Trouble getting TV to start

I have had FIOS for the same tv for several years with no problems. Starting a month ago, I have had problems getting the tv to start. Sometimes it starts when I hit the power button. Sometimes I need to hit the power button 5 times to get it to start. Most of the time it starts after 20 attempts and 15 minutes. Restarting the STB does not always help. I received a new STB and it did not help. I bought a new HDMI cord and it does not help. It seems that something is wrong getting the connection to 'ping' or getting the handshake going. Once I get past that point, everything is OK with the tv.
thanks in advance

sounds like the tv is turning on but the hdmi is not catching. SO try two things
set top box auto correct.
menu>customer support>in home agent > set top box auto correct
AND if that doesn't work, test another type of cable between the tv and the set top box. try a component cable, RCA cable or coax cable between the set top box and the tv. If those turn on flawlessly and the hdmi does not, then you know it's a problem with the hdmi port on the tv, the cable or HDMI in general. your work around is going component cables (they are HD) between the set top and the tv. The hdmi might be bad at that point. you've tried multiple set top boxes, so it would not be the hdmi from the sett top box, it would be the hdmi in your TV.

Similar Messages

Trouble getting iCal Server Started

I've got a fully qualified DNS and reverse DNS entry for the Second IP on an OS 10.5 server; 192.168.1.251 setup for ical.domainname.com.
I've got a site set up ical.domainname.com at port 8008.
I've got the iCal server in Server Admin set to ical.domainname.com http port 80008.
When I click Start iCal I get the error message: "No virtual host found for iCal service".
What am I doing wrong?
HELP! Thanks...

I'm stuck with a similar issue and please don't shout at me if it has already been explained above because I didn't understand some of the posts!
We have a small workgroup (only 5 users) and I have just upgraded from Tiger to Leopard Server. The upgrade appears to have considered our setup to be 'advanced' so I do not have access to the Server prefs app and must continue to use Server Admin/WGM. The server runs as an Open Directory Master and also provides AFP, mail & webmail, DNS & firewall services.
I cannot get iCal Server to start. I just get the message 'No virtual host found for iCal Service'. I looked at the previous posts but they seem to relate to an OD server running on 10.4 on a different computer but all my services are on the same server, running Leopard.
Can anyone help?
TIA
James

Have trouble getting it to start up

When I click on the Icon the program shows up in the process tree under Task manager, but the window does nor open up.

Presumably it is running tiger 10.4.11?
It may be able to run Leopard 10.5:
Leopard system requirements:
http://support.apple.com/kb/SP517
But that is as far as the old PPC Macs can go, and Leopard can cost up to $200 on Amazon.

I have been having trouble getting my email on my iPad. It started when I brought it to the US on vacation (I live in London and my email provider is Virgin Media). It worked once since I returned, but that is it. I can send emails, but can't get them

I have been having trouble getting my email on my iPad2.
It started when I brought it to the US on vacation (I live in London and my email provider is Virgin Media). It worked once since I returned, but that is it.
I can send emails, but can't get them.
Any ideas, people?

Hi Kharels
Just posted this reply to 2 others with same sort of question:
I have the same issue as i have my own email address and only want to use.
There are two ways around this annoying problem. The first is to set up your own domain email account alongside your iCloud one, and when you go to send each email tap on From and you get a choice of emails addresses to reply from... ie your own domain or the iCloud one. This is tedious though.
The other is to set up your iCloud email as normal, then create a new one altogether. Choose 'Other' when creating this new account. Then put for the incoming server mail.me.com, along with your user name and password. For the outgoing server put the server you want to use - ie your own domain one. This is therefore a hybrid account and does work.
Now switch off the email for iCloud (leaving on Calendar, Address Book etc). Switch on the email for your hybrid account (which of course is iCloud incoming as well).
Providing you have directed your own domain email address to your me.com one, you will find the iPhone should behave itself and you can use the folders etc and these will synch with your Mac ok.
Hope this work for you - let us know.
Simon

Having trouble getting started with my new shuffle

I am having trouble getting started with my new shuffle. any help?

Hey there Feisty59,
It sounds like you have a new iPod Shuffle, and want to know how to start using it. Here is a great resource for understanding how to use your iPod, and how to set it up and get music synced to it from iTunes:
iPod shuffle User Guide
http://manuals.info.apple.com/MANUALS/1000/MA1550/en_US/iPod_shuffle_4thgen_User _Guide.pdf
If you have a different model of iPod Shuffle, choose yours from the following page and use that guide instead:
Apple - Support - Manuals
http://support.apple.com/manuals/#ipodshuffle
Thank you for using Apple Support Communities.
All the very best,
Sterling

TS3276 I'm now having trouble getting mac mail to work on my mac. The mobile me account works great on iphone and ipad but it won't connect to my mail account. Password is correct. What else can I do? Using OS10.68

I'm now having trouble getting mac mail to work on my mac. The mobile me account works great on iphone and ipad but it won't connect to my mail account. Password is correct. What else can I do? Using OS10.68

HI,
The Apple IDs from @mac.com and @me.com (Older MobileMe and more recent iCloud Names) are also Valid AIM Screen names.
Any other sort of Apple ID is not a Valid AIM Name.
A Google ID that is associated with Google Mail Account (And has "Talk" enable on your Google Settings) can be used in iChat as Jabber Name/ID. (Google Run Jabber server).
Jabber and AIM are different IM Services and it is not easy or straight forward to add Buddies from one Service to the Buddy List of another. (As A Starting point consider it "impossible")
iChat 4 and 5 have links to the registration page of @Mac.com here with a "Get an iChat Account" button in the add (Account) screen (You select @mac.com or MobileMe and then press the Button - Choosing AIM and then pressing the button used to lead to the AIM registration page but AIM moved their page).
Apple IDs can be any valid email (or an @mac.com or iCloud registration)
Therefore you could make a Google ID into an Apple ID.
However this will not be a valid AIM Screen Name the way @mac.com or MobileMe/iCloud ones are.
Valid AIM Screen Names in Table (pic)
7:46 PM Monday; December 5, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Lion 10.7.2)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

I am having trouble getting my My Mac Book Pro 15" Retina to wake up with an Apple Bluetooth Keyboard and Mouse while Docked in a Hengedock vertical docking station.

I am having trouble getting my My Mac Book Pro 15" Retina to wake up with an Apple Bluetooth Keyboard and Mouse while Docked in a Hengedock vertical docking station. The Keyboard and mouse work great with the laptop lid open but when closed in the docking station the bluetooth signal does not seem to transmit. Is there a setting that can be changed to allow an Bluetooth keyboard and mouse to wake the computer while docked?

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

How do I get a clean start for catalog to start all over again?

Running PSE5 on Win XP w/SP3
I have not been able to get any information about how to recover a catalog from files that have been copied as a backup, so it looks like I'm forced to start all over again. There are about 17000 images in the C: drive. The images all seem to be OK. A few days ago there was a properly operating catalog file (and all the others) there, too.
Since then, I have tried to learn how to make the former catalog file operative, but no luck. Since then, I have read that just uninstalling and reinstalling PSE5 will do nothing to give me a clean start - that is, all the old (now problematical) catalog file trouble will still be there.
To start all over again seems like such a waste of time, since I have copies of all the catalog files as they were properly operating in March, but it seems that something important is missing and none of this stuff is useful in any way. I'm not the PSE5 user, so I didn't know about the external catalog backup that can be done from within PSE5 - so the possibility to use that technique does not exist. All I have is a straight copy of everything in the Documents and Settings.. ...Application Data\Adobe folder. I've tried replacing the whole Adobe folder with the backup files, starting PSE5 and looking at the catalog, but that didn't work either. I just get the same old empty catalog.
So, the 'start all over' option seems like the only way out. Anyone who has lost the catalog knows how much work is in the catalog, so any help with either making the old catalog file work through reconstruction somehow, or starting all over again, will be very helpful. Someday, I'd like to learn how this happened. Until then I'll be backing up the catalog file from within PSE5 to an external location... Everytime there's a new entry in the catalog information. That method seems simple enough that even I could do it.
Thanks,
Al
(K3PXR)

I tried to open the resident 'My Catalog.psa' file. PSE5 dutifully did that and the catalog information, such as tags and other information that would normally be present when looking at the Organizer is blank, as if nothing has ever been entered in the catalog.
The 'My Catalog.psa' file is about 600K (according to windows explorer) and resides in the 'Catalogs' folder. Also there are:
My Catalog-2.psa about 3252K
My Catalog-2.psa about 5380K
In the folder: 'Catalog Folders' were the folders:
My Catalog
My Catalog-1
In the folder My Catalog are the files:
backupCt.dat 1K
collstatus.dat 1K
tagstatus.dat 1K
thumb.5.cache 10K
In the folder My Catalog-1 is the file:
tn.4.cache 32394 K
Above I say 'In the folder, Catalog Folders, were the folders My Catalog and My Catalog-1' because last night when shutting down, I didn't know what was in those folders. I was too tired to check.
I did copy everything that was in the Adobe folder and all associated sub folders, including the folders above, to an SD flash card before I started to do anything else. Becasue of this, I should be able to get back to the way it was before I started to do anything, then I opened the catalog file My Catalog-1.psa. It said that it was made from an earlier version, asked to convert it and contained the 2002 to 2004 catalog information. To the best of my knowledge, those photos were never entered in PSE5, and probably were from an earlier version of PS Album.
So, where is the information that was once in the PSE5 catalog? Which files should contain that information? Why can't the files simply be copied from the backup copies back on to the C:\ drive in the proper folders and then upon starting PSE5 see at least the catalog that was present when the copies of the files in the folders above were made? What dumb mistakes could have been made to overwrite the information in the catalog and make the catalog appear empty? If I don't learn this, I'll not be able to prevent it from happening again.
I'm not on the machine with the trouble at the moment, and since it is not my machine, I sometimes have trouble getting to it during normal waking hours. I don't know the exact clicks and keystrokes that got the catalog from its normal function to appearing and functioning as if it is empty..
What exactly are the symptoms of "PSE5 doesn't like..."? The catalog appears and functions as if it is empty - as if nothing ever has been or ever was entered into it. PSE5 Organizer is operating normally as far as I can tell. I cannot seem to locate the former catalog information and it has not loaded the former catalog file information. A new test catalog was made and it opens and shows the thumbnails of its four images. I hope that the test catalog I made didn't overwrite anything that would prevent going back to the original catalog information. The copies of the files can be restored as they were a few months ago, though, because there is a copy of them on an SD card.
Thanks,
Al
(K3PXR)

"Something went wrong. We're having trouble getting to your mailbox right now. Please refresh the page or try again later. If the problem continues, please contact your helpdesk."

Hi,
One of my user was unable to receive email from her desktop outlook, browser and her phone. On her outlook, the status of her exchange is disconnected. Then when she tried to access her OWA, this error prompted below "
"Something went wrong. We're having trouble getting to your mailbox right now. Please refresh the page or try again later. If the problem continues, please contact your helpdesk."
Her emails started coming in again after about 45minutes later. It happened twice today.
Anyone have the same symptoms as mind?

Hi,
When user is disconnected to Exchange, please test outlook anywhere connectivity for this user.
Test Outlook Anywhere connectivity
https://technet.microsoft.com/en-us/library/ee633453(v=exchg.150).aspx
Please also check if there are any other events in application log.
Best Regards.
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Lynn-Li
TechNet Community Support

I am having trouble getting a numbers spreadsheet to hold different formats in the same column. A column with a date formatted heading will not convert to $ for the cells below.   Any suggestions would help.

I am having trouble getting a numbers spreadsheet to hold different formats in the same column. A column with a date formatted heading will not convert to $ for the cells below.   Any suggestions would help.

Hi Wayne,
Thank you for this response. I have tried this but when I start enterring $ amounts some, such as $6.00, go in OK others such as $4.00 appear as a date ie 4 Oct 12.
Kind regards
Paul

TS1424 I am having trouble getting Itunes to open

I am having trouble getting ITUNES to work I have deleted itunes and everything associated with it and reinstalled and I still get the same errors,
The application has failed to start because of MSVCR80.DLL
INTUNES WAS NOT INSTALLED CORRECTLY ERROR 7
THIS APPLICATION FAILED TO START BECAUSE ICUDT49.DLL WAS NOT FOUND

Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2

I am having trouble getting a powerpoint made with keynote to advance with the arrow keys

I am having trouble getting a powerpoint made in keynote to advance using the arrow keys when I save it to a flashdrive.

Hi Wayne,
Thank you for this response. I have tried this but when I start enterring $ amounts some, such as $6.00, go in OK others such as $4.00 appear as a date ie 4 Oct 12.
Kind regards
Paul

When I open my firefox browser my Jeeves is missing and am having trouble getting onto websites

Can't see Jeeves on the opening browser page and I am having trouble getting onto websites any ideas.

Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.org/kb/Safe+Mode
See also:
*[[/questions/860323]]
IncrediMail Help Center: How do I remove IncrediMail MyStart from my Firefox Internet Browser?
* http://help.incredimail.com/incredimail/help_center/help_article.aspx?article_id=276&lang_id=9

New to CS6 Dreamweaver, creating a "Responsive Website" having trouble getting fluid divs to behave

Trying to create a "Responsive Website" and I'm having trouble getting my fluid divs that I create to "break" their link from the "Boilerplate" .
I'm using a "Fluid Grid layout Div" to create a section that has a transparent background of rgba(0,0,0,0.3) and that's perfect, then I add two more "Fluid Grid layout Div's" inside the transparent one to create a 2-column part in the section and that's where the trouble is.
None of the "formatting" I've set for the text in my ID's or Classes are being used - just reverts to what's in the "Boilerplate" i.e. "p,h2,h3" and I can't get it to "break" it's link the "Boilerplate" so I can apply my formatting.
I have been able to select my formatting at times but it is ignored and uses what's in the "Boilerplate".
Kept trying different ways to get it to work and now I've so many of both the ID's and Class's that their not all showing up as an option to be able select them.
I'm missing something basic and after two days it still escapes me.
Please somebody, tell me what I'm missing.
Frustrated

FluidGrid Layouts are not easy to learn. You need a good grasp of fundamental RWD concepts including CSS Media Queries. Keep your layout simple and be patient. The first time I used FGLayouts, I had to start over 9 times before I got acceptable results.
Responsive Web Design
http://coding.smashingmagazine.com/2011/01/12/guidelines-for-responsive-web-design/
Introduction to CSS Media Queries
http://www.adobe.com/devnet/dreamweaver/articles/introducing-media-queries.html
CS6 Fluid Grid layouts (17 min video)
http://tv.adobe.com/watch/learn-dreamweaver-cs6/using-fluid-grid-layouts/
Best advice for beginners:
Build Mobile Layout first. Everything else is based on this primary layout. Then build Tablet layout and finally Desktop. Don't worry about content. Just build the layout & save often during development.
DO NOT TAMPER with the boilerplate.css or FGLayout.css code. Even experts can break the layout in a hurry. Use a separate external style sheet for content and typography styles.
If you're using CS6 ver 12.0, you cannot nest divs inside other divs. Everything must be inside the .gridContainer like this:
<body>
    <div class="gridContainer">
          <div> </div>
          <div> </div>
          <div> </div>
    </div>
</body>
If you care to post a link to your online test page, we can take a look and possibly offer more suggestions.
Nancy O.

I am having trouble getting my Blutooth Magic Trackpad to work in windows 7 running through a bootcamp partition on my 2008 MacPro. Any ideas?

I am having trouble getting my Blutooth Magic Trackpad to work in windows 7 running through a bootcamp partition on my 2008 MacPro. Any ideas?

I installed the apple drivers and it works though unlike
in osx where it works from the start in windows I need to click it once before it begin to work

Trouble getting TV to start

Similar Messages

Maybe you are looking for