Trouble encoding audio when burning to dvd

I have finished editing a nearly 2-hour long wedding video and all is going well, everything encodes fine until....it comes to my audio. I have now tried to burn this movie 7 times to dvd and EVERY time it freezes when it reaches the stage of encoding the audio. Any tips?
Message was edited by: Bri

Hello, trouble,
Welcome to the discussions. Sorry you are having so much trouble burning your DVD. What exactly do you see when you think it is freezing? Does it just look as if nothing is happening? Do you actually get a message that says there is a problem with the burn?
If you are using any version of iDVD prior to iDVD 8, I suspect that your audio is encoding fine and not really 'freezing'. It will LOOK as if everything has stopped, because the those versions did not include a 'time remaining' notice. You can see a small thumbnail of the menus encoding, and you can see the video of your movie as the video encodes, but when audio encoding is occurring, there is only a black square. Depending on your computer system, the process can take some time. I recommend that you just leave it alone, maybe overnight, and see if it is fine in the morning. On my older iMac, a nearly 2hr movie might take over 12 hours to finish encoding/burning.
I do recommend that do a 'save as disk image' for every iDVD project.
If you are not familiar with this process, it is the creation of a file that is an exact replica of your iDVD project. The encoding looks the same as it is occurring, but the end result is a disk image file, not a burned DVD disk. There are several reasons to do this: It can save you from wasting disks if there is something wrong that prevents a successful burn; you can view your disk image on your computer using the application DVD Player to view your project and see if it is ok; you can use the disk image for burning disks through Disk Utility (or Toast); and you can control the burn speed--should be 4x or less.
And, you now have a self-contained image file that you can save and from which you can burn disks in the future. Because it is self-contained, you can safely delete your iMovie and iDVD projects, thus saving drive space. Even though you can burn another DVD using one that you already have burned, the disk image file is a better backup. DVD disks can crack, break, melt, etc. and if you lose your copy, you will not be able to burn another.

Similar Messages

Gaps in audio when burning on dvds and cd

When I burn a dvd and add audio, I have gaps in the playback on the audio only.

Hello BCRC,
What make / model computer are you using?
What operating system?
What program are you using to burn the DVD's and CDs?
By gaps are you meaning that there is a gap from one track to the next and you are looking to burn gapless discs, or are you referring to the audio actually skipping parts of the audio when burning?
If I have helped you in any way click the Kudos button to say Thanks.
The community works together, click Accept as Solution on the post that solves your issue for other members of the community to benefit from the solution.
- Friendship is magical.

Missing Audio When Burning A DVD For Grandma

I've created a short 8 minute video with an audio track on top of it. The 8 minutes consists of a 2 minute video opening created in quicktime. 4 minute slide show imported from iPhoto and 2 minutes of closing credits created in iMovie. The 8 minute soundtrack was created in garage band using several iTunes tracks. (I'M TRYING TO BE ALL APPLE!!)
Everything looks great when I preview in iDVD. However, when I burn the dvd the audio drops out about 3 minutes into the video and then starts up again at the very end (out of synch of course).
I've tried everything I can think of - created an image in iDVD and burned using disc utilities , swapped out the audio tracks, changed the photos...still nothing works.
Any suggestions?? We have a first birthday coming up and we really want to get this to Grandma. Thanks.

Hi
Can be audio from iTunes or strange file formats eg .mp3 etc.
iTunes - Copy out as an Audio-CD .aiff
Other audio formats - convert to .aiff 48kHz 16-bit
Use this and it most probably works.
Yours Bengt W

IDVD video encode error when burning to DVD

I am trying to burn a new copy of a project I successfully burned to DVD 2 years ago. I have not changed the source material. After the menu renders and video encoding begins I immediately get an error message "video encoding error." There are no menu warnings. All video is successfully previewed. Nothing has changed from the previous burn. The project info box shows all video and audio properly encoded and present.
What gives?

The way from FCE or FCP has been the same for me for lot's of years since FinalCut 1.2.5 I think (was no Express or Pro then)
And QuickTime Conversion never worked for me - I guess You were lucky two years ago.
FCE/P to iDVD
Several things
• How to go from FCE/P to iDVD
• Free space on Start-up hard disk
• Encoding
• Brand and type of DVDs used
• Burn speed set
• iDVD BUG
• Chapters
How to go from FCE/P to iDVD I do
• Disable Screen and Energy saver
• IMPORTANT --> FIRST in FinalCut - Mix Down Audio under Sequence Menu / Render Only / Mix-down
• Export out as a QuickTime .mov file
• Select with Mark - Chapter Mark
• Not as Self-Contained (not important but saves time and space)
• NO QUICKTIME CONVERSION (IMPORTANT)
This QT.mov file I import into iDVD from within iDVD.
Free space on Start-up hard disk
I set a minimum of 25GB (for Mac OS and iDVDs temp files)
Just double click on the Hard Disk icon (top right on DeskTop) and read on bottom part of this windows frame e.g,
( in English - 1 of 14 selected, 38.24 GB FREE)
Encoding
• I use Pro Quality encoding if material (video + menu) exceeds 40 minutes ! if less I use Best Performances
Brand and type of DVDs used
• I use Verbatim
• I use DVD-R
Burn speed set
• I set down this to x4 (or x1) - BEST IS NOT BEST at all only fastest and results in Maximum amount of BURN ERRORS !
iDVD BUG
• One can not go back to movie-project for any alterations and then go back to
the iDVD project. It will notice and ask You to either Up-date or Cancel. Neither
of them will work.
Medicine - Start a brand new iDVD project.
Use of Chapters
• I only use a to z and 0 to 9 in naming them. NO other symbol/letter !
• NO Chapter-mark at very beginning - iDVD NEEDS TO set this by it self
• No Chapter marks in or within two seconds from a transition
(Way around this last one - Export movie as QT full quality and NO Chapter marks
Import this into a new Movie-project and now You are free to set C-Ms where You want
them except at very beginning - still)
Material used to build movie
• video - I use streamingDV (or convert all other to this e.g. .mp4, .avi, .wmv etc)
• audio - I use .aiff 16-bit 48kHz or from Audio-CD (44.1kHz) - no .mp3 or direct from iTunes
• photos - I use .jpg - no .bmp etc
Trash iDVD pref. file and run Repair Permissions - and have a re-try.
from post ??
May not be relevant, but I had the same problem with iDVD, where burned DVDs showed a green screen. It was cured by quitting Quicksilver and Quickeys as well as disabling sleep and screen-saving
Yours Bengt W

Out of sync audio when burning a DVD with iDVD

Hello Folks,
I'm trying to burn 3 - 1 minute quicktime files to a DVD using iDVD 7.1.2 and everytime I burn a disc the sound is out of sync. It seems to speed up and finish about 10 seconds earlier than the video. When previewed all is fine. I have checked the 3 quicktime files and they are perfectly in sync when played. Any suggestions ?
Thanks

Hi Bengt,
Thanks for replying ! I spoke with tech support and we tried everything including saving it as a disk image but after the burn it still was out of sync.
Then we tried creating a project in i Movie and then imported (shared) the project into i DVD and it worked !
This was a frustrating issue to tackle but I'm ready for it if it happens again.
Thank you very much for your help. Have a great day.
Best regards,
Joe F

No audio when burning a DVD from iMovie to iDVD

Hope someone can help me here, I'm not getting any audio on the DVD I've burnt even though it's working fine in the preview screen on my desktop. Even the audio from the theme I've chosen isn't coming through.
I'm using iMovie HD 5.0.2 and iDVD 5.0.1

even though it's working fine in the preview screen on my desktop.
You can't really depend on the preview function to pick up problems with a burn. That is the reason that saving to disc image is recommended. If that works, then the burned DVD will be ok.

Does anyone experienced bad quality when burning a DVD?

Does anyone experienced bad quality when burning a DVD?
Using OS 10.6.8 and Magiv Video in iDVD, I am having a hard time creating a decent DVD. The videos per se are fine, but the intro menu and menu text and images are extremely poor quality and hard to read. What is going on?

Hi my notes on this - might be of help
DVD quality
1. iDVD 08, 09 & 11 has three levels of qualities. (version 7.0.1, 7,0.4 & 7.1.1)
iDVD 6 has the two last ones
• Professional Quality
(movies + menus up to 120 min.) - BEST (but not always for short movies e.g. up to 45 minutes in total)
• Best Performances
(movies + menus less than 60 min.) - High quality on final DVD (Can be best for short movies)
• High Quality (in iDVD08 or 09) / Best Quality (in iDVD6)
(movies + menus up to 120 min.) - slightly lower quality than above
About double on DL DVDs.
2. Video from
• FCE/P - Export out as full quality QuickTime.mov (not self-containing, no conversion)
• iMovie x-6 - Don't use ”Share/Export to iDVD” = destructive even to movie project and especially so
when the movie includes photos and the Ken Burns effect NOT is used. Instead just drop or import the iMovie movie project icon (with a Star on it) into iDVD theme window.
• iMovie’08 or 09 or 11 are not meant to go to iDVD. Go via Media Browser and as Large (NOT HD or other resolutiona as result will suffer) or rather use iMovie HD 6 from start.
3. I use Roxio Toast™ to make an as slow burn as possibly e.g. x4 or x1 (in iDVD’08 or 09 this can also be set)
This can also be done with Apple’s Disk Utilities application when burning from a DiskImage.
4. There has to be about or more than 25Gb free space on internal (start-up) hard disk. iDVD can't
use an external one as scratch disk (if it is not start-up disc). For SD-Video - if HD-material is used I guess that 4 to 5 times more would do.
5. I use Verbatim ( also recommended by many - Taiyo Yuden DVDs - I can’t get hold of it to test )
6. I use DVD-R (no +R or +/-RW) - DVD-R play’s on more and older DVD-Players
7. Keep NTSC to NTSC - or - PAL to PAL when going from iMovie to iDVD
(I use JES_Deinterlacer to keep frame per sec. same from editing to the Video-DVD result.)
8. Don’t burn more than three DVDs at a time - but let the laser cool off for a while before next batch.
iDVD quality also depends on.
• DVD is a standard in it self. It is Standard Definition Quality = Same as on old CRT-TV sets and can not
deliver anything better that this.
HD-DVD was a short-lived standard and it was only a few Toshiba DVD-players that could playback.
These DVDs could be made in DVD-Studio Pro. But they don’t playback on any other standard DVD-Player.
Blu-Ray / BD can be coded onto DVDs but limited in time to - about 20-30 minutes and then need
_ Roxio Toast™ 10 Pro incl. BD-component
_ BD disks and burner if full length movies are to be stored
_ BD-Player or PlayStation3 - to be able to playback
The BD-encoded DVDs can be play-backed IF Mac also have Roxio DVD-player tool. Not on any standard Mac or DVD-player
Full BD-disks needs a BD-player (in Mac) as they need blue-laser to be read. No red-laser can do this.
• HOW much free space is there on Your internal (start-up) hard disk. Go for approx. 25Gb.
less than 5Gb and Your result will most probably not play.
• How it was recorded - Tripod vs Handheld Camera. A stable picture will give a much higher quality
• Audio is most often more critical than picture. Bad audio and with dropouts usually results in a non-viewed movie.
• Use of Video-editor. iMovie’08 or 09 or 11 are not the tools for DVD-production. They discard every second line resulting in a close to VHS-tape quality.
iMovie 1 to HD6 and FinalCut any version delivers same quality as Camera record in = 100% to iDVD
• What kind of movie project You drop into it. MPEG4 seems to be a bad choice.
other strange formats are .avi, .wmv, .flash etc. Convert to streamingDV first
Also audio formats matters. I use only .aiff or from miniDV tape Camera 16-bit
strange formats often problematic are .avi, .wmv, audio from iTunes, .mp3 etc
Convert to .aiff first and use this in movie project
• What kind of standard - NTSC movie and NTSC DVD or PAL to PAL - no mix.
(If You need to change to do a NTSC DVD from PAL material let JES_Deinterlacer_3.2.2 do the conversion)
(Dropping a PAL movie into a NTSC iDVD project
(US) NTSC DVDs most often are playable in EU
(EU) PAL DVDs most often needs to be converted to play in US
UNLESS. They are play-backed by a Mac - then You need not to care
• What kind of DVDs You are using. I use Verbatim DVD-R (this brand AND no +R or +/-RW)
• How You encode and burn it. Two settings prior iDVD’08 or 09
Pro Quality (only in iDVD 08 & 09)
Best / High Quality (not always - most often not)
Best / High Performances (most often my choice before Pro Quality)
1. go to iDVD pref. menu and select tab far right and set burn speed to x1 (less errors = plays better) - only in iDVD 08 & 09
(x4 by some and may be even better)
2. Project info. Select Professional Encoding - only in iDVD 08 & 09.
Region codes.
iDVD - only burn Region = 0 - meaning - DVDs are playable everywhere
DVD Studio pro can set Region codes.
1 = US
2 = EU
unclemano wrote
What it turned out to be was the "quality" settings in iDVD. The total clip time was NOT over 2 hours or 4.7GB, yet iDVD created massive visual artifacts on the "professional quality" setting.
I switched the settings to "high quality" which solved the problem. According iDVD help, "high quality" determines the best bit rate for the clips you have.
I have NEVER seen iDVD do this before, especially when I was under the 2 hour and 4.7GB limits.
For anyone else, there seem to be 2 places in iDVD to set quality settings, the first is under "preferences" and the second under "project info." They do NOT seem to be linked (i.e. if you change one, the other is NOT changed). take care, Mario
TO GET IT TO WORK SLIGHTLY FASTER
• Minimum of 25Gb free space on Start-Up hard disk
• No other programs running in BackGround e.g. Energy-Saver
• Don’t let HD spin down or be turned off (in Energy-Save)
• Move hard disks that are not to be used to Trash - To be disconnected/turned off
• Goto Spotlight and set the rest of them under Integrity (not to be scanned)
• Set screen-saver to a folder without any photo - then make an active corner (up right for me) and set
pointer to this - turns on screen saver - to show that it has nothing to show
Yours Bengt W

Will stacks show in pic's when burning a dvd?

Hi all, just wanted to know if the stacks in my pic's will show when burning a dvd. When I fix red-eye or auto smart fix it shows the stacks on my pic's. I don't want the stacks to show when burning the pic's on a dvd.
Thanks, alot

> When I fix red-eye or auto smart fix it shows the stacks on my pic's
My guess is that what you are referring to as "stacks" is the icon superimposed on the thumbnail to show that this photo is part of a Version Set. This icon is present over the thumbnail, but it is not in the photo itself. No, it will not show on the photo file that is burned to a DVD.
You did an auto red-eye and an auto smart-fix. These create Version Sets where they save the file of your fixed photo separate from the original photo file so that your original is preserved.
I think my description answers Colin's question of "what do you mean by stacks showing?" If not, tell us what you did mean.
Then please do answer the question of specifically how you plan to Burn the DVD.
Barb O

FCPX: changing the resolution preferences when burning a dvd?

FCPX: How do you change the resolution preferences from 720 to 1080 when burning a dvd?

DVD standard is 720X480, which is why you don't have a resolution choice.
Russ

How can I increase resolution when burning a dvd with elements 11 premiere

How can I increase resolution when burning a dvd with elements 11 premiere
I am trying to generate a slide show DVD....the pictures on the TV are poor quality

Welcome to the forum.
As Steve points out, a DVD-Video is set in resolution, to 720 x 480 (for NTSC), in either Standard 4:3, or Widescreen 16:9. That is as good as it can get, and is not a limitation of PrE, but of the DVD-Video specs, which were written a long time ago.
The best that one can get is to play that DVD-Video on an up-rezzing DVD player, or most BD players, that also have up-rezzing, to an HD TV monitor. Those players have dedicated chips, JUST for up-rezzing.
Then, and per Peru Bob's questions, I attain the ultimate Still Images to DVD-Video, by doing my Scaling in Photoshop, and using either the Bicubic Sharper, or Bicubic Smoother Scaling algorithms. I Scale my Camera RAW Images to match my Project's Frame Size, and Crop, where necessary to match the Aspect Ratio of my Images, to the Aspect Ratio of the Project, i.e. if going to a 16:9 Widescreen, I will lose some pixels top and bottom, but I account for that, per my asesthetic.
Note: some PrE users insist that the Scaling in PrE is as good as Photoshop's, but my critical eyes point to using PS. Also, I do NOT use JPEG, which is a lossy, compressed format, and will Save_As PSD from Photoshop, for ultimate quality.
Good luck, and please let us know the pixel x pixel dimensions of your Images.
Hunt

When burning a DVD from Elements 13, it freezes at 90%

when burning a DVD in elements 13, it freezes at 90% and locks up elements until I cancel burn.

Jerry Jarrett
If you wish to pursue your question about burn to disc, then I would be glad for the opportunity to be of assistance.
The following would be my troubleshooting strategy and questions
1. What computer operating system is your Premiere Elements 13 running on?
2. Have you looked at the issue with and without the Intel HD Graphics 2000 and Higher preferences disabled
(See Edit Menu/Preferences/General)?
3. Where are you in Publish+Share/Disc/, DVD, AVCHD, or Blu-ray? And, what does the burn dialog's Quality Area
show for Space Required and Bitrate? What brand/type/capacity disc are you using?
4. Is the issue specific to one Timeline in one project? Or, is the problem there with another Timeline content and another
project.
I would prefer to see you sort out the burn to disc issue if possible because of the download problems associated with the 3rd party software
that is typically needed to obtain the disc product from the Premiere Elements VIDEO_TS, BDMV, or ISO Image. Excellent 3rd party software if you
can get it installed without a lot of companion garbage. Although how to have been described for the safest possible download and install, there
are no guarantees that you will not be hit with a lot of computer cleanup just to get one excellent program.
ATR

When Burning a DVD from IDVD it does not encode Video

I am having trouble burning a DVD that will not freeze. All of them come out and are read by DVD players of all kinds, but it gets about 3 minutes into the video, and it freezes. I saved as Image to Disk, and it went through the Burning process flawlessly and played through in its entire contents, but then when I tried to burn it to a DVD, it made the menus fine, but when it came to encoding the video, it skipped that part and went straight to encoding audio and it did not work. It came out with just a little video on there, but it did not use the same process as the Save Disc to Image did. When I saved Disc to Image it played through the whole project in kind of a slow motion. The Burning to a DVD did not do that at all.
Please HELP!

I do not have 20gb free on my start up drive. I will once I delete the bulk of the project. How can I save the project to make sure that when I delete the big project, the parts that I have edited and want to not get deleted?
As for my Imovie, It is a 22 minute long home video that does include 5 chapter markers, including the one that starts the movie from the begining. There is music for every clip from my itunes. The theme i chose is the first one listed on the list. It starts in from the right side, and then scrolls across at the top. All of the menus work fine when i play my burned DVD. In fact, everything works fine except for that one part when it freezes up.
I do not understand what you mean by adding my movie to a drop zone and not to the background. The way i started it on Idvd was by clicking, create an Idvd from the menu on imovie.
I made a new step of progress and i got the encoding of the video, but it still did not work. It froze at 3:03 instead of 3:27, 3:38, or any of the others. This is the second disk i have made though that will play on my Powerbook. It freezes on everything else though.

[nForce] no audio on disk or image when burning a dvd movie

i've recently bought a K7N2 Delta I lsr and since i've had this i have never been able to burn a dvd movie no matter what i try. I've started from scratch trying with just the AC-97 audio drivers installed and downloaded the latest nforce audio drivers from nvida website, nomatter what i do i cant get a movie on disk correctly. When i build an image on my harddrive, i play it and theres no audio and when i build a dvd disk either the audio wont play or the entire disk wont play. my dvd player either says disk cannot be played or the disk is dirty. But when i import the image or disk into dvd shrink the film plays fine with audio. I'm at a total loss. i dont think that my processor has anything to do with it but i have an AMD Athlon 3200+ and 512meg 3200 Geil ram. If anybody has any ideas or better still a solution i would greatly appreciate a reply.. Thankx for your reply in advance...

Hello SON!
Recently bought, you say. Does that mean you have installed all mobo drivers, repair installed Windows, etc?
Have you tried the disks in another system?
Do you use the same software for playing and recording?
I don't think this is it, I think it is a software/driver problem, but two quick ones:
Untic in Device Manager for the optical device "Recognise insertion", as that can ruin a burn.
Remove the audio cable if you got one between the optical device and the sound card.

Audio soundtrack won't play when burn to DVD or save to a file! HELP!

When I edit and playback a video project, the soundtrack plays back fine. But when I burn to DVD or export to a file, the soundtrack is silent. It DOES still play audiotracks that are from the original video footage, but it won't play the soundtrack song that I added to the video. I have this problem only when I make a HD version. The sountrack source file is in standard WAV format (44.1 khz). The project settings include:
Editing mode HDV 1080i
Timebase 29.97 frames/sec
Video frame size 1440x1080
Thank you for your help!!!

Glad that it worked.
As to why the Fixed Soundtrack sometimes has issues, I haven't a clue. What version of PrE are you working on?
Several users have reported issues with both the Fixed Soundtrack, and Narration Tracks, not working properly, but those cases seem to be Project specific, in that when the same users use those Fixed Tracks, in other Projects, everything works fine. In every case, that I can recall, the "fix" has been to Move the Audio Clips to an empty "regular" Audio Track.
The issues seem to have cropped up in about PrE 7, and continued through PrE 9. Again, because the problems with those Tracks, seems to be Project related, it is tough to diagnose what the real "cause" is. To date, I do not recall anyone having the issues in PrE 10, but maybe no one has hit the right combo of criteria (we have never been able to nail down what those criteria are) in a Project, to cause the problems.
Wish that we could track the problem down to something specific, so we could just say, "Don't do that," but we do not know what "that" is. Until we do, we'll just keep recommending that users Move the Clips to another regular Audio Track.
Good luck,
Hunt

Audio dropped out when burned on DVD - PRE.

I have finished my movie on PRE 8 and burned it on a DVD in high quality. The problem is the background music works, but the audio from the videos is dropped out. When I play it on PRE 8, the audio works perfectly. The video and audio comes from a JVC Everio HDD. Everything works fine until I burn it.
I did not use Instant Movie or Audio Mixer because I did it manually.
Is there anything I need to do before I burn the DVD, or do I need special settings?
Another problem I have is that Organizer turns off and does not work.

Patrick,
You gave me an idea for two tests. They are simple and fairly quick and will not require any real editing in PrE, or another NLE.
Test 1:
From Export/Share, Export your movie. I think you are doing SD/DVD work, so choose DV-AVI. Export just the Video (checkbox for Video and Audio, and you want Video only). This will give you a silent Video-only file. Now, Export>Audio (choose PCM/WAV 48KHz 16-bit) to get an Audio-only file. Test this Audio-only file. Did you get both the AV's Audio and your Soundtrack? You should. Then, create a new Project to the right specs., and Import those two files. Note, your exact placement of the Audio-only file might not be on Audio Track 1, and just let it go to Audio Track 2. I'd not use Narration, or Soundtrack. Test. Burn to a DVD RW disc, so you do not create a coaster, and test again.
Test 2:
Do a Save_As, name and locate it. Delete your music from the Soundtrack. Export/Share the movie with both Audio & Video. Test. If things are working now, without the Soundtrack, I'd bring in your music, but try placing it on Audio Track 2. Test. Note: an alternative to this would be to do two Save_As Projects. In one, remove the AV's Audio completely, and then Share/Export just your Soundtrack as an Audio-only file. Choose the same PCM/WAV 48KHz 16-bit. Then Import that into the first Save_As, the one with no music. Again, try placing this file on Audio Track 2. Test.
I worry that maybe one, or both of the fixed Audio Tracks, Narration, and/or Soundtrack, is getting in the way. The above tests will be quick and should get you the results that you need, with what you have. The tests will also tell us if something is wrong with the Soundtrack Track, as it seems to be killing the AV's Audio on Audio Track 1.
Good luck, and please report,
Hunt

Trouble encoding audio when burning to dvd

Similar Messages

Maybe you are looking for