Trouble getting settings in iPhoto slideshow to stay as set

How can I get the settings for individual photos on my slideshow to stay as I have set them?  I've unclicked the Ken Burns setting on two photos in a slideshow because the panning cuts out vital parts of the photo, but the setting goes back to the original when I play the preview. 

Hello,
I think the problem is your parameter is a string but your are using Date function in it.... Why are you using a String and not a Date parameter?
Doing a google search I found this http://infolab.stanford.edu/~ullman/fcdb/oracle/or-time.html:
The general usage of TO_DATE is:
TO_DATE(<string>, '<format>')
For strings:
The general usage of TO_CHAR is:
TO_CHAR(<date>, '<format>')
So you may want to look around for examples to meet your needs.
Don

Similar Messages

  • Best settings for iPhoto Slideshow Export

    My aim is to export an iPhoto slideshow (iPhoto ‘11 v9.3.1) and import into the FCP7 sequence with the best possible quality.
    Original video source - Sony camcorder - DV PAL (16.9 anamorphic) imported into FCP7 with a sequence preset of DV PAL 48 KHz Anamorphic (720 x 576)
    Stills for slideshow - 3648 x 2736 Jpeg
    I realise I will lose significant quality to fit the restraints of the DV sequence and so after some tests the best result was through a custom export from iPhoto
    Compression - H.264
    Frame rate changed to 25
    Keyframes & data rate - Automatic
    Quality - Best
    Encoding - Best Quality (multi-pass)
    Size - 768 x 576 SD
    A few thoughts -
    Are there other settings for better results?
    The resulting QT movie had a slightly inferior quality inside Final Cut than when played outside with Quicktime Player
    Any movement over the stills created a strobing/flickering effect inside Final Cut - I have never been able to sort this problem out and now no longer set keyframes to move over stills.
    I have tried a third party software (Industrial Revolution CoverFlux2) with no great improvement re flickering problem and general quality
    The sequence is 16.9 but any attempt to export the slideshow to fit (eg 720 x 576 16.9) stretches the images.

    Original video source - Sony camcorder - DV PAL (16.9 anamorphic) imported into FCP7 with a sequence preset of DV PAL 48 KHz Anamorphic (720 x 576)
    Stills for slideshow - 3648 x 2736 Jpeg
    You're already in FCP7 so why go to iPhoto and then back to FCP?  That just adds layers of encoding which will reduce the final image quality.  As TD pointed out keep it in FCP
    OT

  • Trouble getting images into iPhoto 6

    I'm seeing some similar problems here, but not quite this one. I just upgraded from my old Powerbook to the MacBook Pro. My photos all seem to be in the right place (users/(my name)/pictures/iPhoto Library), but when I try to open iPhoto, I get a message saying "The photo library needs to be upgraded to work with this version of iPhoto."
    So I hit "Upgrade", and I get a progress bar that says "Updating Photo Library." That completes, and the message says, "491 photos have been found in the iPhoto Library folder that are not a part of this photo library. Would you like to import them?"
    I've tried both "No" and "Yes". Either way, in just a couple of seconds I get another dialog saying "33 photos have been found in the iPhoto Library folder that were not imported. Would you like to import them?"
    Again, I've tried both "No" and "Yes". Either way, the dialog goes away, and I see a "Loading photos" message in the iPhoto screen. I have tried just letting this run, but no matter how long it goes, nothing happens, it just keeps saying the same thing with the spinning icon (I've let it run in the background for over a day).
    I've also tried rebuilding the photo library, as described on the support pages, but that didn't help.
    Can anyone help?

    I ended up doing a manual rebuild. There must have indeed been a file or folder corruption or something. I will rebuild the albums, and it looks like everything will be fine. Thanks.

  • Trouble getting Cisco 2600 Series AP to stay joined to WLC 5508

    Hi,
    I have recently been tasked with upgrading our old Autonomous APs to LWAPs.  We have a 5508 WLC at our Virtual Co-Lo and I am using Flexconnect to accomadate local switching and dhcp at our sites.  I have upgraded over 50 APs and joined them to the controller.  These include only 1130AG and 1240AG models.  However they are working flawlessly and staying connected to the controller.  The issue I'm having is with a new batch of 2600 series APs staying connected to the controller.  I have attempted to do research into what may be causing the disconnects but have yet to find a solution.  I am using DNS to resolve the CAPWAP & LWAPP queries from the APs to the controller accross our WAN.  In reading other posts I thought it may be an issue with packets getting dropped but have had our Vendor who manages Sonicwalls at both ends of the WAN confirm for me there is no packet loss.  Below are logs I gathered using puttty from the AP & WLC.  Any help would be greatly appreciated.
    AP I'm doing the testing on:
    NAME: "AP2600", DESCR: "Cisco Aironet 2600 Series (IEEE 802.11n) Access Point"
    PID: AIR-CAP2602I-A-K9 , VID: V01, SN: FTX1740J8V1
    WLC in question:
    Manufacturer's Name.............................. Cisco Systems Inc.
    Product Name..................................... Cisco Controller
    Product Version.................................. 7.3.112.0
    Bootloader Version............................... 1.0.1
    Field Recovery Image Version..................... 6.0.182.0
    Firmware Version................................. FPGA 1.3, Env 1.6, USB console 1.27
    Build Type....................................... DATA + WPS
    System Name...................................... wificontroller
    System Location.................................. Corp
    System Contact................................... Net Engineer
    System ObjectID.................................. 1.3.6.1.4.1.9.1.1069
    Redundancy Mode.................................. Disabled
    IP Address....................................... 10.250.32.8
    Last Reset....................................... Software reset
    System Up Time................................... 190 days 3 hrs 34 mins 24 secs
    System Timezone Location......................... (GMT -5:00) Eastern Time (US and Canada)
    Configured Country............................... US  - United States
    Operating Environment............................ Commercial (0 to 40 C)
    Internal Temp Alarm Limits....................... 0 to 65 C
    --More-- or (q)uit
    Internal Temperature............................. +38 C
    External Temperature............................. +20 C
    Fan Status....................................... OK
    State of 802.11b Network......................... Enabled
    State of 802.11a Network......................... Enabled
    Number of WLANs.................................. 14
    Number of Active Clients......................... 71
    Burned-in MAC Address............................ C8:9C:1D:8C:52:E0
    Power Supply 1................................... Present, OK
    Power Supply 2................................... Absent
    Maximum number of APs supported.................. 100
    Here is the output that keeps on occuring as the AP joins the WLC for a brief time and then changes to standalone mode
    WT-4thFlr-AP3#
    *Dec 14 15:42:04.419: %CAPWAP-3-ERRORLOG: Retransmission count for packet exceeded max(CAPWAP_WTP_EVENT_REQUEST
    ., 3)
    *Dec 14 15:42:11.443: %EVT-4-WRN: Write of flash:/event.capwap done
    *Dec 14 15:42:11.483: %LWAPP-3-CLIENTERRORLOG: Switching to Standalone mode
    *Dec 14 15:42:11.487: %CAPWAP-3-ERRORLOG: GOING BACK TO DISCOVER MODE
    *Dec 14 15:42:11.487: %DTLS-5-SEND_ALERT: Send FATAL : Close notify Alert to 10.250.32.8:5246
    *Dec 14 15:42:11.571: %WIDS-6-DISABLED: IDS Signature is removed and disabled.
    *Dec 14 15:42:21.575: %CAPWAP-3-ERRORLOG: Selected MWAR 'wificontroller'(index 0).
    *Dec 14 15:42:21.575: %CAPWAP-3-ERRORLOG: Go join a capwap controller
    *Dec 14 15:42:12.000: %CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 10.250.32.8 peer_port: 5246
    *Dec 14 15:42:14.303: %CAPWAP-5-DTLSREQSUCC: DTLS connection created sucessfully peer_ip: 10.250.32.8 peer_port: 5246
    *Dec 14 15:42:14.303: %CAPWAP-5-SENDJOIN: sending Join Request to 10.250.32.8
    *Dec 14 15:42:15.127: Starting Ethernet promiscuous mode
    *Dec 14 15:42:15.535: %LWAPP-4-CLIENTEVENTLOG: OfficeExtend Localssid saved in AP flash
    *Dec 14 15:42:15.667: ac_first_hop_mac - IP:10.1.2.250 Hop IP:10.1.2.250 IDB:BVI1
    *Dec 14 15:42:15.667: Setting AC first hop MAC: 0017.c575.a23c
    *Dec 14 15:42:15.855: %CAPWAP-5-JOINEDCONTROLLER: AP has joined controller wificontroller
    *Dec 14 15:42:15.911: %LWAPP-4-CLIENTEVENTLOG: No Flex ACL map configuration file to load. Connect to controller to get configuration file
    *Dec 14 15:42:15.911: %LWAPP-4-CLIENTEVENTLOG: No Flex ACL map configuration file to load. Connect to controller to get configuration file
    *Dec 14 15:42:15.911: %LWAPP-4-CLIENTEVENTLOG: No LS Flex ACL map configuration file to load. Connect to controller to get configuration file
    *Dec 14 15:42:15.915: %LWAPP-4-CLIENTEVENTLOG: No Central Dhcp map configuration file to load. Connect to controller to get configuration file
    *Dec 14 15:42:15.915: %LWAPP-3-CLIENTERRORLOG: Switching to Connected mode
    *Dec 14 15:42:23.639: %WIDS-6-ENABLED: IDS Signature is loaded and enabled
    *Dec 14 15:42:34.615: %CLEANAIR-6-STATE: Slot 0 disabled
    *Dec 14 15:42:34.615: %CLEANAIR-6-STATE: Slot 1 disabled
    *Dec 14 15:45:43.783: %CAPWAP-3-ERRORLOG: Retransmission count for packet exceeded max(CAPWAP_WTP_EVENT_REQUEST
    ., 11)
    *Dec 14 15:45:43.787: %LWAPP-3-CLIENTERRORLOG: Switching to Standalone mode
    *Dec 14 15:45:43.787: %CAPWAP-3-ERRORLOG: GOING BACK TO DISCOVER MODE
    *Dec 14 15:45:43.787: %DTLS-5-SEND_ALERT: Send FATAL : Close notify Alert to 10.250.32.8:5246
    *Dec 14 15:45:43.867: %WIDS-6-DISABLED: IDS Signature is removed and disabled.
    *Dec 14 15:45:53.867: %CAPWAP-3-ERRORLOG: Selected MWAR 'wificontroller'(index 0).
    *Dec 14 15:45:53.867: %CAPWAP-3-ERRORLOG: Go join a capwap controller
    *Dec 14 15:45:44.000: %CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 10.250.32.8 peer_port: 5246
    *Dec 14 15:45:46.315: %CAPWAP-5-DTLSREQSUCC: DTLS connection created sucessfully peer_ip: 10.250.32.8 peer_port: 5246
    *Dec 14 15:45:46.315: %CAPWAP-5-SENDJOIN: sending Join Request to 10.250.32.8
    *Dec 14 15:45:46.487: Starting Ethernet promiscuous mode
    *Dec 14 15:45:49.903: %LWAPP-4-CLIENTEVENTLOG: OfficeExtend Localssid saved in AP flash
    *Dec 14 15:45:50.031: ac_first_hop_mac - IP:10.1.2.250 Hop IP:10.1.2.250 IDB:BVI1
    *Dec 14 15:45:50.031: Setting AC first hop MAC: 0017.c575.a23c
    Here are the results of debug capwap client event on the AP:
    WT-4thFlr-AP3#debug capwap client event
    CAPWAP Client EVENT display debugging is on
    WT-4thFlr-AP3#
    *Dec 14 15:54:58.335: %CAPWAP-3-EVENTLOG: Echo Interval Expired.
    *Dec 14 15:54:58.335: %CAPWAP-3-EVENTLOG: Sending packet to AC
    *Dec 14 15:54:58.335: %CAPWAP-3-EVENTLOG: Echo Request sent to 10.250.32.8
    *Dec 14 15:54:58.343: %CAPWAP-3-EVENTLOG: Resetting reTransmissionCnt to 0
    *Dec 14 15:54:58.343: %CAPWAP-3-EVENTLOG: Queue Empty.
    *Dec 14 15:54:58.343: %CAPWAP-3-EVENTLOG: Echo Response from 10.250.32.8
    *Dec 14 15:55:08.000: %CAPWAP-3-EVENTLOG: Setting time to 15:55:08 UTC Dec 14 2013
    *Dec 14 15:55:25.579: %CAPWAP-3-EVENTLOG: Sending packet to AC
    *Dec 14 15:55:25.587: %CAPWAP-3-EVENTLOG: Resetting reTransmissionCnt to 0
    *Dec 14 15:55:25.587: %CAPWAP-3-EVENTLOG: Queue Empty.
    *Dec 14 15:55:25.587: %CAPWAP-3-EVENTLOG: Wtp Event Response from 10.250.32.8
    *Dec 14 15:55:25.827: %CAPWAP-3-EVENTLOG: Sending packet to AC
    *Dec 14 15:55:25.835: %CAPWAP-3-EVENTLOG: Resetting reTransmissionCnt to 0
    *Dec 14 15:55:25.835: %CAPWAP-3-EVENTLOG: Queue Empty.
    *Dec 14 15:55:25.835: %CAPWAP-3-EVENTLOG: Wtp Event Response from 10.250.32.8
    *Dec 14 15:55:55.835: %CAPWAP-3-EVENTLOG: Echo Interval Expired.
    *Dec 14 15:55:55.835: %CAPWAP-3-EVENTLOG: Sending packet to AC
    *Dec 14 15:55:55.835: %CAPWAP-3-EVENTLOG: Echo Request sent to 10.250.32.8
    *Dec 14 15:55:55.843: %CAPWAP-3-EVENTLOG: Resetting reTransmissionCnt to 0
    *Dec 14 15:55:55.843: %CAPWAP-3-EVENTLOG: Queue Empty.
    *Dec 14 15:55:55.843: %CAPWAP-3-EVENTLOG: Echo Response from 10.250.32.8
    *Dec 14 15:55:56.000: %CAPWAP-3-EVENTLOG: Setting time to 15:55:56 UTC Dec 14 2013
    *Dec 14 15:56:25.735: %CAPWAP-3-EVENTLOG: Sending packet to AC
    *Dec 14 15:56:25.743: %CAPWAP-3-EVENTLOG: Resetting reTransmissionCnt to 0
    *Dec 14 15:56:25.743: %CAPWAP-3-EVENTLOG: Queue Empty.
    *Dec 14 15:56:25.743: %CAPWAP-3-EVENTLOG: Wtp Event Response from 10.250.32.8
    *Dec 14 15:56:25.983: %CAPWAP-3-EVENTLOG: Sending packet to AC
    *Dec 14 15:56:25.991: %CAPWAP-3-EVENTLOG: Resetting reTransmissionCnt to 0
    *Dec 14 15:56:25.991: %CAPWAP-3-EVENTLOG: Queue Empty.
    *Dec 14 15:56:25.991: %CAPWAP-3-EVENTLOG: Wtp Event Response from 10.250.32.8
    *Dec 14 15:56:55.991: %CAPWAP-3-EVENTLOG: Echo Interval Expired.
    *Dec 14 15:56:55.991: %CAPWAP-3-EVENTLOG: Sending packet to AC
    *Dec 14 15:56:55.991: %CAPWAP-3-EVENTLOG: Echo Request sent to 10.250.32.8
    *Dec 14 15:56:55.999: %CAPWAP-3-EVENTLOG: Resetting reTransmissionCnt to 0
    *Dec 14 15:56:55.999: %CAPWAP-3-EVENTLOG: Queue Empty.
    *Dec 14 15:56:55.999: %CAPWAP-3-EVENTLOG: Echo Response from 10.250.32.8
    *Dec 14 15:56:56.000: %CAPWAP-3-EVENTLOG: Setting time to 15:56:56 UTC Dec 14 2013
    Here are the results of debug capwap client packet detail:
    WT-4thFlr-AP3#
    *Dec 14 15:59:01.823: <<<<   Start of CAPWAP Packet  >>>>
    *Dec 14 15:59:01.823: CAPWAP Control mesg Sent to 10.250.32.8, Port 5246
    *Dec 14 15:59:01.823:         Msg Type   : CAPWAP_ECHO_REQUEST
    *Dec 14 15:59:01.823:         Msg Length : 0
    *Dec 14 15:59:01.823:         Msg SeqNum : 44
    *Dec 14 15:59:01.823: <<<<  End of CAPWAP Packet  >>>>
    *Dec 14 15:59:01.831: <<<<   Start of CAPWAP Packet  >>>>
    *Dec 14 15:59:01.831: CAPWAP Control mesg Recd from 10.250.32.8, Port 5246
    *Dec 14 15:59:01.831:         HLEN 2,   Radio ID 0,    WBID 1
    *Dec 14 15:59:01.831:         Msg Type   : CAPWAP_ECHO_RESPONSE
    *Dec 14 15:59:01.831:         Msg Length : 15
    *Dec 14 15:59:01.831:         Msg SeqNum : 44
    *Dec 14 15:59:01.831: 
    *Dec 14 15:59:01.831:      Type : CAPWAP_MSGELE_VENDOR_SPECIFIC_PAYLOAD, Length 11
    *Dec 14 15:59:01.831:         Vendor Identifier  : 0x00409600
    *Dec 14 15:59:01.831:
    *Dec 14 15:59:01.831:
        IE            :   UNKNOWN IE 151
    *Dec 14 15:59:01.831:     IE Length     :   5
    *Dec 14 15:59:01.831:     Decode routine not available, Printing Hex Dump
    *Dec 14 15:59:01.831:
    52 AC 80 46 00
    *Dec 14 15:59:01.831: <<<<  End of CAPWAP Packet  >>>>
    *Dec 14 15:59:20.931: <<<<   Start of CAPWAP Packet  >>>>
    *Dec 14 15:59:20.931: CAPWAP Control mesg Recd from 10.250.32.8, Port 5246
    *Dec 14 15:59:20.931:         HLEN 2,   Radio ID 0,    WBID 1
    *Dec 14 15:59:20.931:         Msg Type   : CAPWAP_CONFIGURATION_UPDATE_REQUEST
    *Dec 14 15:59:20.931:         Msg Length : 93
    *Dec 14 15:59:20.931:         Msg SeqNum : 38
    *Dec 14 15:59:20.931: 
    *Dec 14 15:59:20.931:      Type : CAPWAP_MSGELE_VENDOR_SPECIFIC_PAYLOAD, Length 89
    *Dec 14 15:59:20.931:         Vendor Identifier  : 0x00409600
    *Dec 14 15:59:20.931:
    *Dec 14 15:59:20.931:
        IE            :   RRM_NEIGHBOR_CTRL_PAYLOAD
    *Dec 14 15:59:20.931:     IE Length     :   83
    *Dec 14 15:59:20.931:     Decode routine not available, Printing Hex Dump
    *Dec 14 15:59:20.931:
    00 0A FA 20 08 01 F4 00 07 0A FA 20 08 03 00 01
    01 00 3C 00 B4 2E 06 2E E7 B4 94 51 B2 C7 79 25
    22 FD BE 04 F6 00 00 00 00 00 00 00 00 4F 50 52
    53 2D 57 69 46 69 00 00 00 00 00 00 00 00 00 00
    00 00 00 00 00 00 00 00 00 00 00 00 00 01 06 0B
    01 01 01
    *Dec 14 15:59:20.931: <<<<  End of CAPWAP Packet  >>>>
    *Dec 14 15:59:20.931: <<<<   Start of CAPWAP Packet  >>>>
    *Dec 14 15:59:20.931: CAPWAP Control mesg Sent to 10.250.32.8, Port 5246
    *Dec 14 15:59:20.931:         Msg Type   : CAPWAP_CONFIGURATION_UPDATE_RESPONSE
    *Dec 14 15:59:20.931:         Msg Length : 8
    *Dec 14 15:59:20.931:         Msg SeqNum : 38
    *Dec 14 15:59:20.931: 
    *Dec 14 15:59:20.931:      Type : CAPWAP_MSGELE_RESULT_CODE, Length 4
    *Dec 14 15:59:20.931:         Result Code : CAPWAP_SUCCESS
    *Dec 14 15:59:20.931: <<<<  End of CAPWAP Packet  >>>>
    *Dec 14 15:59:21.139: <<<<   Start of CAPWAP Packet  >>>>
    *Dec 14 15:59:21.139: CAPWAP Control mesg Recd from 10.250.32.8, Port 5246
    *Dec 14 15:59:21.139:         HLEN 2,   Radio ID 0,    WBID 1
    *Dec 14 15:59:21.139:         Msg Type   : CAPWAP_CONFIGURATION_UPDATE_REQUEST
    *Dec 14 15:59:21.139:         Msg Length : 111
    *Dec 14 15:59:21.139:         Msg SeqNum : 39
    *Dec 14 15:59:21.139: 
    *Dec 14 15:59:21.139:      Type : CAPWAP_MSGELE_VENDOR_SPECIFIC_PAYLOAD, Length 107
    *Dec 14 15:59:21.139:         Vendor Identifier  : 0x00409600
    *Dec 14 15:59:21.139:
    *Dec 14 15:59:21.139:
        IE            :   RRM_NEIGHBOR_CTRL_PAYLOAD
    *Dec 14 15:59:21.139:     IE Length     :   101
    *Dec 14 15:59:21.139:     Decode routine not available, Printing Hex Dump
    *Dec 14 15:59:21.143:
    01 0A FA 20 08 01 F4 00 07 0A FA 20 08 0C 00 01
    01 00 3C 00 B4 2E 06 2E E7 B4 94 51 B2 C7 79 25
    22 FD BE 04 F6 00 00 00 00 00 00 00 00 4F 50 52
    53 2D 57 69 46 69 00 00 00 00 00 00 00 00 00 00
    00 00 00 00 00 00 00 00 00 00 00 00 00 24 28 2C
    30 34 38 3C 40 95 99 9D A1 01 01 01 01 01 01 01
    01 01 01 01 01
    *Dec 14 15:59:21.143: <<<<  End of CAPWAP Packet  >>>>
    *Dec 14 15:59:21.143: <<<<   Start of CAPWAP Packet  >>>>
    *Dec 14 15:59:21.143: CAPWAP Control mesg Sent to 10.250.32.8, Port 5246
    *Dec 14 15:59:21.143:         Msg Type   : CAPWAP_CONFIGURATION_UPDATE_RESPONSE
    *Dec 14 15:59:21.143:         Msg Length : 8
    *Dec 14 15:59:21.143:         Msg SeqNum : 39
    *Dec 14 15:59:21.143: 
    *Dec 14 15:59:21.143:      Type : CAPWAP_MSGELE_RESULT_CODE, Length 4
    *Dec 14 15:59:21.143:         Result Code : CAPWAP_SUCCESS
    *Dec 14 15:59:21.143: <<<<  End of CAPWAP Packet  >>>>
    *Dec 14 15:59:25.547: <<<<   Start of CAPWAP Packet  >>>>
    *Dec 14 15:59:25.547: CAPWAP Control mesg Sent to 10.250.32.8, Port 5246
    *Dec 14 15:59:25.547:         Msg Type   : CAPWAP_WTP_EVENT_REQUEST
    *Dec 14 15:59:25.547:         Msg Length : 14
    *Dec 14 15:59:25.547:         Msg SeqNum : 45
    *Dec 14 15:59:25.547: 
    *Dec 14 15:59:25.547:      Type : CAPWAP_MSGELE_VENDOR_SPECIFIC_PAYLOAD, Length 10
    *Dec 14 15:59:25.547:         Vendor Identifier  : 0x00409600
    *Dec 14 15:59:25.547:
    *Dec 14 15:59:25.547:
        IE            :   RRM_LOAD_DATA_PAYLOAD
    *Dec 14 15:59:25.547:     IE Length     :   4
    *Dec 14 15:59:25.547:          slot 0 rxLoad 0 txLoad 0 ccaLoad 33
    *Dec 14 15:59:25.547: <<<<  End of CAPWAP Packet  >>>>
    *Dec 14 15:59:25.555: <<<<   Start of CAPWAP Packet  >>>>
    *Dec 14 15:59:25.555: CAPWAP Control mesg Recd from 10.250.32.8, Port 5246
    *Dec 14 15:59:25.555:         HLEN 2,   Radio ID 0,    WBID 1
    *Dec 14 15:59:25.555:         Msg Type   : CAPWAP_WTP_EVENT_RESPONSE
    *Dec 14 15:59:25.555:         Msg Length : 0
    *Dec 14 15:59:25.555:         Msg SeqNum : 45
    *Dec 14 15:59:25.555: <<<<  End of CAPWAP Packet  >>>>
    *Dec 14 15:59:25.795: <<<<   Start of CAPWAP Packet  >>>>
    *Dec 14 15:59:25.795: CAPWAP Control mesg Sent to 10.250.32.8, Port 5246
    *Dec 14 15:59:25.795:         Msg Type   : CAPWAP_WTP_EVENT_REQUEST
    *Dec 14 15:59:25.795:         Msg Length : 14
    *Dec 14 15:59:25.795:         Msg SeqNum : 46
    *Dec 14 15:59:25.795: 
    *Dec 14 15:59:25.795:      Type : CAPWAP_MSGELE_VENDOR_SPECIFIC_PAYLOAD, Length 10
    *Dec 14 15:59:25.795:         Vendor Identifier  : 0x00409600
    *Dec 14 15:59:25.795:
    *Dec 14 15:59:25.795:
        IE            :   RRM_LOAD_DATA_PAYLOAD
    *Dec 14 15:59:25.795:     IE Length     :   4
    *Dec 14 15:59:25.795:          slot 1 rxLoad 0 txLoad 0 ccaLoad 0
    *Dec 14 15:59:25.795: <<<<  End of CAPWAP Packet  >>>>
    *Dec 14 15:59:25.803: <<<<   Start of CAPWAP Packet  >>>>
    *Dec 14 15:59:25.803: CAPWAP Control mesg Recd from 10.250.32.8, Port 5246
    *Dec 14 15:59:25.803:         HLEN 2,   Radio ID 0,    WBID 1
    *Dec 14 15:59:25.803:         Msg Type   : CAPWAP_WTP_EVENT_RESPONSE
    *Dec 14 15:59:25.803:         Msg Length : 0
    *Dec 14 15:59:25.803:         Msg SeqNum : 46
    *Dec 14 15:59:25.803: <<<<  End of CAPWAP Packet  >>>>
    *Dec 14 15:59:30.375: <<<<   Start of CAPWAP Packet  >>>>
    *Dec 14 15:59:30.375: CAPWAP Control mesg Recd from 10.250.32.8, Port 5246
    *Dec 14 15:59:30.375:         HLEN 2,   Radio ID 0,    WBID 1
    *Dec 14 15:59:30.375:         Msg Type   : CAPWAP_CONFIGURATION_UPDATE_REQUEST
    *Dec 14 15:59:30.375:         Msg Length : 17
    *Dec 14 15:59:30.375:         Msg SeqNum : 40
    *Dec 14 15:59:30.375: 
    *Dec 14 15:59:30.375:      Type : CAPWAP_MSGELE_VENDOR_SPECIFIC_PAYLOAD, Length 13
    *Dec 14 15:59:30.375:         Vendor Identifier  : 0x00409600
            SlotId                  :   0
            Mobile Mac Addr         :   BC:52:B7:E3:17:CB
    *Dec 14 15:59:30.375: <<<<  End of CAPWAP Packet  >>>>
    *Dec 14 15:59:30.375: <<<<   Start of CAPWAP Packet  >>>>
    *Dec 14 15:59:30.375: CAPWAP Control mesg Sent to 10.250.32.8, Port 5246
    *Dec 14 15:59:30.375:         Msg Type   : CAPWAP_CONFIGURATION_UPDATE_RESPONSE
    *Dec 14 15:59:30.379:         Msg Length : 8
    *Dec 14 15:59:30.379:         Msg SeqNum : 40
    *Dec 14 15:59:30.379: 
    *Dec 14 15:59:30.379:      Type : CAPWAP_MSGELE_RESULT_CODE, Length 4
    *Dec 14 15:59:30.379:         Result Code : CAPWAP_SUCCESS
    *Dec 14 15:59:30.379: <<<<  End of CAPWAP Packet  >>>>
    *Dec 14 15:59:30.387: <<<<   Start of CAPWAP Packet  >>>>
    *Dec 14 15:59:30.387: CAPWAP Control mesg Recd from 10.250.32.8, Port 5246
    *Dec 14 15:59:30.387:         HLEN 2,   Radio ID 0,    WBID 1
    *Dec 14 15:59:30.387:         Msg Type   : CAPWAP_WTP_EVENT_RESPONSE
    *Dec 14 15:59:30.387:         Msg Length : 0
    *Dec 14 15:59:30.387:         Msg SeqNum : 47
    *Dec 14 15:59:30.387: <<<<  End of CAPWAP Packet  >>>>
    *Dec 14 16:00:00.387: <<<<   Start of CAPWAP Packet  >>>>
    *Dec 14 16:00:00.387: CAPWAP Control mesg Sent to 10.250.32.8, Port 5246
    *Dec 14 16:00:00.387:         Msg Type   : CAPWAP_ECHO_REQUEST
    *Dec 14 16:00:00.387:         Msg Length : 0
    *Dec 14 16:00:00.387:         Msg SeqNum : 48
    *Dec 14 16:00:00.387: <<<<  End of CAPWAP Packet  >>>>
    *Dec 14 16:00:00.395: <<<<   Start of CAPWAP Packet  >>>>
    *Dec 14 16:00:00.395: CAPWAP Control mesg Recd from 10.250.32.8, Port 5246
    *Dec 14 16:00:00.395:         HLEN 2,   Radio ID 0,    WBID 1
    *Dec 14 16:00:00.395:         Msg Type   : CAPWAP_ECHO_RESPONSE
    *Dec 14 16:00:00.395:         Msg Length : 15
    *Dec 14 16:00:00.395:         Msg SeqNum : 48
    *Dec 14 16:00:00.395: 
    *Dec 14 16:00:00.395:      Type : CAPWAP_MSGELE_VENDOR_SPECIFIC_PAYLOAD, Length 11
    *Dec 14 16:00:00.395:         Vendor Identifier  : 0x00409600
    *Dec 14 16:00:00.395:
    *Dec 14 16:00:00.395:
        IE            :   UNKNOWN IE 151
    *Dec 14 16:00:00.395:     IE Length     :   5
    *Dec 14 16:00:00.395:     Decode routine not available, Printing Hex Dump
    *Dec 14 16:00:00.395:
    52 AC 80 81 00
    *Dec 14 16:00:00.395: <<<<  End of CAPWAP Packet  >>>>

    Under my AP Policies I only have "Accept Manufactured Installed Certificate (MIC)" checked.  I attempted to add the AP based on MAC Address (c0:67:af:6f:25:70) with this certificate type but still have the same issue.  I then ran the following debug on my controller and this is the output I recieve regarding that MAC.  I tried to cut the output short because it get's somewhat redundant but was unsure what exactly to look for in the output.  Should I be selecting a different certificate type?  I am somewhat new to wireless technologies but doing my best to pick things up so if this seems trivial please forgive my ignorance.
    debug pm pki enable
    *sshpmLscTask: Dec 14 20:42:56.450: sshpmLscTask: LSC Task received a message 4
    *spamApTask6: Dec 14 20:42:58.840: sshpmGetIssuerHandles: locking ca cert table
    *spamApTask6: Dec 14 20:42:58.841: sshpmGetIssuerHandles: calling x509_alloc() for user cert
    *spamApTask6: Dec 14 20:42:58.841: sshpmGetIssuerHandles: calling x509_decode()
    *spamApTask6: Dec 14 20:42:58.845: sshpmGetIssuerHandles: C=US, ST=California, L=San Jose, O=Cisco Systems, CN=AP3G2-c067af6f2570, [email protected]
    *spamApTask6: Dec 14 20:42:58.845: sshpmGetIssuerHandles:   O=Cisco Systems, CN=Cisco Manufacturing CA
    *spamApTask6: Dec 14 20:42:58.845: sshpmGetIssuerHandles: Mac Address in subject is c0:67:af:6f:25:70
    *spamApTask6: Dec 14 20:42:58.845: sshpmGetIssuerHandles: Cert Name in subject is AP3G2-c067af6f2570
    *spamApTask6: Dec 14 20:42:58.845: sshpmGetIssuerHandles: Cert is issued by Cisco Systems.
    *spamApTask6: Dec 14 20:42:58.845: sshpmGetCID: called to evaluate
    *spamApTask6: Dec 14 20:42:58.845: sshpmGetCID: comparing to row 0, CA cert >bsnOldDefaultCaCert<
    *spamApTask6: Dec 14 20:42:58.845: sshpmGetCID: comparing to row 1, CA cert >bsnDefaultRootCaCert<
    *spamApTask6: Dec 14 20:42:58.845: sshpmGetCID: comparing to row 2, CA cert >bsnDefaultCaCert<
    *spamApTask6: Dec 14 20:42:58.845: sshpmGetCID: comparing to row 3, CA cert >bsnDefaultBuildCert<
    *spamApTask6: Dec 14 20:42:58.845: sshpmGetCID: comparing to row 4, CA cert >cscoDefaultNewRootCaCert<
    *spamApTask6: Dec 14 20:42:58.845: sshpmGetCID: comparing to row 5, CA cert >cscoDefaultMfgCaCert<
    *spamApTask6: Dec 14 20:42:58.845: sshpmGetCertFromCID: called to get cert for CID 282aef7e
    *spamApTask6: Dec 14 20:42:58.845: sshpmGetCertFromCID: comparing to row 0, certname >bsnOldDefaultCaCert<
    *spamApTask6: Dec 14 20:42:58.845: sshpmGetCertFromCID: comparing to row 1, certname >bsnDefaultRootCaCert<
    *spamApTask6: Dec 14 20:42:58.845: sshpmGetCertFromCID: comparing to row 2, certname >bsnDefaultCaCert<
    *spamApTask6: Dec 14 20:42:58.845: sshpmGetCertFromCID: comparing to row 3, certname >bsnDefaultBuildCert<
    *spamApTask6: Dec 14 20:42:58.845: sshpmGetCertFromCID: comparing to row 4, certname >cscoDefaultNewRootCaCert<
    *spamApTask6: Dec 14 20:42:58.845: sshpmGetCertFromCID: comparing to row 5, certname >cscoDefaultMfgCaCert<
    *spamApTask6: Dec 14 20:42:58.845: ssphmUserCertVerify: calling x509_decode()
    *spamApTask6: Dec 14 20:42:58.856: ssphmUserCertVerify: user cert verfied using >cscoDefaultMfgCaCert<
    *spamApTask6: Dec 14 20:42:58.856: sshpmGetIssuerHandles: ValidityString (current): 2013/12/15/01:42:58
    *spamApTask6: Dec 14 20:42:58.856: sshpmGetIssuerHandles: ValidityString (NotBefore): 2013/08/25/13:01:22
    *spamApTask6: Dec 14 20:42:58.856: sshpmGetIssuerHandles: ValidityString (NotAfter): 2023/08/25/13:11:22
    *spamApTask6: Dec 14 20:42:58.856: sshpmGetIssuerHandles: getting cisco ID cert handle...
    *spamApTask6: Dec 14 20:42:58.856: sshpmGetCID: called to evaluate
    *spamApTask6: Dec 14 20:42:58.856: sshpmGetCID: comparing to row 0, CA cert >bsnOldDefaultCaCert<
    *spamApTask6: Dec 14 20:42:58.856: sshpmGetCID: comparing to row 1, CA cert >bsnDefaultRootCaCert<
    *spamApTask6: Dec 14 20:42:58.856: sshpmGetCID: comparing to row 2, CA cert >bsnDefaultCaCert<
    *spamApTask6: Dec 14 20:42:58.856: sshpmGetCID: comparing to row 3, CA cert >bsnDefaultBuildCert<
    *spamApTask6: Dec 14 20:42:58.856: sshpmGetCID: comparing to row 4, CA cert >cscoDefaultNewRootCaCert<
    *spamApTask6: Dec 14 20:42:58.856: sshpmGetCID: comparing to row 5, CA cert >cscoDefaultMfgCaCert<
    *spamApTask6: Dec 14 20:42:58.856: sshpmGetCID: comparing to row 0, ID cert >bsnOldDefaultIdCert<
    *spamApTask6: Dec 14 20:42:58.856: sshpmGetCID: comparing to row 1, ID cert >bsnDefaultIdCert<
    *spamApTask6: Dec 14 20:42:58.856: sshpmGetCID: comparing to row 2, ID cert >cscoDefaultIdCert<
    *spamApTask6: Dec 14 20:42:58.857: sshpmFreePublicKeyHandle: called with 0x2c5f0cb8
    *spamApTask6: Dec 14 20:42:58.857: sshpmFreePublicKeyHandle: freeing public key
    *spamApTask0: Dec 14 20:43:17.451: sshpmGetCID: called to evaluate
    *spamApTask0: Dec 14 20:43:17.451: sshpmGetCID: comparing to row 0, CA cert >bsnOldDefaultCaCert<
    *spamApTask0: Dec 14 20:43:17.451: sshpmGetCID: comparing to row 1, CA cert >bsnDefaultRootCaCert<
    *spamApTask0: Dec 14 20:43:17.451: sshpmGetCID: comparing to row 2, CA cert >bsnDefaultCaCert<
    *spamApTask0: Dec 14 20:43:17.451: sshpmGetCID: comparing to row 3, CA cert >bsnDefaultBuildCert<
    *spamApTask0: Dec 14 20:43:17.451: sshpmGetCID: comparing to row 4, CA cert >cscoDefaultNewRootCaCert<
    *spamApTask0: Dec 14 20:43:17.451: sshpmGetCID: comparing to row 5, CA cert >cscoDefaultMfgCaCert<
    *spamApTask0: Dec 14 20:43:17.451: sshpmGetCID: comparing to row 0, ID cert >bsnOldDefaultIdCert<
    *spamApTask0: Dec 14 20:43:17.451: sshpmGetCID: comparing to row 1, ID cert >bsnDefaultIdCert<
    *spamApTask0: Dec 14 20:43:17.451: sshpmGetCID: comparing to row 2, ID cert >cscoDefaultIdCert<
    *spamApTask0: Dec 14 20:43:17.451: sshpmGetCertFromCID: called to get cert for CID 183fd2b6
    *spamApTask0: Dec 14 20:43:17.451: sshpmGetCertFromCID: comparing to row 0, certname >bsnOldDefaultCaCert<
    *spamApTask0: Dec 14 20:43:17.451: sshpmGetCertFromCID: comparing to row 1, certname >bsnDefaultRootCaCert<
    *spamApTask0: Dec 14 20:43:17.451: sshpmGetCertFromCID: comparing to row 2, certname >bsnDefaultCaCert<
    *spamApTask0: Dec 14 20:43:17.451: sshpmGetCertFromCID: comparing to row 3, certname >bsnDefaultBuildCert<
    *spamApTask0: Dec 14 20:43:17.451: sshpmGetCertFromCID: comparing to row 4, certname >cscoDefaultNewRootCaCert<
    *spamApTask0: Dec 14 20:43:17.451: sshpmGetCertFromCID: comparing to row 5, certname >cscoDefaultMfgCaCert<
    *spamApTask0: Dec 14 20:43:17.451: sshpmGetCertFromCID: comparing to row 0, certname >bsnOldDefaultIdCert<
    *spamApTask0: Dec 14 20:43:17.451: sshpmGetCertFromCID: comparing to row 1, certname >bsnDefaultIdCert<
    *spamApTask0: Dec 14 20:43:17.451: sshpmGetCertFromCID: comparing to row 2, certname >cscoDefaultIdCert<
    *spamApTask0: Dec 14 20:43:17.451: sshpmGetCID: called to evaluate

  • I can't get iTunes into iPhoto Slideshow.

    Macbook Pro 13" OS Lion 10.7.3
    Iphoto 11 version 9.2.1
    Itunes 10 version 10.5.3
    When I go to make a slideshow in iphoto from an album and I try to change my music to my playlist it just tells me to open Itunes so it can populate the list.  I tunes is open!  It has worked before, but not now.  I have tried to do this in iMovie as well and it says the same thing.
    Any suggestions?

    This problem is typically from a defected or broken XML file in the Music library folder. In order to fix this, go to: ~/Music/iTunes/iTunes Library.xml
    Either delete this file (Move it the trash) or move it to the desktop. Either way, iTunes will have to recreate it. First, of course, QUIT iTUNES!
    If an error occurs (which is likely, because it is a broken file) and you cannot move or delete it, try deleting it with the Terminal.
    Be very careful not to delete the wrong file. The Terminal doesn't simply move the file to the trash, it DELETES IT. Here is what you need to do for this:
         Open up a new Shell and type: rm -rf
         Then, to eliminate confusion or accidents, just drag the file to the shell and the exact path will appear after it.
         Voila! It should be deleted.
    Then, go ahead and open up iTunes. Rename a song or something and the iTunes Library will recreate the iTunes Library.xml file.
    This works the same for just about any iLife application! If there is a problem accessing anything in the Media Browser, find the Library.xml file and delete it, then force the application to recreate a fresh, unbroken copy.
    Hope this helps!
    Here are a few links that should help you out: Deleting a File with Terminal
                                                                      iLife: Cannot See iPhoto Files

  • Trouble getting photos from iphoto to iPhone

    A few months back I had updated my iphone to 4.3.2 (somewhere around there) and it began transferring only a very small subset of the photos from photo to my phone.  After the sync, it would say something to the effect of "Image "DSC_00112" could not be transfered to the iPhone".  However, when I opened open photos on the iphone, only about 450 photos of my 3100 photo library were on the phone.  I read some details in the past that there were others with this problem but that upgrading solved the problem.  Today I upgraded to iOS 5 hoping the problem would resolve.  Now when I choose to sync all photos, it doesn't even give me a dialogue box anymore, but still only a small subset of the photos in my photo library cross over to my iphone.... I don't really know why the phone is not allowing most of my photos to transfer, and I have no notion of how to fix it.  Have tried multiple fixes, including manually selecting albums to transfer, repairing iphoto permissions, etc.  Any help or knowledge on the subject would be greatly apprecaited.
    Thanks,
    Dane

    Try clearing your iPhoto cache on your Mac.
    http://support.apple.com/kb/ts1314

  • I bought an airport extreme (5th gen) and have set it up today. However I am having troubles getting it to co-excist with my already set up ethernet connections which are necessary due to the size of the house.

    Please let me know how I can set it up so it works along with my ethernet cables and downstairs network. I have several ethernet connections that I need to use as they are out of range of the network.

    When trying to connect my AppleTV 3rd gen to another ethernet port of airport extreme with another faster (85mbps) Trendnet ethernet adapter via a different electrical outlet, my extreme goes from green light to flashing amber light and my wifi stops working.
    If the Apple TV was originally setup for WiFi, I suggest that you reset the device back to default settings and then configure it again with Ethernet plugged in. Settings > General > Reset > Reset Settings
    As a test,  connect a spare Ethernet cable of any length (that you know is working) from the LAN <-> port on the AirPort Extreme to the Apple TV for the setup.
    Setup the ATV again and double check to make sure that it is operating correctly
    Change the location of the ATV back to the desired location on the network behind the powerline adapters
    If you have a problem now, the first thing to check is the powerline adapter and or wiring

  • Poor photo quality when exporting iPhoto slideshow

    Does anyone know which setting produces the best quality for an mp4 when creating a DVD using iDVD? I put a slideshow together using iPhoto because I wanted to use the iPhoto scrapbook theme. I exported the iPhoto slideshow using the highest quality (standard display setting) which produces an mp4 1422 x 800 (H.264, 30 fps, 7 Mbps, ~907 MB).
    The iDVD project settings are:
    1) Best Performance
    2) High Quality
    3) Professional Quality
    What doesn't make sense to me is that #1 claims to produce a total ~1GB DVD with a 995 MB movie and shows the Quality level as green.
    When selecting #2, the claim is a total ~643 DVD with a 575 MB movie with Quality in the red.
    When choosing #3, the numbers stay the same as #2 but the Quality goes to yellow.
    Why wouldn't the higher quality settings produce a larger DVD with less compression? Which setting really gives the highest quality?
    The default is #1 (Best Performance) which clearly produces the lowest quality video when compared to the mp4 export from iPhoto (appeared with a higher quality) and when compared with playing the slideshow directly in iPhoto (appeared with the highest quality).
    Would the quality be any higher if I export the iPhoto slideshow using a customized setting? iPhoto custom settings allow the choice of about 10 different compression types from Animation, Apple Intermediate Codec, to DV/DVCPRO - NTSC, to H.264, to MPEG-4 Video, to None (and others not listed here). The frame Rate can also be adjusted from Current (whatever that means), to 8, to 60. The Compressor Quality can be adjusted from Least to Best. Would "None" as the compression type produce the best quality when producing the iDVD?
    The ultimate goal is to display the slideshow on the project at my church. The easiest way to do this is to put it on a DVD. But as described above, the quality decrease from iPhoto direct play of the slideshow is noticeable when moving to the .mp4 and extremely noticeable when putting the .mp4 in iDVD and playing the DVD back.
    Thanks in advance for any suggestions or links to better documentation.

    you just cannot export your slideshows in order to burn DVDs, with the same quality
    That's an issue with iDVD and the DVD standards. All DVD media is downsized to 640 x 480 or the wide screen 720 x 480. It's the nature of DVDs, not iPhoto. If you use the Ken Burns effect in iPhoto you will need to use the largest 4:3 ratio images possible so the zoom and scan of the KB effect is working on the most number of pixels possible.
    I've found that the best final image resolution is obtained by creating the slideshow in iDVD from stills imported from iPhoto at the 4:3 size ratio. The downside to that method is no KB effect and only one transition per slideshow. I play those types of slideshows on a 50" 1020p HD Panasonic plasma TV and the images are quite good. But good is in the eye of the beholder.
    See Jim Symon's post in this iDVD topic: Re: High-definition DVDs. Also search his other posts as he was working out a workflow using Photo to Movie to create high def movies and burn them with iDVD. As I recall he found and posted his workflow at one time.

  • How to access iTunes playlist for iPhoto slideshow?

    In iPhoto 6 when I am setting up a slideshow and click the "Music" button, I am given the option of accessing my full library from iTunes, but my Playlists don't show up anywhere, just the artists' names and individual songs,so I am able to choose just one song for an entire slideshow. How can I access my playlists in the Music settings for iPhoto slideshows?

    I have the same problem, I click the arrows and the list drops but I can only select first tune from , sample, garage band, or library. This happens every time I install an update. In the past deleting iTunes playlist has cured the problem but has not worked this time.

  • IPhoto Slideshow Export Settings for FCP 7

    I made a slideshow using iPhoto '11 that I need to import into Final Cut Pro 7.0.3 so that it can be merged into a longer sequence with a few other things that will eventually be burned onto a DVD using Studio Pro and then set to play in a continuous loop.
    My question is, what settings should I use exporting out of iPhoto? The photos were all taken with a Canon 5D. The sequence that I'll be importing the slideshow into will also have a sequence in it that was shot using the Sony HXR-NX5U. So, the native settings for that clip will be 1920x1080, square pixels, 23,98 fps, Apple ProRes 422 codec. I exported my iPhoto slideshow to match the settings as best as possible - 1920x1080 HD 16:9 was the closest option. I think the one difference is that the slideshow plays at 30 fps while the sequence matches the main video at 23.98 fps.
    My issue is that the slideshow plays fine in iPhoto and even as a stand-alone movie loaded in QuickTime, but once I import it into Final Cut, I get motion artifacts. Even if I bring the slideshow into its own sequence, with the sequence settings matching those of the slideshow, the artifacts are still there. I can get rid of them using the Flicker Filter, but is there a way to resolve this issue during the iPhoto export? Should I be Deinterlacing the source video, leaving it as a progressive movie or selecting interlaced scaling? If it needs interlaced scaling, should I select upper or lower?
    Or, are there better settings to get this slideshow to play better in Final Cut?

    Yes. What we're setting up a booth at an upcoming event and have some promo videos we made, as well as the slideshows. The purpose of bringing them all into FCP was so I could put them all together in the timeline and export them as one big movie, which I'd them bring into DVD Studio Pro and set it to loop over and over.
    Unless, of course, I could keep all the movies separate and create a "Play" button that plays movie #1, but modify the end jump to go to movie #2. Modify the end jump of movie #2 to go to movie #3, the end jump of movie #3 go to #4 and have the end jump of #4 go back to #1.
    Would that work? If so, I can just put everything into Compressor.

  • Is there any way to get 720x576 (ie DV Pal)  from iphoto slideshow?

    I have tried the iphoto forum and have been directed here. Is there any way to get 720x576 (ie DV Pal) for an export from iphoto slideshow? I want to export 200+ photos with random transitions and the ken burns effect. Imovie offers offers automatic ken burns effect via project properties but I can't find a way to add random transitions automaticcally. Is it possible? I want to add the exported file to a movie in Final Cut Studio. Normally I have to resort to using adobe photoshop elements 5 and premiere elements 3 on my bootcamp partition. I would love to do this all in Mac OSX - since leaving Windows, this is the only thing that forces me to use that lousy operating system!
    Thanks in advance for any help.

    I have tried the iphoto forum and have been directed here. Is there any way to get 720x576 (ie DV Pal) for an export from iphoto slideshow?
    Not directly. But you can do it with a bit of external help. Create a slideshow project in iPhoto using the "Random" transitions and auto KBE you want. Then export the slideshow as a 640x480 MPEG4/AAC 30 fps full motion MOV file. Drop the file to MPEG Steamclip and select the "Export to DV" File menu option. The select the DV format, PAL standard, and aspect you want. (I would normally select the "Frame Blending" option in the main menu when going from 30 fps to 25 fps.)

  • What settings do I need to show iphoto slideshow on flatscreen tv -- I have 2007 software

    I have tried to change the settings. The settings in Display (such as 600X800) don't match what comes up on the Samsung tv screen. The tv shows my screensaver when I connect but won't play the iphoto slideshow

    If you connect an external monitor (which may also be a TV or a projector or any other similar device), once you go to system preferencs / displays, you should see settings for each monitor, i.e. internal and external. Do you see this? It is not clear what you mean by ‘I have tried to change the settings’ (how did you do that? explain); also unclear the phrase ‘The tv shows my screensaver when I connect but won't play the iphoto slideshow’. Please explain, does it play on the internal monitor, but not on the external or what?

  • Trouble exporting iphoto slideshow

    I want to share my iphoto slideshow with friends and watch it on my AppleTV.  I tried exporting several different ways and I can't get it to export.  I have iPhoto '09.  Help!

    I tried to export using large format and got this message:  "The operation couldn’t be completed. (OSStatus error -9459.)"  Got same message trying to export in medium format. 

  • Trying to re ord with a live mic but having trouble getting a good record or playback volume. As far as i know all my settings in system preference are correct. What am i missing?

    Trying to record with an external mic, but having trouble getting a good record or playback volume. As far as i know all my settings in system preference are correct. What am i missing?

    MartyJames777 wrote:
    Trying to record with an external mic, but having trouble getting a good record or playback volume.
    http://www.bulletsandbones.com/GB/GBFAQ.html#micline
    (Let the page FULLY load. The link to your answer is at the top of your screen)

  • How do i get my iphoto slideshow to idvd?

    how do i get my iphoto slideshow to idvd?

    Use the Share ➙ iDVD menu option in iPhoto.
    OT

Maybe you are looking for

  • How can I write to data file only near to SW Trigger samples?

    Hi everyone I am working on a model based in this one: http://zone.ni.com/devzone/cda/epd/p/id/34#0requir​ements I would like to save the data once the trigger is reached, with some data near to the impact. Where should I place a "write to measuremen

  • Printing parameter on report - using dynamic parameter in XI

    Post Author: jackel CA Forum: Formula I need to have the following print on the report when using parameter that accepts multiple values: 1 value selected - prints that value 2 or more values selected - prints "multiple" All values selected - prints

  • Graphics(Styles) are not Affecting in HTML Format of Smart Form

    Hi, I have converted a Smartform from PDF format to HTML. but the Graphics ( Styles ) are not Affecting the out put. Can any body Give me the solution.

  • MDG BP(role=Customer) vs MDG Customer

    Hi All,          As I understand,using the Supplier MDG,it can  create a BP either as a Vendor or a Customer depending on the Supplier role chosen. When EHP6 MDG comes with a Customer object,what will be the overlap between MDG-Supplier(role=Customer

  • Possible to use TC as clone of boot drive in Leopard?

    Time Machine seems to take FOREVER whenever I run it, so I end up not running it. I was wondering if it is possible to use Time Capsule as a pure hd and clone my boot drive to it for a full backup option? If so, how? Are there reasons not to?