Trouble exporting for surround sound

I have the 6 files in my timeline as provided by the audio facility. I export each file seperatley then assign the proper speakers in Compressor. After this it still doesnt sound right.
I've been reading on the fourm and the manual but I'm still unclear as to the audio output settings for my sequence. I've tried setting to 6 outputs in both "dual mono" and "stereo". Am I missing a step or setting somewhere? Can someone give a step by step?

Hey guys, thanks for taking the time...
By saying it doesn't sound right, it seems liek the mix was off. I think initialy I exported out of FCP wrong. First off, I exported as a QT movie (audio only) and I think each of the six channels was a stereo mix, which made it sound basically mono.
I called the audio engineer to confirm the speaker selection. Then last night I exported each individual channel as an .aif , ending up with six .aif files.. Then assigned the proper speaker assignments in compressor (import Surround sound group). I then encoded with the 5.1 compressor setting. I wasnt able to play it yet because it was 2am...the wife wouldn't ahve appreciated that .
Does this sound like a proper workflow?

Similar Messages

Using ATV2/3 with non-HDMI Receiver and theater projector and also need iTunes downloaded movies to work. I'm thinking to use the Toslink digital out for surround sound and an HDMI to RGB converter for video but not sure the iTunes DRM will prevent?

I have a theater with a Runco projector but non HDMI. alas, my receiver is non HDMI. Changing electronics and projector is a non-starter.
I would like to be able to buy HD movies on iTunes and watch them by streaming via Apple TV3. My plan is to capture surround sound from the TosLink digital out, which my preamp/receiver can handle. For the video, I need to convert the HDMI to RGB component to feed my receiver.
This is where iTunes DRM and HDCP issues might arise. I am under the impression that I need an non-HDMI compliant converter so that ATV3 can even talk to my receiver. It is my understanding that this is possible and takes care of the HDCP issue. But what about the DRM issue? All I want to do is buy and watch HD movies, no bad intentions. I find it incredible that iit might not be possible.
Anyways, is there a 100% certain approach even if it costs up to $300-400. Again, changing hardware is a non-starter so please avoid the obvious "buy an HDMI amp and projector".
Thanks

I have a theater with a Runco projector but non HDMI. alas, my receiver is non HDMI. Changing electronics and projector is a non-starter.
I would like to be able to buy HD movies on iTunes and watch them by streaming via Apple TV3. My plan is to capture surround sound from the TosLink digital out, which my preamp/receiver can handle. For the video, I need to convert the HDMI to RGB component to feed my receiver.
This is where iTunes DRM and HDCP issues might arise. I am under the impression that I need an non-HDMI compliant converter so that ATV3 can even talk to my receiver. It is my understanding that this is possible and takes care of the HDCP issue. But what about the DRM issue? All I want to do is buy and watch HD movies, no bad intentions. I find it incredible that iit might not be possible.
Anyways, is there a 100% certain approach even if it costs up to $300-400. Again, changing hardware is a non-starter so please avoid the obvious "buy an HDMI amp and projector".
Thanks

Looking for surround sound

I have a set of 5.1 speakers for my computer, but I am only getting stereo sound from the Front L/R and Sub channels when listening to music(mp3's). I've read this is because this format is for stereo sound only and so it won't play on the other channels.
So I was looking into getting the Creative DDTS Decoder. This should ouput any sound from my computer and other devices to full surround sound right? Is there any alternative to this? I would think that there are sound cards out there that would do this, I have an older model Soundblaster Live! series card currently. Any help with my situation?

Hey thanks for the replies!
Through the Creative AutoUpdate check (and using the model # SB000) it looks like I have the Creative Sound Blaster Live! 5.1 card. I just did an upgrade installing the Sound Blaster Live! package, but that did not include the Playcenter app that nvidiot was referring to.
Should I download the Playcenter download for Creative Sound Blaster Live! cards (ver 3.02.70) to find this CMSS option?

Soundcard for surround sound

I have a G5 tower, I didn't get a seperate sound card for it, but would I need one in order to design a soundtrack to be 5.1?
I want to map certain sound clips to front, back, sub, etc. can I do thise without a 3rd party soundcard or do I need something else, (does STP) even handle surround sound mapping?

STP doesn't support surround sound actually. There's some workarounds, particularly using buses but it's not very elegant. Hopefully, the next version of Soundtrack Pro will include that because surround sound is the future of post-prod.
If you want do to surround sound now, you could check Logic Pro, altough it's a bit overkill for your needs; or Digital Performer, altough it's CPU-hungry.
Of course, you will need an audio interface with multi-outs, I'd suggest you check the Focusrite Saffire. You will also need a surround monitor system, if you don't want to spend too much, you could check some M-Audio speakers. I'd rather use Mackie 624 but they're not in the same price range!

How can I export a surround sound movie file using compressor?

I want to create movie files using Motion and Soundtrack Pro that have surround sound. I can make ac3 surround sound files in SOundtrack Pro, I can add them to projects in Final Cut Pro, but I can't see any way to use Compressor to output the movie files with surround sound. The encoding results in plain stereo files. Please help.

HI Tony, you should be able to do this simply within the Compressor.app V4.1.x using the "surround Sound Group" and the shipped setting DOLBY DIGITAL setting. Instead of just adding a file, you need to:
Add a "Surround Sound Group" (control++i or file/add surround sound group or use the "+" plus sign at bottom left corner of Current/BATCH window". You'll get a pane with the channels you need to manipulate.
Click on the tracks Icons L to Rs and select the surround tracks as prompted and navigate through the finder interface. .. simple. WAV, BWF etc
Optionally Add the video object from here too.
Select the BATCH job (top layer with the ORBIT looking icon)) and use the INSPECTOR (right pane) to see what audio objects have been selected and verify location etc.. follow the dialogue (follow your nose)
Then Select the SETTING layer and use the default DOLBY DIGITAL setting and form the "settings/Create Blu Ray/Dolby Digital" and drag it over the batch job setting
Select this and adjust the LOCATION for the target distribution
Select the INSPECTOR AUDIO pane (right pane) and adjust any settings and EFFECTS to your taste.
select the cluster (if one is defined)
+B (submit) the job for the distribution or another master.
This will work fine.. pretty easy.. You'll need to work the audio settings as you like. If you get stuck, use the compressor.app V4.1 help.. its actually good.
Post your results for others to see.
Warwick
Hong Kong

Setting Up Cable Box for Surround Sound

I have a Pace Set Top box, the T-7900 speakers and the Audigy 2 ZS.
The Pace box has a left and right output and a digital optical output. Is there anyway of setting up this system to enable surround sound?
I could obtain a 3.5mm converter to connect the L and R to the wired remote. If I used the CMSS 3D feature of the Audigy would the sound then be in surround?
I hope this is understandable!
Feel free to suggest any alternative setups that could work.
Thanks!

You'd have to have the Y-adapter input into the Audigy to use the CMSS, I think. Inputting it through the T7700 line-in will have it play stereo.

I want to export a video file with 6 mono track for surround sound and the 7th track to be stereo.

I want to give my friend a video file, so when he imports it into avid, premiere, final cut etc. he would recieve 6 mono tracks (L,R,C,LE,Ls,Rs) and the last one to be stereo. but every time i export it comes as 7 mono tracks. and in the setting thats the only option

i think you would have to go with 8 mono tracks, 6 for the 5.1 mix and 2 more for the stereo. that or try to use 4 stereo pairs, but that would combine parts of the 6 mono (5.1 mix).
The Video Road – Multichannel Audio in Premiere Pro

Pioneer AV Receiver connection for surround sound

How would I be able to setup for a 5.1 sound output from the iMac to a pioneer AV receiver? I am only getting a 2.1 output always. I used to play the same video with a 5.1 output from a PC. However, am not able to do the same with my new iMac (late 2010 model). I connected my iMac from the miniDisplay port to the receiver using a HDMI adapter.

Well as of now since the macbooks dont have HDMI, the way to get the best quality audio is over optical.
Head over to www.monoprice.com and search there for the best deals on high quality cables.
What you want is a mini-toslink to regular toslink cable.
here is a link for a 12ft one for $3 plus shipping.
http://www.monoprice.com/products/product.asp?cid=102&cp_id=10229&cs_id=1022902&pid=1558&seq=1&format=1#largeimage

Trouble exporting for Dreamweaver, nothing interactive worked...

I was so excited to learn about Fireworks' great features, and have a task of building a website... all on my own for the first time.
In Fireworks, I managed to lay out a page and built buttons and had some pop up menus working. Everything looked great in the "preview in browser" and all. But when trying to export it to Dreamweaver, i got some disturbing messages, and i don't know what to do now.
first message:
"Only slice images from the current state will be included in this export. Hotspot and behavior attributes will be ignored."
and then
file Machintosh HD: Applications: Adobe Fireworks CS4: Configuration: HTML Code: CssLayers.htt, line 1401, error: test for equality(==) mistyped as assignment (=)?
Assuming equality test
Can someone please help me? I am so discouraged!
thanks.

Hey there!
If you are new to Web site creation, then here is an excellent tutorial for you to work though:
http://www.sitepoint.com/article/html-css-beginners-guide/
Sitepoint also has good reference pages for HTML and CSS. Actually...tons of good stuff!
Another good site is HTML Dog: http://www.htmldog.com/
For books, I have the first edition of this book: http://www.sitepoint.com/books/css2/ and it's a good one.
I also recommend http://www.cookwood.com/html6ed/ (Although, once again, I'm a version behind current. )
HTML is a way of marking up a document into text elements, such as paragraphs, headings, and lists. If you're used to InDesign, you may think (even unconsciously) that you can use Fireworks or Dreamweaver as a document layout tool for the Web. You can't, really. HTML is markup, not layout. You can't make HTML and CSS do what you can do with InDesign without a fair bit of experience pushing HTML and CSS into doing things they aren't necessarily intended to do. Before you can do that, you need to understand what they are intended to do.
Also, while Fireworks can export HTML, its code is only intended to be used for mockups. The code isn't robust and you can't add content to it very well without making the structure break. The pop-up menus are quite troublesome. Fireworks code is also very ugly and difficult to maintain - when something goes wrong, you need to be able to dig in and fix it. It's easier when you have clean code. The better approach is to use Fireworks to create your design graphically, make slices to export the sections of that design that need to be images, then build your site in Dreamweaver or a text editor. In order to do that, you should understand HTML and CSS.
Yes, you can overlap things on Web pages. Again, however, you would need to understand how CSS works, because you would use CSS positioning on an element to overlap it with something else and there are tricks and bugs (due to browser variations) that you would need to master before you wanted to attempt such a thing. Start with the SitePoint tutorial. Once you can build a site like that, then move forward.
You'll need to learn about CSS floats: http://www.smashingmagazine.com/2007/05/01/css-float-theory-things-you-should-know/ (tons of good stuff at Smashing Magazine) and http://www.autisticcuckoo.net/archive.php?id=2004/12/10/floating
and CSS positioning: http://www.barelyfitz.com/screencast/html-training/css/positioning/
Good luck!

Uncaught exception on a 2hr+ surround sound export

Hi,
I've just encountered an error message for the first time exporting a surround sound AIFF. "Uncaught exception" has been popping up repeatedly during the export of a 2hr 26 min soundtrack that's taking 45 minutes to process, annoying 6 mins from the end of processing. Accepting the dialogue, Soundtrack promptly quits/crashes. I've tried all the preference/cache/etc removal. Also have 36GB of disc space.
Interestingly, I did two tests of 20 min exports from the front and end of the project (where I assume the error message was being generated) and these short exports worked fine.
Is there a time limit on multitrack exports from Soundtrack Pro (Max 2hrs?)

I understand your frustration. But to be clear, Mark, this is not a limitation of STP. It is a limitation of all aif files, so it wouldn't matter what program you were trying to create the file in, you would still get some kind of error. No DAW manual I've ever seen, including that of ProTools and Digital Performer, has mentioned this limitation that I know of.
Hope things are working out for you now!
- Matt

Change Default Surround Sound Audio Mapping

Anyone know if there is a way to change the default surround sound audio mapping in Premiere CS6?
For example, when working with six mono channels being sent to a 5.1 submix. I manually set where each of the six go (front left, front right, center, lfe, rear left, rear right). Then I route that 5.1 submix to go to a stereo submix so that I can hear the downmixed audio in my laptop speakers. When my project is exported to a video file, I turn off the last step of routing the 5.1 submix to the stereo submix, so the file has all six channels of audio in their proper place. When I change the 5.1 submix to feed the master output, I get the option to re-select where each surround element should end up in the master output. In our production facility, we have surround in the order I mentioned previously. I noticed that Premiere has the front, then rears, and then center and lfe listed. It is annoying to have to re-select my surround preferences everytime I switch between monitoring the stereo downmix and the surround output.
Any way to change what Premiere sees as the proper order for surround sound channels? I know there's the audio option to change mapping, but when working on a laptop, you only get the left and right speaker, no surround settings there.

that's tied into our entire facility audio spec, and every video file we have would have to change audio mapping, in addition to re-wiring a lot of air-chain devices.
In broadcasting, it seems like it's more common to do surround sound the way we're doing it: L, R, C, LFE, Ls, Rs. I understand why some might want to do it another way, which is why it would be nice to be able to change it and leave it a certain way. I know I can submit a feature request, I'm just trying to find out if anyone knows how to do it already.

5.1 surround sound with X-Fi XtremeMusic c

I am trying to get my X-Fi XtremeMusic card set up correctly for surround sound and having a bit of trouble. I have a Logitech X-540 speaker set (5 channels + sub.) Perhaps I don't understand how to set this up correctly - I am using the CMSS-3D tab, with the Upmix Mode set to Stereo Surround, Upmix: set to Auto. The slider is set at the recommended 50% mark. When I click on the speakers in the bottom half of the display, the voice comes mostly from the front speakers for both the front and rear speaker on each side. If I move the slider to about 80%, the voice sounds to be coming from right beside me for both the front and rear speaker, so that would be balanced. However, shouldn't each sound come from only one speaker? "Front left" - just that speaker? "Rear left" - just from the rear speaker? What do I need to change to make sure things are set up correctly?

The sound card has surround capabilities, but it is the ASIO drivers that provide PPro with access to those facilities. I didn't see a mention of ASIO on the product page, but a shot in the dark would be to see if there are updated drivers on the Creative Labs Web site.
Cheers
Eddie
Forum FAQ
Premiere Pro Wiki
- Over 300 frequently answered questions
- Over 100 free tutorials
- Maintained by editors like
you

Guide : Getting 5.1 surround sound. Audigy 2

Hi all
I thought I would write up a really quick but effecti've and simple guide for owners of the Audigy2 ZS and seeing how its Xmas time, I can assume a few lucky boys and girls may have this awesome card under the tree.
Most of whats covered should work with all creative products.
(Sorry, but I WILL NOT cover any info regarding encoding media or the like that will conflict with copyright laws)
This guide is for setting up your Creative Audigy 2 ZS for surround sound 5. reproduction and information in regards to required Filters/Codecs. I have not included any advanced set up options or the like as the ZS with the set ups I have incluced here will cover it out of the box.
One of the most common issues people may have with 5. not fuctioning correctly while playing a DVD movie ( Mpeg ) or any multi channel media that is 5. encoded, has to do with Codecs/Filters.
Most media players will not decode all AC3filters/Mpeg, thus require extra filters/codecs/plugins to be installed.
Ok , the first thing to do is ensure your sound card and speakers are set up correctly.
Most common speaker sets have 3 plugs that go in the back of your card .
EG, Logitech X-530. Pink = Front Centre.Black = Rear left and right. Green = Front left and right.
Ensure they are in the correct place and are tightly fitted.Ensure your sound card is secure and tightly in place.Make sure your speaker cables are tidy and not a big tangled mess.
Ensure in device audio controls that SPDIF passthrough is NOT ticked as this is for optical output ( the ZS pro with rack fuction )
Update to the latest drivers an media source ap
ps.
A few little things to set up first in Creative Mixer Control Panel to ensure cleaner sound:
Lower Master and Wav volume in Creative mixer to about 90% as to avoid any over dri've disstortion.Lower Master Bass Volume to about 90% to avoid over powering the bass.Ensure that your speaker settings Windows control panel and Creative speaker settings match your speaker set up..
Also run the THX Speaker Callibration test in basic mode.
YOU SHOULD DISSABLE CMSS IN EAX CP IN ORDER TO GET 5. TO FUCTION AS IT SHOULD.
CMSS is to be use only for a MONO or STEREO source/signal. It is for sending the stereo/mono signal ( left and right) to all speakers. This is not 5., mearly it is the same signal sent to all speakers to give you a more rich and vivid sound reproduction of an other wise flat source.
Turn off any EAX FX.
Things you want to do to ensure stable use:
SHUT DOWN CTHELPER:
A background task that is a plug-in manager for Creative drivers. A 3rd party manufacturer can use the CTHELPER plug-in interface to produce drivers, add-on features, and fixes that will integrate with a tighter fit with Creative?s sound drivers and utilities. Gi'ven its purpose CTHELPER would normally be classified as a "leave alone" background task. It also allows Creative speaker setup to be synchronized with Windows Control Panel speaker setting. Without it running that check box in Creative speaker setting is not functional (settings are not in sync). Unfortunately there are often problems with CTHELPER, most notably that it can use 00% of CPU time so it's best left disabled unless you REALLY need it .
Type in run "msconfig" and shut down all Creative Start up entries. Infact its proberly best to shut everything down.
NOTE: Any essentinal Software for the proper fuction of devices ,Eg: Razer mouse utils should be left on.
Simple Bios settings to help improve audio and stablity:
Dissable Pallette Snoop.ANY AND ALL shadows for devices, EG VGA BIOS and system bios should be dissabled. If you have the setting for PCI latency in your bios ( AGP boards only ) set it to 64, if its already at 64 try 32 .
Shut down ( remove, reconmended ) any 3rd party tweak apps that run in the background.
EG, Cache Man and any monitoring software.
Ok, now for Filters/Codecs and Plugins.
A major required Filter is AC3. (ac3filter__0a_rc5)
AC3Filter - it is DirectShow filter for AC3 decoding to play AVI with AC3 audio tracks and MPEG2 (DVD). Required for WMP.
NOTE: If you have DVD software that should play encoded 5. then make sure you have any updates/patches for the player installed and go through the tools/options for the player and ensure its setup correctly to decode AC3filters in the applictions tools menu.
If you use Cyberlink Power DVD you may need to pay an extra fee to get the required AC3filter/MPEG2 decoders to fuction as all 5. sound settings may be greyed out on some dated versions.
InterVideo WIN DVD ( this software suit comes with most "Asus" if not all makes of Mainboards. This suit comes complete with the required codecs/filters so get full surrport for 5. - 6. - 7. out of the box. Note: you must set it up first under audio options as it defualts to 2..
If you use WMP0 you should download and install the AC3filter or get the latest XP codec/filters packs. With out these filters you may not get 5. sound and/or poor reproduction.
Supported file types:
The following table lists the file types (formats) supported by Windows Media Player .(For files type played by Power DVD or WIN DVD please refer to the makers website or read me file for a detailed list).
File type (format) File name extension .
Music CD Playback (CD audio) .cda Audio Interchange File Format (AIFF) .aif, .aifc, and .aiff Windows Media audio and video files .asf, .asx, .wax, .wm, .wma, .wmd, .wmp, .wmv, .wmx, .wpl, and .wvx Windows audio and video files .avi and .wav Windows Media Player skins .wmz Moving Picture Experts Group (MPEG) .mpeg, .mpg, .mv, .mp2, .mpa, .mpe, .mp2v*, and .mpv2 Musical Instrument Digital Interface (MIDI) .mid, .midi, and .rmi AU (UNIX) .au and .snd MP3 .mp3 and .m3u DVD video .vob Macromedia Flash .swf Microsoft Recorded TV Show .dvr-ms*
NOTE: WMP defualts to 2.. To enable 5. run WMP0. Click on tools then point to options. Navigate to DVD then open up the advanced window. In here is everything you need to set things up.
NOTE: If you mess things up simply return to defult settings and start over.
Some common errors you may encounter with WMP.
Error messages are identified by numerical IDs, such as C00D0BC2 and 800704CF. You can determine the ID of a specific error message by clicking the More Information or Web Help button on the error message when you encounter it. The resulting page will indicate the error ID.
: Error's C00D6A and C00D9A while playing DVD's or MPEG-2 content.
This is directly related to either your current video card drivers or the MPEG-2/DVD decoder you have installed (EG: PowerDVD, Win DVD etc ). Reinstalling and/or uninstalling the MPEG-2/DVD decoder (PowerDVD, Win DVD ) and/or video drivers should fix the problem for you.
You should now be able to re-install you decoder ( Power DVD etc ) and continue its use.
Erro : C00DAC:
Cannot play the file Windows Media Player cannot play the protected file because there is a problem with your sound device, such as a sound card or sound controller. You might encounter this error message for one of the following reasons.
Your sound device requires an updated driver. ( update driver )
The selected sound device does not support Secure Audio Path (SAP).
If you have multiple sound devices installed on your computer, try using a different one.
To use a different sound device, on the Tools menu, click Options, and then click the Devices tab. Double-click Speakers, audio device to use, click a different device.
Error : "divide error in module IVIAUDIO.AX at".
Only exists in systems that have various Sound Blaster Li've sound cards and WinDVD installed.
This is infact a compatibility problem between these products. The problem is realized when MP3 oriented applications call upon certain sound card services making it look as though the error was raised from within the application in question.
FIX:Uninstall WIN DVD. Reinstall WMP and AC3 filter and then reinstall DVD WIN.
A simple but rare issue.
ModName.Win DVD "msvcrt.dll" and/or Win DVD MFC application error.
FIX:
Uninstall any java filters. Macromedia and Macromedia Acti'veX.
( to remove Acti'veX go to C:\WINDOWS\Downloaded Program Files and delete the Acti'veX )
What are codecs Codecs/Filters.
Codec stands for Coder/Decoder. Basically it is a piece of software or a driver that adds a support for certain video/audio format for your operating system. With codec, your system recognizes the format the codec is built for and allows you to play the audio/video file (=decode) or in some cases, to change another audio/video file into that format (=(en)code).
For example, when you install Windows to your home computer, Windows installs automatically most commonly used codecs into the system, so you don't have to download them separately from their vendors. However there are some codecs that are widely used, but not installed by Windows. Most notably DivX , MPEG-2.
Get all the Codecs/Filters/Plugins you could ever need from:
http://www.free-codecs.com/AC3_Filter_download.htm (ac3filter__0a_rc5)
http://www.free-codecs.com/
NOTE: ( XviD-.0.3-2022004 for Divx ) Stand alone codec for playing Divx instead of the Divx full install.
http://www.microsoft.com/windows/win...0/default.aspx
Ok, you now should be all set.
However Codecs/Filters/Plugins are like any other kind of software installed and things can go wrong. If things are not working as they should try the following.
Download and install "Gspot"
http://gspot.headbands.com/download.htmlBuild 0307 - 23 KB Run the programme and simply point to system and select "List Codecs and other Filters"
Its a no brainer really to know whats what here and how to use it to find out the source of the issue, if you have one. If its red, its bad so you then need to trace the Filter/Codec to its source and remove it.
Here is just one very simple excample you may encounter and how it was fixed.
If you have ffdshow file is missing error pop up while running a player application, first go to C:\WINDOWS\system32 and search for ffdshow.en. Its proberly not here though. If it is just leave it be.
NOTE: ffdshow is used for AVI/Xvid enc/dec source.
To fix this "ffdshow Video Codec file is missing " error Simply uninstall your Xvid codec or your entire DivX programme, or any other Filter/Codec you have installed for playback of DivX files and AVI Video Files.
(Some times it seems a few Codecs/Filters dont get along so you must be aware of what you install).
Cheak "Gspot" again and Filter should be removed from the list.
Now you can reinstall the Xvid filter "XviD-.0.3-2022004" or your desired DivX programme.
Now go back toC:\WINDOWS\system32 and search for ffdshow.en. It should be there if it was not before. If the issue is back try a different version of required Filter.
So, thats just excample of a simple fix that got everything working again. Its not to hard to find out what the problem Codec/Filter is and then its just a case of uninstalling it. You can re-install the Codec/Filter but you should double cheak with "Gspot" and ensure the issue has not repeated itself .
If it has you can try and find out if the issue is related to another type filter causing a conflict or use an alternate Filter/Codec that will perform the same task .
Search for an updated version of required the Codec/Filter also.
Ok, thats pretty much the basics in getting correct and stable 5. sound working the way it should with your new Creative Audigy 2 ZS sound card.
I hope this has been of help.
Regards,xmn.
Message Edited by xmn on 2-24-2005 08:02 PM
Message Edited by xmn on 2-24-2005 08:04 PM
Message Edited by xmn on 2-24-2005 08:05 PM
Message Edited by xmn on 2-24-2005 08:05 PM
Message Edited by xmn on 2-24-2005 08:09 PM
Message Edited by xmn on 2-24-2005 09:29 PM
Message Edited by xmn on 2-26-2005 03:07 PM

BUMP, just incase its been missed by a new board member

How to get Surround Sound to work With Itunes 7 and Stop Skipping

A common problem for surround sound with itunes 7 appears to come from Creative sound cards. The way to fix this problem is to right click on the volume icon in the taskbar and open the EAX Console. Open the CMSS 3D tab and check the box that says Enable CMSS 3D and set both CMSS and CMSS2 to 0% in the stereo focus slider. It should work. Remember to have the volume slider in itunes at 100%.
If that doesn't work then open the quicktime preferences in the controlpanel/quicktime. Then go to the audio tab, uncheck the safe mode box. Set the rate to 64 kHz and the size to 16 bit. Then set the channels to 5.1
This should all make it work, after hours of struggling i've found these successful settings and am loving it!
For those of you who have sound skipping during transitions----
Go to the preferences of Itunes and go to the Playback tab, disable the crossfading between songs and you should play skip free!!!!

bump

ITunes and surround sound internet streams

Hi all,
I'm looking to broadcast internet streams in surround sound and I want to select an audio codec which iTunes will play.
Does anyone know which surround audio codecs are supported for internet streaming?
Best regards,
Daren.

Thanks for your reply Dave.
I had suspected that this was the case. I've been exprimenting with iTunes and haven't even been able to receive a stereo AAC stream. AAC and AAC+ only seem to be supported for files and not internet streams.
If anyone disagrees, please feel free to correct me.
Does anyone know if there are plans to support AAC and AAC+ in internet streams? ..and in particular for surround sound broadcasts?
Best regards,
Daren.

Trouble exporting for surround sound

Similar Messages

Maybe you are looking for