Trouble exporting to DVDSP

I'm trying to export using Quicktime Conversion so as to import into DVD Studio Pro. I keep getting the message: "sequence needs to be rendered first." There isn't a render bar above the sequence. Everything appears fine. What could be the problem? When I tried it using Quicktime only, it compressed yet the file doesn't appear in DVDSP or iDVD. What's going on? HELP!!!

You'll need to make sure all appropriate render types are selected under the Sequence->Render menu, including Audio Mixdown before you do a final render. The second half of this article may help explain the render types better than the FCP manual: http://www.kenstone.net/fcphomepage/rendering_rt_fcp_4balis.html
-DH

Similar Messages

  • Trouble exporting to DVDSP from FCP5

    I'm having trouble exporting my sequence into DVDSP4. I've tried using Quicktime Conversion and Quicktime but the sequence doesn't import into DVDSP and neither do the menue templattes. When I attempt to convert to Quicktime a message pops up with "data needs to be rendered first," although the red render bar isn't there. It's just grey in the bar area. What is going on here. HELP!!!

    Export self contained and use Compressor to m2v and Dolby2

  • Trouble exporting to MPEG-2

    Hi, I am having a lot of trouble exporting from FCP 4.5 to MPEG-2 for DVD Studio Pro. When I export a video, sometimes it looks as if it worked but sometimes the program unexpectedly quits. When it looks like it worked I try importing the file into DVD studio pro, but when I preview it, the bottom half of the screen is green, and this usually causes DVD Studio Pro to unexpectedly quit. I have tried exporting it as a quicktime movie to DVD studio pro and have it convert it while its burning the DVD, but that ends in the video having lots of artifacts and the green problem. If anyone has any suggestions it would be extremely helpful. Thanks. By the way, I have repaired permissions and trashed the preferences files of both programs.

    Try this workflow:
    - From FCP export your timeline as Quicktime Movie, self contained and same settings as your sequence.
    - Take that movie into Compressor, select a MPEG2 preset that match your project lenght (I didn't find such information in your posts) and Dolby AC3 for your audio.
    - Import those encoded files (MPEG2 and AC3) into DVDSP.
    Post the results.

  • Trouble Exporting to PDF

    I am having trouble exporting one file to PDF. I try other indd files and they export prefectly fine. Just this one file. When I export it has the message "background task: Failed to export a PDF"
    I try couple solution online that I find
    1. Disable preflight and restart InDesign
    2. Add the document to a new book and export from the book panel
    The only think that I couldn't try is Disable background exporting.
    I am having a little trouble there....I did create an empty ext file and save it as "DisableAsynExport.txt"
    but I seem to have trouble going to the folder. It said that you need to go...
    Mac: /Applications/Adobe InDesign CS5.5/Adobe InDesign CS5.5.app/Contents/MacOS/
    When I got to Adobe InDesign CS5.5.app it opens the app instead of opening another folder... not sure if there is another way to open it.
    So when I go to Mac: /Applications/Adobe InDesign CS5.5/
    It has Adobe Indesign CS5.5.app, Configuration folder, Documentation folder, Fonts folder, Legal folder, Plug-Ins folder, Presets folder, Scripts folder and Uninstall Adobe InDesign CS5.5
    So I have not clue where the Contents/MacOS is??
    Would be best is someone can help me....
    Thank you so much!!!

    If it failed from a book, it won't matter if you disable background export becasue books don't use it.
    See Adobe Community: File Crashing on Output - printing/PDF/other

  • Trouble exporting interactive pdf´s

    Hi!
    I having som trouble exporting pdf from indesign cs6 using the interactive export option. In short my goal is to export a magazie file, about 80 pages to a pdf using srgb color space and medium res images to use on a website. I have previously used the interactive option in the export dialog box, since this option converts the file to a web freindly file. Now this crashes indesign. On page 64 everthing stops and I have to force quit ID. This have worked before, but now I have experienced the same problem on two different files. Does anyone have any clue to why this happens or any suggestions to a work around?
    Thanks, Rune

    This usually indicates theres a problem with something on a page. You can often isolate it using a divide and conquer strategy. Try exporting the front half of the file and the back half  as separate PDFs. If either half fails, divide that in half and repeat until you are down to one page. Do the same with the objects onthe page (though it usually turns out to be an image).
    If both halves export OK initially, then it's a problem of machine resources. Combine the two halves using Acrobat Pro.

  • Trouble Exporting with DeNoiser

    I'm having trouble exporting using DeNoiser in premiere. It's playing back fine in Premiere but after being rendered/exported the transitions buzz a bit.

    Hi John, I was able to find a solution:
    http://forums.adobe.com/message/5385287
    look what the member "11. abrapiro14" wrote. It worked for me.

  • I have trouble exporting indesign file as pdf.

    I have trouble exporting indesign file as pdf. I need help please.

    Hi,
    Please start by telling us what happens when you try, and also how you are exporting the file.
    Regards,
    Malcolm

  • Trouble exporting projects

    So I'm having trouble exporting .. Final Cut just keeps crashing when I try most types of Exports. If I select Share -- Master file, I'll get a beach ball, and then it crashes. The same with Share -- Apple devices. When I do Share -- YouTube, it seems to work. But at the final step, it just does nothing. Just hit Publish and it goes back to the project with no status bar or anything.
    Part of the error that I get when it crashes includes:
    Exception Type:  EXC_BAD_ACCESS (SIGSEGV)
    Exception Codes: 0x000000000000000d, 0x0000000000000000
    I'm using 10.0.7. Any ideas of what might be going on and what I could do to correct? Thanks!

    Here's a doc you may want to review.  Tells how to trash preferences and reinstall the app, the first two things to try.  BTW, "Repair Permissions" in Disk Utility is a waste of time, it has never "fixed" anything.
    http://www.fcproxuniversity.com/documents/FCSystemMaintenance.pdf

  • Trouble Exporting Images from Lightroom 3

    I am having trouble exporting images from Lightroom 3 with my User Presets. Error Message: The file could not be written. (1). It has always worked in the past but I just bought a new Mac and had everything transfered to it. Everything else seems to be workin fine. Any solutions?

    Sometimes on new computers, the permissions in certain folders are not set up to allow you (the only user) to write files. It's worth a check.

  • I am having trouble exporting closed captions from premiere cc 2014.

    I am having trouble exporting closed captions from premiere cc 2014. I see them in the program monitor but after i export and try to playback in either quicktime or VLC i get to embedded captions. I eve tried the side car file and embedded with compressor and still nothing. Any help would be appreciated.
    I only used compressor because i switched from final cut to adobe. easy fellas!

    I have latest QT version, do i need to go back to 7? I have tried VLC also, i usually use that to check CC in mpeg files. I am exporting a QT H.264 for just testing purposes, I need a prores HQ, also this is SD so my sequences are set to 720x486.

  • I am having trouble exporting .raw files to an external storage device.  Even though I export "original" they end up as jpeg files.  Any idea what I am doing wrong?

    I am having trouble exporting .raw files from my Mac Book Air to an external storage device.  Even though I am exporting as "original" they are being exported as jpegs.  Anyone have an idea what I am doing wrong?

    Using the "original" setting is the correct way to do it.  Select on of the photos and use the File ➙ Reveal in Finder ➙ Original menu option.  That will take you to the file inside the library via the Finder.  Confirm that what you see if the raw file.
    If it is then try the following:  make a temporary, backup copy (if you don't already have a backup copy) of the library and try the following:
    1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your
         User/Home()/Library/ Preferences folder.
    2 - delete iPhoto's cache file, Cache.db, that is located in your
         User/Home()/Library/Caches/com.apple.iPhoto folder. 
    Click to view full size
    3 - launch iPhoto and try again.
    NOTE: If you're moved your library from its default location in your Home/Pictures folder you will have to point iPhoto to its new location when you next open iPhoto by holding down the Option key when launching iPhoto.  You'll also have to reset the iPhoto's various preferences.
    OT

  • Trouble exporting in premiere!

    Im am having trouble exporting and after effects file out of premiere. It stops in the middle of exporting and  it show in the premiere project window that the files are offline. It isn't getting past 2%. Could my file be corrupted? Please Help.

    No thoughts but I generally avoid DL and make digital intermediates for use between AEFX and Premiere.
    I trust them and I can manage them.  Never had an issue.
    This is still the clue to your issue I think.
    it show in the premiere project window that the files are offline

  • Trouble exporting to DIAdem

    Hi,
    I am using a 6070E DAQ card to read the output of a sensor. I am having trouble exporting the data from the labview program to DIAdem.
    When my vi stops running, it displays the information on a waveform graph. I right click on the waveform graph and select "Export data to DIAdem", it opens DIAdem but randomly sets some of the values to zero, both the time and the actual readings... Sometimes it's only one or two of the data points, but sometimes (like in the picture), it completely distorts the data. I've attached the vi and also an image of how it exports to DIAdem... The chart should be showing 10 cycles of a 10 Hz sine wave.
    Is there anything I can do?
    Thanks in advance.
    Solved!
    Go to Solution.
    Attachments:
    6070E.vi ‏28 KB
    Export from vi.jpg ‏323 KB
    DIAdem report.jpg ‏410 KB

    Hi Sadegh - 
    I just wanted to mention as an addendum to Brad's comment that if you want to export to happen automatically, another option is to use an Invoke Node to invoke the "Export to DIAdem" method of the chart/graph - another super easy way to achieve the functionality.
    Don't forget that for the greatest flexibility, consider saving your data to file (e.g. TDMS) and then loading it with DIAdem (you can do all of this programmatically, too).  This will allow you to save your raw data, invoke custom post-processing, apply your own customized report templates, etc.  Just one more option to consider.  Let us know how we can help after Brad posts his fixed VI.
    Derrick S.
    Product Manager
    NI DIAdem
    National Instruments

  • Trouble Exporting MXF from PP Cs6

    Hello,
    I am having a lot of trouble exporting a sequence of mxf footage out of premiere pro cs6. Whenever I try to export directly from Premiere the program stalls out. I tried sending it to adobe media encoder, which worked temporarily. Now, the sequence doesn't show up in adobe media encoder. I then tried sending turning the sequence into an AE composition, which again worked seamlessly temporarily. I am working with multi-clip sequences and last night I noticed that when I turn my sequence into an AE comp, after effects began referencing the wrong angle. After Effects also began giving me error messages saying that it was having trouble conforming some of the mxf files. Any insight into how I can fix this would be most helpful. I am working on a Mac Pro Ghz-6 Core Intel Xeon.
    Thanks!

    What exactly do you mean by "multi-clip sequences." Multicam?
    If so, try dropping the same source content into a sequence without any multicam edits and see if that exports. That will help determine if the problem is limited to multicam sequences.
    Have you tried closing all the apps, confirming through Activity Monitor that all the processes shut down (including pproheadless and dynamiclinkmanager), and then relaunching the apps? Or simply rebooting the system. This feels a bit like a problem where the initial failure to export left things in a bad state, so that you need to clear the decks.
    What are your export settings? Do you have similar problems exporting to other formats?
    And just to confirm the reference in the thread's title, you're running PPRO CS6, not CC, right?

  • Is it possible to export a DVDSP menu as .PSD Photoshop file?

    I promise this will be the last question for tonight. Is it possible to export a DVDSP menu as .PSD Photoshop file with its layers intact? I'd like to examine the structure to see if there's an easy way to re-create all my EncoreDVD menus as DVDSP menus.
    Peace, BJ

    Without opening DVDSP, I can't say for sure, but is there an option to export the menu as Movie to Image Sequence? Is there an option to export the menu at all? Sorry for asking a question to answer a question, but I don't have my scratch disk with me and don't want to open DVDSP without having my current project with me. However, the image sequence wouldn't give you layers. Simply put, I don't think so. Apple's apps have played well when it comes to importing .psd files, but as far as creating them, not so well. As far as recreating Encore Menus, is there an XML type file that's compatible with both Encore and DVDSP where you could just reconnect your media assets in DVDSP and then import this XML file?
    Good luck either way and report back with what you find,
    -Brian

Maybe you are looking for

  • FB08 error while posting

    Hi All, When we are reversing a document with FB08 transaction system is throwing an error as "Correct the marked line items. Message no. F5413" We have 6 line item for VAT a/c with no tax codes in the original document and only two g/l codes(Dr & Cr

  • How to Zoom swf content

    Hallo. I need a little help. I have created a web application, a swf file with all flash content. Is there a way for me to zoom all content??.. I mean some feature inside flex which can let users zoom all swf content?.. Hope for any help. Thx Max

  • CS6 won't open images

    I can't get images to open in CS6. Get the following message. "Adboe Photoshop CS6 stopped working. A problem caused the program to stop working." Reistalled several times. This error also happens with Elments 10.  Installed older verson of Elements

  • HT5622 This Apple ID has not yet been used in the iTunes Store

    This Apple ID has not yet been used in the iTunes Store

  • Backup Issues with iPhone 4 and iOs 4.3.3

    So after arriving in town on a business trip, I find myself accidentally locked out of my phone. Knowing that I need to restore it in order to regain access to it, I begin downloading the update to 4.3.3 so that the restore can process. Due to this b