Trouble exporting/sharing part of the video

I do:
create a new iMovie project,
select and copy part of a video clip from the Event Browser (e.g. 30 seconds -long piece out of 3 minutes -long video),
paste that piece into the created project,
Share --> Export Movie, or Share --> YouTube (or whatever).
The problem:
The whole original video is exported or published on YouTube instead of the small piece of it which I have selected and put into the project.
If I play the copied/pasted fragment inside the project, it has the duration which I need.
Also (that is likely an obvious consequence of the first problem), the audio/video edits I do on the selected video fragment in the project do not end up in the exported/published video.
It looks like iMovie simply takes the original video from the Event Browser and exports/publishes it, bypassing the project altogether.
Either I am doing something wrong, or this is a bug.
Please help.
Thanks.

update:
the problem with keeping various Adjustments and edits in the exported/shared video (e.g. clip trims, equalizer adjustments, etc.) may be an intermittent one.
I suspect, it is related to working with "iPhoto Videos".
if you have encountered the same problem as described above, please share your experience.

Similar Messages

How do i transfer a video back onto my iPhone in the Photo app where it originally was and can be shared from (NOT the video app)

I have a video that i originally took using my iphone but then transfered to my PC. I want to put it back onto my iPhone in the photo app (NOT video app) so i can share it straight from my phone.
Since one of the iphone updates enabled the volume button as a camera shutter button and i was shooting the video one handed, i held the camera with the volume buttons on top. Unfortunatly, the phone still saves it in such a way that only the iphone and itunes recognize the proper orientation intended and when it's opened with any other device or program, it automatically makes the part of the video that's against the smooth side of the phone always the top side (regardless of if that makes the video sideways or upside down). I was able to get the video back onto my phone as a "video" where it shows up in the video app as a "movie" and there are no options to share via text, email, youtube (which were options when the video was still in the photo app). I need to be able to share the video with family

Have you transferred photos from your computer to your iPhone which is selected under the Photos tab for your iPhone sync preferences with iTunes?
If so, you can place this video in the folder of photos on your computer that is selected to be transferred to your iPhone via the iTunes sync process. Under the Photos tab for your iPhone sync preferences with iTunes, select Include Videos.

I have some videos that are completely well shown when using any media player, but some parts of the video appear with red screens when I try to edit them on Adobe Premier. Does anyone knows the reason?

I have some videos that are completely well shown when using any media player, but some parts of the video appear with red screens when I try to edit them on Adobe Premier. Does anyone knows the reason?

More information needed for someone to help... please click below and provide the requested information
-PPro Information FAQ http://forums.adobe.com/message/4200840
Plus, EXACTLY what are you editing?
Codec & Format information, with 2 links inside for you to read http://forums.adobe.com/thread/1270588
Report back with the codec details of your file, use the programs below... A screen shot works well to SHOW people what you are doing
http://forums.adobe.com/thread/592070?tstart=30 for screen shot instructions
Free programs to get file information for PC/Mac http://mediaarea.net/en/MediaInfo/Download

When playing movie in project window it cuts part of the video screen

I purchased Call Recorder for Skype to record my girls violin lesson over skype with their teacher in Bermuda. Now I need to cut certain parts of the video so we can play it during practice .. I don’t want to play the entire video. I had the Record Video set to "Two Track (Advanced)". I imported the recorded .mov file into iMovie. Then I skimmed the video and selected the part that I am interested in and dragged it to the project window. Now when I play the movie in the event browser, it plays the movie as I would like to side by side. However when I play the segment that I selected in the project window, it cuts 1/2 of each window which is not what I want as I would like to able to play this clip showing both the teacher and the student. What do I need to do???? Help!!!!! Thanks!

Hi Runa,
There are a couple of things you need to check. Firstly, click on the small gear icon at the start of the clip (segment). Select "Cropping, Ken Burns and Rotation" from the pop-up menu. In the top left corner of the Viewer, click on "Fit".
Secondly, in iMovie's menu go to File>Project Properties. In the window that opens select the "Timing" tab. For the items "Initial Photo Placement" and "Initial Video Placement" select "Fit in Frame".
You may need to follow only the second suggestion, as this may fix the whole project for you. Otherwise, use the first suggestion for each of the clips (segments) in your project.
Also, in the Project Properties General tab ensure that you have set the correct Aspect Ratio for your project, that is, Widescreen (16:9) or Standard (4:3).
John

Exporting only part of the Sequence

I do not have any in and out points on my sequence, but when I export, only part of the sequence exports. I have chosen numerous encoding presets, tried placing in and out points at the beginning and end, but it still does not work.

I've tried exporting through DV NTSC and DVCPRO720p60.
Say if I had a 10 minute sequence, then it'd only export 3/4th of it.

I am wondering how to zoom into a video in iMovie '09. For example I want to zoom into a certain part of the video. Is there any way to do this???

I am wondering how to zoom into a video in iMovie '09. For example I want to
zoom into a certain part of the video. Is there any way to do this???

Yes.
If you want to see the zoom, use the Rotate, Crop, Ken Burns Tool and select the Ken Burns effect. You can set the starting and ending rectangle for your zoom.
If you want to go directly to the zoom, use the Rotate, Crop, KenBurns Tool and select Crop. Set the rectangle to be where you want the zoom.

PE10:How can I limit a transition to just part of the video

I want to limit the page peel transition to affect the portion of the video screen that depicts a screen showing a slide presentation. The slide show does not show up on the video, so I have to overlay the screen with images from the slide show & want the transitions to affects just that part of the screen.
I can’t seem to limit the transition with a matte.

Great news!
That is sort of like the workflow in PrPro, where one would create a Sequence (think of a mini-Project, in a Project), then edit with the desired Transition, and then Nest that Sequence into a new one, where the PiP would be created from it. In PrE, there are no Sequences, so no Nesting, but you got around that by editing in a Project, then Exporting/Sharing, to then Import into another Project. More than one way to "skin a cat."
Steve G. always has some great workflow modifications, to get most things to work in PrE. Those suggestions are always greatly appreciated.
Good luck,
Hunt

How to play with part of the video.??

I mean that how can I separate the video to several parts,(maybe 2 frames to one part). and then How to play one part of them with JMF.
I want to use this to implement the p2p system. If I can solove there two issues, I think I can use some routing arithmetic to transfer some parts to peers. The peer with one thread just play the current frame, and create another one to download the following parts.
could you guys suggest me ??

Yeah, I do p2p with jmf.
In p2p system, the souce of video send the parts to the network(earch part has a UID,such as 1,2,3,4,5...), and the other computers receive some of them.(the parts must can play continuously) .And in the memery of each computer have a buffer to download the following parts from the network, not from the source.
In this way, some peers of the network can communicate.For example,
Peer A have the 1st ,3rd,5th parts,and Peer B have the 2nd,4th parts.
When A paly the 1st part, at the same A download from B the 2nd part, Then A can play in turn. In the same way B can download the 3rd part from A.
Maybe my way is not right, do you have another way to implement the p2p, or the materail about it.
Waiting for your replay....

When I export to QT movie, the video on a slide doesn't play and no playbac

I have a .mov file as content on one of my slides. when i play the file within keynote it works beautifully. the video plays as directed (either on click or automatically, depending how i set it up), and when the mouse hovers over the movie you get playback controls. When i export the presentation to QT, it no longer works. HELP!! i need to send thsi file out and now it looks like i'll have to spend all night recreating it in with a different application!
I have checked the box for embedding teh movie files. not sure what else to do.
Any suggestions??
Thanks much

ok -- i think i get it now:
it can't be set to Hyperlinks only (as that disabled the automatic playing of hte video, and it didn't recognize the 'click to play' option either).
and there's no controls for playback at all.
looks like if i want to give it the look of a still image that will play on click, i actually need one page with only the image and a link to 'play video' which actually takes you to a different page with the video that automatically begins to play (at least i'll try that next.)
thank you very much

Covering up part of the video (microphone dips into frame)

Sorry for such a basic question, but I can't seem to find the answer anywhere when I google it. I'm hoping you guys can help.
I'm editing a video right now where a SMALL portion of the microphone dips into the frame, and I'm trying to find a way to cheat covering it up. It's against a cream-white wall, so I can easily copy another part of the wall to put on top of it. Would anyone know how to do this?
Thanks a lot.

Thanks a lot for the info on garbage mattes. I am trying it out right now, but well, I'm a newbie at this. This video is the most I've been able to see on this effect: http://www.youtube.com/watch?v=3AjACk9LYd0
However, it does not say how to move the "good part" of the wall to layer it right on top of the spot where the mic is. Would there be any other tutorial online that could teach me how to do this?
Thanks very very much for all the help.

When watching a video, it will only play the beginning part of the video and not the entire thing.

I've made sure i've updated my plugins and made sure my graphics drivers are all up to date. I'm running windows 7, & firefox 24. I've noticed ever since firefox came out with a new version of the browser, i'm not able to watch an entire video online. (mtv, hulu, etc.) it only lets me view just the beginning portion of it, then it stops playing and at the bottem of the video it says "the video will return shortly" but never plays again. I do however am able to see an entire video on youtube. Any suggestion on how to solve the problem i am having. I know its not the website because ive used a different browser and i'm able to view an entire video online.

If you use extensions (Firefox/Tools > Add-ons > Extensions) that can block content (e.g. Adblock Plus, NoScript, Flash Block, Ghostery) then make sure that such extensions aren't blocking content.
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe Mode start window.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
Also make sure that your security software isn't blocking the videos or otherwise interfering.

I have an Iphone 4. I have a video I took with the built in camera. Is there a way I can edit it to isolate a part of the video that I can print a single frame?

I am looking fo someone who can tell me how to edit a video taken with my Iphone 4 so i can copy/print a single frame from that video rather than the entire video. Thanks in advance

What you can do is play back the video in the Photos app, then pause it. Tap the screen to make the controls go away. Then you can take a screenshot: Quickly press then release the home and power buttons at the same time.

Voices are off in part of the video

When I upload my video, the sound is delayed in the middle section of the video, but normal at the beginning and end. I tried selecting all and optomizing the video to full size, and that usually works, but not this time. Also it is the first time that just one section of the video's sound is off. Anyone have any suggestions??

Hi again
We have found if we convert the video to .flv first, it imports fine - it's only a problem with .mp4. Is there anything we can do to fix this? We want to use .mp4 as we also publish the videos separately and it's a more portable format.
Thanks
Sarah.

AVi produced by PP media export won't play the video part on my Windows Media Player, Why?

It's basically it - So when I find my exported file in its folder and try to play it by double clicking on it, My default player (WMP) all I get is the sound, It take quite a while before loading and then I get the usual white music note symbol on a bluish background and as the file is executed I only get the sound. But if I import it on my PP cs4 time line it's ok.

Thanks here too Jim. Does this then mean I have to use UYVY because this is the only other choice on the Settings window? Anyway I'll give it a try, and report. MM
Wow! I edit this to come back and say a big Thank You. not only it plays correctly but it seems tons faster to encode! I had no idea and left it to what seemed to be the default. What can i say! I wonder if I can change the Settings default to UYVY?

I installed Safari 7.1. Now YouTube videos have a bad font for all the interface text that is part of the video embed.

Since installing Safari 7.1, all the text in YouTube videos (title, resolution, etc.) is all little font error boxes and therefore completely unreadable. Nothing else is having this problem, just the text that is in the embedded videos themselves.
Any suggestions?

What I did (in this order) was, set YouTube to HTML 5, bring Flash up to date, fontrestore, clean font cache with Fusion, reboot.
So far it has now remained fixed for me. I have Mavericks and it is up to date.
by ‘fontrestore’ I mean
sudo fontrestore default
in terminal as described on http://apple.stackexchange.com/questions/113107/how-to-restore-default-fonts-on- mavericks
fontrestore removed some of my fonts from my System and Library, but I moved them all back in on the theory that I might want to add fonts, but was not looking to remove them.
I don’t know which of these steps solved the problem. All I know is what I did and what the result was for me. As always, use ‘sudo’ at your own risk.

Trouble exporting/sharing part of the video

Similar Messages

Maybe you are looking for