Trouble Freezing Row and Column Headers

I have created a report in HFR that is rather large. I need to freeze the row and column headers so that when I do a web preview, they are frozen and I can still see the headers when I scroll right or left or up and down. I have clicked on "Freeze Grid Headers" under the General tab on the Grid Properties sheet, but it only freezes my row headers and not my column headers. How do I get the column headers to freeze as well?
Any help is greatly appreciated.

there is nothing to do with servelts to solve thisCorrect. You may use IFRAME element on your page.

Similar Messages

SSRS Report Freezing row and column while scrolling Issue

Hello,
I have created the report and i have freezed the row and column of the report while scrolling [To Freeze made the changes in tabulex property of the table "Keep Header visible while scrolling"]
meade the changes in the property [Advaned Mode]
Fixed Data= true
Keep Together=true
Keep with group =After
Report on new page=true
When ever i will scroll down my report my all column headder will remains same. after that if i scroll to right my first freeded column headder will not display [group column or freezed row headder].
COuld you please suggest me for the same issue.

Hi Vinay,
Based on my research, freezing row and column headers are different in table and matrix.
In a table, if we want to freeze column header, we should make the changes in the first Static row group in Row Groups pane with Advanced Mode as you said. If we want to freeze row header, the table should have a group ahead, then we can enable “Repeat header
rows on each page” and “Keep header visible while scrolling” options in Row Headers in Tablix Properties dialog box.
In a matrix, if we want to freeze column header, we can enable “Repeat header columns on each page” and “Keep header visible while scrolling” options in Column Headers in Tablix Properties dialog box. If we want to freeze row header, we can enable “Repeat
header rows on each page” and “Keep header visible while scrolling” options in Row Headers in Tablix Properties dialog box.
Hope this helps.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Keeping row and column headers while scrolling inside a Web Dynpro table

Hi,
I have to display a 2x2 matrix with storage location names on the x-axis (i.e. as Column Headers) and material names on the y-axis (i.e. row headers). The table data represents the quantities of a particular material in a particular storage location.
I am using dynamic UI generation to create this table. It can contain as many as 150 columns and almost as many rows. I dont want a page level scrollbar, and hence, have placed my table inside a scroll container UI element with a fixed height and width.
I need a way to let the users use the scrollbars inside the scroll container, but still let them see the row and column headers. Is there a way that I can do this in Dynpro for Java?
Thanks,
Navneet Nair.

Hi Kenn,
You are probably better off posting this request in this forum User Interface Development in ABAP as you are more likely to get a response.
Cheers,
Neil.

Display of Row and Column Headers in NW2004s Bex Analyzer

Hi all,
when I open a query with the NW2004s Bex Analyzer (Excel)Frontend Row and Column Headers are not visible. I need to go to "Tools-Options" and check the box for "Row and Column Headers" which seems to be unchecked by default.
Is there a possibility to make the Row and Column Headers visible by default when I open a query so that I don't have to use Tools-Options every time.
Thanks
Alex

This is fixed with SP8. The default template doesn't have this specified in SP7. It's a very easy fix. Just specify that the column headers are specified by default. Then save this new workbook as the global workbook template such that all queries use this new template. You can customize this standard template however you like!

How to freeze row and column in JTable

Hi,
I need to freeze first two rows and columns in a large JTable. I found ways to freeze either a row or a column, but not both at the same time.
Can any of you help ?
Found this code which allows freezing a col. Similar method can be used to freeze column
import javax.swing.JScrollPane;
import javax.swing.JTable;
import javax.swing.JViewport;
import javax.swing.table.DefaultTableModel;
import javax.swing.table.JTableHeader;
import javax.swing.table.TableModel;
public class FrozenTablePane extends JScrollPane{
public FrozenTablePane(JTable table, int colsToFreeze){
super(table);
TableModel model = table.getModel();
//create a frozen model
TableModel frozenModel = new DefaultTableModel(
model.getRowCount(),
colsToFreeze);
//populate the frozen model
for (int i = 0; i < model.getRowCount(); i++) {
for (int j = 0; j < colsToFreeze; j++) {
String value = (String) model.getValueAt(i, j);
frozenModel.setValueAt(value, i, j);
//create frozen table
JTable frozenTable = new JTable(frozenModel);
//remove the frozen columns from the original table
for (int j = 0; j < colsToFreeze; j++) {
table.removeColumn(table.getColumnModel().getColumn(0));
table.setAutoResizeMode(JTable.AUTO_RESIZE_OFF);
//format the frozen table
JTableHeader header = table.getTableHeader();
frozenTable.setBackground(header.getBackground());
frozenTable.setAutoResizeMode(JTable.AUTO_RESIZE_OFF);
frozenTable.setEnabled(false);
//set frozen table as row header view
JViewport viewport = new JViewport();
viewport.setView(frozenTable);
viewport.setPreferredSize(frozenTable.getPreferredSize());
setRowHeaderView(viewport);
setCorner(JScrollPane.UPPER_LEFT_CORNER, frozenTable.getTableHeader());
}

Hi,
I need to freeze first two rows and columns in a large JTable. I found ways to freeze either a row or a column, but not both at the same time.
Can any of you help ?
Found this code which allows freezing a col. Similar method can be used to freeze column
import javax.swing.JScrollPane;
import javax.swing.JTable;
import javax.swing.JViewport;
import javax.swing.table.DefaultTableModel;
import javax.swing.table.JTableHeader;
import javax.swing.table.TableModel;
public class FrozenTablePane extends JScrollPane{
public FrozenTablePane(JTable table, int colsToFreeze){
super(table);
TableModel model = table.getModel();
//create a frozen model
TableModel frozenModel = new DefaultTableModel(
model.getRowCount(),
colsToFreeze);
//populate the frozen model
for (int i = 0; i < model.getRowCount(); i++) {
for (int j = 0; j < colsToFreeze; j++) {
String value = (String) model.getValueAt(i, j);
frozenModel.setValueAt(value, i, j);
//create frozen table
JTable frozenTable = new JTable(frozenModel);
//remove the frozen columns from the original table
for (int j = 0; j < colsToFreeze; j++) {
table.removeColumn(table.getColumnModel().getColumn(0));
table.setAutoResizeMode(JTable.AUTO_RESIZE_OFF);
//format the frozen table
JTableHeader header = table.getTableHeader();
frozenTable.setBackground(header.getBackground());
frozenTable.setAutoResizeMode(JTable.AUTO_RESIZE_OFF);
frozenTable.setEnabled(false);
//set frozen table as row header view
JViewport viewport = new JViewport();
viewport.setView(frozenTable);
viewport.setPreferredSize(frozenTable.getPreferredSize());
setRowHeaderView(viewport);
setCorner(JScrollPane.UPPER_LEFT_CORNER, frozenTable.getTableHeader());
}

Freezing rows and columns.

I need to know how to freeze the top row and the left column so when you scroll down or left to right that row and column of information stays visible. Can't seem to find in user guide. Thanks in advance.
Dave

As the feature is unavailable, it is normal that it is not described in the Help or in the User Guide.
Some users wrote that we may mimic it activating the mode: "Show Print View".
I'm not sure that it is really what you want.
_Go to "Provide Numbers Feedback" in the "Numbers" menu_, describe what you wish.
Then, cross your fingers, and wait _at least_ for iWork'09
Yvan KOENIG (from FRANCE dimanche 28 décembre 2008 16:28:33)

To freeze row and column in a view.

Hi,
Can anyone advise that is there any way where we can freeze a row and a column in a view.
Many Thanks,
Kate

JTextArea has a replaceRange method.
John

Freezing Rows and Columns Question

In a spreadsheet I have Row 1 Frozen as a Header row for descriptions and headings of different columns of expenses
Is it possible to Freeze the very bottom row of all the totals? I am imagine that you could scroll up and down all the rows in between, but always see the decriptions at the Top Header Row and the Totals at the Bottom Row
Is this possible?
thanks
MS

Trackpad vs Mouse is just a matter of getting used to using the one you will use.
Your profile indicates OS X v10.8 (Mountain Lion), so this answer applies to Numbers '09.
With a trackpad, start by selecting the columns or rows you want to move. Click any cell to activate the table, then position the pointer over the tab of the first column to be selected. If the pointer changes to a vertical line crossed by a double headed arrow, shift it slightly until it changes bck to the selection pointer (black arrow pointing up and left). Then click and drag across the column Header tabs to select the columns.
When the columns are selected, move the mouse pointer to a position just to the left of the letter labeling the first selected column. With the pointer positioned there, use your thumb to press and hold the mouse button/trackpad down, then use a finger to drag the columns down until they 'detach' from the table. Change the direction of drag to move the detached columns to the location where you want them. When the boundary showing where you want to places the columns changes to a thick blue line, release the mouse button/track pad (lift your thumb, but not your finger) to drop the columns into position.
Rows:
Change:
"vertical line crossed by a double headed arrow" to "horizontal line..."
"Drag across the column tabs..." to "Drag down the row tabs..."
"Drag the columns down until..." to "Drag the rows right until..."
Otherwise the same instructions.
Regards,
Barry

Report Writer Row and Column Format

Hi
Was wondering if there is a possible solution to this :-
Understand that column format is controlled by format groups. This means that all figures in the same column will take the same format (such as scaling and decimal place).
Scenario is ->
                    Colunn #1 -> column set as displaying no decimal point
Rev                  120
OP                      5
OP margin %     4.2 -> how to set this to 1 decimal point. Any formula syntax that I can use?
Regards.

Hi Vinay,
Based on my research, freezing row and column headers are different in table and matrix.
In a table, if we want to freeze column header, we should make the changes in the first Static row group in Row Groups pane with Advanced Mode as you said. If we want to freeze row header, the table should have a group ahead, then we can enable “Repeat header
rows on each page” and “Keep header visible while scrolling” options in Row Headers in Tablix Properties dialog box.
In a matrix, if we want to freeze column header, we can enable “Repeat header columns on each page” and “Keep header visible while scrolling” options in Column Headers in Tablix Properties dialog box. If we want to freeze row header, we can enable “Repeat
header rows on each page” and “Keep header visible while scrolling” options in Row Headers in Tablix Properties dialog box.
Hope this helps.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

How can I make Numbers respect the row and column locks in an Excel workbook opened in Numbers???

I have a Windows server app that generates Excel workbooks to be emailed to political campaign volunteers to be loaded into Numbers on an iPad, edited, then emailed back to be posted to the server database. There are two problems encountered:
1. The Excel workbook has the first row (column headings) and first column (route identifier) of cells locked, so that they will not scroll off the screen, but Numbers doesn't respect the locks, so when the user scrolls horizontally or vertically, the column headings and/or the route identifier scroll off the screen.
2. The Excel workbook has pop-up "tool-tip" type comments in certain column headings in order to provide the user with the acceptable entries for those columns, but Numbers does not respect those. When the user touches any of the commented column heading cells, a context menu appears instead of the comment.
What must I do in the Excel workbook sheets, or what settings can be made in Numbers to correct the above?

I imported a Numbers '09 file into Numbers on the iPad. All comments were removed during import. Frozen header row and column were retained.
Thank you for your responses I must ask, however, when you refer to "importing" the Excel file, are you referring to a two step process whereby the Excel file is first converted by some other process into Numbers format, then opened in the Numbers application - which is what I have to do in my PC application to generate the Excel file, and reverse that process to convert the Excel back into my database format - or are you simply referring to opening the file in Numbers as "importing" it? And please excuse any ignorance, as I'm not at all familiar with Apple's terminologies. In fact, I don't own an iPad myself, but rather I have to depend on one of my clients to do the testing for me.
I imported an XLSX file into Numbers on the iPad. The file used "freeze panes" to "freeze" the first column and row. Only warning on import was that it changed fonts. It imported without the first row and column frozen and with no comments. Nothing I can do about the missing comments but it was a simple matter to turn the first column & row into headers and freeze them.
Unfortunately this would not be an efficient solution, since the end users are, for the most part, elderly political campaign volunteers who are fairly computer illiterate. These workbooks are actually canvassing lists - known as walklists. Their purpose is for the volunteers to interview voters, record the results of the interviews, and post the results to a database, which provides the campaigns with valuable strategizing capabilities. Also, these workbooks have multiple pages - as many as 10 or more. and from what I infer from the above, the setting changes would have to be made on each page.
My whole intent in developing this iPad/Tablet methodology was to significantly reduce volunteer's work - which is a recruitment benefit - and eliminate paper. While the latter would be accomplished, the former would not, and in fact would tend to increase it. It's necessary to keep the first row - column headings - and the first column - the route identifier - from scrolling off the page, so that the volunteer won't have to keep scrolling up and down and right and left to know what the data are.
Conclusion: Comments are not supported on the iPad version of Numbers. Frozen headers are not imported from Excel but can be recreated easily.
I was previously directed to the Apple website http://www.apple.com/ipad/from-the-app-store/apps-by-apple/numbers.html which extols the wonders of the Numbers application. About halfway down the page there's a section regarding, "Sliders steppers and pop-ups". The web page states that pop-ups can be set up but, being a marketing site, gives no indication whatsoever as to how it's done. I was hoping someone could tell my if there's any way to carry them over from an Excel file.

Lock rows and columns header in a table view report. It is possible?

hi,
I have a Dashboard that displays a report in "Table View" with many rows and columns.
Is it possible to set a lock on the rows and columns like Excel?
This would have blocked such headers that contain attributes and measures and to browse the report (eg with a scroll bar) had always viewed the headers.
Can you help me?
Thanks

hi,
please go through this discussion
Re: SCROLL BAR to FREZZ HEADERS
thanks,
saichand.v

How Calculate more than one value and store it into to different rows and column for each input?

thx guys.....i have a progress now in LV
But now i have new trouble here. Ok i attached my LV file (LV 7.0.1/7.1) and excel form. I just could'nt calculate more than one input value. I want a different result for each value that i enter ... and store it into different rows and column. But it just store at one row.
Attachments:
My Project.vi ‏31 KB
rumus motor bakar.xls ‏14 KB

duplicate post

Row and column headings

How can I keep my row and column headings fixed on the screen while I scroll through the rest of a large spreadsheet?

Choose Freeze Header Rows in the Table Format pane.
Jerry

Hiding row and column headings in excel

How do I head the row and column headings in excel in docs to go? I have a Q10 and there just isn't enough screen space to also have the letters across the top, and the numbers down the side. How do I get rid of them so I just have the actual spreadsheet itself?
Desktop excel does have this functionality.
David

Choose Freeze Header Rows in the Table Format pane.
Jerry

Dynamic Table - Add rows and columns in same table

Hi there,
I wonder if someone could help please? I'm trying to create and table where a user can add both rows and columns (preferably with separate buttons) but am having trouble trying to figure out how to do this. Is it possible? If so how? I'm not familar with script but have found examples of seprate tables where you can add a row and then another table where you can add columns and essentailly want to merge the two but cannot make it work.
Any help much appreciated!
Thanks,
Ken

It is great example....you can learn the concepts there and apply....however you may have to think twice before you implement column adding dynamically....because the technique here is make copy of what we already have and reproduce it as a new item and this technique works great for rows as they all have every thing in common. But when it comes to columns it may have unique visible identity as column head and displaying repeatedly the same column head may not look good. Of-Course you can do few extra lines of code and change the column appearance based on users input each time. Situations where users need to add additional column is very unlikely (sure your requirement might be an exception).
Key in allowing adding/removing instances is managing design mode settings under Object>>Binding>>....and select the checkbox "Repeat <subform/row/...> for Each Data Item" and then set Min, Max and Initial count values.
Also you need to club your effots by using simple scipt with button clicks....
for the example refered in URL you posted following is what I did to make the first table allow Adding/Removing Rows....
1. Opened the form in LC designer.
2. Add two buttons AddRow & RemoveRow right next to RemoveColumn
3. For AddRow I used following JS code....
 Table1._Row1.addInstance(1);//that means any time this button is clicked a new instance of Row1 is added use _Row2 or Row3 based on your needs
 var fVersion = new Number(xfa.host.version); // this will be a floating point number like "7.05"
 if (fVersion < 8.0) // do this for Acrobat versions earlier than 8.0
 // make sure that the new instance is properly rendered
 xfa.layout.relayout();
4. For RemoveRow I used following JS code....
 Table1._Row1.removeInstance(1);//Syntax is...<objectReference>.removeInstance(<index of the repeating object that needs to be removed>); //in this case since we used 1 alwasys second object from top gets deleted.
 var fVersion = new Number(xfa.host.version); // this will be a floating point number like "7.05"
 if (fVersion < 8.0) // do this for Acrobat versions earlier than 8.0
 // make sure that the new instance is properly rendered
 xfa.layout.relayout();
5. Now time to update settings at Object>>Binding tab and set "Repeat......" and also set Min, Max and Initial count as explained above.
 Those settings needs to be updated for Row1 (or your choice of row) of the table
6. Set the Height to Expand of the Subform, where the table is housed.... this is done under Layout pallet
7. Save the PDF as dynamic template and verify the results...
If you still run into issues I can send you copy that works on my machine, but you need send me an email at n_varma(AT)lycos.com
Good luck,

Trouble Freezing Row and Column Headers

Similar Messages

Maybe you are looking for