Trouble Connecting with Windows Partition

Hi all,
I'm having trouble figuring out how to connect to my windows partition on my MacBook from my Desktop. I've obviously set things up incorrectly, but I can't seem to find the proper information to do it right.
On my Macbook, I have two partitions, one for OS 10.5, one for Windows XP. When I go to the NETWORK pane, it shows "Library," Mac001B631E2161," "MacBook," and "Servers." I can connect to the Macbook just fine. When I try to connect with "Mac...." it gives me a SMB/CIFS File System Authentication" dialog box, asking to enter the workgroup or domain name and my user name and password. I enter in "workgroup" and my user name and password, and it tells me it "could not be opened, because the original item cannot be found." And if I try to Delete Alias," it says the operation cannot be completed because I don't have sufficient privileges.
Any advice appreciated.
Thanks,
Mark

Hi,
Have you installed the certificate on the client computer? If you designate a certificate that is not installed on client computers, authentication will fail. For more detailed information about EAP, you can view the link blow.
Extensible Authentication Protocol (EAP) Settings for Network Access
http://technet.microsoft.com/en-us/library/hh945104.aspx
Hope this helps.
Steven Lee
TechNet Community Support

Similar Messages

My ipod nano (2nd generation) will cont connect with windows or itunes, windows says it has had reported errors??? any help? havnt used ipod in over a week and now it wont work with my computer

my ipod nano (2nd generation) wont connect with windows or itunes, i used it last week (charged it through USB) then this week when i connect it (once again through USB) it wont work, it says "windows has stopped this device because it has reported problems" any help? ive made sure my itunes is up to date, done a reboot on my computer and ipod and still nothing..help please

This could either be a conflict with the iPod's docking port, the iPod's USB sync cable, or even the USB port you are plugging the iPod into on your PC. So the first thing I would try and do is plug the iPod into a different USB port on your PC. Make sure it's a high powered USB 2.0 port as they provide a higher power throughput than older USB ports or even the ones that are sometimes available on the front of the tower.
It might help to disconnected all other USB devices from the PC (minus the keyboard and mouse) and reboot the PC. Then reconnect the iPod once again.
If still no luck, swap out the cable with another known working cable to rule out the possibility of a damaged or faulty cable.
Lastly, plug the iPod into another PC to see if it's recognized there. If the same error appears on another machine, it's likely a hardware issue with the Nano meaning you'll want to have it serviced or replaced.
B-rock

TS1369 why doesnt my 5th gen ipod nano not connect with windows 8?

why doesnt my 5th gen ipod nano not connect with windows 8?

Doublechecking. Have you also tried a complete uninstall of both iTunes and all the other related software components and then a reinstall? If not, try the instructions from the following document:
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8

How to make SAP B1 connection with Windows Sharepoint Service 3.0

how to make SAP B1 connection with Windows Sharepoint Service 3.0 through asp.net web part code.. I get the security error when i run that web part......
public bool ConnectToCompany()
            oCompany = new SAPbobsCOM.Company();
            oCompany.Server = "192.168.1.58";
            oCompany.DbServerType = SAPbobsCOM.BoDataServerTypes.dst_MSSQL2005;
            oCompany.CompanyDB = "SBODemoUS";
            oCompany.DbUserName = "sa";
            oCompany.DbPassword = "abc";
            //oCompany.UseTrusted = true;
            oCompany.UserName = "manager";
            oCompany.Password = "manager";
            oCompany.language = SAPbobsCOM.BoSuppLangs.ln_English;
            oCompany.LicenseServer = "192.168.1.58:30000";
            int i = oCompany.Connect();
            if (i != 0)
                return false;
            return true;
protected override void RenderContents(HtmlTextWriter writer)
            if (conn.ConnectToCompany() == true)
                writer.Write("Hello" + this.Context.User.Identity.Name);
Edited by: bikalg on Nov 28, 2010 9:43 AM

Hi.......
Welcome to SAP Business One Forum.....
Unfortunately this is the wrong forum you posted here.
I would suggest you post it in SDK or System Administration Forum and definitely you get the solution and close this thread from here......
Regards,
Rahul

ISight - connects with windows users no problem?

I'd like to buy this webcam, but I heard it has problems connecting with windows users. Will I be able to talk to people on it through AIM? Thats what I'd like, if not, I probably wont get it. Anyone have any personal experience or have any answers or helpful tips - I'd appreciate anything - thanks.

It is not the iSight itself that gives you the impression that connecting with Micros~1 Windows users causes problems ... it is the availability of (cross platform) applications that makes connecting a bit more cumbersome.
I have PowerMac G5 with iSight and I connect with my Micros~1 Windows platform family equiped with and without USB webcam.
The challenge will be to find messaging / VoiP applications with bearable audio quality and reasonable video performance.
I started with Skype for Voice and Yahoo! messenger for bad video ( 1-2 fps and video size 320 x 240).
Skype has a video plugin (only for Windows)
Yahoo! Messenger does not have voice yet (2.5.3)
MSN is badmouthing because of the "M"
I have used iChat with another Apple believer ... and the quality of Voice and Video is unparralled.
The best two alternatives I found are:
a) AIM 5.9
b) Trillian (www.trillian.cc)
Both use a free AIM screen name.
AIM works fine, see also EZJim pages.
TrillianPro 3.1 reuses AIM screen names ... and ... it has both good audio and zoom-to-full-screen-video size with fps rates filling your bandwidth.
The only negative on Trillian so far, the "handshake" for connecting two people takes some time.
TrillianBase is free but has no Video capabilities. The Pro version is 25$.
Regards Coen
ps. if you want to test your setup use my AIM screenname: coenjeukens

X201 thinkpad won't connect with windows updates

hello,
my 6-month-old lenovo thinkpad x201 will not connect with windows updates via firefox 3.6.13 or internet explorer 7.
Machine model # CTO; Machine type # 3249 Windows XP Pro, Service Pack 3 .
i would appreciate assistance.
thanks.

how about updating to internet explorer 8?
or firefox 4?
getting microsoft updates will probably work better with internet explorer 8 though?
T430u, x301, x200T, x61T, x61, x32, x41T, x40, U160, ThinkPad Tablet 1838-22R, Z500 touch, Yoga Tab 2 Windows 8.1, Yoga Tablet 3 Pro
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
If someone helped you today, pay it forward. Help Someone Else!
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

ORA-03135 connecting with Windows 7 via VPN

Can you please help me.
I am unable to connect with Windows 7 clients (x32 also x64) to a database 10.2.0.5 running on a Windows 2008 R2 x64 Server
Oracle Client Version: 10.2.0.3
always raises an ORA-03135 error!!!
But with a Windows XP Clients (same Oracle Client Settings) its working without problems. No connections problems!
We use a SonicWall Firewall where all Traffic (SQLNET,..) is allowed for testing!
CLIENT: SQL.NET ora
SQLNET.AUTHENTICATION_SERVICES= (NONE)
NAMES.DIRECTORY_PATH= (TNSNAMES)
SERVER: SQL.NET ora
SQLNET.AUTHENTICATION_SERVICES= (NONE)
NAMES.DIRECTORY_PATH= (TNSNAMES)
Some Trace Infos:
Oracle Client:
(1256) [25-NOV-2010 11:23:38:997] ntt2err: entry
(1256) [25-NOV-2010 11:23:38:997] ntt2err: soc 1992 error - operation=5, ntresnt[0]=517, ntresnt[1]=54, ntresnt[2]=0
(1256) [25-NOV-2010 11:23:38:997] ntt2err: exit
(1256) [25-NOV-2010 11:23:38:997] nttrd: exit
(1256) [25-NOV-2010 11:23:38:997] nsprecv: error exit
(1256) [25-NOV-2010 11:23:38:997] nserror: entry
(1256) [25-NOV-2010 11:23:38:997] nserror: nsres: id=0, op=68, ns=12547, ns2=12560; nt[0]=517, nt[1]=54, nt[2]=0; ora[0]=0, ora[1]=0, ora[2]=0
(1256) [25-NOV-2010 11:23:38:997] nsrdr: error exit
(1256) [25-NOV-2010 11:23:38:997] snsbitts_ts: entry
(1256) [25-NOV-2010 11:23:38:997] snsbitts_ts: acquired the bit
(1256) [25-NOV-2010 11:23:38:997] snsbitts_ts: normal exit
(1256) [25-NOV-2010 11:23:38:998] snsbitcl_ts: entry
(1256) [25-NOV-2010 11:23:38:998] snsbitcl_ts: normal exit
(1256) [25-NOV-2010 11:23:38:998] snsbitts_ts: entry
(1256) [25-NOV-2010 11:23:38:998] snsbitts_ts: acquired the bit
(1256) [25-NOV-2010 11:23:38:998] snsbitts_ts: normal exit
(1256) [25-NOV-2010 11:23:38:998] nsdo: nsctxrnk=0
(1256) [25-NOV-2010 11:23:38:998] snsbitcl_ts: entry
(1256) [25-NOV-2010 11:23:38:998] snsbitcl_ts: normal exit
(1256) [25-NOV-2010 11:23:38:998] nsdo: error exit
(1256) [25-NOV-2010 11:23:38:998] nioqrc: wanted 1 got 0, type 0
(1256) [25-NOV-2010 11:23:38:998] nioqper: error from nioqrc
(1256) [25-NOV-2010 11:23:38:998] nioqper: ns main err code: 12547
(1256) [25-NOV-2010 11:23:38:998] nioqper: ns (2) err code: 12560
(1256) [25-NOV-2010 11:23:38:998] nioqper: nt main err code: 517
(1256) [25-NOV-2010 11:23:38:998] nioqper: nt (2) err code: 54
(1256) [25-NOV-2010 11:23:38:998] nioqper: nt OS err code: 0
(1256) [25-NOV-2010 11:23:38:998] nioqer: entry
(1256) [25-NOV-2010 11:23:38:998] nioqer: incoming err = 12151
(1256) [25-NOV-2010 11:23:38:998] nioqce: entry
(1256) [25-NOV-2010 11:23:38:998] nioqce: exit
(1256) [25-NOV-2010 11:23:38:998] nioqer: returning err = 3135
(1256) [25-NOV-2010 11:23:38:998] nioqer: exit
(1256) [25-NOV-2010 11:23:38:998] nioqrc: exit
(1256) [25-NOV-2010 11:23:38:998] nioqds: entry
(1256) [25-NOV-2010 11:23:38:998] nioqds: disconnecting...
(1256) [25-NOV-2010 11:23:38:999] nsclose: entry
Server Traces:
nttrd: socket 4172 had bytes read=0
nttrd: exit
nsprecv: error exit
nserror: entry
nserror: nsres: id=0, op=68, ns=12535, ns2=12560; nt[0]=505, nt[1]=60, nt[2]=0; ora[0]=0, ora[1]=0, ora[2]=0
nsrdr: error exit
nsdo: nsctxrnk=0
nsdo: error exit
nioqrc: wanted 1 got 0, type 0
nioqper: error from nioqrc
nioqper: ns main err code: 12535
nioqper: ns (2) err code: 12560
nioqper: nt main err code: 505
nioqper: nt (2) err code: 60
nioqper: nt OS err code: 0
nioqer: entry
nioqer: incoming err = 12151
Server SQLnet.LOG
Fatal NI connect error 12170.
VERSION INFORMATION:
     TNS for 64-bit Windows: Version 10.2.0.5.0 - Production
     Oracle Bequeath NT Protocol Adapter for 64-bit Windows: Version 10.2.0.5.0 - Production
     Windows NT TCP/IP NT Protocol Adapter for 64-bit Windows: Version 10.2.0.5.0 - Production
Tns error struct:
ns main err code: 12535
TNS-12535: TNS:operation timed out
ns secondary err code: 12560
nt main err code: 505
TNS-00505: Operation timed out
nt secondary err code: 60
nt OS err code: 0
Thx

always raises an ORA-03135 error!!!
Server SQLnet.LOG
Fatal NI connect error 12170.
VERSION INFORMATION:
     TNS for 64-bit Windows: Version 10.2.0.5.0 - Production
     Oracle Bequeath NT Protocol Adapter for 64-bit Windows: Version 10.2.0.5.0 - Production
     Windows NT TCP/IP NT Protocol Adapter for 64-bit Windows: Version 10.2.0.5.0 - Production
Tns error struct:
ns main err code: 12535
TNS-12535: TNS:operation timed out
ns secondary err code: 12560
nt main err code: 505
TNS-00505: Operation timed out
nt secondary err code: 60
nt OS err code: 0
ThxThis is network related problem,may be network very slow.When error occur then execute tnsping <netservicename> command and see that happen.

Can I upgrade to maverick, and still working with windows partitions without any problem?

I have a MacBook Pro runing Mac Os 10.6.8, and a partition runing windows 7, I want to Upgrade to Maverick.
Can I upgrade to maverick, and still working with windows partitions without any problem?

yeah I installed win7 64bit pro on lion and have since upgraded osx to mtn lion and then mavericks
and the windows partition to win8 and then win8.1 never done a reinstall of anything

I have an iphone 5, 2 months old. i am having trouble connecting with any device through bluetooth.

i have an iphone 5, 2 months old. i am having trouble connecting with any device through bluetooth
can not find any other device .like my car CD or other bluetooth audio device even my laptop.
i will be grateful fi some one can help
best regards
sam

And I forgot to mention I have just changed email addresses so with the old email it was all working then with the new email I'm only functioning one direction.

Trouble connecting with IMAC to Windows shared files on network.

Every so often our IMAC will have trouble connecting to our file storage server (running Windows Vista). Usually we reboot the file storage server and this fixes the problem. When the connection problem occurs the IMAC can still smb into other workstations on the network, but not the file storage server. Anyone had any similar issues before? The two things that seem odd to me are 1) That the IMAC can still smb into other workstations on the network and 2) That a restart fixes it everytime.

Hi and Welcome to Apple Discussions.
You are not doing anything wrong. There are compatibility issues with the way Pidgin and iChat Leopard communicate. Your options are to use another windows client (PSI for instance) or make some changes to the configuration of the ichat server (namely set the server up to use the non SSL port 5222 and plain text log in).

Trouble in connecting with windows xp client

Hi I am using windows 2008 r2 enterprise server. Actually I have downgraded 2012 licence to 2008.
I have configured it for PEAP-MSCHAPV2 using NPS and active directory. But windows xp wireless client is unable to connect with PEAP or TLS.
I got the log as "unable to process the eap type".
Is there any issue with the certificates or configuration?
Please assist me about the configuration of windows 2008 r2 enterprise server for TLS and PEAP-MSCHAPv2 and configuration of windows xp wireless client so that the connection is successful.
Assist me on how to configure certificates in server and client side.
Thank u in advance
Goutham M S

Hi,
Have you installed the certificate on the client computer? If you designate a certificate that is not installed on client computers, authentication will fail. For more detailed information about EAP, you can view the link blow.
Extensible Authentication Protocol (EAP) Settings for Network Access
http://technet.microsoft.com/en-us/library/hh945104.aspx
Hope this helps.
Steven Lee
TechNet Community Support

Unreliable Network Connection with Windows

Hi,
I am using a Macbook Pro with Mac OSX Mavericks.
I have shared a few folders on my Macbook over the network so they can be accessed by another computer running Windows 7 Pro. The Macbook is connected to my home network using an ethernet cable via a hub.
I am unable to reliably copy *any* files from Windows to my Macbook.
Any attempt to copy a folder containing more than a few hundred files invariably results in the Macbook's network folder becoming disconnected (and therefore unreadable) briefly, cancelling the whole operation.
This was always pretty unreliable on Mac OSX Mountain Lion, but has since become even worse since I upgraded to Mavericks.
Does anyone else have this problem? How do you reliably share files over your network?

Home Edition or Home Premium?
The Apple SETUP drivers on your OEM DVD (Boot Camp 3.0.x) should enable network and seems that is fine.
The only AV you need, and you do need, is MS Security Essentials. I wouldn't bother with anything else, or any free or commercial suite or firewall.
PCs have had trouble too, with lost connections after resuming from sleep.
Is this wired or wireless?
How about the modem, router, etc. setup and configurations?
Uninstall the device driver and let Windows install its own.
You can always use Device Manager to "rollback" a driver; you have more options and flexible with Windows in that regard than OS X ever had, so you can test and try out different driver. Just look for current network adapter driver. And no, I'd think there is Windows 7 or Windows Vista/7 bundle (installer or zip package).
And if it is the BASIC Windows 7 then I'd also consider upgrade to Home Premium.

Trouble connecting new Windows 8.1 Laptop to Bigpond home network

We have just purchased a brand new HP laptop. It's a mid range machine, 750 gig HDD, 8 gig ram, Intel Core i5 etc running Windows 8.1. When going through the inital set up procedures after taking it out of the box we can't get it to log on to our Bigpond wireless home network. You can easily search for and locate our SSID amongst other weaker signals in the neighbourhood. Upon selecting our network the machine asks for the WPA which we enter exactly as it appears on the Bigpond card - capitals for the letters and no spaces between the characters. The machine then attempts to connect before returning with an error message of 'cannot connect to network' or similar. We have quite a number of other devices connected to our wireless network including smart phones, other laptops running windows 7 (and even XP), Ipods, Ipads, Playstation 3, a ethernet connected desk top etc etc. None of these other devices ever gave trouble when initially trying to connect them to our home network. It was always just enter the SSID and then the WPA and away you go. I have rebooted the modem and even done a full reset on it where you have to enter all user names and passwords etc from scratch but to no avail. I thinking there is maybe some glitch in our new laptop's operating system either inherent with windows 8.1 or a fault with our particular machine. Any suggestions would be gladly welcomed.

Good morning. The Windows 8.1 bug raises it's ugly head again. There is an issue with windows 8.1 that is being worked on at the moment by Telstra/Microsoft to get this problem sorted out, in the meantime try this work-around: Change DNS settings to Google DNS in Windows on your Windows 8.1 laptop - Open Control Panel - Click Network and Internet - Network and Sharing Center - Click Change Adapter Settings.- right click over the network connection and click on Properties Ethernet connection = Local Area ConnectionwiFi connection = Wireless Network Connection - Select the Networking tab- click Internet Protocol Version 4 (TCP/IPv4), then click on the Properties button- click on Advanced and select the DNS tab. If there are any DNS server IP addresses listed there, write them down for future reference, and delete them. - Click OK. For Google Public DNS, select Use the following DNS server addresses below :- Preferred DNS server : 8.8.8.8 Alternate DNS server : 8.8.4.4

IPod still not connecting with windows

I recently got a replacement iPod from Apple. I connected my iPod with my computer and the "Do not disconnect." sign shows up instantly. It was there for over 20 hours so I disconnected it. I checked out the 5 step guide for Windows to recognize the iPod, but it still doesn't work. I'm using the exact same cable and USB port that I used on my old iPod. The iPod is not recognized by my PC or by iTunes. When using the iPod updater, the only option available is "restore" and I already tried that. Whenever I connect my iPod to Windows, it always says "USB device not recognized." and the iPod always goes to the "Do not disconnect." screen. Can anyone help me?

I have a similar problem, excpet that my ipod just stopped being recognised by itunes, although Windows Exploere recognises it. When I run the updater, it keeps telling me to plug in my ipod (even when it is plugged it) and both the update and restore buttons are greyed out.
No hardware has been installed since the ipod was last working properly.
I've tried everything suggested at the website... I've reset the ipod, installed, uninstalled and reinstalled the latest versions of updater and itunes repeatedly, performed restarts running only the ipod drivers using system config, nothing works. I've tried the ipod on both firewire and USB2 connections with the same result - Windows Explorer sees the ipod, but not itunes or ipod updater.
I figure the ipod needs to be restored to its factory settings, but how do I do this if the software to do so won't recognise the ipod? Is there a hardware option to do a complete restore/reset?

Can't connect to wi-fi connection with windows xp.

Hi,
Two days ago, my internet wi-fi connection wouldn't even be recognized in windows xp professional (all drivers are installed). This connection is showed in my other sony pc with windows xp too and in my iMac, and i am able to connect to the wi-fi connection normaly.
A detail i forgot to add is that the wi-fi connection isn't security enabled, but i tried enabling it and still wouldn't work.
Thanx

I just realized that it isn't recognizing any other wi-fi signal.

Trouble Connecting with Windows Partition

Similar Messages

Maybe you are looking for