Trouble e mailing from i photo

whes using share to email photo add message comes up momentarily then disappears

If you are running a 10.9.4 system it is not PPC. It is Intel. Since the question is resolving an iPhoto issue, I've asked this post be moved to that forum:
iPhoto for Mac

Similar Messages

I am having trouble getting mail from the server that my new iMac is connected to. I have to reboot the system to get Outlook for Mac to access the system. Any ideas?

I am having trouble getting mail from the shaw server that my new iMac is connected to. I have to reboot the system to get Outlook for Mac to access the system and obtain new messages. Any ideas? Its at the point where I have started using the PC again as its less trouble.......

In Firefox 3.6.4 and later the default connection settings have been changed to "Use the system proxy settings". 
See "Firefox connection settings" in [[Server not found]]
You can find the connection settings in "Tools > Options > Advanced : Network : Connection" 
If you do not need to use a proxy to connect to internet then select No Proxy

I cannot e-mail from i-photo

This is a second request for help on this matter. I cannot send photos directly out of i-photo. I highlight the photo, click on "share", enter the address and click on "send". The progress bar shows activity but will enventually stop. A window will appear that contains a Yellow warning triangle and the i-photo icon. Also. in the window is a small prompt that says "OK". If I click on OK, the program makes another attempt to send the photo. Same results as before. I am using Thunderbird for a mail manager. I've double-checked my i-photo account setup with my provider, verifying the correct outgoing mail server name, account name, port number,...etc... I have no problems with e-mails in general or sending photos as attachments. I just can't do it directly from i-photo.

Have you tried to delete your account from iPhoto and to add it again?
iPhoto > Preferences > Accounts
Select your email account and press "-" to delete it,. Then enter it again by pressing "+"

Having trouble sending mail from iPad. It keeps freezing? Can anyone help?

I am having trouble sending mail as it keeps freezing mid send. Sometimes it takes a couple of days to suddenly send. Rest of iPad working fine. Can anyone help?

You are welcome!
I enclose the link to show how 'this solved my question' and 'this helped me' work since there is no point in awarding either of them to yourself. As so can see, you do not get any points. It is oly a short read
https://discussions.apple.com/static/apple/tutorial/mark.html

Spontaneous trouble receiving mail from Mail Application and Web Mail

Hello,
Unfortunately I need some assistance. For unknown reasons, today at about 12 PM our in house email server (10.3.9) started failing to allow any user to connect to download mail. I have users running POP and other users running IMAP accounts that had the same lack of function.
When I connect using web mail I get the following error:
Error connecting to IMAP server: localhost. 61 : Connection refused
When I connect from the Mail application I get the following error:
The server "mail.mycompany.com" refused to allow a connection on port 110
 When I connect using the Server Admin program the IMAP and POP logs are empty despite being set to the “All events” setting, and the SMTP log contains the following message frequently despite still being able to send email from the affected accounts:
(temporary failure. Command output: couldn't connect to lmtpd: Unknown Error Code: 0_ 421 4.3.0 deliver: couldn't connect to lmtpd_ )
I have restarted the server, I have run disk utility to repair permissions and made no intentional adjustments to the server in the last week. The last adjustment to the mail server I made was about 1 month ago to turn on IMAP authentication to allow me to switch from a POP to an IMAP email account.
Please help me figure this out!
Thanks in advance.
 Mike
(PS I am a veterinarian, not an IT guru. I run my own mail and web servers because with Apple products, I can.)

Thanks for your assistance.
I found the logs and while there is a mail.log there is no mailaccess.log file.
There is a mailaccess.log.0.gz which I decompressed and I also decompressed the mailacess.log.1.gz.
The mailaccess.log.1 file contains entries from July 10th through July 11th.
The mailaccess.log.0 file contains entries from August 14th through August 15th (today). Seems like there was a long period that did not get archived correctly.
Here is a subset of what was in the mail.log from this morning:
Aug 15 07:04:03 www postfix/pipe[24378]: 5B2201493AC: to=<[email protected]>, relay=cyrus, delay=1001, status=bounced (Command time limit exceeded: "/usr/bin/cyrus/bin/deliver")
Aug 15 07:04:03 www postfix/pipe[24376]: 5B2201493AC: to=<[email protected]>, relay=cyrus, delay=1001, status=bounced (Command time limit exceeded: "/usr/bin/cyrus/bin/deliver")
Aug 15 07:04:03 www postfix/cleanup[10663]: 86BD71493BA: message-id=<[email protected]>
Aug 15 07:04:03 www postfix/qmgr[25517]: 86BD71493BA: from=, size=19952, nrcpt=1 (queue active)
Aug 15 07:04:04 www postfix/smtp[10668]: 86BD71493BA: to=<sentto-12433195-1540-1187185326-mrbroome=avmi.net@returns.groups.yahoo.com> , relay=rtn7.grp.scd.yahoo.com[66.218.66.214], delay=1, status=sent (250 ok 1187186644 qp 73498)
Aug 15 07:06:16 www postfix/pipe[26600]: 8D50C1493AF: to=<[email protected]>, relay=cyrus, delay=1002, status=bounced (Command time limit exceeded: "/usr/bin/cyrus/bin/deliver")
Aug 15 07:06:16 www postfix/pipe[26602]: 8D50C1493AF: to=<[email protected]>, relay=cyrus, delay=1002, status=bounced (Command time limit exceeded: "/usr/bin/cyrus/bin/deliver")
Aug 15 07:06:16 www postfix/cleanup[12865]: 56B5E1493BC: message-id=<[email protected]>
Aug 15 07:06:16 www postfix/qmgr[25517]: 56B5E1493BC: from=, size=51949, nrcpt=1 (queue active)
Aug 15 07:06:22 www postfix/smtp[12866]: 56B5E1493BC: to=<[email protected]>, relay=mailer.versiontracker.com[66.179.48.93], delay=6, status=sent (250 2.0.0 l7FE6L807756 Message accepted for delivery)
Aug 15 07:30:50 www postfix/smtpd[7082]: unable to get certificate from '/etc/postfix/server.pem'
Aug 15 07:30:50 www postfix/smtpd[7082]: 7082:error:02001002:system library:fopen:No such file or directory:bss_file.c:278:fopen('/etc/postfix/server.pem','r'):
Aug 15 07:30:50 www postfix/smtpd[7082]: 7082:error:20074002:BIO routines:FILE_CTRL:system lib:bss_file.c:280:
Aug 15 07:30:50 www postfix/smtpd[7082]: 7082:error:140DC002:SSL routines:SSLCTX_use_certificate_chainfile:system lib:ssl_rsa.c:760:
Aug 15 07:30:50 www postfix/smtpd[7082]: TLS engine: cannot load RSA cert/key data
Aug 15 07:30:50 www postfix/smtpd[7082]: connect from valhalla.mailpure.com[66.109.52.210]
Aug 15 07:30:51 www postfix/smtpd[7082]: 183AA1493D0: client=valhalla.mailpure.com[66.109.52.210]
Aug 15 07:30:51 www postfix/cleanup[7088]: 183AA1493D0: message-id=<[email protected]>
Aug 15 07:30:52 www postfix/qmgr[25517]: 183AA1493D0: from=<[email protected]>, size=26283, nrcpt=2 (queue active)
Aug 15 07:30:52 www postfix/smtpd[7082]: disconnect from valhalla.mailpure.com[66.109.52.210]
Aug 15 07:47:32 www postfix/pipe[7105]: 183AA1493D0: to=<[email protected]>, relay=cyrus, delay=1001, status=bounced (Command time limit exceeded: "/usr/bin/cyrus/bin/deliver")
Aug 15 07:47:32 www postfix/pipe[7109]: 183AA1493D0: to=<[email protected]>, relay=cyrus, delay=1001, status=bounced (Command time limit exceeded: "/usr/bin/cyrus/bin/deliver")
Aug 15 07:47:32 www postfix/cleanup[22267]: CD81D1493F0: message-id=<[email protected]>
Aug 15 07:47:32 www postfix/qmgr[25517]: CD81D1493F0: from=, size=28115, nrcpt=1 (queue active)
Aug 15 07:47:37 www postfix/smtp[22271]: CD81D1493F0: to=<[email protected]>, relay=cvm39.vetmed.wsu.edu[134.121.130.6], delay=5, status=sent (250 2.6.0 <[email protected]> Queued mail for delivery)
The following is copied from the mailaccess.log.0 file from yesterday when the trouble started:
Aug 14 21:43:56 www master[269]: exiting on SIGTERM/SIGINT
Aug 14 21:43:56 www deliver[24981]: backend_connect(): couldn't read initial greeting: (null)
Aug 14 21:43:56 www master[25420]: process started
Aug 14 21:48:55 www deliver[25478]: connect(/var/imap/socket/lmtp) failed: Connection refused
Aug 14 21:50:22 www master[25519]: process started
Aug 14 22:07:03 www deliver[25632]: connect(/var/imap/socket/lmtp) failed: Connection refused
Aug 14 22:40:22 www deliver[25829]: connect(/var/imap/socket/lmtp) failed: Connection refused
Aug 15 06:23:50 www ctl_cyrusdb[25520]: DBERROR db4: PANIC: Too many open files
Aug 15 06:23:50 www ctl_cyrusdb[25520]: DBERROR: critical database situation
Aug 14 23:23:50 www master[25519]: process 25520 exited, status 75
Aug 14 23:23:50 www master[25519]: ready for work
Aug 14 23:23:50 www ctl_cyrusdb[26081]: DBERROR db4: fatal region error detected; run recovery
Aug 14 23:23:50 www ctl_cyrusdb[26081]: DBERROR: dbenv->open '/var/imap/db' failed: DB_RUNRECOVERY: Fatal error, run database recovery
Aug 14 23:23:50 www ctl_cyrusdb[26081]: DBERROR: init() on berkeley
Aug 14 23:23:50 www ctl_cyrusdb[26081]: checkpointing cyrus databases
Aug 14 23:23:50 www ctl_cyrusdb[26081]: DBERROR db4: txn_checkpoint interface requires an environment configured for the transaction subsystem
Aug 14 23:23:50 www ctl_cyrusdb[26081]: DBERROR: couldn't checkpoint: Invalid argument
Aug 14 23:23:50 www ctl_cyrusdb[26081]: DBERROR: sync /var/imap/db: cyrusdb error
Aug 14 23:23:50 www ctl_cyrusdb[26081]: DBERROR db4: DBENV->logarchive interface requires an environment configured for the logging subsystem
Aug 14 23:23:50 www ctl_cyrusdb[26081]: DBERROR: error listing log files: Invalid argument
Aug 14 23:23:50 www ctl_cyrusdb[26081]: DBERROR: archive /var/imap/db: cyrusdb error
Aug 14 23:23:50 www ctl_cyrusdb[26081]: DBERROR db4: txn_checkpoint interface requires an environment configured for the transaction subsystem
Aug 14 23:23:50 www ctl_cyrusdb[26081]: DBERROR: couldn't checkpoint: Invalid argument
Aug 14 23:23:50 www ctl_cyrusdb[26081]: DBERROR: sync /var/imap/db: cyrusdb error
Aug 14 23:23:50 www ctl_cyrusdb[26081]: DBERROR db4: DBENV->logarchive interface requires an environment configured for the logging subsystem
Aug 14 23:23:50 www ctl_cyrusdb[26081]: DBERROR: error listing log files: Invalid argument
Aug 14 23:23:50 www ctl_cyrusdb[26081]: DBERROR: archive /var/imap/db: cyrusdb error
Aug 14 23:23:50 www ctl_cyrusdb[26081]: DBERROR db4: txn_checkpoint interface requires an environment configured for the transaction subsystem
Aug 14 23:23:50 www ctl_cyrusdb[26081]: DBERROR: couldn't checkpoint: Invalid argument
Aug 14 23:23:50 www ctl_cyrusdb[26081]: DBERROR: sync /var/imap/db: cyrusdb error
Aug 14 23:23:50 www ctl_cyrusdb[26081]: DBERROR db4: DBENV->logarchive interface requires an environment configured for the logging subsystem
Aug 14 23:23:50 www ctl_cyrusdb[26081]: DBERROR: error listing log files: Invalid argument
Aug 14 23:23:50 www ctl_cyrusdb[26081]: DBERROR: archive /var/imap/db: cyrusdb error
Aug 14 23:23:50 www ctl_cyrusdb[26081]: done checkpointing cyrus databases
Looks like my mail database is trashed. Let me know if this is correct and if so, how I should go about trying to restore/rebuild, etc.
Thanks again for your assistance.
Mike

Trouble importing mail from contacts

MacBook Pro, Version 10.9.4 When I try to mail to a group from my contacts, I get duplicate names and addresses. This only happens with one group and just started.

Hello Oral History.
Mail crashes (i.e. quits unexpectedly) even if you select the wrong folder? Don’t you even get a “No valid Mail for Mac OS X files were found” error message in those cases?
There could be more than one thing amiss here. Does Mail otherwise work fine on the Intel iMac? In particular, can you create custom “On My Mac” mailboxes in Mail by means of Mailbox > New Mailbox or does Mail complain with some error message when you try to do that?
Verify/repair the startup disk (not just permissions), as described in the following article:
The Repair functions of Disk Utility: what's it all about?
Do you have any Mail plug-ins? In the Finder, go to each of the following folders (if they exist). What do you see there?
/Library/InputManagers/
/Library/Mail/Bundles/
~/Library/InputManagers/
~/Library/Mail/Bundles/
To make accurately reporting this information easier, open /Applications/Utilities/Terminal, type the following command (you may just copy it from this post and paste it in Terminal), and press <Return>. You may then copy the output of that command from Terminal and paste it in your reply to this post:
ls -1 /Library/InputManagers /Library/Mail/Bundles ~/Library/InputManagers ~/Library/Mail/Bundles
Note: For those not familiarized with the ~/ notation, it refers to the user’s home folder. You can easily locate any of the folders referred to in this post by copying the folder path here, doing Go > Go to Folder in the Finder, and pasting the folder path there.

Trouble sending mail from hotels

My bro-in-law are having the same problem. When connected at a hotel through a WIRED connection, we can't send messages from mail. It puts them in the out box for sending later. This happened to me a few months ago at another hotel.
Any ideas? Very strange....Thanks!

I've been having this problem for a long time while traveling (so I've always had to use Safari to send my mail) but in searching through the forums I just discovered this little tip - it was in a discussion about using the iPhone for mail, but it worked perfectly for my regular OS X Mail program as well:
Which port are you using for this SMTP server with the Mail application on your Mac and with the iPhone?
If 25, try using 587 for the SMTP server
So in Mail
- go into Preferences: Account Settings
- make sure your .Mac account is selected on the left
- make sure "Account Information" is selected at the top
- at the bottom, next to "Outgoing Mail Server (SMTP)" (which should be set to smtp.mac.com) click the button "Server Settings..."
- in the new window, where it says "Server Port" if it's set to 25, change it to 587
I did that and much to my amazement, I can send messages from a hotel for the first time. Not sure if it'll work in every hotel, but excited to hear that little jet taking off from my Mail.
The original message where I found this is by Allan Sampson in this thread:
http://discussions.apple.com/thread.jspa?messageID=5086078&#5086078

How to add photo from iCloud Photo Library to Apple Mail?

I have enabled iCloud Photo Library (Beta) and Upload to My Photo Stream on iPhone 5 iOS 8.1, but on OSX new photos are not showing under iCloud drive folder, also if I press Photo Browser button visible are only iPhoto & iCloud menu without new Photos. How to attach photos to Mail from iCloud Photo Library?

Hi Salsalove,
Welcome to Apple Support Communities.
The article linked below will walk you through the process of deleting the photos and videos that you no longer want saved on iCloud, so you don’t have to wait 30 days for them to be delted.
iCloud security and privacy overview
Photos
You can delete unwanted photos from My Photo Stream at any time. Learn about deleting your photos.
You can delete unwanted photos and videos from your shared albums at any time. Learn how to delete photos and videos from a shared album.
You can remove subscribers from shared albums that you created at any time. Learn how to move subscribers from your shared album.
If you’re using Family Sharing, you will be automatically added to an iCloud Photo Sharing shared album with your family members. However, you're in control of what photos, videos, and comments you want to share. Nothing is shared automatically or by default.
Take care,
-Jason

Bug in 9.1.1 release : In mail from iphoto changing size not shown in MB

Could someone figure out how to report back to apple that we LIKE the 9.1.1 release that fixes it so you can select the size of your photo (smalll, medium, large, actual and optimized now)
BUT the problem is that when you have preference MAIL FROM I PHOTO - the little "size of this email" indicator that shows under the mail template does not change when you change the size of the photo between the choices above. It always just shows one size (the big one) so they need to fix that next time.
Thanks. I don't know how to report this to them. Signed - really happy so far with iphoto 11

It's working for me. No matter what template I choose I get the size menu with 4 sizes to choose from, small, medium, large and full size. Whatever size I select ends up as the size showing in the menu.
So there's apparently something amiss with your library or iPhoto. Backup the library and delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your User/Library/Preferences folder, launch iPhoto a try again..
NOTE: If you're moved your library from its default location in your Home/Pictures folder you will have to point iPhoto to its new location when you next open iPhoto by holding the the Option key. You'll also have to reset the iPhoto's various preferences.
Happy Holidays

How to send mail from servlets

m having troubles sending mail from servlets...
how do you use the SimpleMailUser object needed in the session?
a sample code on this would be of great help, thanks!

<html>
<body bgcolor="white">

<%@ page import="javax.servlet.http.HttpUtils" %>
<%@ page import="java.util.*" %>
<%@ page import = "java.sql.*" %>
<%@ page import = "java.io.*" %>
<%@ page import= "sun.net.smtp.SmtpClient" %>
<%
 String from,to,subject,msgbody,serverName;
 try
from = request.getParameterValues("from")[0];
to = request.getParameterValues("to")[0];
subject = request.getParameterValues("subject")[0];
msgbody = request.getParameterValues("msgbody")[0];
serverName = request.getParameterValues("server")[0];
 catch (Exception e) // Generally Speaking, an Error getting one of these
 // Values means that it wasnt passed in; inform the user
 out.println("You must call this JSP from this ");
 out.println("<A href=\"FormMail.htm\"> form</A>. ");
 out.flush();return;
%>
Hold On A Moment while I try to Send Your Mail... 
<%
 out.flush();
 // Here are the real guts of the mail sending
 try
 sun.net.smtp.SmtpClient sm = new sun.net.smtp.SmtpClient(serverName);
 sm.from(from);
 sm.to(to);
 PrintStream msg = sm.startMessage();
 msg.println("To: "); // Note dont use + for Performance
 msg.println(to);
 msg.println("Subject: ");
 msg.println(subject);
 msg.println();
 msg.println(msgbody);
 msg.println("==============");
 msg.print("This mail brought to you by JSP MAIL..from a user at IP ");
 msg.println(request.getRemoteHost());
 sm.closeServer();
 out.println("Your Mail Has Been Sent!");
 catch (Exception e)
 out.println("The mail couldn't be sent, probably because the mailhost wasnt set correctly. ");
 out.println("The error message I am getting is: ");
 out.println(e.getMessage());
%>
 
 
Click here to send another!

Mac Mail not receiving mail from certain sender

I'm having trouble receiving mail from a certain sender. I verified that they have my correct email address and I don't think it's getting filtered as junk because my junk mail folder is empty. Is there anything else that could be causing this? Any help would be appreciated.

Try the Mail for Tiger forum http://discussions.apple.com/forum.jspa?forumID=753

Please Help! Trouble sending email from Apple Mail to PC-users

When sending email in RTF format from Mail to PCs, we have som trouble which I havent found out how to solve:
1) the PC user gets a scrambler email, in which some of the text is like "chinese". Illegible! This seems to happen especialle with PDFs attached.
2) Graphics or pictures we wish to appear directly in the mail is not visible to the receiver, but is only included as attachments.
I know most mail encoding problems can be avoided if we send mail i the "old" simple text format. But we wish to send mails in which our company logo appears in the signature, and sometimes we send graphics and pictures that we wish to be seen directly in the mail (and not as attached files only).
I have set the preferences so that mails as standard are send in RTF format and attachments are send in the "windows friendly" mode.
What really irritates me is that we have more success sending PC friendly mails from Entourage. But for two other reasons we wish to use Mail instead of Enrourage (Entourage has more crash downs/"broken" database issues. And we use Plaxo which does not sync with Entourage)..
Could some of you Please help or direct me to helpfull info?
Sincerely ...Peter and Thomas

Hello Peter.
Your OS detail provided indicates you are running 10.3.9 but you posted in the Mail & Address Book - Tiger discussions.
1) When you say PC user, more than likely the PC users reporting this problem are using Outlook for their email client since Outlook has always had problems with Mail's RTF and sometimes severe problems depending on the version used by the recipient. Using Plain Text for message composition will resolve this but check this link for an alternative.
http://homepage.mac.com/thgewecke/woutlook.html
2) All Mail.app versions prior to Tiger Mail (2.x) do not support composing in HTML. RTF with Tiger Mail is HTML but Tiger Mail does not include an HTML composer/editor.
The Mail.app displays all photo/image and single page PDF attachments inline or viewed in place within the body of the message by default which cannot be turned off. This is not the same as being embedded which cannot be done with any Mail.app version directly regardless. Depending on the recipient's email client and available settings, such attachments may appear inline or viewed in place within the body of the message when the message is opened by the recipient (as when receiving such attachments with the Mail.app) or as attached files only which must be opened separately to be viewed for which the sender has no control over.
The same in reverse. Photo/image attachments to a Windows Outlook message appear as attached files only when the message is sent but when sent to a Mail.app user, such attachments will appear inline or viewed in place within the body of the message when the message is opened which the Windows Outlook user has no control over.
The company logo included with your Signature is likely appearing as an attached file to the message only but how the logo appears when opened by the recipient depends on the recipient's email client.
The only thing the Windows Friendly Attachment option does is remove the Apple resource fork for attached files which are invisible to fellow Mac users.

Send photos by e-mail from iPhoto.

I have problem to share by e-mail from iPhoto 11. I have fullly functional Mail on my macbook pro with 6th e-mail accounts. When i tryed to send some photos from iPhoto 11 i got message:
Your email did not go through because the server did not reply.
Check your Internet connection. If the connection is working properly, the email server may be down. Try sending your email again later.
Server and connection working properly and account is also OK (the same as in Mail from Mac OS X)
For me is now one resutls: I must select photos in IPhoto and export to the Desktop and after that send by attach to the Mail from MacOS-X. It works OK. But its horrible for me! Old version iPhoto 9 directly connect Email application and works OK. Help me.
Thanks very much Robert

You can send emails from iPhoto to Mail just like you could in the older versions
Iphoto menu -> Preferences -> General and select Mail at the 'EMail Photos Using...' dropdown
Regards
TD

I have got two photos by mail from iPhoto. My friend has put descriptions in the description field. The I got the mail I saw the description below each photo. If I check the photos with Preview they have Exif and JFIF fields but no IPTC field.

I have got two photos by mail from iPhoto. My friend has put descriptions in the description field. The I got the mail I saw the description below each photo. If I check the photos with Preview they have Exif and JFIF fields but no IPTC field.

Does you friend use any accented letters in the descriptions? That might cause it but I don't know for sure.
Has he run any repair operations on his library, i.e. repairing the database file? Another possible fixe that's easy to apply is the following:
1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your
Home/Library/ Preferences folder.
2 - delete iPhoto's cache folder(s):
Home/Library/Containers/com.apple.iPhoto
and, if there is one, the
Home/Library/Caches/com.apple.iPhoto folder
3 - reboot, launch iPhoto and try again.
NOTE: In Lion and Mountain Lion the Home/Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and press the Return key - 10.7: Un-hide the User Library folder.
For Mavericks, 10.9, go to your Home folder and use the View ➙ Show View Options menu to bring the this window:
The demo version of GraphicConverter can be used to view/check/edit the ITPC fields in an image file after exporting.

When I try to e-mail photos from i photo 11 I get a "Error type 10665" message... what does that mean?, When I try to e-mail photos from i photo 11 I get a "Error type 10665" message... what does that mean?

When I try to e-mail photos from i photo 11... I am getting this message: "Error type 10665" .
What does this mean? I have gone over the tutorials for emailing photos... very simple... am doing exactly that...
and I have also done this before... so I am not sure what the problem is.
The photos have been downloaded from my i phone... would that matter?
thank you..
debi

Hello WayneSchlapkohl,
Welcome to the HP Support Forums!
I understand that you are looking to Email a scanned photo, but do not want the file to be to large. Are you using HP software when you get the error "not connected to the internet" ? If so, What is the Operating System installed, Windows, including version, e.g. Windows 7 or Mac, including version, e.g. 10.8?
Lowering the DPI or resolution will help keep the file size down, if you have an option for that in the software.
Also, what is the Email client are you using, MSN, Gmail, etc?
Cheers,
JERENDS
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Trouble e mailing from i photo

Similar Messages

Maybe you are looking for