Trouble exporting graphic with gradient

Hi,
I need to make a lower third bar that goes from blue at 100% opacity to 0% opacity. The problem is when I export it as a QT file the black background is exported with it. How can I just export the bar?
Many thanks
Rod

when exporting the project you have to change in the export preset from "DV NTSC Movie" to "Lossless+Alpha Movie", and the the black background is no more tahn an alpha channel now... taht neans you have the black rendered trasparent
hope that helps...

Similar Messages

Trouble exporting pdf with Arabic text to .doc file

I am having an issue exporting a pdf from the trial of Acrobat Pro XI on a Windows 7 computer.
The pdf has a table with English fields in the left column and Arabic equivalents in the right column.
It appears to display fine within Acrobat, so I assume it has fonts embedded and that Acrobat is somehow handling the display of the Arabic font correctly.
I need to export this to .doc or .docx so that I can enter additional data.
When I convert to .doc, the English column and fields convert pretty good, but the Arabic fields do not display well at all. I am not sure if this is some sort of trouble with Word (or the Windows OS) requiring an Arabic font or Arabic text support to be installed on the system or if there is some other issue (such as Acrobat not handling the conversion well)??.
I did note that there is an Arabic Font add on to Acrobat that can be downloaded from Here:
http://www.adobe.com/support/downloads/thankyou.jsp?ftpID=4885&fileID=4558
However, since Acrobat is seeming to properly display the Arabic text, I don't know that this is required...additionally when I tried to install the Arabic font support from that URL, it told me that Acrobat X was require, I am using Acrobat XI reader (installed with the trial version of Acrobat pro that I wish to purchase if I can get this working properly).
Thanks in advance for any assistance or advice offered on this subject.
David Dean

Unfortunately our conversion engine cannot convert text, such as Arabic, which reads from right to left. It maybe something that we add in the future however it is not available at this time.
Please refer to the article mentioned below : http://forums.adobe.com/docs/DOC-1812
~Pranav

Trouble Exporting movie with Media Encoder, weird clip sizes and errors

I'm using Premiere Pro CS4 on a Windows XP Professional with 2gb RAM and 1.6GHz. I'm trying to export a short movie (2.5 minutes) with no audio. It is just a bunch of stitched together videos imported from 1280x 1024. I'm sizing them into 720 x 480. I get very poor video quality unless I use uncompressed formats, so I am using an Uncompressed AVI with UYVY Codec and 1.0 square pixels.
1st problem: I get an error running more than around 35-50seconds:
The Operation was interrupted by user
- Source File: C:\DOCUME~1\imurphy\LOCALS~1\Temp...
- Output File: C:\Documents and Settings\imurphy\My Documents...
- Preset Used: Custom
- Video: 720x480, 25 [fps], Progressive, Quality 100
- Audio:
- Bitrate:
- Encoding Time: 00:05:03
7/15/2009 1:18:56 PM : Encoding Failed
Error compiling movie.
Unknown error.
Its very consistent with having this error. I'm pretty sure there is plenty of room for the files, it only gets up to around 2.5gb. I can watch the movie up to where the error occurs and there is no problem.
2nd: I tried spliting the video up into 4 different files and the last clip won't match the others. I export all of them the same way, with 1.0 aspect ratio and the first 3 come out saying .9091NTSC. The last one will say it is 1.0 ratio if I do it the same way or 0.9091 NTSC if I change it, but either way, it will come out wider that the other clips (they will all still have black space on sides).

Read through these documents:
http://kb2.adobe.com/cps/332/332331.html
http://premierepro.wikia.com/wiki/Error:Error_compiling_movie
-Jeff

Final Cut Pro X export troubles: exports video with only half the audio.

Ever since I updated Final Cut Pro X, I've been having problems exporting. I either get error messages or the audio doesn't fully export. When I tried exporting a master file to my desktop, I got a message saying “error occurred when creating frame” then lists the frame number. Someone suggested copying the project file and pasting it into a new project. I did that, and it exported without the error popping up; but halfway through the video, the audio disappears, and does so in the same spot it disappeared in a previous youtube export before I tried the copy/paste method. I don't have the original footage; I'm making color correction changes to an edit; so I'm not sure if the second half of the video is somehow corrupted, don't know how to check that, and not sure what to do if it is.
Another suggestion given to me was to delete the event my footage is in, then create a new event, re-upload all the footage into that one, and relink my project files to it. He also said don't delete my event and project folder at the same time, which I'm not even sure how you simultaneously delete two things on a laptop. I don't understand how this method would work though, since deleting the event makes my project disappear since it has nothing to link to. I'm scared to try this method since I don't want to lose my work; I really don't want to color correct it all over again.
Is there any way to successfully export the file suitable for youtube posting, or is this a bug in the system they haven't fixed yet?

Just turned off background rendering.
I'm not certain what you mean for specs in a specific point in the video, but here are the specs for the entire edit I initially received:
Dimensions: 1920 X 1080
Codecs: H.264, AAC, Timecode
2 Audio Channels
Total bit rate: 12,083
Size: 951,735,770 bytes (951.7 MB on disk)
Here are the specs for the exported video that has the audio issue:
Dimensions: 1920 X 1080
Codecs: H.264, AAC, Timecode
2 Audio Channels
Total bit rate: 12,274
Size: 966,817,082 bytes (966.8 MB on disk)
The video is 10:28 minutes long and the audio leaves at 5:57.
If that wasn't what you were looking for, just let me know. I'm not very good with technical stuff sometimes so may have misunderstood.
Is there something I should have done to the piece before I began color correcting it, like transcoding?

I am having trouble exporting photos with a watermark in lightroom 5 with windows 8

I click export, then edit watermarks, make my adjustments, click create, then export...photo gets exported without the watermark....what am I doing wrong?

Just a couple of observations that may not be of any help to you. After you click on the export button, you won't see any activity on the Lightroom interface unless you are exploring several images in which case you will see a progress bar in the upper left-hand corner of the screen. I noticed on your export settings that you have checked the option to add the exported image to the catalog, so it isn't going to automatically show up in Lightroom. You might try right clicking on the folder you are working with and choose to synchronize it and see if that will bring in those newly exported images.

Export graphic with the application

I notice on some sample application I have installed, it say do you want to install support objects or something to that affect.
How can I attach the graphic to the application export so that when I install it somewhere else I don't have to do it seporatly.

Doug,
If the images are in the Shared Components > Images and specified for that application, then you can create a export file by going to Home > Application Builder > Application XXX > Export/Import > Export > Images (tab). You can then add that file to your Supporting Objects Installation Scripts. Then when you export the application, that install script will be included.
Regards,
Dan
http://danielmcghan.us
http://sourceforge.net/projects/tapigen

Trouble exporting photos with correct size

I took some pictures of a friends daughter for her senior pictures and the school has very specific size requirements for photos submitted. They state they have to be 2.5" high and 2.0" Wide and 300 resolution.
I set these dimensions in the export box under image sizing but when I go back to check the size after export it isn't correct. The width came over correct but the height comes over at 1.976". I've tried checking and unchecking the box "don't enlarge" and I get the same result.
I did crop the original photo.

Without seeing the photo, there's no way for us to tell. It may be you need to take another head shot with more "space" around it so the crop will work. Wedding photographers do this all the time, their initial photo has lots of unneeded "space" around the subject so that they can crop at various different aspect ratios.

Exported graphics with text from Illustrator - text is very fuzzy

I am creating graphics in Adobe Illustrator CS3 on a Mac running OSX. The graphics consist of a pie chart and extra explanatory text below it. I do not have the option of doing the text part in another program.
When I exported as a jpg, put the graphic into Dreamweaver, and then put it onto the web, the text was fuzzy. When I used the Save to Web options, it was even fuzzier.
I use the default settings for both the jpg export and the Save to Web (gif and jpg) because I'm not sure what they all mean.
Any help would be appreciated.
Thank you.

Jacob,
I looked at anti-aliasing and it was already checked for everything I've tried. I looked at the Save for Web gif file settings, and am not sure I understand what you are suggesting. Transparency has been checked for everything I've done. No dither is selected for the setting under that (rather than Diffusion, Pattern, or Noise Transparency Dither) - I don't know what that means.
I tried both jpg and gif using Save as for the Web. For jpg, I used maximum resolution, Progressive and ICCProfile were not checked, optimized is checked, quality at 100, blur at 0, matte is empty, and under Image Size, anti-aliasing and proportions settings are both checked and clip to artboard is not.
For gif, I used mostly defaults: selective, diffusion, transparency checked, No transparency dither (as mentioned), interlaced is not checked, image size anti-aliasing is checked and clip to artboard is not. Lossy is 0, colors 256, dither 100%, matte is blank, Amt 10% is grayed out and unchangeable, and web snap 0%. I don't even know what most of that is for.
When I did all of this, the images were more fuzzy than the one where I just exported from Illustrator as a jpg, which is also too fuzzy.
The only thing that comes to mind immediately is would this work better if all of the text were changed to outlines? And does anything else come to you that I may have not done?
Also, just in case you see my screen name, I changed it in between my post and this reply. msbnbb and Early Music Lover are both me.
Thanks for your help,
Marcy

Trouble exporting with QuickTime 7 to UNCOMPRESSED 10-bit 4:2:2

I have succeeded with shorter videos, but my 90 minute video returns "error -2125".
Somehow I managed to do this before, I'm not sure what has changed on my system. Does anyone else have trouble exporting to Uncompressed 10-bit 4:2:2 ? I'm now exporting to ProRes instead, but would prefer uncompressed video for the sake of quality.

You don't say what's the source of your clips.
If standard DV (..though I doubt that an agency would accept standard def video any more..) NTSC DV is compressed in the camera as 4:1:1, and PAL DV is compressed as 4:2:0 ..so you won't get true 4:2:2 from normal DV, unless you're using a broadcast camera (..probably feeding into the capture device via SDI inputs).
If the source was tape-based HDV or any other hi-def source, then iMovie converts that, during import, into Apple Intermediate Codec, and wouldn't be able to output proper Uncompressed 4:2:2 material.
For Uncompressed 4:2:2, I think you'll need to be using a dedicated capture card - and massive-capacity hard discs! - to be able to import the material in the first place.
iMovie certainly isn't the program to handle pro video of this nature.
Ask in the Final Cut Pro Discussions..
"..I've also tried doing this on my Macbook with Intel processor.." ..but maybe that's just not fast enough (older Mac portables have "shared graphics memory" ..meaning their graphics processor may have to compete with the main processor to temporarily grab free RAM)!

Help export the graphic with transparent background and not braking the quality

hi I'd like some help please if its possible.
I've created a monitor graphic in Fireworks that looks like iMac and I would like to export it with transparent background.
the jpeg format looks great with no damage to the graphic at all but I can't have transparent background, although I changed the canvas fill to none. the png-8 format can apply transparent background, but damages the graphic.
Here are the previews
1st - the png-8 format
2nd - thejpeg format
A ny ideas on how I can export the graphic with transparent background and not braking the quality??

Fireworks questions are best answered at this link:
<http://forums.adobe.com/community/fireworks/fireworks_general>
Good luck.

Trouble Exporting with DeNoiser

I'm having trouble exporting using DeNoiser in premiere. It's playing back fine in Premiere but after being rendered/exported the transitions buzz a bit.

Hi John, I was able to find a solution:
http://forums.adobe.com/message/5385287
look what the member "11. abrapiro14" wrote. It worked for me.

Trouble exporting with QT conversion

Hey all-
When I export using QT conversion, choosing the LAN/Intranet option, the export takes a couple hours and the product is, for lack of better a explination, "herky-jerky." Like there are frames dropped in it.
Most of the media in the original project suddenly went offline, and I can't find or reconnect it. Thankfully, I was able to export a full quality version just prior to this happening. So I'm just taking that file, importing it into FCE, and exporting it with the conversion. Which is assume is a fine solution. All rendered and mixed-down. Any suggestions?
I have FCE 4.0 and QT 7.6.

You should have edited your video in a Timeline that reflects the codec used in the original material.
Export a QuickTime movie using "Current Settings". No recompression or conversion.
The movie can be Self Contained or a Reference Movie.
Bring that file into Compressor. Choose a DVD Preset that fits your movie. For instance, Best Quality 90 Minutes if your movie is less than 90 minutes long. Click on "All" and delete the AIFF audio file from Compressor. Click on Submit. Wait.
Bring the m2v and ac3 files into DVD Studio Pro. Author and burn your DVD.
Alternative: Bring the exported movie from FCP into DVD SP and let the encoding take place there instead of in Compressor. Or as David suggests above, Export Using Compressor. Note that this will lock up FCP for the duration of the encoding.

Videos export with purple/green artifacts/splotches/flashes with Media Encoder CC but export fine with Premiere Pro CC?

I use Premiere Pro CC to edit videos, and videos render fine when I export through Premiere Pro, but when I try to use Media Encoder CC, the video exports with weird splotches of green/purple artifacts all throughout. It almost looks like the video is glitching and having a seizure of green and purple. No idea why this happens. Could anybody help me? I use Media Encoder to export bulks of videos at a time through its queue feature, which is why I prefer to use Media Encoder for video exporting.
Please and thanks.
Specs:
Motherboard: MSI® Z87-G45 Gaming [Red on Black color] 2x SLI/CrossFire
Processor: Intel® Core™ i7 4770K 3.5GHz/3.9GHz Turbo 8MB L3 Cache HD 4600
Memory: 16GB Corsair® Vengeance™ DDR3-1600 1.5V (2x8GB)
Graphics and GPGPU Accelerator: AMD R9 295x2
Power Supply: 1300W EVGA
Operating System: Microsoft Windows 7 Home Premium 64-bit

Mitch,
I was hoping that you and others might have some insight as to whether the purple and green artifacts / splotches seen in the attached screenshots (taken from 4 consecutive frames here but occurring through the entirety of the clip) could possibly have resulted from exporting video with ~ Premiere Pro CS5 or 6 ? As seen below, these splotches alternate back and forth between purple and green in every consecutive frame. I was also hoping that someone might know if this is a relatively common type of artifact and how it is caused.

Exporting DXF with Coordinates Illustrator to CAD program

Hi,
I often have to export graphics from Illustrator CS5 for use in Catia or Pro Engineer.
Usually, if it's a graphic I have made myself, all I do is drag the 0,0 on my rulers to the position on the artwork where I require the coordinate system to be placed in the DXF file and that's fine.
However, recently I have received files from other sources which need to be converted from a PDF to a DXF for use in my CAD programs and I am having difficulty relocating the coordinate system to the desired location.
For instance, if I convert the PDF to DXF without moving my 0,0 location on my rulers, sometimes the coordinate system is top left or bottom left of the artboard the PDF has been imported into Illy on. (It varies file to file). So I figured that if I move the 0,0 location of my rulers to where I want the coordinate system to appear, that should work because it usually does so in artwork I create. But it always gets overwritten. The only way I can counter this is to assume that the coordinate system is bang-on the corner of the artboard and move all my artwork to the corner and then convert the file to DXF.
I guess my question is, for those of you who have a similar task to do, is this the only way I can relocate the coordinate system (by moving the artwork to the corner, which seems a bit dodgy cos it's all on assumption) or is there a more accurate way to do so.
Thanks in advance.
Sonya

I o not know if that is the only way but I will point out the reason you might be seeing 0,0 either at the to left or lower left is that in Cs 5 it has been change to the top left i CS 4 and earlier it was the bottom left, so depending on what version it was created from it might change this for you as well a way of changing this for you is to ask from them to save the file as an ai fie first in a version that is CS or earlier than make that a pdf.
Or what might be easier is to live with it until everyone changes to CS 5 or later?
Or make it a symbol and use the orientation proxy in the symbols options to select the orientation you desire.

Exporting Graphical Message Mapping in PI 7.1

Hi All,
In XI3.0 there was an option to export graphical message mapping by using ctrl+shift on the data flow editor window. Can't find the same in PI7.1.
Have SAP removed this feature with PI 71 or provided another way of doing it or simply my system is acting wierd?
Regards,
Rahul

It worked when I did Ctrl+Shift and numerical 0 from horizontal numbers of my keyboard, some how doesn't work with numbers on right side of the keyboard(Numlock was On)
It is wierd.

Trouble exporting graphic with gradient

Similar Messages

Maybe you are looking for