgrade I ran Sky TV wired, and 3PCs wifi, my Ipad and my Iphone. I also ran my XBOX 360 wifi, and a PS3 wifi, all worked no problem.
Now I am on BT Home Hub 4, all my connections are the same all working well apart from the XBOX 360.
I have tried doing the fix on the BT site logging into the Hub changed the SIDD and set the other bit to NO. this did not work.
I then reset the XBOX to factory settings as this was in another fix, I then reset the XBOX to the Hub 4, logged on to call of duty ghosts got half way through a game it crashed out saying no conection reset to test conection.
The Hub will conect to my XBOX 360 but only stay conected for up to 14 mins at most.
Do I need to go back to my BT Home Hub 3, Can any body help its starting to be a pain. As one good person said use a wired conection that would be good, but due to location would be hard. I did think upgrading was ment to make things better not harder. Please Help.

To add, I had on online chat with BT, they said that no problems exist about XBOX 360 and the BT Home Hub to do with wifi.
If this is the case why have a fix on the BT site, that does not work may I add well not on my XBOX.
I found BT online chat not much help in this case.
Please advise and help

Connecting macbook to Xbox 360, HOW?

Hi guys,
I have an xbox 360 and a new macbook. I want to connect my macbook to the xbox 360 to view itunes library and photos etc. How do I go about this, ie what cables etc do I need? Can I connect now using the stuff I have?
xbox 360
macbook
BT HomeHub
Ethernet Cable
Airport Extreme Built in to macbook.
Help much appreciated,
Baz, Belfast, Northern Ireland.

I use a program called Connect 360 from Nullriver Software which is free, just have a look on Google for it. It connects to your macbook via your wireless connection. You can watch .wmv and play music from your itunes. Just put the program on your macbook and it is very easy to set up.

Connecting to an xbox 360

I've been driving myself crazy this afternoon, trying to get my xbox 360 to connect to the internet via my Airport Express.
I know it can be done, at least with an Extreme (in b/g only mode), because I used to have it hooked up to my old roommates setup like that.
My xbox and its wireless adaptor "sees" my wireless network, but fails to connect to it.
Can someone determine once and for all, whether or not the auto settings on the 360 do in fact work. And if not, just what I should be doing?
I note that a lot of the proposed solutions on the net precede the changes that the last update to the Airport Admin utility brought.
I should note, that my connection is as follows:
DSL to Airport Express via PPPoE - sharing out the net to my devices.
My Wii has no problem connecting.
Big help needed here, and will be much appreciatd.

Yeah, the xbotch only supports 802.11b. I have my extreme configured to be n/b/g compatible, and it seems to work fine. Problem is that I have another xbotch in my bedroom which is on the other side of the house. I picked up an express to use to boost the signal from my extreme to that side of the house. The express comes online and connects to my airport extreme, but it doesn't extend the signal at all, my xbotch seems to ignore the express which is basically right next to it, and connects to the extreme on the other side of the house, thus only getting one bar of connection. If the express configuration software actually worked, I might be able to troubleshoot the problem to get it to actually boost the signal, but it doesn't even let me configure it all so basically I'm screwed.

Problems with internet sharing/network connection/ethernet and XBOX 360

So basically I have a sent my Mac Book Pro 13" (Snow Leopard) away to be fixed, and in return I got a loan Mac Book Pro 15" (Lion). In the two weeks my Mac book was away getting fixed I purchased an XBOX 360, because of my location I am unable to use wireless on my XBOX, so instead I connect the loan Mac Book to the XBOX 360 via network cable.
This worked fine and I could now connect to XBOX Live and be on the Mac Book at the same time.
So today my Mac Book (13") is returned, I connect everything up exactly the same also changing the settings on internet sharing making sure that it can be used to send the connection to other devices via ethernet.
But it just wont connect.
The XBOX doesnt find the connection like it did before, and it also doesnt register on the MAC Book either.
I've tried different cables, the same cable I used where it worked before.
I've tried turning of Virus protection.
Both still at both ends it is not registering a connection, I have used this Mac Book before through a network cable so I dont think there is a problem there, to my knowledge everything is the same as I did on the other Mac Book but this one does work.
Have you any advice or tips on how to get this to work?
Thanks for your time.

What I did to get my network running again (although I still haven't found out why DHCP has stopped working):
1. Open the Control Panel of the computer that's trying to connect to the network (not the computer sharing the internet connection)
2. Go to 'Network' panel, and select the AirPort connection
3. Under the 'TCP/IP' tab, change 'Configure IPv4' pull-down menu from 'Using DHCP' to 'Manually'.
4. Enter an IP address between 10.0.2.2 and 10.0.2.256 (I randomly chose 10.0.2.40), a Subnet Mask of 255.255.255.0, and enter 10.0.2.1 in the Router box.
5. Click "Apply now"
The computer should now be connected to the network, and able to access the internet. If not, you may need to manually enter a DNS server - put '4.2.2.1' (or an IP for a DNS server provided by your ISP) into the 'DNS Servers' box.
You need to do that process for each computer you're trying to connect to the shared network, making sure you enter a different IP Address for each.

Connecting T6100 to xbox 360

someone please help me!!!! i got the inspire t6100 surround system but i cant work out how to connect it to my xbox 360! is there any way to connect using a digital optical cable?

@jason-cl
Sorry buddy, why creative is still recommending people to buy DDTS-100 and still advertising it on its website ? I thought the product is discontinued. I think creative should remove it from its website if it's discontinued. Please kindly make clear of this. A lot of people desperately search for this great product, I'm one of them, luckily I can get one without any warranty, but not everyone as lucky as I am. Thx

How do i connect to my xbox 360 wireless

Ive tried the xbox 360 website but it was very unhelpfull i was hopeing that someone could tell me how to acsess my routers settings and connect the xbox 360 and my computer for xbox live.

anyone im new with this stuff so it would also help for a step by step instructions

Xbox 360 WRT54G v2 problems

I have not had problems with my router until this past weeked. Ever since december 2006 my 360 has had an open NAT connection, but this past weekend it randomly switched to moderate. Is there any way i can fix this problem, because it is preventing me from playing with a handful of my friends.

1st, assign a STATIC or MANUAL IP address on your XBOX 360, suggested values are:
IP: 192.168.1.5
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.1.1
2nd, log-in to the router interface. To do that, open up IE and type the numbers 192.168.1.1 (username just leave it blank, password as a default is admin). Then go to the Applications and Gaming tab.
For the Application name, input XBOX. Start and End Port Value is 3074. IP is 192.168.1.5. Then save the settings. That should hopefully fix your issue.

Using a dongle and connecting with an Xbox 360...

Hi guys,
Quick question, i've moved into my new uni place but it hasn't got any internet. So im looking at getting a dongle but I still want to hook up my xbox to xbox live. Is there a way of feeding the internet through my imac (which is using the dongle) to the xbox. If its any help i do have the extra wireless box for the xbox and also an either-net cable.
Thanks!

You X-Box can connect to the internet thru the Mac using either wifi or ethernet, whichever works best for you.
If you want Ethernet, connect a cable between them
If you want wifi, you need to first create a network.
System prefs -> Network.
Select Airport then click on Network name: and select *Create network...*.
Give it a name, tick require password.
Now go System prefs -> Sharing.
Click on *Internet Sharing*.
Set *Share your connection from:* and select the dongle (likely showing up as USB).
If you connect them using Ethernet, set *To computers using:* and select Ethernet.
If you connect them using wifi, set *To computers using:* and select Wifi.
You will need to enable wifi on the X-Box and connect with the password you set above.

WRT54G v2 with Strict NAT when connected via ethernet to Xbox 360

Hello, I apologize if this is in the wrong board as the router, although it is a wireless model, is connected to the Xbox 360 via ethernet cable, so I was a bit torn on where to place it. Router Model, Firmware version: WRT54G v2, v4.21.1 The problem and details are as follows: The Xbox 360 is running on the default settings. Literally, I plugged it into the router via ethernet and it automatically grabbed an IP (192.168.1.101) and the right information to connect to Xbox Live. The router is still running the default range of 50 IPs, so 100 to 149; the 360 was just the second thing to connect. Another computer is connected to the router via ethernet and a laptop is connected wirelessly, if this might affect the case at all. When using the Network Test feature of the Xbox 360, everything is operating perfectly except the NAT is giving me a Strict reading. Some of my games require an Open NAT for me to be able to access some features such as hosting a co-op match. Simply put, what do I need to do inside the router's settings that would give me an Open NAT on the Xbox 360?

well try reducing the MTU values to 1365 on the router, also try triggering 88, 3074 ports on the router...

Does the Xbox 360 wireless adapter even work with the WRT54G wireless router?!!? If so, how???

I just bought a WRT54G wireless router (Ver 8.0; firmware updated to latest). I have successfully connected my wireless laptop using WEP security, but I'm at wits end trying to get the Xbox 360 wireless adapter to work. (It worked just fine with my Netgear router until that router recently died.)
When I do the "Test Media Connection" routine (you XBox 360 users know what I'm referring to), the Xbox immediately recognizes the Network Adapter and indicates that it is connected to the Wireless Network, but it inevitably fails the next step in the process: IP Address. I have the set-up for the IP address to be assigned automatically by the router (which is set for DHCP Server enabled).
I have gone around the mountain innumerable times myself and then with well-meaning friends who say try this, try that, try this, try that. I've had to re-establish my laptop set-up so many times I wanna scream!
Are the Xbox 360 wireless adapter and the WRT54G even compatible? If so, what am I missing here? I'm not too technical and obviously in over my head, but this ought not be that hard.
Please, please do NOT respond unless you KNOW the answer! I don't mean to be curt, but I'm over / past "suggestions to try."
Thank you VERY much for your time and consideration if you can help me.

I don't think that the X-BOX adapter is not compatible to wireless rotuer .... there are few settings you can try on the router ... Access router setup page ... Please click on the tab "Application and gaming" and click on sub tab "Port range forwarding" 1) On the first line in Application box type in "Xbox", in start box type in 88, in end box type in 88, in protocol keep it both, in ip address type in 192.168.1.20 and give a check mark on enable box. 2) On the second line in Application box type in "Xbox", in start box type in 3074, in end box type in 3074, in protocol keep it both, in ip address type in 192.168.1.20 and give a check mark on enable box. 3) Now save the settings 4) Once you return to the setup page, click on the tab "Administration" and disable the UPNP and save the settings. 5) Now assign the given ip address on your xbox ip address :- 192.168.1.20 subnet mask :- 255.255.255.0 default gateway :- 192.168.1.1 Please assign the dns address on the xbox primary dns :- 4.2.2.2 secondary dns :- 192.168.1.1 6) Please try to test your xbox live. Hope it works ...

Connecting XBOX 360 Wirelessly to WRT300N V1.1

If you suffer from a slow connection when using your Xbox 360 usb wireless adapter and the wrt300n router, then fret no more! I called both xbox and linksys and below is what I came up with, which made my connection to Xbox Live work properly. This may even work with other routers as well
Setup for WRT300N V1.1 connected wirelessly to an XBOX 360 USB Wireless Adapter.
Connection Type: High Speed Cable Internet.
Select Setup
Select Basic Setup
Change the MTU setting to manual, edit size to be 1365.
Save
Select Security
Deselect the “Filter Anonymous Internet Requests”
Save
Select Applications & Gaming
Select PortRange Forwarding
For the first port input the following:
Start ~ EndPort: 88 to 88
Protocol: UDP
To IP Address: 100
Check Enable
Application Name: xbox1
For the second port input the following:
Start ~ EndPort: 3074 to 3074
Protocol: Both
To IP Address: 100
Check Enable
Application Name: xbox2
Save
Select Administration
Disable Upnp
Save
This should allow for a smooth connection.

wxman61 wrote:
Thank you for your reply.  However, there is still some confusion on my part.
How does setting up a static IP on the PC help me connect to the Xbox 360 wirelessly?   Please explain.
The static IP Doesn't help you connect wirelessly, it helps you set up port forwarding properly.   So that is step 1
Step 2 would be for you connecting wirelessly, and I am pretty sure the actiontec is already security enabled, so if it is then you would look on the router itself for a silverish sticker that has an ESSID and a WEP KEY   When going through your xbox set up you will have a list of networks to choose from, make sure what you try to connect to matches the ESSID found physically on the router, and then it will ask you for a password or a network key and that is when you put in your WEP key.   That would get you on wirelessly.
the static ip is exclusively for your port forwarding and should only really be used if once your connected to the xbox wirelessly - if it's still having trouble.   that would be when you would set up the port forwarding as I kinda described earlier. so you put in your xbox the static ip address, and then your router will route traffic to and from it based on that ip.   mine didn't need the static ip it would connect wirelessly automatically or via dhcp, but when the network dragged or i got bad performance, that is when I went to port forwarding.

Xbox 360 does not connect to Airport Express wireless network

I'm at my wits ends. I got a my son a wireless adapter for Christmas and for the life of me cannot get it to work. We have looked at all the discussion forums on the internet and did A LOT of trial and error and still to connection. On one occasion the xbox 360 wireless adapter saw the network and once it tried to connect is dropped.
I have a Wii, two windows PC's, a printer and a PowerMac all connected to my wireless router. The xbox and the Airport Express both have the latest firm ware update.
These are some of the things I have noticed and tested:
1. Connection is Cable Modem>Vonage Router>Airport Express....wireless to Xbox360
2. I have taken the vonage router out to go
Cable Modem>Airport Express...wireless to Xbox360 and still no luck.
3. I was suspecting a double NAT and contacted Comcast to see if I could put the cable modem in bridge mode and they couldn't help me.
4. The network is open (no security)
5. The wireless adapter is a steady red...then when I tell it to find the network it drops out (LED turns off)
6. I have tried to see if I have a double NAT but tracing in the network utility does not show anything.
7. I have tried to place the Airport express in bridge mode and when I updated, it doesn't not come back up and I have to do a hard reset to communicate to it again.
8. There was one instance when the wireless adapter LED was green for about 15 secs and when we tried to connect it dropped out completely (no LED light).
9. I know it works because in the various forums I have read that people have it working.
I called xbox support and they were not very helpful...wouldn't even search similar cases...I have tried everything I could think of and I'm lost any assistance is appreciated.
Victor

Tesserax,
What is the make/model of the Comcast-provided modem? How about the Vonage router? Is this router also wireless? Finally, I assume that prior to introducing the AirPort Express Base Station (AX), the modem & Vonage router were working properly ... correct?
Thanks for your interest in helping me. To answer your questions:
1. The comcast make and model for the cable modem is Scientific American Model#DPX2203
2. The vonage router is ethernet hard wired connected between the cable modem and the apple express wireless route. The vonage router is model#VDV21-VD
3. With the exception of the wireless connection between the Xbox 360 and AX; everything works fine.
4. The AX is running Apple firm ware 6.3
In the discussion I have read of similar problems and have tried them all to no avail. I'm sure the is a fix to this problem because of people in the discussion groups have had the same issues. I don't suspect the wireless router because it has a steady red light and only turns off when we do the network test or scan for networks.
Victor

Trouble connecting to my xbox 360 (wrt54gs)

Similar Messages

Maybe you are looking for