Trouble getting internet radio to play

I have Win 7 and IE 10 with all  updates current.  Yet I am still unable to get any internet radio statoins to play on my laptop

This is the forum for Adobe Reader.
You'll need to find a forum for whatever it is you are using to play the radio stations.
Good luck.

Similar Messages

  • Having trouble getting my music to play on my iPad 2 (5.1.1)

    Having trouble getting my music to play, this really annoys me because I spent MY money on itunes for these songs and suddenly they won't work anymore. They've worked in the past so I don't understand what could be going wrong. Only the songs that I've synced to my device from CDs work. I select a song hit the play button and nothing happens, it doesn't work with or withought earphones in. I've tried recycling my device multiple times too and I haven't dropped it recently so I don't know what the problem is. Please help me understand and fix my problem. Thanks in advance

    Hi there:  I had a similar problem with both my iPhone 4s and my iPod Touch 4g.  Sony was very helpful.
    http://www.kb.sony.com/selfservice/documentLink.do?externalId=C1026146
    Basically, unplug the dock for ten seconds, then reset your phone.  Voila!  It worked for me.  Hope that helps.

  • In the last week i hooked up my ipod to change songs, now i can't get itunes radio to play any stations.  How can i fix that?

    i can't get itunes radio to play since i hooked up and synced my ipod.

    Grayed out whee? Computer? On iPod?
    If in iPod that means the music files got corrupted and are lost.
    You can redownload most iTunes purchases by:           
    Downloading past purchases from the App Store, iBookstore, and iTunes Store        

  • I am having trouble getting Flash media to play on my Hubpages

    I am having trouble getting Flash media to play on my Hubpages website - http://everydaygreen.hubpages.com - and am wondering if it can be used on this particular web service or if it is blocked by some of their script. Any help would be appreciated.
    Thanks,
    Trish

    Trisha,
    Thanks for your reply. This forum is for issues with the Edge Code getting started tutorial. For issues with Flash Player, you may want to try the Flash Player forum at http://forums.adobe.com/community/flashplayer
    - Brian

  • AppleTV tries to connect to internet radio while playing music from my Ipad via AirPlay

    As the title says..
    When I play music from my Ipad mini via AirPlay, the sound drops every ten to fifteen seconds.
    On the TV-screen it shows the info about the band, song etc, but when it drops I get a box with "internet radio" written inside, before the sound comes back, and everything is normal again. Very annoying to have the sound cutting like that multiple times during a song..
    AppleTV (gen 3) is wireless connected to a Airport Extreme, and with HDMI-cable to a surround reciever.
    The Ipad and AppleTV have the lates updates (IOS 8.0).
    Tries with a 4S with the IOS 7.1.2 version, but it's the same story with that..

    Hi larsinnj, 
    Welcome to the Apple Support Communities!
    The attached article has some great information on how to isolate and resolve performance issues with AirPlay and AirPlay Mirroring. 
    Resolve issues with AirPlay and AirPlay Mirroring from iPhone, iPad, and iPod touch
    Have a great day,
    Joe

  • Trouble getting internet route table distributet in a VRF

    Hi every one ..
    I'm have some trouble getting distributed the internet routing table between PE routers ...
    CE1 og PE1 works fine, BGP routes all internet routes are shown i en route table, but distributing between PE1 and PE2 is now working .. any one having a clue !!.
    My gold is to move internet access into it's oven VRF, and away from the global routing table
    In the MPLS core aim running the same AS number as our official AS, that we use for peering to the internet..
    snap of configurations
    ***CE1***
    router bgp 65534
    neighbor 172.31.61.55 remote-as 65534
    neighbor 172.31.61.55 description PE-1
    neighbor 172.31.61.55 shutdown
    neighbor 172.31.61.55 update-source Loopback0
    neighbor 172.31.61.55 next-hop-self
    ***MPLS PE1***
    ip vrf NET-INTERNET
    rd 65534:10051
    route-target export 65534:10051
    route-target import 65534:10051
    interface Port-channel1.35
    encapsulation dot1Q 35
    ip vrf forwarding NET-INTERNET
    ip address 172.31.61.55 255.255.255.224
    mpls label protocol ldp
    tag-switching mtu 1546
    tag-switching ip
    router bgp 65534
    neighbor 192.168.0.146 remote-as 65534
    neighbor 192.168.0.146 description PE2
    neighbor 192.168.0.146 update-source Loopback0
    neighbor 192.168.0.146 version 4
    neighbor 192.168.0.146 next-hop-self
    address-family vpnv4
    neighbor 192.168.0.146 activate
    neighbor 192.168.0.146 send-community both
    exit-address-family
    address-family ipv4 vrf NET-INTERNET
    neighbor 172.31.1.2 remote-as 65534
    neighbor 172.31.1.2 activate
    neighbor 172.31.1.2 description CE1
    no auto-summary
    no synchronization
    exit-address-family
    ***MPLS PE2***
    ip vrf NET-INTERNET
    rd 65534:10051
    route-target export 65534:10051
    route-target import 65534:10051
    interface Port-channel1.67
    encapsulation dot1Q 67
    ip vrf forwarding NET-INTERNET
    ip address 172.31.254.1 255.255.255.252
    mpls label protocol ldp
    tag-switching mtu 1546
    tag-switching ip
    router bgp 65534
    neighbor 192.168.0.132 remote-as 65534
    neighbor 192.168.0.132 description PE1
    neighbor 192.168.0.132 update-source Loopback0
    neighbor 192.168.0.132 version 4
    address-family ipv4 vrf NET-INTERNET
    neighbor 172.31.254.2 remote-as 65534
    neighbor 172.31.254.2 activate
    Best regards
    /Peter

    For VPN routes to be exchanged between the two PEs, you first need to configure VPNv4 address family on each one of the PEs.
    Carrying the full Internet routing table over VPNv4 will work but it is not very scalable since all PE routers have to hold the full Internet routing table in the VRF context in addition to potentially full Internet routing table in the global routing table. If you want to exchange full Internet routing table between the two CEs, it would be preferable to use something Carrier Supporting Carrier (CSC).
    Please refer to the following URL for additional information on CSC:
    http://www.cisco.com/univercd/cc/td/doc/product/software/ios120/120newft/120limit/120s/120s23/fscscl23.htm
    Hope this helps,

  • Trouble getting internet access

    I'm having trouble getting the internet to open up using SAFARI when my MAC wakes up.
    When I try to bring it up I get the following message "Redirect Server: Rapid Logic/1.1 MIME-version: 1.0 Connection: close Content-Type: text/html Location:http://launchmodem/redirectBS.htm"
    The only way I get it to work is to type in "http://launchmodem/redirectBS.htm"
    and I get this message "WARNING!
    Unable to resolve your redirection DNS entry
    Please clear browser cache close and then reopen it to try again"
    Then I hit ok and it works.
    Any ideas on why this happens and how to fix it?

    Forgot to mention that I am I am using a wireless router to connect if that is important.

  • I'm having trouble with internet radio thru Airport Express with itunes 7.

    The new itunes 7 is working okay for me except for one thing. For some reason I have a buffering problem between my computer and my Airport Express when I feed internet radio to it. Playing it through my computer speakers works just fine. Normal itunes music files seem to be okay either way. This started happening when I installed itunes 7. I have reset the base station and it hasn't improved things. Is it just coincidence? Anyone got any clues?
    Powerbook 15"   Mac OS X (10.3.9)  

    Same problem here. Some streams are playing correctly and others play in a strange manner, like a mix.
    I also got this problem with iTunes 7. I hope that Apple will fix it in a future update so that I can listen to every station over my Airport Express.

  • I can't get iHeart radio to play in FireFox. Works fine in IE.

    iHeart radio won't play in Firefox. I get other stations, videos, streaming, etc. just fine. Is one of my add-ons interfering?

    If you think it is an add on you can troubleshoot in Safe Mode
    '''Try Firefox Safe Mode''' to see if the problem goes away. [[Troubleshoot Firefox issues using Safe Mode|Firefox Safe Mode]] is a troubleshooting mode that turns off some settings and disables most add-ons (extensions and themes).
    ''(If you're using an added theme, switch to the Default theme.)''
    If Firefox is open, you can restart in Firefox Safe Mode from the Help menu by clicking on the '''Restart with Add-ons Disabled...''' menu item:<br>
    [[Image:FirefoxSafeMode|width=520]]<br><br>
    If Firefox is not running, you can start Firefox in Safe Mode as follows:
    * On Windows: Hold the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
    * On Mac: Hold the '''option''' key while starting Firefox.
    * On Linux: Quit Firefox, go to your Terminal and run ''firefox -safe-mode'' <br>(you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
    ''Once you get the pop-up, just select "'Start in Safe Mode"''
    [[Image:Safe Mode Fx 15 - Win]]
    '''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]] article to find the cause.
    ''To exit Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
    When you figure out what's causing your issues, please let us know. It might help others with the same problem.
    Thank you.

  • Trouble getting internet connection

    Hi, lately, I've been having trouble connecting to the internet. What will happen is, it will only read the network on and off (sometimes it reads it, sometimes it doesn't), and when I do get a signal, it's pretty weak. Even if I click linksys from the top bar, it will try to connect for a few seconds, then just stop trying and now connect. However, when I'm closer to the router, it works fine.
    It's almost as if the signal is just barely reaching my computer, but I know that isn't the case because my PS3 gets perfect internet connection at both of my houses in the same location as my computer, so it must be the computer.
    Any ideas on how to fix it?

    I haven't tried anything really, except for powering everything down and back up.
    But like I said, I've had the exact same problems at different locations with different routers. It's not the router(s), it's my computer, it's the exact same problem no matter where I try it, I'm also not getting a signal from next door (which I always get) unless I go outside near the next door neighbor's house. Unless I'm extremely close to a base, I usually won't pick up a signal, although sometimes I randomly will for a few minutes.

  • Trouble getting internet through Airport Express

    I am trying to set up the most basic wireless network with a cable modem, Airport Express and G4 Powerbook running 10.4.6. I have went through all the steps of setting up the modem then the Airport Express and configuring it with Airport Admin. and all that. I get perfect signal from the express but when I open Safari it doesn't do anything. It doesn't come up with the network diagnostic "Not Connected to the Internet" screen or anything. When I plug my modem directly into the Powerbook through ethernet it works fine.
    It seems as though I am just missing a step or an option or something like that.
    I have also tried to use my roomates old Motorola WA480G wireless router with similar results. I can get Wi-Fi signal through the Airport card but Safari brings up the network diagnostic screen.
    G4 Powerbook   Mac OS X (10.4.6)  
    G4 Powerbook    

    I am having this exact same problem, only using a Dell laptop with Windows XP instead of a Mac. I had my Airport Express set up on a LAN at work a couple of months ago and it worked perfectly. It's been in storage for a couple of months, and now that I am trying to set it up at home with my cable modem, I can't get it to connect to the internet.
    When I plug the modem in with an ethernet cable everything works perfectly. But when I plug it into the airport (after doing the power down/power up process) the LED goes solid green, but nothing will load in my browser. I can use other wireless networks without problem.
    I also can't get it to print anymore. When I plug the printer directly into my computer it prints just fine. But when I plug it into the airport, it won't print. I've set the printer up using Bonjour, and the Airport Admin utility detects the printer. But when I print I get an error message saying that the printer failed to print the document.
    Any ideas?

  • HT204406 I have iTunes match on my computer but cannot get the radio to play without ads on apple tv

    I signed up for itunes match on my computer and it works fine there.  I tried to put in on my apple tv and while it shows my songs and stations I set up, it still plays the radio with ads.  Any suggestions?

    Hello barbarafromedwards,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at:
    Common questions about iTunes Radio
    http://support.apple.com/kb/TS5181
    How do I remove ads from iTunes Radio?
    A subscription to iTunes Match will provide the added benefit of ad-free iTunes Radio.
    iTunes Match subscribers: To remove ads from iTunes Radio, you must turn on this service
    Go to: Settings > General > iTunes Store and enable iTunes Match
    Best of luck,
    Mario

  • How do I get iTunes Radio to play deeper into my list of chosen artists

    I’ve created a “station” with many of my favorite artists but the station seems to be stuck at the top of the list and seldom if ever plays tunes from the artist below the first 6 or 7. I have the station tuned all the way to Discover.
    Thanks

    Chris CA wrote:
    Double click to play it then right click > Open in separate window.
    Or you can set iTunes to always open movies in their own window.
    iTunes prefs > Playback.
    iTunes 10.5 (on 10.6.8) doesn't have a "playback in separate window" option.
    Fortunately, the effectively hidden right-click "Playback Video in Separate Window" option is still available, and this choice holds for future videos.
    I can keep my iTunes window on my left monitor and playback videos on my larger, widescreen middle monitor.

  • Trouble getting Internet Snow Dual Ethernet

    I'm connected to my Snow base station--when I go into diagnostics, I have GREEN lights for:
    Airport
    Airport Settings
    Network Settings
    ISP
    But RED lights for:
    Internet
    Server
    I've tried restarting everything to no avail. The modem is working and the lights are flashing on the base station indicating a connection, but it's not reaching my computer.
    I have a feeling it's the internet settings (address/DHCP and all that other stuff I don't understand).
    Thoughts?
    Thanks!

    michaelbenji wrote:
    I'm connected to my Snow base station--when I go into diagnostics, I have GREEN lights for:
    Airport
    Airport Settings
    Network Settings
    ISP
    But RED lights for:
    Internet
    Server
    I have a feeling it's the internet settings (address/DHCP and all that other stuff I don't understand).
    Launch Network Utility, select the "Ping" tab, enter "discussions.apple.com" (without the quotes) and click the "Ping" button. If the result is 100% packet loss, change the address to "207.246.192.8" (also without the quotes). If the result is "0% packet loss", then there's something wrong with your DSN settings. In AirPort Utility check those settings in the Internet/Internet Connection panel. In System Preferences select the "Network" panel, then the AirPort connection item, click on the "Advanced" button and select the "DNS" tab.

  • Getting The Itunes Radio to Play through my computer

    I installed the Itunes software, but I am unable to get the radio to play after acccessing the rado stations.I click on the radio button. The status bar looks as though it is loading a station. When it is through loading, I assume I am connected to a radio station but I hear nothing. I am using a Dell desktop XPS 400 computer. I am running Windows XP Pro, 2gb ram, 940 DCHT technology. I have a Creative Soundblaster Audigy 2ZS Soundcard. I have DSL internet access. I have tried connecting through all types of Genre, different kbps ratings, but still no sound. It acts as if it has contacted and picked up the URL, The radio acts as if it is trying to get the playlist and says it is downloading playlist, but no list ever appears, and no music ever plays. Please tell me what I am doing wrong. I am new to this Itunes thing, and this type of program access. Forgive my ignorance, but I am willing to listen, follow directions, just need a little advice from someone who has had success in getting their radio to play in the windows environment. I have all the power, and am surrounded by a plethera of top of the line guts, and peripherals. Please feel free to E-mail me directly at [email protected], or here. I would deeply appreciate any assistance and advice anyone could give me. Many thanks to and for your understanding. PLEASE HELP ME, DISGUSTED AND FRUSTRATED PUTTER!!!
    Sincerely & Respectfully,
    Bruce

    You can play a regular song in iTunes and hear it, correct?
    Click Radio and the Genres show up.
    Click on of the Genre and it should drop down say "Refreshing list" and show all radio station in that Genre.
    Double clicking (or click once and select Play) in iTunes and a box should pop up which states "pre buffering" (or something like that).
    Once it is playing, you will see the station, play time and maybe song info in the box at the top of iTunes.
    If it's not working, it could be your firewall blocking it.
    See this -> iTunes: Using the Radio Tuner Behind a Firewall

Maybe you are looking for