Trouble connecting to oki printer

New 13" macbook pro not connecting to OKI data printer. I tried downloading the drivers and still unable to print. Thoughts anyone?

A similar situation--
'Ended up spending 6+ hours with OKI tech support. We tried many many things but in the end could not get my brand new OKI 511dn to print wirelessly when connected using USB via a hub. Tech support concluded that it must have something to do with the way the printer handles PostScript.... Something about Apple wireless products / Bonjour not being able transfer PostScript correctly via USB. So if I had bought a cheaper laser printer (non PostScript) then I should have had no problem--so goes the logic!
In the end, we were able to connect my new printer using LAN (going the IP and not USB route) via Airport.
In the process I ended up buying a 10-meter long USB extension cable which I won't be using, and I had to go out and buy a 15-meter LAN cable to "reroute". I am glad that I'm connected now but it took so so so many hours of trial and error and time on the phone with tech support (not toll-free where I'm located)...I am exhausted!
Bottom line: If you want to connect the latest OKI series color laser printer wirelessly through a USB hub and access it with Bonjour, you might want to go with a lower-end non-PostScript printer. Or, make sure that OKI has an updated driver that is compatible before whipping out your credit card.
I hope that this helps someone.

Similar Messages

Trouble connecting wireless f4580 printer to network

Hi
I have just brought this printer & am having problems connecting it wirelessly. I have a Livebox that Orange sent me.
On screen it says the printer has successfully joined the network. its only when it prints a wireless network test report im having problems. It prints out a page that has the following printed on it
'More than one access point/wireless router has been found that matches your wireless network name (SSID) If this is not intended, your HP printer may connect to the wrong wireless network
If you change your network name, you will need to configure the SSID on all wireless devices to match your new network SSID'
Wireless on - Pass
Wireless working -Pass
Network name (SSID) found - pass
Security - pass
printer settings consistant with wireless router settings - pass
No filtering - FAIL
connected - not run
Other networks found matching your networks name - yes
wireless networks detected - 4
downlink count - 0
Channel - not run
Network name - livebox
Hardware adress (MAC) - f4:ce:xx:xx:xx:xx (have blanked out some as i dont know whether i should have it displayed on a forum as i dont know what the numbers mean, lol)
IP address - not applicable
configuration source - not applicaible
Comunication source - Infastructure
Authentication Type - WPA-PSK
Encryption - Automatic (AES or TKIP)
what am i doing wrong?
Thank you

I think that Orange is a DSL service, right?
Try this:
Sometimes DSL providers have more control over the router than the printer likes.
- Unplug the telephone line from the router
- Turn the power off on the router, wait 30 seconds, then turn the power back on.
- Go through the normal process of connecting the printer to the device.
- Now find the IP address of the printer (it should be on the self-test printout), type it into a browser.
- In screen you will find a Networking Tab, then on the left Wireless, then the IPv4 Tab.
- On this screen you want to set a Manual IP. You need to set an IP address outside the range that the router automatically sets (called the DHCP range). If you know what that is, set an IP outside that range but no higher than 255 (the last number in the address).
- Use 255.255.255.0 for the subnet (unless you know it is different, if so, use that)
- Use the router's IP address for the gateway and the first DNS (leave the second blank).
- Finally, plug in the phone line and test.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

HT3500 Trouble connecting to a printer (On a windows network)

I have a Canon MP600 printer. It has windows computers connected to it, and I have no airport. I'm having a lot of difficulty connecting my macbook air to it. Any suggestions, or helpful tips? It would be greatly appreciated.

thankyou for responding
No i could'nt find it, and then tried adding it manually
More info:
- the mac is connected to the same internet connection that the windows computers are using
- what i've tried doing right now (based on google searches)
system preferences>print & scan> '+' > advanced>
type: windows
Device: another device
URL: smb://WORKGROUP/BILLING/HPLaserjetP1008
Name: HP laserhet p1008
Location:
Print using: choose a driver or print model
so im stuck at finding the correct driver

Trouble connecting/printing to Canon copy machine and printer with iMac

I'm having trouble connecting to/printing off of my new imac, to the network(wireless) printer at work. The printer is a Canon iR advance c5051. When I try printing it keeps giving me a message stating that I did not use the correct password or ID, 15513. It shows up in my computer's printer cue, but does not show up on the actual Canon printer's cue. The print driver has already been installed, so I'm not sure what's going on. Any help/suggestions would be greatly appreciated!
Thanks so much!

I'm having trouble connecting to/printing off of my new imac, to the network(wireless) printer at work. The printer is a Canon iR advance c5051. When I try printing it keeps giving me a message stating that I did not use the correct password or ID, 15513. It shows up in my computer's printer cue, but does not show up on the actual Canon printer's cue. The print driver has already been installed, so I'm not sure what's going on. Any help/suggestions would be greatly appreciated!
Thanks so much!

HT1218 i am having trouble connecting my printer to my macbook air its a kodak wi fi

i am having trouble connecting my printer to my macbook air

Hi, What is your printer ? How do you connect your printer now ? Are they on a SAME network ? Regards.

I am having trouble printing I have a connection to my printer wirelessly but does not print out the correct page I want.When I do print I get a bunch of pages more than is needed and also get a code and symbols please help I am jammed at work

I am having trouble printing I have a connection to my printer wirelessly but does not print out the correct page I want.When I do print I get a bunch of pages more than is needed and also get a code and symbols please help I am jammed at work

This can be the result of selecting the wrong driver. An older, unsupported laser printer will sometimes work with the generic Postscript driver.

Trouble connecting iMac to wireless networked HP printer -- printer not seen in

HP Photosmart Premium 410
Operating System: OS X 10.9
I am trying to connect a new Mac with OSX 10.9.5 to an HP Photosmart Premium c410, which is on an existing home wireless network and functions properly with other (Windows) computers in the house. I am following online instructions to enter the Apple System Preferences>Printers and Scanners>+ menu in order to add the printer, but the printer is not visible. If I use the "print sheet," the HP printer shows as a grayed out option and a message that the printer has been offline for more than a month. Any advice would be greatly appreciated.
Model Name: iMac
Model Identifier: iMac14,2
Processor Name: Intel Core i5
Processor Speed: 3.2 GHz
Number of Processors: 1
Total Number of Cores: 4
L2 Cache (per Core): 256 KB
L3 Cache: 6 MB
Memory: 8 GB

Hi rmikkelsen,
Welcome to the Support Communities!
OS X: Printer and scanner software available for download
http://support.apple.com/kb/HT3669
Apple delivers third-party software for scanners and printers using Software Update. To set up your printer or scanner, just connect it to your Mac. If software is needed and available, OS X automatically downloads and installs it.
This article is a comprehensive list of currently supported printer and scanner models and associated software provided by third-party vendors as of 23 January 2014.
List of printer and scanner software available for OS X
This list is subject to change. This list is updated as new printer or scanner software becomes available, or when a manufacturer discontinues support for a printer or scanner model. Software Update may display software newer than what is listed in this article for a short period of time after each update becomes available.
* = Vendor software recently updated.
+ = Vendor software recently added.
Hewlett-Packard (HP)
Company website 
Software available
HP Photosmart Prem C410 series *
4.2.1
P
S
Your HP Photosmart Premium 410 is on the list of compatible printers. It appears there has been a software update for this model. So, you may want to check HP's website above and see if they have software or drivers that you can download for your printer.
Always try to establish a USB connection with the printer first, then try the wireless option.
OS X Mavericks: Set up a printer
http://support.apple.com/kb/PH14143
OS X: Connecting a Wi-Fi printer to your Wi-Fi network
http://support.apple.com/kb/ht3500
Troubleshooting printer issues in OS X
http://support.apple.com/kb/ts3147
If all else fails, reset the printing system and install the printer again:
OS X Mavericks: Reset the printing system
http://support.apple.com/kb/PH14141
I hope this information helps ....
- Judy

Trouble Connecting Wirelessly to PC Printer

As the subject says, I can't connect to my PC printer. The situation is this:
When the server computer is turned off, the printer is down for the entire network. However, despite the main computer (server) being turned off, I can still access the internet wirelessly.
The problem I'm having is being able to connect to the printer. I have already enabled printer sharing on the PC printer (running Windows XP SP2), but I can't find it anywhere on my MBP. In fact, when I try to add a printer under PRINTER & FAX, the Windows workgroup doesn't appear at all. Does anybody have any suggestions? I figured by this day and age, connecting to a printer on a network wirelessly would be just a few simple clicks of the mouse button...

Let me make sure I understand.
Normally, you print through the server and everything is fine.
You want to be able to print directly to the printer, which is attached to a Windows XP system (How? USB?), so if the server is down, you can continue to print.
In this scenario, is the server normally forwarding the print job to the Windows XP system?
Is this correct?

Trouble connecting to Apple's book and print service

Does anyone know why I can't connect to the printing service. When I'm ready to print my book thru Apple's service I hit the BUY BOOK... key at the botton left and all I see is the blue candy swirl line. I don't even get into the first window of the service where you choose cover colors. I've let the blue swirl run for a long time before I cancel but nothing happens.
-S

Just a thought but could the problem be with your firewall ?
Whenever I've had problems with PC applications connecting to remote servers it's usually turned out to be the firewall blocking the port in use.
Roger

Trouble connecting to a wireless printer

I have a Time Capsule and I just turned on the Guest Account. In order for me to do this I changed the DHCP setting under the Internet tab to change the DHCP Beginning Address to 10.x.x.x. For those using either the 2.4GHz or 5GHz wireless network they have no problems using the HP Officejet Pro 8500 wireless printer since it connects to the either of two available wireless networks.
Further away I have two Mac laptops who cannot access the two wireless networks due to signal strength. I hooked up a AE using an existing ethernet connection. I created a new wireless network and the addresses are in the same range - 10.x.x.x when connected wirelessly but I cannot "see" the HP wireless printer.
Is it possible for the two users connecting to the AE to every "see" the HP wireless printer?
Thank you for looking.

If your printer is already connected to your printer (wifi light = green), click on the link to Manually Add a USB Print Queue, Network Print Queue and Fax Queue on Mac OS X Systems
If the wifi light is orange, just follow the steps when you launch the wireless setup assistant.

Connecting MacBook to printer via wireless network

I have a wireless network via cable modem with some PCs attached and a printer but am having trouble connecting my new MacBook to the HP LaserJet 2100 printer via wireless. I do not have airport express and not sure I need it to have the MacBook print to this printer. Please advise.

Hi topgunner,
How is the printer connected? Are you trying to share it via a PC through wireless? Or is it connected directly to a router/hub that is enabled for printer sharing?

Trouble connecting Windows 2000 PC to Airport Extreme

I'm having trouble connecting a PC running Windows 2000 to my Airport Extreme Base Station. The PC is using a D-Link wireless USB 2.0 adapter (802.11g) to connect to the internet. The PC would connect without problem when I was using a D-Link wireless router but will not connect with the new Apple base station.
In addition to the Windows 2000 PC I have a Windows XP PC (connected via ethernet), an iBook G4 and an Epson printer connected to the Airport Extreme and they all work without a problem.
Can anyone tell me how to solve my problem with the Windows 2000 machine?
Thanks.

I am having the same issue; since you did not seem to receive any replies on this forum, am wondering if you resolved the problem; am also wondering if my issue is the distance from my Airport Extreme base to the Windows PC. My next step is going to be to try moving the Apple router closer to the Windows PC and see if that Linksys wireless picks up the signal.

Trouble connecting kodak 3.2 to mac lion, trouble connecting kodak 3.2 to mac lion, trouble connecting kodak 3.2 to mac lion, trouble connecting kodak 3.2 to mac lion

Hi there,
I'm having trouble connecting a Kodak 3.2 printer to my Mac (Lion OS 10.7.4) - I've tried it on Wifi but no success and the same with usb. The mac is saying Printer not responding.
I've followed troubleshoot on the kodak support site and also done the usual uninstall - reinstall but to no avail. Any help would be appreciated.

The first question would be if it works while directly plugged in to the machine rather than on Wifi.

I'm having trouble connecting Brother DCP197c to Mac Mini - it worked before Yosemite

I'm having trouble connecting Brother DCP197c to Mac Mini - it worked before Yosemite.
I have downloaded drivers from Brother
I have tried searching for the printer once the drivers have been installed, but nothing...
Not sure what else to do - any helpful suggestions are welcome.
Thank you

I tried the Reset Printer option - it didn't work at first but then I decided to download the drivers again... and now all is fine and dandy.
Thanks for your help

RE connecting my wireless printer

Hi Guys
I have used my HP Desljet 3050A for years, both by cable and wirelessly, but mainly wirelessly.
I recently had a problem concerning an error message telling me my printer was in error state.
I solved that problem by deleting my printer from pc, downloaded new drivers, and now I can print ok using usb, but having trouble connecting wirelessly.
I would welcome help, but can I suggest you tell me how in simple terms otherwise it confuses.

Hi @frenchman96,
Welcome back to the HP Support Forums! I see you are not able to print wirelessly to your HP Deskjet 3050a, the printer was in an error state which required you to uninstall and reinstall the software and drivers and since then the wireless connection has been lost. You are still able to print to the DJ 3050A with a direct connection. (USB)
From the front panel of the DJ 3050A:
Setup Menu > Wireless > Settings > Restore Defaults
Now let's go to the Computer:
1. Unplug the USB.
2. Remove the HP 3050A software from your computers Control Panel's Uninstall a program option.
3. Restart the computer.
4. Make sure all the DJ 3050A software is gone from the programs list as well as your HP folder listed under the All programs in your Start Menu.
5. Now go ahead and run the HP Printer Install Wizard for Windows it was created to help Windows 7, Windows 8, and Windows 8.1 users download and install the latest and most appropriate HP software solution for their HP Printer.
**NOTE: Remember to select the USB to Wireless conversion, DO NOT plug in the USB until prompted, the on screen instructions will tell you when you need to remove the USB
6. Go ahead and print a test page.
7. If you are unable to print a test page, please run the HP Print and Scan Doctor- It was designed by HP to provide users with the troubleshooting and problem solving features needed to resolve many common problems experienced with HP print and scan products connected to Windows-based computers.
Please let me know if this was successful! I will watch for your reply.
Thank you,
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Trouble connecting to oki printer

Similar Messages

Maybe you are looking for