Trouble finding router address

I am trying to connect to my Local University network by cable.
i have IP adddress and subnet mask but no router address.
How do I find router address???
Also I have windows system running perfectly on same cable (with all addresses, but i dont know router add. in either case)

I have had a mac mini since 2005, no issues connecting; I have another mac mini from 2008 intel, a 2009 mbp13" a 2009 imac and never had issues with connectivity; I use my mbp at numerous offices and get wifi access all over town with no issues at all; after reading plenty posts I will consider my self lucky.
I have a wndr3700 and use a/b/g/n;
What i do have issues is with "access list"; I had to reset to factory settings and then only the machines that i registered after the hard reset through mac addresses work; when i tried adding another mbp 13" it renders it useless as it cannot connect, all we get is a "connection time out" message.

Similar Messages

Router Address

I am trying to connect to my Local University network by cable.
i have IP adddress and subnet mask but no router address.
How do I find router address???
Also I have windows system running perfectly on same cable (with all addresses, but i dont know router add. in either case)

The default router address of your 802.11n AirPort Extreme Base Station (AEBSn) is: 10.0.1.1

Having trouble verifying remote routing address

I am trying to via powershell ensure that ADFS replication was successful.
After i enable the remote mailbox and set the remote routing address on the hybrid servers, i need to find a way to query the msol service to ensure that replication was successful before i can set the E3 license to ensure proper account creation and mail
routing...
any help or ideas would be greatly appreciated
I am able to query and make sure the account exists using this command before setting remote routing..
While ((Get-MsolUser -UserPrincipalName $mailusers).userprincipalname -eq $null) {
New-Sleep -s 300
Write-Progress -Activity "Dirsync" -Status "Waiting for Dirsync to Complete"
But have not been able to find a property anywhere to ensure the next replication...

I haven't tested this thoroughly, but in the past, I've looked at the event viewer on the dirsync server.
This is an excerpt from some working code I have:
#Run Dirsync
$StartTime = Get-Date
Import-Module DirSync
Start-OnlineCoexistenceSync -Verbose
## Part 4 ##
# License the mailbox in Office 365
#Wait for DirSync to Finish
While (
(Get-EventLog -LogName Application -Source "Directory Synchronization" -After $StartTime -InstanceId 114).count -eq '0'
write-host "DirSync isn't done yet. Waiting 15 more seconds..." -F Cyan
sleep 15
Mike Crowley | MVP
My Blog --
Planet Technologies

Router address to make my wireless secure

My wireless has never been secure. I am trying to now make it secure but I can't find the IP address or router address for my Airport Express. I have checked the manual. I have searched the web. Any ideas?

When you say that you are trying to make the wireless secure, are you saying that you need to set up security and a password for the wireless network?
If yes, you need to use the AirPort Utility application for this.
It is already on your Mac, located as follows:
Applications > Utilties > AirPort Utility

Setting router address

I access the Internet via an 802.11 Netgear router, which in turn routes packets to ISP-side gateway, and then on to ISP-run NAT.
The Netgear router runs a DHCP server, which assigns requestees IPs from a 10.222.139.* block assigned to me by the ISP.
ISP's gateway is at 10.222.222.254. The Netgear router is configured to give out the router address as part of DHCP lease. The Apple laptop I have seems to be ignoring the setting, insisting that the router is at 10.222.139.2, which is the static address of the wireless router.
I tried working around this bug by trying to specify the gateway address manually, but OS X seems to have the setting disabled when address is assigned by DHCP.
The issue is definitely Apple-related, as I have two laptops running Windows XP, a laptop running Windows Vista, and a laptop running Ubuntu Linux, and they all Just Work without me needing to change any of the settings.
How can I make an Apple laptop either do what the DHCP server tells it, or manually configure it to get the address from DHCP, and hardcode that parts it ignores so the Internet connection works?

What do you mean when you said: "As soon as I change the address under Router IP, and after that enter the new router address (eg 192.168.1.254), I get this phenomenon that I cannot login to the router anymore." Are you entering two addresses? You should only be entering one address.
Please follow this procedure:
1) Power down your entire network. Disconnect the WRT160N from all other devices.
2) Power up the WRT160N and allow it to fully boot (1-2 minutes).
3) Press and hold the reset button for 30 seconds, then release the button and allow the WRT160N to reset and reboot (2-3 minutes).
4) Power down the WRT160N. Connect one computer, by ethernet cable, to a LAN port on the WRT160N.
5) Power up the WRT160N and computer. Login to the WRT160N at 192.168.1.1 .
6) In "Network Setup", change the "Router IP address" from 192.168.1.1 to 192.168.1.254
7) Change the "DHCP server" to "disabled".
8) Click the "Save Settings" button. Wait (3-60 seconds) for the screen to refresh. At this point in time, you will likely be disconnected from the WRT160N. Do not worry about this.
9) Power down the WRT160N and your computer.
10) Next, using an ethernet cable, wire a LAN port on your modem to a LAN port on the WRT160N. Leave one computer wired to the WRT160N. Do not connect anything to the Internet port on the WRT160N.
11) Power up your modem, WRT160N, and your computer. It should work. Using the computer that is wired to the WRT160N, try to access the WRT160N setup page at 192.168.1.254
12) If you still have trouble, repeat above procedure, but give the WRT160N the address 192.168.1.2 , and see if that address will work.
Message Edited by toomanydonuts on 03-27-2009 02:08 AM

No WLAN light, computer can't find router.

NO WLAN light on the WRT54G router. Error message when run CD "can't find router". Somehting I can fix or shoud I take it back? Frustrated

First connect you router with a cable to a PC and open your DOS prompt. (start>run type in cmd and hit enter) From the prompt type in ipconfig /all and look and see if it finds a default gateway with a IP address. It should be by default 192.168.1.1 but may be changed. If you do have a default gateway then type in ping 192.168.1.1 (what ever the gateway is) and hit enter. Do you get 0% loss? If this does not show anything try ruling out the network card by typing in ping 127.0.0.1 and hitting enter. That is a internal loop back which tests the network card. If you get any loss then replace the network card and try again. If you get 0% loss then it is good and try swapping cables and connecting to the router again. If you still can not see the router then it is defective.
Richard Aichner (Ikester)

How to find mac address of a client computer in specified time and port in WIFI WCS Control system

how to find mac address of a client computer in specified time and port in WIFI WCS Control system

WCS record-keeping is very crude.
You'll get the time/date when the client authenticated. You'll get the local inside address but you'll need the router to translate the outside IP address and the port.
You will need a proxy server to determine what sites did a wireless client goes.

What is a router address

and how do i find it??

Depending on your configuration, including router, settings,
and other hardware present, you may not need to input all
the IP settings; the internet provider's equipment often does it.
In your System Preferences> Network> you have to be sure
the means of going online is selected (by checkbox) and it
is dragged to the top of a list of possible ways to go online.
If you have a wireless internet card in the computer, the
AirPort item needs to be checked and given priority over
the others; and if you use Ethernet cable directly, then the
Ethernet item needs to be checked and given priority. More
than one can be checked, but efficiency indicates using one.
In OS X versions earlier than Tiger 10.5.x/10.4.x, the system's
preference panels may be named and laid out differently, so
this is a minor inconvenience in setting up internet access.
Connect to internet - support document:
http://support.apple.com/kb/HT1714
Creating small Ethernet (+ airport) network:
http://support.apple.com/kb/HT1433
Which OS X version do you have, and does the router
support the computer you have? A newer router may
also need to be configured to work with an older 802.x
b/ wireless protocol, since the newer routers often also
support 802.11/n/g and may need to be configured by
wire (ethernet) if you can't do anything with the wireless.
A general search gives clues about a router and address.
' Mac OS X what is router address ' - google results:
I see some definitive results relevant to 'Mac OS X' in the
above, a more generic search would not include that name
in the search and then would cover all kinds of router info.
Your computer's Help in the Finder menu bar should also
list some items relevant to your computer's setup info.
Hopefully this helps you somewhat...
Good luck & happy computing!

How do I find the address -thread - of a file. I used to use spotlight but after switching to Mountain Lion it no longer gives me this.

How do I find the address -thread - of a file. I used to use spotlight but after switching to Mountain Lion it no longer gives me this.

Hold Command-Option while pointing to an item in the Spotlight list. Or Command-Click will show the item in the Finder.

Image Capture and Preview have trouble finding scanner. Photoshop no problem.

Image Capture and Preview have trouble finding the scanner wirelessly unless it is on when the Mac starts up. Photoshop finds the scanner no problem. Any suggestions for Image Capture or Preview?
The scanner is Canon MP620. Mac is MBP, running 10.8.2
I have done all the uninstall, reinstall, update drivers, etc. Please don't bother suggesting that stuff.
Thanks.

As for the scanner - so is this new one wireless? When I hooked up my Epson All-in-One, I had to install it via USB first before I could install the wireless (per their instructions). With Snow Leopard, I simply installed the driver and it covered and recognized both the print and scan function - not so in Lion; I had to go through hoops with the scanner part and it finally showed up as a separate unit. I thought that is silly, but - as long as it works..... I'm trying to think of possibilities since I'm about out of ideas, so you might want to consider that (if it applies). The other troubleshooting suggestions usually include redoing the "add" function after a reboot.
As for Image Capture, I am out of ideas. FWIW, I never use it - in my workflow, there is no need for it. Not sure if this would have an impact, but make sure that you choose Image Capture in the CDs&DVDs Preference Pane (mine is set to ignore or ask purposely):
If that does not work, I'd suggest reinstalling the OS over the top of what you have.

I'm having trouble finding twisted-web

I am running x86_64 and trying to install the twisted-web package and I am having some trouble finding it.
I used the package search on the archlinux.org main page and I found a match, but when I try pacman -Sy twisted-web I get "error: 'twisted-web': not found in sync db".
I noticed that it is supposed to be in the extra repository so I checked my pacman.conf and "Extra" is properly configured (and I have installed packages from it before).
I checked the PKGBUILD that was online and it supports x86_64, I then checked my abs directory to see if the PKGBUILD was there (under my /var/abs/extra/network directory) and I found "twisted" but no "twisted-web".
I also searched AUR for twisted-web and came up with nothing, and I assume this is because it is already in the extra repository.
I am new to Arch and I cannot think of anything else to do. My only other thought is that the package page says "out-of-date" so maybe it has been removed from the extra repository or something along those lines, but that seems like a strange thing to do.
Anyway I really like arch and I have looked at several PKGBUILD's already so if its just a matter of making a build for a new version that would be no problem for me to do (and submit it to AUR or a maintainer) I just need a little guidance. Chances are I'm just inexperienced and missing something really obvious.
Thanks for reading
-pilo

Thanks thats really helpful, what confused me was that when I searched for twisted-web from the main page then clicked -> view cvs entries -> pkgbuild -> view, the PKGBUILD there had "arch=(i686 x86_64)" so I thought I should be able to install it.
Im realatively experienced at compiling programs and programming myself so I will take a stab at getting it to compile myself and submit a new PKGBUILD if I get it working.
Thanks a lot for your help, im really liking arch.

JS/CS3 hyperlinks trouble: finding a hyperlinkTextDestination

I'm having trouble finding a hyperlinkTextDestination in a document.
According to the reference I should be able to refer to a hyperlinkTextDestination by using:
myDocument.hyperlinkTextDestinations.item(myLabel);
This statement returns an invalid object.
I also tried to iterate through the collection of hyperlinkTextDestinations to find the item with my label. Like so:
for(i = 0; i < myDocument.hyperlinkTextDestinations.length; i++)
if(myDocument.hyperlinkTextDestinations[i].label == myLabel)
myDestination = myDocument.hyperlinkTextDestinations[i];
This is not working either. I did set a label to the hyperlinkTextDestination. When this label is encountered myDocument.hyperlinkTextDestinations[i].label == myLabel evaluates to false!
How to solve this problem?
Grtn, Kees

Hi KvD
For hyperlink destination you should provide a string (i.e word or character or insertion point) not a frame. After getting the frame label you have to catch textframe's text then add any one of the above said string. May be this will help you.
Regards
priyan

On the initial set up for apple tv it just sits there trying to set the date and time . it is a wireless setup and the ipaddress and router address is correct . I can't get by this screen

On the initial set up for apple tv it just sits there trying to set the date and time . it is a wireless setup and the ipaddress and router address is correct . I can't get by this screen. The setting is on automatic and I have picked a city in my time zone yet it still tries to set a time and date but fails.
thanks

Make sure router is up to date. Try ethernet to rule out any wifi issues. Reboot ATV and router.

I'm having trouble finding firefox sync on my desktop and to download to my ipad2 for schoolwork!

I'm having trouble finding firefox sync on my desktop AND getting it over to my ipad2. I've been through all the support and still can't find it. Please help! I need it for my schoolwork!

Mam129, I rely on email to stay connected with family and friends so I know how important it is to be able view them on my phone. But don’t worry because I’m here to help.
Are you still unable to set up your email? A fix for the issue has recently been implemented. Please try setting up the email again and keep me posted if you have any issues.
John B
Follow us on Twitter @VZWSupport.

I want a soundbar for my 6th generation nano but am having trouble finding a compatible device. I'd like more than a dock, ideally a soundbar with wireless subwoofer. I'll only use the soundbar for music, not TV home theater. Any suggestions?

I want a soundbar for my 6th generation nano but am having trouble finding a compatible device. I'd like more than a dock, ideally a soundbar with wireless subwoofer. I'll only use the soundbar for music, not TV home theater. Any suggestions? Thanks.

Google

Trouble finding router address

Similar Messages

Maybe you are looking for