Trouble exporting as swf

So I went to Photoshop World in Boston and learned how with CS4, I can export our magazine as a flash file with interactive page curl, et al...
This was HUGE. It helped more than anything else to sell the upgrade from CS3 to CS4.
I even downloaded the trial to create a sample flash.
Now that we have the CS4 upgrade, I created a file once.
Ever since, when I try to create a swf, it goes through the entire export process and then at the end I get "File not exported"
Any clues?

OK, to update my situation, I have packaged the file so that all the links, fonts, etc. are consolidated, and I made it on my c: drive (as opposed to the external drive the file had been on - suggestion from Adobe) and now I keep getting an "out of memory" message, even after re-booting and opening only InDesign.
anyone?

Similar Messages

Trouble exporting to swf

Hi , I am using flash CS3 Pro, and i am having an odd
problem. First every other file i have made exports fine. I opened
my last site to make some minor changes in text and images and
after i saved it and went to publish it did not work. The file
directory is set as usual and nothing else changed except for some
additional text and a image swap so i can not figure out what is
going on PLEASE HELP !
I noticed that when i i press F12 and its in the process of
exporting the file will show up in the destination folder for about
2-3 seconds then disappear. It also wont preview export or publish.
Any ideas ???????

[branched to a new thread]
There's seldom any reason or benefit to exporting a SWF file directly from After Effects. Relatively few things are preserved as vectors (which is the main reason to export a SWF file). See this page for details.
There are several options for creating movies from After Effects that will play in Flash Player. See this section for more information.

Exporting an swf as an animated .gif the correct way?

I have read all kinds of posts on this, most are old from back in the early 00's. I have some flash banners that I made that need .gif back ups and I find myself pretty screwed if I can't do this. I tried exporting an .swf thru the publishing settings in Flash and no matter which setting I choose the gifs are pixelated and very bad quality. I just finished reading a post where it said to use the file - export from the menu which I did use and the quality is much better but nothing near acceptable for the client. I also read to export the swf to Quicktime and QT can convert to animated gif so while I look at that option is there someone that can point me in the right direction as this could spell trouble for me if I cannot come up with a solution as I have multiple swfs that need to go through Google analyctics and need the gif back ups.
thx
rder

After spending hours losing my hair finding an answer, I found that there is no answer. reality is that Flash (at least CS3) has an export to gif feature but this is a waste as the gifs are horrible quality. Publishing as is no better so that closes the door doing it that way, so on and on I went searching and saw a post that Quicktime can do this, so I publish as a QT file and then export QT file (in QT) as an image sequence. It worked but it delivers each frame so the longer file you have the more frames. Useless to me, so in 2009 as far as I see there is NO WAY you can convert an swf to an animated .gif if you are on a Mac. Go ahead and search for OS X swf to .gif and you will see tons of misleading adds and then when you open each you see they are all .exe files and you know what that means!
So, thank god I have a pc as well and found about 100 apps all kinds from freeware to sharewrae that will convert swfs to animated gifs (IF YOU HAVE A PC)
rdfer

Flash CS 5.5 - best settings when exporting to .swf to reach widest audience?

Hi Flash experts!
I am a 2D illustrator and am relatively new to Flash (and love it!) and want to add some simple Flash animations (using my illustration) to my portfolio website. But I am having issues when exporting to .swf - I have emailed on examples of work to friends and colleagues to view (and check) and most have trouble opening the .swf files. In fact most can't open them at all! Is this more to do with your average (probably a pc user) person not having an up to date Flash player or to do with my settings when exporting?
Can anyone advise me on how to best export to .swf to ensure the majority of people can open and play the file? Is this a problem just for a newby like me or a wider issue you Flash superstars deal with?
Eagerly awaiting your advice!
Thanks,
Lisa in New Zealand.

It may just be that they do not have a standalone Flash player to play the file. Your better bet is to plant the swf on a web page and send the link to the page instead of the file(s).

InDesign CC – problems to export a SWF

Hi,
can you help me, please?
I have a big job e-brochure with three alternative layouts.
One for MultiMedia interactive PDF, one for print and one for swf (intranet).
On CS 6, I did not have problems in the past to export all three data files.
Now, in CC I export a swf from alternative layout, but the program do not
create the folder "Ressorces". I have the swf file and html file but not the
folder Ressources with all movies included.
What am I doing wrong?
best regards,
Liljana
P.S.: excuse my bad english, I give me trouble.

Please try to reset the preferences of the application.
Following document will help you in order to reset the InDesign perefrences:
http://helpx.adobe.com/indesign/kb/indesign-preferences-support-file-locations.html

Can you export a SWF in photoshop CS5 or CS6?

I have a client that has provided me SWF files that swear were exported from Photoshop, I know that this could be done in earlier versions. if so then how can this be done in CS5 or CS6. I have access to both.

To my knowledge, the ability to export as .swf was removed after CS3. Do you know what version of Photoshop your client was using?
Here are some past threads regarding this topic:
http://forums.adobe.com/message/2986280?tstart=0
http://forums.adobe.com/message/4897912#4897912
http://forums.adobe.com/message/3239504#3239504
http://forums.adobe.com/message/2512325#2512325
You might also find some additional information by asking around the Photoshop General Discussion.
Cheers!
Kendall

Exporting to SWF

I'm new to AE, so forgive me if this is a dumb question. But I would really appreciate some help.
How can I convert 12 second .mov loop with transparency into a 15 second .swf with a transparent background for use in an Adobe Captivate project?
What I've tried so far has resulted in either a 12 second swf clip with transparency or a 15 second avi clip without transparency. As a newbie, I'm only using the trial version of AE for the moment. I realize it has limited codecs, so perhaps that's the problem. I think, however, it's far more likely that the problem is my limited knowledge.
Here's what I've tried (unsuccessfully) so far:
1. Created a new Composition with a Duration of 0;00;15;00 with a white background.
2. Imported my .mov file with a setting of Premultiplied Alpha Channel.
3. Brought 2 copies of the file to the stage and aligned them end-to-end on the timeline so that I filled the entire 15 seconds.
4. Exported as .swf.
This works great for giving me a transparent swf. However, the length is only 12 seconds--the length of the original clip. I can't get the full 15 seconds.
I've also tried rendering it as an .avi that I can convert to a flv or a swf. This works great for getting me the full 15 seconds, but not only does it not have transparancy but the flv causes problems within Adobe Captivate because of the way the program loads the clip.
What am I doing wrong?
Thanks for your help. I hope my explanation makes sense.
Dan

It sounds like you may have inadvertantly set your original clip to export and not your 15-second-long comp. If the comp is 15 seconds in length, the resulting export should be as well. Another thing to check would be to make sure your work area is the entire length of the comp.

Trouble Exporting to PDF

I am having trouble exporting one file to PDF. I try other indd files and they export prefectly fine. Just this one file. When I export it has the message "background task: Failed to export a PDF"
I try couple solution online that I find
1. Disable preflight and restart InDesign
2. Add the document to a new book and export from the book panel
The only think that I couldn't try is Disable background exporting.
I am having a little trouble there....I did create an empty ext file and save it as "DisableAsynExport.txt"
but I seem to have trouble going to the folder. It said that you need to go...
Mac: /Applications/Adobe InDesign CS5.5/Adobe InDesign CS5.5.app/Contents/MacOS/
When I got to Adobe InDesign CS5.5.app it opens the app instead of opening another folder... not sure if there is another way to open it.
So when I go to Mac: /Applications/Adobe InDesign CS5.5/
It has Adobe Indesign CS5.5.app, Configuration folder, Documentation folder, Fonts folder, Legal folder, Plug-Ins folder, Presets folder, Scripts folder and Uninstall Adobe InDesign CS5.5
So I have not clue where the Contents/MacOS is??
Would be best is someone can help me....
Thank you so much!!!

If it failed from a book, it won't matter if you disable background export becasue books don't use it.
See Adobe Community: File Crashing on Output - printing/PDF/other

Xcelsius 2008 FP2 won't export to swf

Hello,
I can not get Xcelsius to preview or export to swf. The progress bar labelled "Generating swft" displays for approximately 3-5 minutes until Xcelsius.exe finally crashes and the app closes. I'm running Xcelsius 2008 SP1 with FP2, Live Office XI R2 and Flash 10 (lastest version). I've also looked at the Flash security as described in other forum posts and that does not appear to be the issue.
The .xlf I'm working with was successfully completed and published to Crystalreports.com and is working fine. The problems began when two additional Live Office connections were added to allow for some additional data points in the next release of the dashboard. The data model now contains a few hundred more rows and a few hundred forumlas causing the Excel file to increase to just under 1MB. The total number of rows of data return in all Live Office connections combine are just over 1,000 rows. The max # rows setting in Xcelsius is set to 2,000. The formula cells added to the data model are fairly simple formulas that were successfully used in the data model previously (ISERROR, INDEX, MATCH).
On occasion, Xcelsius will give the message box "Your range has been reduced to the maximum rows allowed" before crashing.
Acting on this message I have removed the new Live Office connections, but the message/crashing continues. I have now scaled back the # of Live Office connections and # of formula cells way back to a very small number. the data model is now very small and quickly imports into Xcelsius yet the same message/crashing continues. I have verified that the data model currently in Xcelsius is the most recent, very small version of the data model, but Xcelsius still behaves like the large 1MB data model is present.
I don't know if this is even a # rows/data model size issue or a config/bug issue. Any suggestions would be most appreciated.
I've read the PDF on FP3, but don't see this scenario listed. Might FP3 help? I need to be FP3 is compatible with publishing swf files to Crystalreports.com which is a BOE XI R2 platform.

thanks for the quick advice. so we can scale back the data to within 512 rows by splitting this into 2 dashboards. Not ideal, but shouldl be acceptable.
The data is already pre-aggregated. The data sources for this data model are crystal reports that are published in Crystalreports.com and refreshed nightly against a 3rd party API. Virtually all of the formulas required in Excel are used to line up rows of data that are being pulled in from 2 seperate live office queries. All of the required data points could not be included in a single crystal report so 2 are needed and the rows matched up in Excel using an INDEX(MATCH) formula. We are not using any unsupported functions or VLOOKUP per the advice of an Xcelsius best practice document I located in this forum. I'm open to any suggestions on better techniques to align related rows of data from two seperate ranges in Excel so they essentially appear as though they came from a single data source.
I am starting to lean toward the # of formulas in the data model as being the issue and have added fitlers to the live office query to cut the # of rows to only 20% of what was originally being retrieved. The # of formulas were also reduced by the same percentage. However, when trying to preview or export to swf, Xcelsius still gives the same message that the range was reduced to the max allowed and then crashes. It's as if Xcelsius is still seeing the old data model. Perhaps something is being cached that isn't clearing out? Even a full remove and re-install of Xcelsius SP1, Live Office and FP2 has had no affect. Maybe we need to build a new .xlf from scratch?
thanks

Exporting to swf background problem

Hi all,
I've created an animation which has a black background (created a black solid), and then added new images on top of it.
The new images all had black backgrounds along with the actual object so using colourkey I removed the black of each images background so that the shape in the image only shows. (hope this all makes sense so far!)
now when i came to export the file to swf, i played it on a webpage and the black background mage does not show, its transparent, and the black background of each image which i removed with the colour key does show up!!
arghhhh please can someone help me asap!!!???
Thanks

First, why are you exporting as SWF from After Effects? That is only useful if you need to preserve vectors, and there are very few things that are preserved as vectors when exporting to SWF from After Effects. If you need a SWF animation, it's almost always better to create it in Flash. If you want to export your animations from After Effects to play in Flash, it's almost always best to render and export to F4V or FLV. See this page for information about alternatives for creating material from After Effects for Flash or Flash Player: "Rendering and exporting for Flash Professional or Flash Player".
Very often, when someone complains of something not appearing in a SWF file exported from After Effects, it's because they selected Ignore for the Unsupported Features setting. See "Render and export a composition as a SWF file".

Exporting to SWF: embed SWFs on pages?

Hi there
I've been experimenting with the export to SWF option in ID CS4. I was hoping I'd be able to place individual SWFs on each page of my ID document and then export the whole document as a sinlge SWF, giving me a nicely interactive publication. The SWFs that I've placed on the pages don't play in the final document, though.
Any ideas about fixing this?
I've looked at all the Movie Options for the SWFs that I've placed and the options available at export and nothing seems to have helped.
I'd appreciate any thoughts.

I was hoping to take advantage of InDesign's page transitions to present the SWFs, but it looks like I may have to work out how to do it all in Flash instead.
I do a lot of Flash work but have only briefly experimented with the ID exporter, so there could be something I'm missing. I'm guessing to get what you are after to work will be difficult depending on your ActionScript skills. Unfortunately when you export an fla, the fla does not include the transition code—your pages get placed sequentially on the timeline with no transitions. There is the bitmap representation of the swf and it wouldn't take much to load your swfs into position, but you'll have to build your own page flip transitions.

Exporting to SWF, keeping same page formats

Hi,
I have an InDesign document, in CS5, with different page spreads. They're all A4 double spreads except for two of the pages. One is A4 portrait on its own and on is landscape.
When I export to swf, those pages turn into double page spreads which means I end up having what looks like a blank page next to my single page.
Is there any way of keeping different page sizes when exporting to SWF?
Thanks in advance,
ZoeByDesign

No there´s not. InDesign exports your SWF by using the size of the largest spread in your document. Smaller spreads or pages will be exported to that size as well, extra space filled with white...
I suggest you to change the size of those single pages to match the size of other spreads (A4 portrait > A3 landscape) and fill the empty space as you like in InDesign instead of letting SWF exporter use white color. If you want it to look like it´s single page, fill the emtpy space with same color you have as a background in your html-wrapper file.
Check this sample (coverpage is actually a spread, but the left side is filled with same grey that has been used as a background):
http://www.edocker.com/_demo/edocker-online-demo/index.html

Exporting to SWF - interactive indesign documents

Hi guys,
Ok so I have been playing around again with the idea of producing some interactive wire frames using indesign and exporting to swf. I have a global nav at the top that is working just fine. I also have some links futher down the page, and that's where the problem is.
Let's say I have a link called 'Map' half way down the page. It's a long page around 4000 px. So let's say the 'Map' link 2000 px down the page. When I click on the link it takes be to the map page, but postions me at 2000 pixles down the page. Not at the top of the page where I want to be.
I have had a play around with the Zoom drop down but I am not having any success.
I don't want to export to pdf as I want to be able to set target pages for the links with in indesign, and not have to mess around in acrobat after (potentialy This document will have a tonne of pages).
Anyone got any ideas (please)
Dan

Hello, thank you. I have chosen flash text. Which has sorted the fuzzyness...so big tha
nk you. !! The text has now converted to times new roman?
..any suggestions as to how i keep the text chosen when working in indesign file?
Sorry..im a newbie!

Export as SWF

Hi I am having an issue with exporting CS5 .indd as SWF.
I want to create an e-book with placed SWF Media that is exported as SWF and includes Page Curl.
I have set the placed SWF media to play on page load, poster is standard, and export settings, Interactivity and Media include all.
Problem is the placed SWF does not play on page load, you can see an object that when clicked then plays the placed SWF.
I need this to play on page load, really appreciate some help!! Many Thanks Paul

Hi, I know why! I forgot to mention that I also had a sound object mp3 added to the page. If I remove this the SWF plays and exports correctly.
Does this mean you can only have one media object on a page? Be Good to know, thanks Paul

Indesign CS4 - Export to SWF and font issue

Hello,
How do you embed a font in an Indesign CS4 document when you are going to export it to an SWF file?
I have an Indesign CS4 document that uses a particular font. This document is then exported to an SWF file which is then uploaded in our intranet website. When users view the internal website, the SWF font uses a different font like Times New Romans. I do not get this issue because I have the particular font used in that document installed on my machine.
Are there any work arounds for this issue other than distributing the font used in that exported SWF file?

InDesign should embedd fonts by default when exported to swf... may be you have some protected font in use? do you have problems with other fonts too? Quick and dirty workaround is convert your text to outlines... not good one but fast...

Trouble exporting as swf

Similar Messages

Maybe you are looking for