Trouble exporting to Itunes

I'm trying to export a song to itunes. First off, I don't know if this is normal or not, but the song's name gets listed as "bounced" whenever it enters itunes. I've had this happen with another song without any ill effect, but the one I'm currently exporting defenitely has a problem.
First of all, it lists the song as 6:00 minutes, which is twice as long as it actually is. Secondly, it sounds... well... mixed up when played back. The quality is excellent, but it's not playing what I played. Or rather it is, but all jumbled together and coming in at odd times.
It plays fine in Garageband, by the way.
Any help?

Select the entire song and slide it over a measure, so it now starts on measure 2 instead of measure 1. Then export it.

Similar Messages

  • Trouble exporting and playing in iTunes

    Hi, I am new to Logic Pro 8 and I am having trouble exporting. I have bounced two files one as 'wave' and on 'mp3' and neither one will play in iTunes. I also exported 'all tracks as audio file' and none of those would play.
    After deleting the files that would not play to start over again, when I start logic pro it says it cannot find the audio files I exported and none of the tracks will play.
    If anyone has any ideas on these problems I would greatly appreciate the help! Thank you so very much!

    1. you must use file- bounce menu of Logic
    2. If you use only ext. midi not software instruments - you must rewrite them as audio tracks at first.

  • Having difficulty with quality when I export to iTunes

    My faithful GB geniuses:
    I've been using GB for quite some time now and have not had much trouble when it comes to sound quality. I know that when you export to iTunes, it mixes down your song to a file with the resolution of 44.1 kHz at 16 bits (I may even be confused here -- no matter, these numbers mean little to me since I do not fully understand sample rates, etc).
    Anyway, I have this song that has eleven MIDI/Software Instrument tracks and six Real Instrument tracks (5 guitars, one bass). It sounds great when I playback the GB file, during editing. Then, when I Export it to iTunes, there is one guitar (a lead guitar with Amp Simulator, Distortion, and Echo effects added) that comes out sounding like utter crap. When it comes in, the entire file sounds crackly and awful. The guitar drops in volume, and also quality.
    Up until the distorted guitar track comes in, the song sounds fine. So it's not the other 5 guitars that's doing it. Does my problem have to do with the fact that the lead guitar has too many effects on it for GB to handle? But no, this can't be right because when I play the GB file, it sounds studio-quality. When I export to iTunes, it sounds like somebody is slowly murdering a cat.
    Also, I went into iTunes prefs and changed the "Importing" settings to "Highest Quality", and it did not make it any better. If this problem can be remedied through some simple changes in iTunes Importing prefs, can somebody briefly explain to me how to do so?
    Thank god I have you guys. Help me out! On a side note, what's with all these people complaining about how hard GB is to use? With the exception of my case, in which I think I'm trying to push the bounds of what GB can accomplish, GB is ridiculously easy to navigate.
    On another side note, check out my songs that HAVE come out successfully, quality-wise!: www.soundclick.com/dijitel.
    Thanks in advance for your help, guys.
    dijitel.

    Thanks for the input, AppleGuy.
    It seems my initial problem was that I had the EQ on some setting on iTunes by accident, and that was affecting how some GB songs sounded once they were exported. Then I tried locking the tracks (all of them actually), and doing it again, and that didn't seem to make much of a difference since I had already solved the problem.
    But that's an interesting point -- what sort of effect does locking the tracks have on how they sound once they're exported to iTunes? Should I lock all of the tracks now before I export?
    Any other basic tips on getting the absolute best quality possible out of a song that has a lot of real instrument tracks is welcomed. Thanks again for your help.
    dij.

  • I am having trouble redeeming my iTunes card on the App Store.  It always times out when I enter the code.  But when I try to enter the redeem code in the iTunes Store, an error code comes up (5002)  What does that mean?

    I am having trouble redeeming my iTunes card on the Mac App Store....A message comes up and says, "your session has expired.  Try again."  I try again and it's the same message.  I also tried to enter the redemption code on the iTunes Store and the same message comes up or it says, "Error 5002"  I need help....I feel like I wasted my money.  and I need  a program for school. 

    Clic here:  iTunes: Advanced iTunes Store troubleshooting
    Then click:  Expand All Sections
    Then scroll down to error 5002.

  • How can I export my iTunes Library to an external hard drive?

    How can I export my iTunes Library to an external hard drive? and once i do that how can i play the library through the external drive? I basically want to be able to delete all my music on itunes once it is on my external hard drive so i can have more internal hard drive space.

    Follow this guide very carefully: http://support.apple.com/kb/HT1364?viewlocale=en_US
    It's very easy to do....

  • Can't export to iTunes anymore

    Been using GB for about six months. Yesterday after finishing a song in GB, I told it to export to iTunes, and it tried...it finished up until the part where iTunes automatically opens and the file appears in iTunes. Instead of that happening, iTunes opened, and I saw in the iTunes status window: "Copying 1 of 1: Bounced" then that failed, then the OSX message "Error: Cannot read or write to disk." I checked the permissions for the HD, and "Read and Write" is NOT highlighted as an option. However, I can save documents anywhere but GB. So I reinstalled all my OSX software, including iTunes. Now iTunes won't open at all--it tries, and then I get a message that it unexpectedly quit. I thought it might be a Library issue, so I tried dragging the library onto the desktop, even the old libraries. Nothing changed. I reinstalled iTunes, but still the same thing. I don't think it's a GB problem, but I really can't tell at this point. I posted a similar question in iTunes, so hopefully someone from one of the forums can help...Please?

    Deauthorization:
    If you have ever purchased songs from the iTunes Music Store, Apple has placed digital rights management copy protection software on your main hard drive (where Mac OS X lives) that identifies you as the legal purchaser of those recordings.
    If you back up your whole hard drive, reformat it and re-install everything, or if you put in a new hard drive and set it up to be your Mac OS X main drive, you lose the right to access any of the iTunes Music Store songs that you have purchased, because you have inadvertently deleted Apple's digital rights management copy protection keys that authorize you as the owner of those recordings you purchased.
    So if you need to do this to your main hard drive, first you must go into iTunes and do a de-authorization. When you set up your new hard drive, you have to re-authorize.
    Apple sez:
    [blockquote]To deauthorize a computer to play songs or spoken word content purchased from the iTunes Music Store, choose Advanced > Deauthorize Account. Then choose "Deauthorize Computer for Music Store Account" and enter your Apple or AOL ID and password.[/blockquote]
    Similar steps have to be taken with many other music programs that utilize copy protection in software, such as Sibelius, SampleTank, Cubase, etc.
    It's confusing because all that Apple and other companies tell you that you must de-authorize and then re-authorize if you move all your files to a new computer. While that's true, it's misleading, because the authorization issue also applies if you move to a new hard drive inside your existing computer.

  • HT1473 I have an EZ Vinyl/Tape Converter (MixMeister) to export vinyl records to iTunes. The computer downloads (records) the songs from the record, but when it is to be exported to iTunes, I get a window that says iTunes unable to export. (compatability?

    I have an EZ Vinyl/Tape Converter (MixMeister) to record vinly records to my computer; which then is supposed to automatically download to my iTunes program. But it does not. It records and stores (somewhere) in the computer, but when it is supposed to be exported into iTones, I get a window that says something about incompatability and/or "close other windows in iTunes; but there are no open windows and iTunes is closed. I followed all instructions to EZ Vinyl to the T, but no export/import to iTunes. What am I doing wrong? What do I need to do? THX!

    Tony, thanks so much. The message reads: "Unable to export to iTunes. Please make sure you close any active windows in iTunes. Would you like to try exporting again? [Yes] [No]"
    And of course I click on Yesl, but I keep getting the same window message. I read somewhere, that MixMeister is not compatible with Apple iTunes 10 series versions. The advice said to go to control panel; Programs; click on iTunes; click on Change; click on Repair. I tried that, but I still get the same window message. Then I read that I should contact the mixmeister support website, which will be my next step. But if you can provide any direction, I would greatly appreciate it. Thanks again!
    Dan

  • I am having trouble downloading an iTunes movie.  It repeatedly quits and gives me an error message that my network connection was reset.  Any suggestions?

    I am having trouble downloading an iTunes movie.  It repeatedly quits and gives me an error message that my network connection was reset.  Any suggestions?

    Hello sudsy71,
    The article linked below provides some useful troubleshooting steps that can help resolve this error.
    Can't connect to the iTunes Store
    http://support.apple.com/kb/TS1368
    Cheers,
    Allen

  • Trouble Exporting to PDF

    I am having trouble exporting one file to PDF. I try other indd files and they export prefectly fine. Just this one file. When I export it has the message "background task: Failed to export a PDF"
    I try couple solution online that I find
    1. Disable preflight and restart InDesign
    2. Add the document to a new book and export from the book panel
    The only think that I couldn't try is Disable background exporting.
    I am having a little trouble there....I did create an empty ext file and save it as "DisableAsynExport.txt"
    but I seem to have trouble going to the folder. It said that you need to go...
    Mac: /Applications/Adobe InDesign CS5.5/Adobe InDesign CS5.5.app/Contents/MacOS/
    When I got to Adobe InDesign CS5.5.app it opens the app instead of opening another folder... not sure if there is another way to open it.
    So when I go to Mac: /Applications/Adobe InDesign CS5.5/
    It has Adobe Indesign CS5.5.app, Configuration folder, Documentation folder, Fonts folder, Legal folder, Plug-Ins folder, Presets folder, Scripts folder and Uninstall Adobe InDesign CS5.5
    So I have not clue where the Contents/MacOS is??
    Would be best is someone can help me....
    Thank you so much!!!

    If it failed from a book, it won't matter if you disable background export becasue books don't use it.
    See Adobe Community: File Crashing on Output - printing/PDF/other

  • I can´t see the pics I imported into my podcast when I export to iTunes

    After making a podcast with pics, I was unable to view the podcast with itunes - I could only hear the audio tracks - but no pics - who can help me?

    When you export to iTunes, you have to use the AAC compression, neither MP3 nor uncompressed AIFF will contain the pics.
    Alternatively, select "Export to disk", and the podcast will be saved in AAC format by default.

  • Export to iTunes where is save as AIF?

    I don't get this I am trying to record a simple voice over. I have a Motu unit and a mic and I finally got the track to record in Garage Band and now I go to try to export the audio file so I can use it with my video editing program and the only option is Export to iTunes?? Am I missing something?
    Where are the original recorded audio files located? Can you control what format they are recorded in? Can I just grab those?
    I don't use iTunes how do I get a good quality AIF file out of this??
    Thanks in advance,
    Greg

    Exactly (..why they don't bundle projects, events, etc in one package that you're free to move around..).
    I have my projects on a disk known as "/Volumes/LaCie Disk". I cannot move it -- I tried. There is no option in the File menu or Preferences. When you import a movie you can specify where the Event files go -- that's it -- FOREVER.
    You can actually drag the event directories around, just not the .rcproject files (the files that have my painstaken editing data).
    Looking in the .rcproject directory there are several files - some binary - some ascii with compressed data in XML format. In both cases you see "/Volumes/LaCie Disk" hard-coded into the file. I tried editing the "/Volumes/LaCie Disk" entry, but, alas it didn't work. If I want to edit my .rcproject a year from now I will have to do it at a location called "/Volumes/LaCie Disk".
    Apple, please, please add a Save As option to iMovie 08 -- soon!

  • EntaOk, I am atuallually having troubles with my itunes music card. I accidlly scratched a letter off. i want to get my card to work. how? thank you.

    Ok, I am actually having troubles with my itunes music card. I accidentally scratched off a letter. how can i get my card to work without the actual code? thank you.

    Yu can try contacting iTunes. See the iTunes Cards abd Code topic of:
    Apple - Support - iTunes

  • Can't Export to iTunes

    After finishing a GarageBand file, my iMac G5 won't export into iTunes. It's gets to the end of the slidebar and then just sits there. Nothing.
    Also, I have been unable to install any iTunes upgrades since the horrible 7.0 or 7.01 version. The installer opens and it won't go past the "preparing" window. I get the following in the Installer Log window:
    Package Authoring Warning: The installer script defines but doesn't use (and can't install) package id manual version 8.0.2.2230000.1687.
    I've tried removing the prefs files from both GarageBand and iTunes and I still have the export problem and the inability to upgrade iTunes.
    Any solution besides a clean install (which I had just done a month prior to the problems beginning)?
    Thanks!
    --Ted

    Try repairing your permissions, then restart your computer.

  • Trouble exporting interactive pdf´s

    Hi!
    I having som trouble exporting pdf from indesign cs6 using the interactive export option. In short my goal is to export a magazie file, about 80 pages to a pdf using srgb color space and medium res images to use on a website. I have previously used the interactive option in the export dialog box, since this option converts the file to a web freindly file. Now this crashes indesign. On page 64 everthing stops and I have to force quit ID. This have worked before, but now I have experienced the same problem on two different files. Does anyone have any clue to why this happens or any suggestions to a work around?
    Thanks, Rune

    This usually indicates theres a problem with something on a page. You can often isolate it using a divide and conquer strategy. Try exporting the front half of the file and the back half  as separate PDFs. If either half fails, divide that in half and repeat until you are down to one page. Do the same with the objects onthe page (though it usually turns out to be an image).
    If both halves export OK initially, then it's a problem of machine resources. Combine the two halves using Acrobat Pro.

  • I had trouble with a iTunes download.  Two songs of an album were not complete.  I contacted iTunes and yawl post the the download again.  My iTunes now has the complete copies.  The trouble is my iPhone will not accept/sync the complete copies.  What up?

    I had trouble with a iTunes download.  Two songs of an album were not complete.  I contacted iTunes and they redownloaded the tunes.  My iTunes now has the complete copies.  The trouble is my iPhone will not accept/sync the complete copies.  It will only play the original incomplete copies of these songs.  I've made new playlists and made sure I had the correct items checked to backup/sync.  Still only the incomplete copies are played via the iPhone.  What's up?  What can I do to get to the iPhone to sync the correct version?

    - Are you saying that they are not listed in your Purchased section?
    Downloading past purchases from the App Store, iBookstore, and iTunes Store
    - Are they listed in your Puchases history when you log into your account on your computer?
    - Are they still available now for purchase? If not then you are out of luck
    If they are still available and listed in your Puchase History then contact iTunes
    http://www.apple.com/support/itunes/

Maybe you are looking for

  • HDMI from Macbook to Samsung LCD

    Hi Bought an iWires Mini DisplayPort to HDMI cable to today with the view of connecting my MacBook to my TV, all is well apart from on my TV it flickers and cuts out and I get a black screen every few seconds. What is causing this and how do I fix it

  • Can I set iWeb to automatically use my font/style/size?

    Is there a way to get iWeb to automatically set the font, style and size that I want to use in my iWebpage? I want to use Optima. I went to the iWeb preferences menu but it does not mention fonts. Last night I had to first delete all the examples in

  • I have a few errors with Firefox Home that have recently began to appear.

    Firefox Sync always tells me the password is wrong on my account and it cannot sync. I then have to uninstall everything, install Firefox Home and syn with a new password etc. Secondly, when I open some of my bookmarks on my Iphone 4s a the web page

  • How do I remove the info on home page

    Please help how do I remove the messages from my home page as they are so annoying

  • I want to Embed flash in Forms 6i

    I want to Embed flash .swf flie in Forms 6i I need the support quickly So please give me the support quickly