Trouble connecting via WiFi
I have successfully connected to my home WiFi previously and now it will not connect. Any thoughts on how to resolve? I have made sure that other devices are connecting. Both my IPad2 and IPhone4s are not.
Have you tried connecting to other networks? When you click on the airport icon are there other networks available? If so try them.
Similar Messages
-
The internet just not work fine with the websites after a while. If I connect the ethernet cable, everything works perfect. I tried Safari, Firefox and Chrome. It happened with all of them.
-
I am having trouble connecting to wifi network via airport express on my windows xp pc, but I know it is working because I can connect on my macbook, does anyone know what the problem is?
Tell us more about the problem, I can think up 100&1 different reasons, but don't have time to go through all the possibilities. So.. what happens?
-
Greetings!
I've been having troubles downloading HD movie files with iTunes 9.0.2. An other content downloads fine after purchase. Problems come when trying to download any file larger than 2 gig or so.
An Apple expert tells me that the problem is that the PC running iTunes is connected via wifi. Unfortunately, moving the machine or router is not a simple option.
So wondering if anyone out there is downloading HD content via wifi and having any issues, or doing fine?
BTW, I use AppleTV to watch the content from the PC, a connection made via the wifi router without issue.
Thanks!Works fine for me. I'm using an 8-yr-old Linksys router on 802.11b, set to a channel that doesn't interfere so much with the neighbors.
If this is a new router, check to see if the manufacturer has any firmware updates. -
I'm able to connect via wifi but not via ethernet
I have a iMac, Mac OS X v10.7.5, and recently had a problem connecting to internet. I can connect via wifi, but when I try connecting via ethernet it's not working. When I go to the preferences > network, it shows "green" / connected for ethernet but when I open up Safari or Firefox, it doesn't show a connection to the internet.
Hi, this has worked for a few...
Make a New Location, Using network locations in Mac OS X ...
http://support.apple.com/kb/HT2712
old... http://docs.info.apple.com/article.html?artnum=106653
Hi, this has worked for a few...
Though all of these steps may or may not be needed, I'm including them all.
Make a New Location, Using network locations in Mac OS X ...
http://support.apple.com/kb/HT2712
10.5, 10.6, 10.7 & 10.8…
System Preferences>Network, top of window>Locations>Edit Locations, little plus icon, give it a name.
10.5.x/10.6.x/10.7.x/10.8.x instructions...
System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
The interface that connects to the Internet should be dragged to the top of the list.
If using Wifi/Airport...
Instead of joining your Network from the list, click the WiFi icon at the top, and click join other network. Fill in everything as needed.
For 10.5/10.6/10.7/10.8, System Preferences>Network, unlock the lock if need be, highlight the Interface you use to connect to Internet, click on the advanced button, click on the DNS tab, click on the little plus icon, then add these numbers...
208.67.222.222
208.67.220.220
(There may be better or faster DNS numbers in your area, but these should be a good test).
Click OK.
10.5/10.6 instructions, System Preferences>choose interface>Advanced>Proxies Tab, make sure none are set, like for HTTP & HTTPS. -
Can I share my internet connection via wifi AND use my wireless printer at the same time?
Not completely familiar with wifi capabilities. I have this new setup in my office. I want to share my iMac internet connection via wifi so I can text and check emails using my iPhone (no cell service inside the building). Which works fine. However, I now cannot print wirelessly to my HP printer (LaserJet Pro 400 color). Once Internet sharing is off, I can print just fine. Any other wireless options, or just go get a long USB cable?
Hi,
It is not a multitasking printer, other devices may keep it therefore the best option in this case: connect it to your wireless router and all devices which are conntected to this router can sahre the printer.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem. -
Just changed modems, can connect via wifi to surf the net, but can't connect via wifi to update aps in iTunes store
OK thanks, I thought that maybe some of the iphone 3s were not able to connect to Wifi,
-
Just bought new iPod touch. When I connect to computer to sync it tells me "iTunes could not connect to this iPod touch. Could not send a message to device." Not sure if it is b/c of an older version of iTunes but connecting via wifi sync unacceptable
What version of iTunes is on the computer? You need at least 11.4.
-
HT1695 i am having trouble connecting to wifi on my i phone i have cellular service with at&t
I am having trouble connecting to wifi on my I-PHONE,I have at&t as my service
Did you already try to reset the router?
Did you reset the iPod by holding the sleep and home button until the Apple logo comes back again?
Did you reset the network settings on your iPod in Settings/General/Reset?
More tips here: iOS: Troubleshooting Wi-Fi networks and connections -
HT5569 I am having trouble connecting to wifi can you help.
I am having trouble connecting to wifi can you help.
connectng with a pin # will not work with the ipad. you need to find out exactly what the actual wifi password is.
pin and push buttons are used by wifi protected setup. which is an optional feture of WPA
here are some ideas
go to the routers home page (typically 192.168.1.1 or 192.168.1.254) and see if you can click on "show password"
get the manual out, it should have the default user name and password you may need to access the routers page
if your windows computer connects, then you should be able to right click the wifi connection and click on show password as well. this is somewhere in the properties page of the wifi connection
also with windows its a good idea to click on "save wifi connection to usb drive" this can be used to connect other windows computers and xbox game consoles as well
if your laptop computer is a mac book you can go to the keychain or icloud keycahin and reveal the actual passowrd as well.
look at the actual router it might have directions on a sticker on how to access the routers configuration pages
if you enter the wrong password on the ipad you need to forget the network and try again -
My ipod touch (4th G) only connects via wifi, not via cable. The cable works with my iPad, so it's not that. Help?
1. Turn the router, iPad and printer off.
2. Turn on the router and then wait 30 seconds to let it complete its start-up process.
3. Turn on printer and then wait 30 seconds to let it complete its start-up process.
4. Turn on your iPad and test print. -
I have an Appl,e AirPort Extreme Base Station (Simultaneous Dual_Band( MC340LL/A. After updating the software, no devices can connect via wifi.
As suggested in another discussion area, (AirPort), I reset the AEBS to factory defaults. On the TV, I went to >Settings>General>Network>Configure Wireless>Wireless Networks. I could then see the generic "Apple Network xxxxx" on the TV. From my MacBookPro, I verified that I could connect to the TV by launching iTunes and noting that the TV was now visible in the "Devices" menu. Went back to the AEBS and ran through the "Setup" routine. I did NOT use the "Previous Settings" but instead, saved the old settings profile, created a new wireless network and new settings profile and enabled WPA2 Personal encryption. I then went back to the TV and went through the "Settings" routine again (as noted above). This time, after entering my WPA2 password, the TV connected to the network and problem was solved. Thanks.
-
Can not find air printer - using epson wf 3520 connected via wifi
Hardware: macbook air
Software: Osx 10.9.5
Epson printer wf3520 connected via wifi is working - latest printer software installed
-when trying to add an air printer sometimes its showing up under bonjour - usually its not showing as available printer
-when it is installed and I try to print I get the message "printer not connected"
Any help how to install it correctly?Hi wolfgangfromhildesheim,
If you've gone through the article that Allen provided, have gotten through to the step where you reset your printing system, and the issue persists, then the next step in the article is for you to contact the printer manufacturer for further assistance.
If you're unable to print
Check these things if you are unable to print, or if you see the message "No AirPrint Printers Found."
Make sure your printer has paper, and enough ink or toner installed.
Make sure your printer is connected to the same Wi-Fi network as your iOS device.
Make sure your printer has power and is turned on. Try turning your printer off and then back on again to see if it resolves your issue.
Check to see if your printer has any error lights or indicators displayed on the printer's control panel. Check the documentation that came with your printer to clear any errors displayed.
Check with your printer's manufacturer to see if any firmware updates are available for your printer. Check your printer's documentation or contact the printer vendor for more information. A firmware update may be available, even if you just bought your printer.
About AirPrint - Apple Support
Take care,
Alex H. -
When i wake up my iMac from sleep my wifi is disconnected. It also disconnects my iPad, my wives iPad, my iPhone & Sky On Demand which is connected via wifi. To reconnect all devices i have to switch off & then on again wifi on the iMac. Can anyone help?
Had the same issue and finally solved it. After the upgrade to Mavericks our 2 new Macbook Airs stopped connecting automatically to Wifi while the older machines the kids had still worked fine.
Bought a new airport extreme and problem solved. Our Airport Extreme was about 5 years old and was probably not compatible with the new OSX.
BTW this was after trying everything people suggested on this forum and a 4 hour marathon tech support call with Apple where we reinstalled the OSX.
***** to need to spend $200 but glad the problem got solved.
New extreme is also mega fast so its all good. -
Airport Extreme connected via wifi -- will remote MobileMe still work?
I have two Macs: a desktop and a laptop. I have the latest software and I have MobileMe. My internet is physically connected to the desktop computer. The laptop is connected via wifi using a non-Apple router.
According to Apple's website concerning the AirPort Extreme, "Say you’re traveling and you need a file on the hard drive connected to your AirPort Extreme back at home. If you’re a MobileMe member using Mac OS X Leopard or Snow Leopard, no problem. You can access all the files on your shared drive over the Internet."
My question is this: if I attach an Airport Extreme to the laptop -- which is connected via wifi to the network -- will I still be able to access the attached hard drive via MobileMe while traveling, or does this work only if the Airport Extreme is directly wired to the internet?
Thanks.Thanks, very helpful.
Say it loud, this is one of the best things of Airport, you control the volume even with the optical output:
¿However, why I can´t do the same with the optical output of my 2008 Mac Mini?
Each one (Mac mini 2008 and Airport Express 2008) have optical link to both receivers (Denon AVR3805 and Denon AVR1905).
But I must control the volume of the mac mini with the remote of the AVR3805.
It seems Airplay makes some magic, but straight driver of OSX over audio device don´t.
What a PIA (Pain in the ***). They can put Gigabits of audio information in the optical link but they can´t add a layer adding a header of some bytes to the packets, adressed to a smart DAC than can control the analog output with two bytes of information.
IEEE, ¿Will you make a layer specification for smart DACs? Life and devices use would be much simpler.
Apple in the meantime makes the magic he is able with Airplay.
Some day.
Maybe you are looking for
-
The first error message is: itunes.exe-System Error: the program can't start because MSVCR80.dll is missing from your computer. Try reinstalling the program to fix the problem. The second error message says: itunes: itunes was not installed correct
-
I've been trying to change my feed url by adding the specified iTunes xml "new feed" tag at the channel level, but no matter where I put it, it invalidates the feed. This is my current feed: http://www.ultimathule.info/xml/UltimaThule_AmbientMusic.xm
-
Parameter type in stored procedure call
What is the best way using ODP.net to reference the parameter type? I have several stored procedure in a Oracle 9i database. The database looks like: Name Null? Type FLTID NOT NULL NUMBER(10) PLANEID NOT NULL VARCHAR2(3) The call in my VB.net app is:
-
OTA-HTTP-SEND-1005 Error while sending to destination B2B
Hi, While sending ebxml message to destination B2B, we are getting error as Message Transmission Transport Exception Transport Error Code is OTA-HTTP-SEND-1005 StackTrace oracle.tip.transport.TransportException: [IPT_HttpSendConnectionRefused] HTTP c
-
INSERT in the custom database table to create a new entry.
Hello Experts, I'm trying to INSERT the entry in my custom databse table that i have created. But I'm not sure what i'm missing as i'm getting the sy-subrc = 4 after the INSERT statement and my records are not added to the database table. I'm using t