Trouble connecting USB6211 through USB Extender

Hi Everyone,
I am trying to connect USB 6211 to my computer using USB 2.0 Extender Over Cat5 (From TRIPP-LITE). However, it is not recognising the device. Everytime I try to connect,it says, the 'USB frmware loader' failed to install properly. The hub by itself works when I connect usb memory stick to it. I have Daqmx 9.5.5 installed on the computer.
Has anyone faced any similar issue? I would really appreciate any help in this regard.
Thanks!
Kudos are (always) welcome for the good post. :-)

Hello odessy27,
Will your computer recognize the device without the extender? Make sure it is working properly before trying to extend its range.
At this time, I do not believe there is a recommended USB conversion or extension device. It is possible the device you are trying to use is simply incompatible with the NI USB-6211 I found quite a few threads on the forums expressing difficulties in similar situations. Here are a few of the more useful ones:
http://forums.ni.com/t5/Multifunction-DAQ/Does-NI-offer-USB-extension-solutions/m-p/381873?requireLo...
http://forums.ni.com/t5/Multifunction-DAQ/USB-extension-cable-too-much/td-p/768444
http://www.ni.com/white-paper/4473/
One thread in particular mentioned this product had worked for them in the past: http://www.digi.com/products/usb/anywhereusb
What are you trying to accomplish with your USB converter? Are you simply trying to extend the cord of your USB device, or do you wish to network the device in some manner?
Patrick
CLA

Similar Messages

HT1386 i updated itunes 11.1 yesterday and now im trying to get my music on itunes to sync onto my iphone 4s but when i connect it through usb...Itunes is saying " waiting for changes to be applied"?

i updated itunes 11.1 yesterday and now im trying to get my music on itunes to sync onto my iphone 4s but when i connect it through usb...Itunes is saying " waiting for changes to be applied"? so i dont know what to do cause i just want to sync my music from itunes to my iphone 4s

I had the same problem and the fix was so easy that I felt a little silly after spending 2 hours with an Apple Technician. At the end of it all, what I had to do was make sure ALL music was deleted from my iPhone 5 by going into usage and clearing out the music folder. All I had to do then was turn my phone off and turn it back on again. I had not done this after my phone upgraded to the new 7.0 IOS. What's the first thing you do when experiencing computer problems? Reboot! It fixed my problem and now my iPhone 5 synchs perfectly when I had it connected to my computer. I am also on iTunes version 11.1.

Trouble connecting to external USB hard disk through PC

I've had AirPort Extreme 802.11n for a few months which I use to connect to a printer and to share a USB hard disk between my eMac and my thinkpad. For a while everything was working beautifully. The disk showed up on my eMac desktop and in my Windows XP file explorer. Then recently the USB disk stopped connecting at all to either computer even after trying the old remedy of connecting directly to my Mac, dismounting it, and reconnecting. Then today a bunch of updates for the AirPort Utility became available and after updating to 5.3.1 on my eMac the disk shows up on my eMac again. But on my PC here's the situation: the disk appears in the AirPort Utility for Windows (5.3.1) but I can't find it in Windows file explorer. I tried the alternative ways of connecting shown here:
http://docs.info.apple.com/article.html?artnum=306119
but no dice.

Uhmmmmmm, you meant to say the Macbook Air DOES have (2) USB PORTS
GENEDI, yes, you can connect a 2.5" USB external HD to your Mac AIR, ...... done it a 1000 times

Connecting iPhone through USB hub

I have a weird problem. When I connect the iPhone through a USB hub, nothing happens. It doesn't synchronize, it doesn't charge. When I connect the iPhone directly to the computer, with the same cable, it works as supposed.
The weird thing is, I have been connecting the iPhone successfully through this (powered) hub for half a year. But suddenly it doesn't work. Everything else connected through the hub works fine.

You're going to want a USB hub that comes with an AC adapter: the iPhone will draw as much power from the port as it reasonably can, and prefers up to 1 A (USB spec is 500 mA) at 12 V to charge as quick as possible. This tends to lead to undervolt situations on the bus when other devices suddenly draw more (a mouse wakes up, a HD spins up, et cetera).
I use my iPhone 3G with a dock on a USB hub that's powered, and have had minimal issues. This isn't an endorsement, just FYI.

HT1414 my ipod touch does not appear when i connect it through usb cable. how do I connect?

When i connect my ipod touch via usb cable it does not appear in itunes. The screen is frozen with a picture of itunes an arrow and a ubs cable. What does this mean?

Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes.
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
Next try:
iOS: Device not recognized in iTunes for Windows

Switch wireless drive to connected directly through USB

Hello, hoping someone has a clue as to how to accomplish this:
I have a USB drive which I connected to my iMac and shared wirelessly to backup my MacBook Pro.
After several weeks of pain I decided to connect the drive directly to the MacBook.
TM will not recognize it. There is a MacBookPro.sparsebundle image in the drive that if I double click will mount the drive that the MacBook used to backup.
Great! I can even see my older backups there, half the battle won.
The problem: I can't get TM to recognize this disc as the one it was backing to before, even though it allows me to go into TM to recover backups!!!
Is there a way to get TM to recognize this disc and use to to continue backing up and not have to create a whole new backup branch?
Thanks.

sixschlitzes wrote:
Does anybody know if this is possible (i.e. will the TC back up an external hard drive that is permanently attached to it,
No, sorry, Time Machine cannot back up from a network location.
Does anybody have other suggestions (without having to buy any more gear) for storage/back-up that don't require that I plug that external HD to a computer every time I want to access the data?
The 3rd-party apps CarbonCopyCloner and ChronoSync (and probably others) can back up from a network location.

Any hopes for isync 3.0 connect 5310 through usb?

bluetooth is darn slow >!!

Depends how you define "slow" and what other factors you consider...
I find USB syncing much slower overall, when taking into account the time taken in locating the cable (its never where I left it!), plugging the cable into a free USB port (if one is free), plugging the other end of the cable into the phone, switching the phone into USB mode, waiting for the Mac to 'see' it, then clicking 'Sync'. Then, after waiting for it to sync (quickly!) removing the cable, and waiting for the phone to go back to 'normal' mode before I can use it.
With Bluetooth I just turn it on (3 button presses on the phone) and click 'Sync' on the Mac and walk away with my phone in my pocket while its still syncing. You can't do that with USB!

Problem in connecting my phone USB

I have problem in connecting my USB cable.My display shows "Memory card is in use by another application" always when I connect it through USB Cable.I cannot open my memory card.Please help me what might be the problem.
Thanks in advance.
Solved!
Go to Solution.

Just purchase 3 Lumina 822 Windows phone under Verizon. 2 of the phones have the following problem, the 3rd operates fine.
Connecting to any laptop, have tried several Windows 7 and Windows 8 laptops, the phone is shown in the file manager tree as "Windows Phone", but nothing showing underneath. Spoke with Verizon support, tried soft reset - no change. Then tried hard reset, after reset, the laptop can see all the folders under the phone, i.e. photos, videos, documents, etc...., but all folders are empty underneath, even though there are files in these folders. Disconnecting and reconnecting the usb cable results in the folders going away. If I try to copy/paste a file into the phone directory, he complains with "Cannot copy item, The device has either stopped responding or has been disconnected" even though the cable is connected.
Verizon contacted Nokia, no bulletins out on this issues, even though I have 2 of 3 phones with same symptoms. Told to return to Verizon for a new phone.
I have a strong, compelling reason to stay with Windows phones and I'd REALLY like to have some confidence that the next phone will work, but am hesitant to a) pick up 2 new Nokia Lumina 822s and b) keep the 3rd working phone, in fear of the same symptoms occuring. The main reason for staying Windows is I've gone Windows 8 on a couple new HP Envy X2s and would like a seamless setup and sharing.
Please tell me that I'm not the first one to experience this issue, or you will work directly with me to help resolve. Let's face it, not being able to connect through USB is a showstopper, kinda self-defeating to seamless isn't it? I've invested now into Nokia, I hope you will invest the time with me.
Verizon's only other option currently, is the HTC Windows phone.
Please help soon.
Eric

I tried for update but when i saw the screen its showing an arrow with a USB cable towards itunes icon, and now i'm not able to do anything, i also tried to connect ipad through my laptop but no use

i tried for update but when i saw the screen its showing an arrow with a USB cable towards itunes icon, and now i'm not able to do anything, i also tried to connect ipad through my laptop but no use

That message means that you have to restore the iPad now. There was a problem with the update. So connect the iPad to your computer and restore your iPad.
You can read bout it here.
http://support.apple.com/kb/ht1414
If that does not work you will need recovery mode. You can read about it here.
http://support.apple.com/kb/ht4097
Or you can follow these Recovery Mode Instructions
Disconnect the USB cable from the iPad, but leave the other end of the cable connected to your computer's USB port.
Turn off iPad: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for iPad to turn off.
If you cannot turn off iPad using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the iPad turns off, release the Sleep/Wake and Home buttons.
While pressing and holding the Home button, reconnect the USB cable to iPad. When you reconnect the USB cable, iPad should power on.
Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears you can release the Home button.
If necessary, open iTunes. You should see the recovery mode alert that iTunes has detected an iPad in recovery mode.
Use iTunes to restore iPad.

I've got a wireless network with one iMac and a Vista PC, on the Vista PC is through USB a printer connected. How can i print from my iMac to that particular printer ?

I've got a wireless network with one iMac and a Vista PC, on the Vista PC is through USB a printer connected. How can i print from my iMac to that particular printer ?

You need to turn on Printer Sharing on both the PC and OS X. I can't help you on Vista but in OS X it's System Preferences - Sharing - check the Printer Sharing box.

How do you access files from an external harddrive connected to TC through USB from iPad or windows computer?

How do you access external hard drive data that is connected to TimeCapsule through USB from iPad or knows based computer?

Filebrowser for the iPad does this very well.
FileBrowser - Access files on remote computers for iPhone, iPod ...
Cannot help on Windows, but another PC guy might be able to answer. Some possible clues here:
http://support.apple.com/kb/HT1331

I need to scan wirelessly from a MAC (OS 1.7 or higher) through Adobe Acrobat Pro X (or higher). Have discovered that all in one printers say they are MAC compatible but will only scan when connected with a USB cable. Would prefer a laser, color, all in

I need to scan wirelessly from a MAC (OS 1.7 or higher) through Adobe Acrobat Pro X (or higher). Have discovered that all in one printers say they are MAC compatible but will only scan when connected with a USB cable. Would prefer a laser, color, all in one. Does anyone have printer suggestions that you know will scan wirelessly?

Great information.
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

I used the article "How to connect Sony Tablet with adb protocol through USB?" Article ID:474705. E

I used the article "How to connect Sony Tablet with adb protocol through USB?" Article ID:474705.
Everytime I restart the computer now I get a open with window.
When I select Notepad and open it I get
0x54c Noswal\.android\adb_usb.******
How do i undo that.
If it helps the Article ID:474705 this says at one point
3. Open a shell prompt and enter the following command: echo "0x54c" >> $HOME/.android/adb_usb.******.
I gues that's what's creating the problem.
Please help.

Hi elishacuthbert.
Try disabling the start-up items in your computer to troubleshoot the issue. Follow the steps mentioned below:
Right click on the Taskbar > Task Manager > Start-up > Select the applications > Disable.
Note: If my post answers your question, please mark it as an "Accepted Solution."

TS1373 how can i connect my iphone to computer through usb using windows 8?

how can i connect my iphone to computer through usb using windows 8?

If iTunes is installed, you just connect the iPhone to USB.
http://support.apple.com/kb/HT1386
You can also sync to iTunes using WiFi.

How to connect to a usb cam through acrobat api??

I have deveopled a plugin for acrobat...and want to initiate a usb cam through my plugin...is there any method available in the api to detect or connect to a usb cam????If yes please explain how to do so...

...is there any method available in the api to detect or connect to a usb cam????
No. You may look at the apis of your operating system.

Trouble connecting USB6211 through USB Extender

Similar Messages

Maybe you are looking for