Trouble hooking up to i tunes

When I turn my ipod on it shows the usb cable. When I plug my ipod touch into my computer itunes comes up and it says it can't access my ipod because it is locked with a password, to unlock it. I can't unlock it cause it won't leave the screen that has the cable picture on it. I've tried to reset it by holding on/off button and home button, but it goes right back to that picture. I don't know what to do about it. Any advice or help? thanks. I've only had it for 3 months and it's worked perfectly till now

Can you turn your device off? If yes, try to follow this procedure:
1.Disconnect the USB cable from the iPhone or iPod touch, but leave the other end of the cable connected to your computer's USB port.
2.Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the the iPhone or iPod touch to turn off.
3.While pressing and holding the Home button, reconnect the USB cable to iPhone. When you reconnect the USB cable to iPhone, the device should power on.
4.Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears you can release the Home button.
5.Restore in iTunes

Similar Messages

  • Trouble Hooking up E2500 Wi-Fi Router

    I just purchased this router and am having trouble hooking it up to my old HP Pavilion a1250n PC-I am currently using a wireless broadband card to access the Internet-Directions tell me to connect the router to my modem.  I have no external modem.  Do I have to obtain one?
    Solved!
    Go to Solution.

    You probably have DSL service right? Then follow these instructionsions here.  You may have a direct connection with no modem if something like ATT fibre dsl.

  • Have installed MacOsX Lion has trouble hooking up to my StoraNas server with my usual username and password, some who can help me?

    Have installed MacOsX Lion has trouble hooking up to my StoraNas server with my usual username and password, some who can help me?

    This is a common problam discussed on the Netgear forums.  I have yet to see a solution, just comments that there will need to be a fix from Netgear.  if anyone has heard of a solution or of the update being issued, please let us know.

  • My iPad 1 is not responding. I restored to factory settings and when it says to hook up to I tunes it still won't work. I have restarted I tunes and uninstalled and installed and still not working. Help!!!!

    I restored to factory settings and when it says to hook up to I tunes it still won't work. I have restarted I tunes and uninstalled and installed and still not working. Help!!!! Before I reset it it would say not charging but it was still charging. This could be a hardware problem with the I pad.

    Explain exactly what "it won't work" means. The iPad does not respond at all? Does it turnn on? It is not recognized in iTunes when you connect it to your computer?

  • Has anyone had trouble hooking up a WRT350N Wireless N gi...

    Has anyone had trouble hooking up a WRT350N Wireless N gigabit to COX with windows Xp and One care?   I have a toshiba modem, and after 5 hours with Linksys tech assistance and two brand new routers could not make it work?

    What exactly is the problem?

  • Is anyone havong trouble with the latest i tunes down load

    is anyone having trouble with the latest i tunes download

    First, contact Focusrite and make them aware of your LM/Logic problems. I'm communicating with a rep who said he wasn't aware of any issues with LM and Logic.
    Next, I speculate the latest driver of the Version 2 software can't live up to it's claims of variable latency. When I follow the minimum latency of 1032 for the LM manager (as posted on their support site), LM and Logic behave well. The problem for me is I never use 512 in Logic.

  • I have trouble locating my complete I-Tunes Library after signing in to Store. Suggestions?

    I have trouble locating my complete I-Tunes Library after signing in to Store. I can find items I've purchased but not other items added. Any Suggestions? Thx!

    Unless you purchased a subscription to iTunes Match you will only have access to previous qualifying purchases. That's why you should backup your library.
    tt2

  • I just got a new computer and I am haveing trouble loging on to I tunes I keep getting error code 9808 is the itune store down?

    I just got a new computer and I am haveing trouble loging on to I tunes I keep getting error code 9808 is the itune store down?

    Check out this Apple document -> iTunes Store: "An unknown error occured (-9808)"
    You'll probably have to make sure the date and time is correct on your computer.

  • Trouble hooking up linksys router

    i have a linksys wrt54gs router and a verizon dsl/modem/router gt704-wg.finally got the linksys router configured to work with this verizon modem due to the help here from docshady when i spent hrs on the phone with verizon and linksys(were no help)thanks dothe trouble im having is i cant get my other computer to acess the internet.its hooked up with a wireless adaptor and worked fine before i switched to verizon.how do i configure it to work?it runs windows me i think.thanks for any help

    When you try connecting to the wireless networks from the adapter do you get any error message?

  • Trouble hooking up a PC to my wireless network

    I've been using an Airport Express for years now to broadcast wireless internet to my Mac laptop and to my roommate's Mac laptop with no problems. We even had a guest over once with a PC who was able to connect to our wireless network fine once we changed the password to 13 characters.
    But... now I have a new roommate who has a PC (Compaq Presario laptop) and I can't seem to figure out how to get her hooked up to my wireless network that the AE is broadcasting. Her PC detects my wireless network, and when I click on "connect" on her PC her PC does connect (or says it does anyhow), but then her PC says "Limited or no connectivity: You might not be able to access the Internet or some network resources. This problem occured because the network did not assign a network address to the computer."
    Huh? Why not? (Sorry, I'm not very literate in these matters.) Help!

    marsstars, Welcome to the discussion area!
    This message usually appears if you have "access control" (MAC address filtering) enabled and the connecting computer's MAC address has not been added to the list.
    Since this offers no real security, the best solution is to disable "access control".

  • Trouble hooking my Mac up to my Kodak printer dock... help!!!

    Oh boy, do I ever need help! I'm not even sure where else to turn or what to do next, so any and all suggestions are MORE than welcome!!!!!
    I guess the best way to do this would be to copy and paste the email I sent to both Kodak and Apple. Then you can see what it is exactly that's going on.
    "I have the Kodak Easyshare printer dock that I got as a gift in June of 2005. It worked printing pictures off of my old computer (a 2002 Gateway desktop) but that computer crashed and now I have a new Macbook OS X Version 10.4.10. The new computer is not recognizing the printer dock, although I downloaded all of the new software and drivers. My camera is recognized fine, but I can't print from home.
    When I spoke with customer support yesterday, we both uninstalled and installed software and drivers, did a test print from the printer itself (which worked fine) and plugged and unplugged the USB cord multiple times. None of these things worked and the representative suggested I talk to the computer company to see if the problem was there.
    I went into the Apple store today and had a Mac specialist take a look at the computer and programs. He also uninstalled and installed software and checked to see if the printer was being recognized under the system profiler. The specialist could find nothing wrong with the computer, which is brand-new (only about two weeks old) and suggested I call Kodak back and ask that they email me a driver, tell me where to put it in my computer, and hook up the printer that way.
    I called Kodak again today after visiting the Apple store, and spent about an hour on the phone with another representitive, who informed me that the drivers were all located on the website and could not be emailed. We went through a lot of the same procedures that I did with the representitive yesterday and that the specialist did at the Apple store, and the Kodak representitive ended up speaking with her supervisor and telling me that the problem might be with my USB cord. She said to plug my printer into another computer and see if it was recognized under the system profilier printer section. I tested that, and the printer dock was not recognized under the printer section, but was recognized under the USB section.
    If I have used the same USB cord to transfer pictures from my camera to my computer, and if the USB section of the system profiler recognizes that the printer is hooked up, then wouldn't that mean the USB cord is working? Should I buy a new USB cord anyways? If the USB cord is in fact not the problem, and both the printer dock itself and the computer itself are working fine, what are the next steps I should take? I do not want to have to get a new camera and, as the printer dock is working, I don't think it would make sense to get rid of that one.
    I suppose the big question I am asking is where should I turn now to get this problem fixed? I feel as though I've done everything I can, but I still can't print pictures and I would like to be able to. Your support would be appreciated."
    Help me help me help me!!!! THANKS!!!!!

    I was having the same problems as you, but I finally got the Kodak driver recognized. This was on an iMac Core Duo 2 w/10.4.10. Here are the steps I used:
    1. Disconnect the printer from Mac. This is an important step.
    2. Restart the Mac.
    3. Using the CD that came with Kodak printer, uninstall the printer drivers. If you do not have the CD, you can go to folder HD -> Library -> Printers -> Kodak -> Printers, and run the KodakPrinterUninstaller app there.
    4. When done, restart the Mac again.
    5. Now download Kodak Printer Driver package 5.0.0 as linked above from Durante.
    6. Run installer to install driver.
    7. Restart the Mac again.
    8. Now connect the Kodak printer (via USB) and turn on.
    9. Using the steps listed by Durante again, you should be able to see "Kodak Printers" in the pop-up menu. On my system, it is between "HP IP Printing" and Lexmark Inkjet Networking".
    I may have more restarts than necessary, but I did not attempt to optimize my steps. I was just glad I was able to finally recognize the printer. Good luck to you.

  • Trouble hooking up a second computer

    Hello,
    I am trying to hook-up a second computer onto the FIOS router via wire.  The computer is a Dell that was previously used in another home with a DSL link.  The network is configured to automatically get a new IP address but it still retains the old address.  I tried ipconfig /release and then ipconfig /renew.  When I used ipconfig /renew I got a timeout error that said it was "unable to contact your DHCP server"  I have tried multiple ports on the router, including swapping ports with this computer that obviously works.  Any suggestions?

    doodad98..Make sure in network connections that all LAN properties are to obtain IP automatically along with obtains DNS automatically.  Also check internet explorer then under tools/ internet options/ connections make sure never dial a connection is checked & then under LAN settings tab that automatically detect settings is checked. let us know. Also when you do a ipconfig from dos prompt what is the IP address your getting and are you able to ping the default gateway?
    Brett
    Verizon Telecom
    Fiber Solution Center
    Notice: Content posted by Verizon employees is meant to be informational and does not supercede or change the Verizon Forums User Guidelines or Terms or Service, or your Customer Agreement Terms and Conditions or Plan.

  • Trouble hooking up tp itunes !

    For some reason my iphone wont hook up to itnues even with wifi connection.
    I need help !

    Is it your home WiFi, or somewhere public? I ask because some public WiFi providers require you to "agree to their terms" via your web browser before you are actually connected. For example, a free WiFi service at a hotel...turn on WiFi insettings and it finds the provider, and I choose it. The WiFi fan symbol shows on my phone, but until I open Safari (which automatically takes you to their terms and conditions page) and click on "I agree", I cannot access anything via that WiFi connection, including the iTunes store. Took me forever to figure that out but once I did it made sense.
    -SB

  • Trouble hooking up MacBook Pro to Sony bravia tv

    Hello there again, so ive connecting my macbook to my tv using a minidisplayport to hdmi adaptor just fine. The problem is getting the audio to come from the TV. i have a phono plugs 3.5mm [http://www.amazon.co.uk/Cable-Mountain-3-5mm-Phono-Plugs/dp/B000NHOMSQ]which you can find here] and i plug them into the audio in but just no use. I've plugged them into the PC audio in and tried switching the sources to see if the sound will come out, no sound at all.  Any help?
    I use a Macbook Pro 13-inch, Mid 2009
    Software  OS X 10.9.4 (13E28)
    Processor  2.26 GHz Intel Core 2 Duo
    My TV is a Sony Bravia model number Kdl - 40hx803
    The audio plugs are [http://www.amazon.co.uk/Cable-Mountain-3-5mm-Phono-Plugs/dp/B000NHOMSQ]
    if you need any more info dont hesitate to ask 

    Exactly what miniDisplayport-HDMI cable do you have?   That's probably the problem.
    I use the following and it works perfectly between my 2009 MBP and Bravia TV:
    Apple miniDisplayPort-DVI Adapter
    Monoprice.com DVI-HDMI cable
    Also, on the Bravia TVs you are advised to use HDMI #4 input.  I don't know why, that's just what Sony advises.

  • Having trouble hooking up my macbook to my tv. it's not showing up on my tv screen

    it's not showing up on my tv screen. i had a samsung tv before now i have an lg. how do i get it to show up on my tv?

    nevermind got it figured out

Maybe you are looking for

  • How can I avoid Thunderbird timeouts when switching network connections?

    I'm using Thunderbird 24.4.0 but this problem goes back many releases. This problem happens when I switch from an external WiFi network to my company's internal LAN (ethernet). I'm connected to the company's email server via WiFi from home and can ge

  • HT5621 i have this error, cannot sign in the operation couldn't be compleated.(com.apple.ppleaccount error 403.)

    i have I phone 4s facing this error, cannot sign in the operation couldn't be compleated.(com.apple.ppleaccount error 403.)

  • Oracle 8i Question Compile Error

    I have used the following code before on a 10g db but I am having problems getting it to compile on 8.1.7.4 Im pretty sure it should still work thought. create or replace procedure bulk_load as cursor c1 is      select * from schema.table; TYPE t_sel

  • How can i access to components of a table?

    Hi, I have a table and i need to set to some componen's value in the prerrender method. Some components are asociated with the database and others not (i want to modify the second case) . I dont want to modify all rows. What sould i do? Thanks in adv

  • MP4 video

    Why can't I use my ipad2 without having to connect to a computer?  I purchased a MP4 video but I can't download and view it because my old laptop lost it's Internet capability, so I can't sync it.  Suggestions?