Trouble exporting: "the requested export operation cannot be performed"

I've been exporting different sequences (from the same project) using the same same settings all week but now suddenly when I try to export a sequence I keep getting the message: "the requested export operation cannot be performed". I have not changed any settings that I can think of and am really puzzled as to why FCP won't let me export. Also I keep getting a lot of "general error" messages while klicking in the timeline of the sequence. At first I thought it had something to do with too little hard disk space, but surely 380 GB should be plenty? Could it have to do with too little memory (running imac 3.06 GHz, 2GB memory)? Seems strange if it's a memory issue as I've been able to export all my other sequences using the same settings.
I'm exporting HDV 1080i footage to HD h264.
Any advice much appreciated!

First, do you have any cmyk graphics?
Second, in my workflow, I almost always export from fcp with sequence settings and then do the compression in compressor. You might try that.
2gigs is not alot of memeory. You might try copying JUST your sequence to a new project and trying to export with just the new project open. Also, do you have plenty of hard disk space available on your startup drive. This is crucial as OSX swaps out memory to your startup drive when it runs out of ram.

Similar Messages

You cannot export the request at the movement -while releasing the request

Hi.. Experts
Today, we had message from our functional consultant that When he is trying to release the TRANSPORT REQUEST (not tasks) he is getting the error " You cannot export the request at the movement "
After 2 / 3 hours, we discovered file exists in Transport Profiel directory
" /usr/sap/trans/bin" directory Fine Name : T_OFF.ALL
After removing that file - The request releasing were happening normally.
In this juncture, Even though the issue is fixed ,
We would like to learn how this file got created and which transactions / which configurations will create this T_OFF.ALL file and stops all Transport releases
Thanks in advance
Rgds
PR

This file T_OFF.ALL has to be created manually in the bin directory to basically stop release of any transport request from all systems. No transaction creates it .
Please go through the links to get more info on this mechanism.
[is there something like NOIMPORT.<SID> but with exception list;
[http://help.sap.com/saphelp_40b/helpdata/fr/3d/ad5ad84ebc11d182bf0000e829fbfe/content.htm]

Beasrv.exe The requested operation cannot be performed on a file with a use

Hi guys,
I am trying to upgrade WLS from 10.3.3 to 10.3.5
But I got the following:
Fatal error occurring during the installation. beasrv.exe(The requested operation cannot be performed on a file with a user-mapped section open).
I search in taskmgr this proccess but it does not here.
Also restart the server and nothing. And also unzip again the patch to another folder and it does not work.
Any help guys?
Thanks in advance

Do you have a node manager (or WebLogic server) installed as a service?
These should be visible in the task manager as beasvc.exe.
To check if there are services installed, open your service environment and look for the entries
such as: Oracle WebLogic NodeManager or beasvc domain_name.

Ui5 - eclipse "the requested operation cannot be performed "

Hey all, I have get the "the requested operation cannot be performed on a file with a user-mapped section open" when i tried to save the my ui5 works on eclipse after i close all sessions about the related sources. After app. 5 min later, it fixed.

it seems that there is no exact solution about the issue, i thought that this is about the apache session of the related application, apache thought that the session still on going although i ended it. it is a generic problem as i thought when i google it. hope that i can find an exact solution. Thanks mike.

PS CS5 error message, "The requested operation cannot be performed..."

When trying to save an image under the "save for web & devices" I get this error message, "The requested operation cannot be performed on a file with a user-mapped section open." I have the latest driver on my computer. For a while I would get this message now and then, now it is all the time.

I have this problem too. It only affects Photoshop. It doesn't happen every time I try to save for web, but it happens on all kinds of files, even new files that I have created from scratch in Photoshop. Sometimes, all I have to do is create a new file and click save for web, and I get the error.
It doesn't happen if I turn off my Antivirus program - Trend Micro Titanium Maximum Security.
So I would think it was a problem with Trend Micro, but it doesn't occur with any other program and I can save files with Photoshop, unless I use the Save For Web option.

Error processing cube - requested operation cannot be performed on a file with a user-mapped section open

Hi,
We have recently moved our production servers and since the move have been experiencing an intermittent (but frequent) error when processing our OLAP cube.
The error messages presented are:
"Error: The following error occurred during a file operation: The requested operation cannot be performed on a file with a user-mapped section open"
"Error: Errors in the OLAP storage engine: An error occurred while processing index for the <Partition Name> partition of the <Measure Group Name> measure group of the <Cube Name> cube from the <Database Name> database"
I assume the second message is a consequence of the first error. The partitions and measure groups seem to vary each time the process is run.
It appears from similar threads that this is usually caused by backups or anti-virus applications locking the files that Analysis Services is using the process the cube. I have ensured that there are no backups running at the time of processing and
I have disabled anti-virus programs without success.
I have also created a new version of the cube (using the deployment wizard) which deployed without error but then encountered the same error when processing for a second time. There was nothing (client application wise) using this cube when it failed
to process.
As I mentioned earlier, this problem is intermittent. Sometimes the cube will successfully process but usually it fails to process.
We have not encountered this error in our previous production environment or in any of our development environments.
Has anyone encountered this problem before? Any suggestions on possible solutions?
Thanks
Rich

Hi jonesri,
I think you can try to use SSAS Dynamic Management View to monitor SSAS instance, such as existing connections and sessions. For example, please run the following MDX query:
SELECT[SESSION_COMMAND_COUNT],
[SESSION_CONNECTION_ID],
[SESSION_CPU_TIME_MS],
[SESSION_CURRENT_DATABASE],
[SESSION_ELAPSED_TIME_MS],
[SESSION_ID],
[SESSION_IDLE_TIME_MS],
[SESSION_LAST_COMMAND],
[SESSION_LAST_COMMAND_CPU_TIME_MS],
[SESSION_LAST_COMMAND_ELAPSED_TIME_MS],
[SESSION_LAST_COMMAND_END_TIME],
[SESSION_LAST_COMMAND_START_TIME],
[SESSION_PROPERTIES],[SESSION_READ_KB],
[SESSION_READS],[SESSION_SPID],
[SESSION_START_TIME],[SESSION_STATUS],
[SESSION_USED_MEMORY],
[SESSION_USER_NAME],
[SESSION_WRITE_KB],
[SESSION_WRITES]
FROM $SYSTEM.DISCOVER_SESSIONS
Use Dynamic Management Views (DMVs) to Monitor Analysis Services:
http://msdn.microsoft.com/en-us/library/hh230820.aspx
In addition, you can aslo use SQL Profiler to capture some events for further investigation.
Use SQL Server Profiler to Monitor Analysis Services:
http://technet.microsoft.com/en-us/library/ms174946.aspx
If you have any feedback on our support, please click
here.
Regards,
Regards,
Elvis Long
TechNet Community Support

Is there some way to tell lightroom to just re-export the previously exported files?

Shot a celebration (Park, Mass and Party), went home and processed the raw files in Lightroom, Exported them into 3 folders.
Then I proceeded to edit the files in photoshop, first folder that consisted of the park went well. Files looks great, even after compressing them again.
Then up were the Mass pictures and that's where it all went down hill. When I loaded up the first image it was compressed to hell All the black areas were all pixelated, so I went into lightroom and sure enough it changed the quality from 100% down to 60%!
All my other settings were the same so I didn't accidentally reset the whole thing. Not sure why or how Lightroom did this, I've had it on 100% for the past 2 years!
Now I have to export them all over again, the trouble is there was 800 that I culled down to just 150. I really don't want to hand pick them all over again.
Is there some way to tell lightroom to just re-export the previously exported files?

The short answer: no.
Lightroom remembers recently imported files in a collection, but does not remember recently exported files.
That said, you could use the SQLiteroom plugin (free, by me) to round up a collection of *all* exported files, which might help.
Rob

An error occurred in the requested FTP operation. Detailed error description: The password was not allowed

Hi All,
We are using FTP Connection in our SSIS Package which will take a flat file from the sharepath to another FTP Path.
We used SqlServerTableConfiguration to store all the connection. Initally we have stored only the below connection int he
SqlConfiguration table. ie only the server name
Note : We are not using XML Configuration.
ConfigurationFilter
   ConfiguredValue
PackagePath
Filter_ftp
pqrft- pcmnt.uk.acenentcapmc.com:21
\Package.Connections[FTP Connection Manager].Properties[ConnectionString]
while running the job we have found that we have not stored the UserName and password so we have added the below entries in the Sql Configuration table
In the Configurationtable we have the following entires
ConfigurationFilter
ConfiguredValue
PackagePath
Filter_ftp
pgrotmlceni
\Package.Connections[FTP Connection Manager].Properties[ServerUserName]
Filter_ftp
21
\Package.Connections[FTP Connection Manager].Properties[ServerPort]
Filter_ftp
abcdXYZ
\Package.Connections[FTP Connection Manager].Properties[ServerPassword]
Filter_ftp
pqrft-pcmnt.uk.acenentcapmc.com
\Package.Connections[FTP Connection Manager].Properties[ServerName]
Filter_ftp
pqrft-pcmnt.uk.acenentcapmc.com:21
\Package.Connections[FTP Connection Manager].Properties[ConnectionString]
In the package properties we have selected "DontSaveSentivity" Option.
We are getting the below error message when we run the package through jobs after deployment and also we are getting the same error message even when we run the package from Bids
Message
Executed as user:abc_xyz-proxy. Microsoft (R) SQL Server Execute Package Utility Version 10.50.4000.0 for 32-bit Copyright (C) Microsoft Corporation 2010. All rights reserved.    Started: 06:53:16 Error: 2013-12-16 06:53:20.69
Code: 0xC001602A     Source: SSIS_ABC_GT_GRoots_Export Connection manager "FTP Connection Manager"     Description: An error occurred in the requested FTP operation. Detailed error description: The password
was not allowed . End Error Error: 2013-12-16 06:53:20.71     Code: 0xC002918F     Source: FTP Task FTP Task     Description: Unable to connect to FTP server using "FTP Connection
Manager". End Error DTExec: The package execution returned DTSER_FAILURE (1). Started: 06:53:16 Finished: 06:53:20 Elapsed: 3.822 seconds. The package execution failed. The step failed.
ilikemicrosoft

Hi Surendiran,
The issue should occur because the syntax of the ConnetionString property of the FTP Connection Manager is incorrect. In fact, the ConnectionString property is unnecessary. I suggest that you only use the four properties instead: ServerName, ServerPort,
ServerUserName, and ServerPassword.
Reference:
http://stackoverflow.com/questions/3888170/ftp-connection-string-using-expression-in-ssis
Regards,
Mike Yin
If you have any feedback on our support, please click here
Mike Yin
TechNet Community Support

Unable to receive e-mails & Sending and Receiving' reported error (0x80040126) & (0x8004102A) : The operation cannot be performed because the connection to the server is offline.

Everything good until yesterday, Sending and Receiving' reported error (0x80040126) & (0x8004102A) : The operation cannot be performed because the connection to the server is offline.
I am connected so I don't know why it is "offline". I am able to "send emails" but not receiving.

Hi,
What’s your Outlook account? Exchange account or some other Internet email accounts?
This issue is usually happened when the Microsoft Outlook Hotmail Connector account is syncing changes to a folder and cannot find the folder in the Outlook client. Please try the following KB to check it:
http://support.microsoft.com/kb/2231628
If the issue persists, please create a new Outlook profile and add the email account to have a try:
http://support.microsoft.com/kb/829918
Regards,
Winnie Liang
TechNet Community Support

The requested eBook title cannot be downloaded at this time due to difficulty in communicating with the retail site. Please try again later.

I tried to download an Adobe PDF DRM from the Kobo site and got this error message. The tab in Safari displaying the error message was labeled "Retailer Not Authorized." I googled the error message and saw a post saying that Kobo support says this is an Adobe problem. Is it an Adobe problem?

Did you ever get this resolved? I'm having the same issue.

Every time I try to make a pre-set in export the top export to drop down button changes from Hard Drive to email. What anm I missing.

As above title sorry.

Turns out I'm going to have to BUY iLife '11 (from Best Buy) because the download version on Apple's site is for those with Lion only and I have Snow Leopard. This is becoming a major PAIN. Apple shoudl continue to offer its older products online at least (if not in their stores) rather than just dropping them completely.

Specified operation cannot be performed while the task is running. Task Name: ClockTriggerBit

I am trying to set the timing for digital line on 6221. As recommended in the documentation "NI DAQ MX C reference guide" I stop the task, run the following:
DAQmxCfgOutputBuffer
DAQmxCfgSampClkTiming (taskHandle, "ao/SampleClock", 100, DAQmx_Val_Rising, DAQmx_Val_FiniteSamps, 10);
DAQmxWriteDigitalLines
DAQmxStartTask -> this is when I get the warning 4294766817. Why?
Any better way to set the sample clock? I need to do it using internal clock in 6221.
Thank You,
Mark.

Hello Metrikos,
I've got a couple things. First, could you be more specific as to where in the DAQmx C Reference Help you are referring to. Secondly, attached is an example of corellated digital input with analog input. I know this isn't exactly what you are trying to do, but it might give you a good reference.
-Alan A.
Attachments:
ContAI-ReadDigChan.c ‏6 KB

When I try and Save for Web in Photoshop CC I receive an error message saying 'The operation cannot be completed. The requested operation cannot be perfomed on a file with a user-mapped selection open'.

When I try and Save for Web in Photoshop CC I receive an error message saying 'The operation cannot be completed. The requested operation cannot be performed on a file with a user-mapped selection open'. This happens with any of my files not just one in particular...
Can anyone help solve this please?

ELEMENTS 12 AND ELEMENTS 13
Upgraded to 13 Thinking might resolve the issue.
Was working fine up until we had "Tech" come in the office and "up grade some stuff"
then all of a sudden i started getting this message, something happened but i don't have a clue what.

Failed to export the JPEG file

When I attempt to export a jpeg from InDesign I get the following error message, please help:
"Failed to export the JPEG file: File cannot be written.
Disc may be locked or full."
The disc it is writing to has 90Gb of memory free and I've tried knocking the quality of the export down with no success.
I am running CS6 on a fully updated Macbook Pro.
Thanks.

I'm trying to export to the hard drive on the Mac as usual, and have never had this issue before?

It is possible to delete the request after compression

Hi,
It is possible to delete the request after compression,if it yes,how can delete the request.

Hi,
You cannot delete the request individually but you can one of the following:
1. Do a selective deletion from the cube. RSA1 -> Cube -> Contents -> selective deletion.
2. Delete all the data in the cube and then reconstruct only the required request ids. This would work only if you have the PSA available for all the requests.
3. Reverse posting is another possibility.
Bye
Dinesh

Trouble exporting: "the requested export operation cannot be performed"

Similar Messages

Maybe you are looking for