Trouble Exporting with DeNoiser

I'm having trouble exporting using DeNoiser in premiere. It's playing back fine in Premiere but after being rendered/exported the transitions buzz a bit.

Hi John, I was able to find a solution:
http://forums.adobe.com/message/5385287
look what the member "11. abrapiro14" wrote. It worked for me.

Similar Messages

Trouble exporting with QuickTime 7 to UNCOMPRESSED 10-bit 4:2:2

I have succeeded with shorter videos, but my 90 minute video returns "error -2125".
Somehow I managed to do this before, I'm not sure what has changed on my system. Does anyone else have trouble exporting to Uncompressed 10-bit 4:2:2 ? I'm now exporting to ProRes instead, but would prefer uncompressed video for the sake of quality.

You don't say what's the source of your clips.
If standard DV (..though I doubt that an agency would accept standard def video any more..) NTSC DV is compressed in the camera as 4:1:1, and PAL DV is compressed as 4:2:0 ..so you won't get true 4:2:2 from normal DV, unless you're using a broadcast camera (..probably feeding into the capture device via SDI inputs).
If the source was tape-based HDV or any other hi-def source, then iMovie converts that, during import, into Apple Intermediate Codec, and wouldn't be able to output proper Uncompressed 4:2:2 material.
For Uncompressed 4:2:2, I think you'll need to be using a dedicated capture card - and massive-capacity hard discs! - to be able to import the material in the first place.
iMovie certainly isn't the program to handle pro video of this nature.
Ask in the Final Cut Pro Discussions..
"..I've also tried doing this on my Macbook with Intel processor.." ..but maybe that's just not fast enough (older Mac portables have "shared graphics memory" ..meaning their graphics processor may have to compete with the main processor to temporarily grab free RAM)!

Trouble exporting with compressor

Been working on a project with multiple exports with compressor -- working just fine. Without changing any settings, FCP 5.1.4 now says "this file contains no media" when I try to export new sequence. Running with two internal hard drives, one dedicated to video files only. Will export with quicktime okay and playback is fine. Thoughts, ideas?

Hi:
It's an old "bug?" in FCP and is related with folders opened/focused in FCP browser.
Check this old thread:
http://discussions.apple.com/thread.jspa?messageID=1106846&#1106846
Hope that helps !
Alberto

Trouble exporting with QT conversion

Hey all-
When I export using QT conversion, choosing the LAN/Intranet option, the export takes a couple hours and the product is, for lack of better a explination, "herky-jerky." Like there are frames dropped in it.
Most of the media in the original project suddenly went offline, and I can't find or reconnect it. Thankfully, I was able to export a full quality version just prior to this happening. So I'm just taking that file, importing it into FCE, and exporting it with the conversion. Which is assume is a fine solution. All rendered and mixed-down. Any suggestions?
I have FCE 4.0 and QT 7.6.

You should have edited your video in a Timeline that reflects the codec used in the original material.
Export a QuickTime movie using "Current Settings". No recompression or conversion.
The movie can be Self Contained or a Reference Movie.
Bring that file into Compressor. Choose a DVD Preset that fits your movie. For instance, Best Quality 90 Minutes if your movie is less than 90 minutes long. Click on "All" and delete the AIFF audio file from Compressor. Click on Submit. Wait.
Bring the m2v and ac3 files into DVD Studio Pro. Author and burn your DVD.
Alternative: Bring the exported movie from FCP into DVD SP and let the encoding take place there instead of in Compressor. Or as David suggests above, Export Using Compressor. Note that this will lock up FCP for the duration of the encoding.

Trouble exporting graphic with gradient

Hi,
I need to make a lower third bar that goes from blue at 100% opacity to 0% opacity. The problem is when I export it as a QT file the black background is exported with it. How can I just export the bar?
Many thanks
Rod

when exporting the project you have to change in the export preset from "DV NTSC Movie" to "Lossless+Alpha Movie", and the the black background is no more tahn an alpha channel now... taht neans you have the black rendered trasparent
hope that helps...

Trouble Exporting to 16:9 with Quicktime Movie or Quicktime Conversion

I have created a 5 minute movie using shots taken from my Sony HDR-FX1. The shots were native 16:9. They imported fine into FCEHD. While editing in FCEHD, the clips all displayed in the viewer as 16:9. When I exported to Quicktime Movie, the resulting product was 16:9. When I exported using Quicktime Conversion, my product became 4:3.
Having read other posts here, I looked closely at all clips (which were all checked as Anamorphic), and my Sequence (which was not checked Anamorphic -- but was instead HD1440x1080). I then created a new sequence, which was checked as Anamorphic, copied my clips to it, then exported it. It got worse. Now, it exports 4:3 using both Quicktime Movie and Quicktime Conversion.
I then created a new project, created a new sequence set to Anamorphic, then copied one clip into it from my earlier project and exported it -- same result. I then imported a clip into this new project from the original files from my camera and exported -- same result.
One final note, when looking at the Frame Size in the properties of my sequence and clips, it is set to 720x480. And, when I look at the Get Info on the exported files of the original, I see 1920x1080 (Quicktime Movie export) and 1440x1080 (Quicktime Conversion export) before I created the new sequence; then 720x480 in both after I created the new sequence.
Any help you can provide would be incredibly appreciated!
Dan

You are right. My original sequence was marked as HD. When I exported that one to Quicktime Movie, it displayed 16:9.
Then, I created a new sequence that was 720x480 and checked as anamorphic. That one, exported with Quicktime Movie and/or Quicktime Conversion was 720x480 and was squeezed into 4:3 rather than displaying in Quicktime as 16:9.
Last night, I burned this to DVD using iMovie and it displayed properly on my 16:9 television. But, alas, it is squeezed on my 4:3 television (rather than letterboxed).
Also, I exported to Quicktime Conversion and used "custom size" of 720x405 and achieved a movie that will play in Quicktime as near 16:9 so I can put it up on the web in the right dimensions.
Is there a better/easier way to export footage shot 16:9, edited 16:9 so that it automatically exports 16:9 for use in Quicktime and/or on a DVD?

Trouble exporting interactive pdf´s

Hi!
I having som trouble exporting pdf from indesign cs6 using the interactive export option. In short my goal is to export a magazie file, about 80 pages to a pdf using srgb color space and medium res images to use on a website. I have previously used the interactive option in the export dialog box, since this option converts the file to a web freindly file. Now this crashes indesign. On page 64 everthing stops and I have to force quit ID. This have worked before, but now I have experienced the same problem on two different files. Does anyone have any clue to why this happens or any suggestions to a work around?
Thanks, Rune

This usually indicates theres a problem with something on a page. You can often isolate it using a divide and conquer strategy. Try exporting the front half of the file and the back half as separate PDFs. If either half fails, divide that in half and repeat until you are down to one page. Do the same with the objects onthe page (though it usually turns out to be an image).
If both halves export OK initially, then it's a problem of machine resources. Combine the two halves using Acrobat Pro.

Trouble exporting projects

So I'm having trouble exporting .. Final Cut just keeps crashing when I try most types of Exports. If I select Share -- Master file, I'll get a beach ball, and then it crashes. The same with Share -- Apple devices. When I do Share -- YouTube, it seems to work. But at the final step, it just does nothing. Just hit Publish and it goes back to the project with no status bar or anything.
Part of the error that I get when it crashes includes:
Exception Type: EXC_BAD_ACCESS (SIGSEGV)
Exception Codes: 0x000000000000000d, 0x0000000000000000
I'm using 10.0.7. Any ideas of what might be going on and what I could do to correct? Thanks!

Here's a doc you may want to review. Tells how to trash preferences and reinstall the app, the first two things to try. BTW, "Repair Permissions" in Disk Utility is a waste of time, it has never "fixed" anything.
http://www.fcproxuniversity.com/documents/FCSystemMaintenance.pdf

Trouble Exporting Images from Lightroom 3

I am having trouble exporting images from Lightroom 3 with my User Presets. Error Message: The file could not be written. (1). It has always worked in the past but I just bought a new Mac and had everything transfered to it. Everything else seems to be workin fine. Any solutions?

Sometimes on new computers, the permissions in certain folders are not set up to allow you (the only user) to write files. It's worth a check.

I am having trouble exporting closed captions from premiere cc 2014.

I am having trouble exporting closed captions from premiere cc 2014. I see them in the program monitor but after i export and try to playback in either quicktime or VLC i get to embedded captions. I eve tried the side car file and embedded with compressor and still nothing. Any help would be appreciated.
I only used compressor because i switched from final cut to adobe. easy fellas!

I have latest QT version, do i need to go back to 7? I have tried VLC also, i usually use that to check CC in mpeg files. I am exporting a QT H.264 for just testing purposes, I need a prores HQ, also this is SD so my sequences are set to 720x486.

Trouble exporting to DVDSP from FCP5

I'm having trouble exporting my sequence into DVDSP4. I've tried using Quicktime Conversion and Quicktime but the sequence doesn't import into DVDSP and neither do the menue templattes. When I attempt to convert to Quicktime a message pops up with "data needs to be rendered first," although the red render bar isn't there. It's just grey in the bar area. What is going on here. HELP!!!

Export self contained and use Compressor to m2v and Dolby2

Trouble exporting to DIAdem

Hi,
I am using a 6070E DAQ card to read the output of a sensor. I am having trouble exporting the data from the labview program to DIAdem.
When my vi stops running, it displays the information on a waveform graph. I right click on the waveform graph and select "Export data to DIAdem", it opens DIAdem but randomly sets some of the values to zero, both the time and the actual readings... Sometimes it's only one or two of the data points, but sometimes (like in the picture), it completely distorts the data. I've attached the vi and also an image of how it exports to DIAdem... The chart should be showing 10 cycles of a 10 Hz sine wave.
Is there anything I can do?
Thanks in advance.
Solved!
Go to Solution.
Attachments:
6070E.vi ‏28 KB
Export from vi.jpg ‏323 KB
DIAdem report.jpg ‏410 KB

Hi Sadegh -
I just wanted to mention as an addendum to Brad's comment that if you want to export to happen automatically, another option is to use an Invoke Node to invoke the "Export to DIAdem" method of the chart/graph - another super easy way to achieve the functionality.
Don't forget that for the greatest flexibility, consider saving your data to file (e.g. TDMS) and then loading it with DIAdem (you can do all of this programmatically, too). This will allow you to save your raw data, invoke custom post-processing, apply your own customized report templates, etc. Just one more option to consider. Let us know how we can help after Brad posts his fixed VI.
Derrick S.
Product Manager
NI DIAdem
National Instruments

With Latest Update, Premiere CC Crashing at 100% Export, with Increased File Sizes

I'm a bit baffled, and hoping someone can help. With the latest update of Premiere CC, I am having trouble exporting to Vimeo. As a filmmaker and educator in Chicago, I do a lot of exporting to Vimeo, up until now with great success. Over the past few days, not only is Premiere crashing at 100% export, but it seems to be exporting larger files than before (and with fewer Vimeo options, I notice, in Media Encoder). Not only did this happen with a 30-minute class exercise straight out of a Canon camcorder, that inexplicably was being exported at around 3 or 4Gs, but more importantly: I am trying to replace the video file on Vimeo of a feature film of mine, and the EXACT same feature film, at the exact same length (82 minutes), with the exact same export stats, that was 3 GB in all it's past successful exports, is now exporting, inexplicably, as a 9 GB file - it's Vimeo HD 1080 - always is. Nothing has changed at all on my end.
This is a problem, as I have several items to export to Vimeo in the coming days. What's going on?
Thanks,
Stephen

One other specific change I've noticed in the export settings is that export is now defaulting to H.264 Match Settings - High Bitrate, whereas before it defaulted to whatever settings I had previously used.

Trouble Exporting MXF from PP Cs6

Hello,
I am having a lot of trouble exporting a sequence of mxf footage out of premiere pro cs6. Whenever I try to export directly from Premiere the program stalls out. I tried sending it to adobe media encoder, which worked temporarily. Now, the sequence doesn't show up in adobe media encoder. I then tried sending turning the sequence into an AE composition, which again worked seamlessly temporarily. I am working with multi-clip sequences and last night I noticed that when I turn my sequence into an AE comp, after effects began referencing the wrong angle. After Effects also began giving me error messages saying that it was having trouble conforming some of the mxf files. Any insight into how I can fix this would be most helpful. I am working on a Mac Pro Ghz-6 Core Intel Xeon.
Thanks!

What exactly do you mean by "multi-clip sequences." Multicam?
If so, try dropping the same source content into a sequence without any multicam edits and see if that exports. That will help determine if the problem is limited to multicam sequences.
Have you tried closing all the apps, confirming through Activity Monitor that all the processes shut down (including pproheadless and dynamiclinkmanager), and then relaunching the apps? Or simply rebooting the system. This feels a bit like a problem where the initial failure to export left things in a bad state, so that you need to clear the decks.
What are your export settings? Do you have similar problems exporting to other formats?
And just to confirm the reference in the thread's title, you're running PPRO CS6, not CC, right?

Trouble Exporting

Hi,
I'm using Adobe Premiere CS3 on my macbook and I have got some troubles with exporting files. I've got the problem with exporting a widescreen PAL Project. When I export my file (I have selected the 1,43 ratio) everything is right in premiere it just shows it 16:9 but when Open it with any other program it shows it as a square. I don't know what to do I've already tried exporting with adobe media encoder but i can't open the files if I do so.
Please anybody help i just think it's a waste of my footage if i can't export it right.

Hi,your keep saying i should changes the settings in the player to 16:9 but
how can i do that? I can't find it in the help function.
2009/4/18 Jim Simon <[email protected]>
If I reinstall Premiere,, could that maybe solve the issue.
>
No. There's nothing wrong with Premiere or your exported files. You need
to adjust the player software to show them correctly.
>

Trouble Exporting with DeNoiser

Similar Messages

Maybe you are looking for