Trouble importing Canon XF in CC

After reading all the current posts on Canon XF, I thought it best to ask this question.
Working in Premiere CC 7.1.0
I just started to notice some issues with footage I am bringing in from ShotPut transferred Canon XF media off my edit array.
The first issue was that there were no spanned clips showing up, and that they were all the clips wer starting at the exact same time. After trying to reset the timecode unsuccessfully a few times on the clips, I then created spanned files in XF Utility, so I could work around that issue.
Now I am importing a different project and I am getting entire cards that won't import using either the Media Browser or File/Import. I can import each file individually, but thought that this was riduclous to do for 40 clips on a piece of software that claims flawless integration with camera formats.
What in the world is going on with this? I am just noticing this since going to Creative Cloud, and after I moved to 7.1.0
For the record I have since updated the C300 firmware to the latest "Safe" firmware 1.0.9.
Any ideas?
thanks,
p

Thanks, but too late for this issue as the card have already gone out on another job.
But I did have the spanning problem with file directories transferred via Finder in a different shoot/edit.

Similar Messages

Trouble Importing Canon XF Files at 1080 60i (59.94i)?

I am completely new with Premiere Pro and editing in HD for that matter. I am still using the trial version of Premiere Pro CS5.5. My issue is that I shoot on an Canon XF300 at 1080 60i. When selecting a new project I select the following Preset [Canon XF MPEG2 1080i30 (60i)]. This is the only Preset setting I see that is 1080i and at 60i?
My issue is that I can view my XF files in the Media Browser and their properties read 59.94i, however when I import them into PP CS5.5 their properties then read 29.97 fps.
I shoot fast moving objects that require the 60i setting - how can I import these Canon XF 1080 60i (59.94i) clips into a project/sequence with the same 59.94i setting? I have looked at the manual and additional published articles and thought my issue was due to me using the Trial version, however in CS5.5 it is supposed to have all codec support so I think I ruled that out.
Any help will be much appreciated!!!
Thanks!
Chris

Thanks Jim for the response - so I am using the correct setting after-all. Apparently I do not understand the difference between frame rate and field rate.... it has been a truely monumental learning curve shooting with this camera and now this editing software. I am having fun with the stunning footage but it has been frustrating at times.
One additional question - why does the Media Browser list the "Frame Rate" of these clips as 59.94i and in the Project folder the "frame rate" is 29.97 fps? - Is it because the 29.97 FPS is literally 30 frames displayed per second and the 59.94i is the interlaced 60 frames to make the 30 fps? Obviously you can probably tell I am a novice.
I should then expect that this playback of this "60i" footage on my computer display will not look as smooth as the playback through a blu-ray on a HD TV?
Thanks again and I appreciate the help!

I am having trouble importing canon camera raw cr2

could not import RAW files from card reader i am useing a canon 50D and it produces CR@ files.
is iPhoto unable to process canon raw?

The Raw from very model of camera - that's model, not make - is different. The Cr2 your 50D produces is not the same as a CR2 from a 40D.
So, yes, iPhoto is able to process Canon Raws from supported cameras.
Your 50D is supported by 10.6 and iPhoto 11. Did you get any error messages when you tried to import?
Regards
TD

Trouble importing from canon t4i into imove

So I have a canon t4i and I've been having trouble importing my videos from my memory card to imovie, and iphoto wont even let me upload it. I tried converting it to AVI (which took a few hours) and It's still not doing anything. I don't know what to do and it's really frustrating.

Hello Samantha3232,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
Some video clips may not import into iMovie when using the Camera Import window
http://support.apple.com/kb/TS4485
From the File menu, choose Import > Movies.
In the dialog that appears, select your camera from the sidebar.
Locate and select the video clips on your camera that you would like to import.
Click the Import button.
Best of luck,
Mario

Trouble importing from Canon HG10

I have a Canon HG10 camera (HDD, AVCHD). I'm having trouble importing to iMovie '09 (8.0.6).
Initially the camera was not being detected by iMovie at all (it did mount on the desktop). Searching the forums (here and elsewhere) it seemed that this was a common problem with the HG10, and that the solution was often to initialize the camera's HD (through the camera's own menus). Unfortunately this wipes out all the movies already on the camera, and I had several hours of critical footage on the camera. I decided to try it anyway, making a copy of the HD's entire contents to my machine before initializing.
Initializing did fix the problem. I recorded a short clip on the newly blank camera, and upon connecting to my machine iMovie detected it immediately and I was able to import.
My dilemma now is that I need to somehow import the several hours of footage that I had copied to my machine before initializing the camera. In one forum it was suggested that I could use the "Import Camera Archive..." option in iMovie, and point it to the backup copy of the camera's contents that I had made. When I do this I get the message "Folder is Not a Camera Archive".
I tried copying the old contents of the HD back onto the newly initialized camera to see if it would be detected. No luck — camera reverts to not being detected and must be initialized again.
Suspecting that the auxiliary files in the camera's folder structure might be the issue, I tried selectively copying files from the backup copy over to the camera's folder structure (e.g. just the MTS files). This didn't work (surprise surprise).
I see in other forums that it's possible to get raw MTS files into iMovie, but since I have all the files in the original camera structure it seems there should be an easier way.

Hello jam27
Had the same situation once with the same Camera
I used Handbrake http://handbrake.fr/downloads.php to convert to mp4 H.264 Codex Large file size
Import this into iMovie it takes time but at least you can recover this .
I kept still the original MTS files just in case as backup Cheers Herb

Having trouble importing select pictures from a cd to my iphoto library

I am having trouble importing (and viewing) my vacation photos from a cd to my iphoto library. Some of the photos I can view in finder, but when i click on the rest, I get a message that says "Item xxxx.jpg is used by mac os x and cannot be opened". When I tried to import the photos to my library... the ones I could view imported no problem, the ones I couldn't view will not import and I get a message saying "unreadable files: the following files could not be imported (they may be an unrecognized file type or the files may not contain valid data)". I am just sick that I cannot find these photos!!! =( especially since I had them on iphoto before I cleaned out my computer (so I've had them in my library before). Any ideas? I am in desperate need of help! =(
P.S. When I try to move the pictures to my desktop, I get a notice that says, "you may need to enter the name and pasword for the administrator on this computer to change the item named xxxx.jpg"... when I click continue, another message pops up and says, "the item xxx.jpg contains one or more busy items that cannot be changed"

Welcome to the Apple Discussions. What do you have set in the System/CDs and DVDs preferences to do when a disk is inserted? If the option is not set to the Finder do so and see if that will make any difference.
Otherwise boot into Safe Mode and see if you can copy the files from the CD to a folder on the Desktop. Boot back into your normal account and see if you can import. Or import while still in the Safe Mode.
Do you Twango?
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've written an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.
MBP 2.16Ghz; G5 Dual Core 2GHz, 2G RAM ea, 250G HD; G4 Dual 1Ghz, 1.5G RAM; Mac OS X (10.4.10) 22" LCD, 710G FW HDs, Canon: SD700IS/i850/LIDE 50, Epson R200, 30G iPod, 2G Nano

Trouble importing scanned photos in pse8

I'm having trouble importing scanned photos into pse8. I'm using pse8 on a mac with ver 10.5.8 os. The scanner is a lexmark s405. This is the message I get: "This file was created to be viewed on a television screen, but will appear compressed on your computer monitor. It is recommended that you use a video monitor to priview and edit this image." The photos do look normal on my screen, but the file sizes are huge, as in about 1 px per inch. Can anyone point me in the right direction for a remedy?

hi miss....
even though m a Nikon guy :> Canon makes one of the best scanner components around. they used to make alot of the scanner parts for other companies under the other company names.
remember though, that if u buy an all-in-one u might be waiting for repairs for different functions of the combos. (scanners, printers, faxs, ect.)
as cheap as they are getting ????
good luck
david :>

Why am I having trouble importing vCards? I follow the Help Center instructions by dragging and dropping, but some don't sync into the cloud. And why can't I drag multiple vCards? I have over 4,000. Please tell me I don't have to do one at a time?

Why am I having trouble importing vCards? I follow the Help Center instructions by dragging and dropping, but some don't sync into the cloud. And why can't I drag multiple vCards? I have over 4,000. Please tell me I don't have to do one at a time?

carolinechx wrote:
i know the description may be a little bit too confusing
Mostly because you are not using any capital letters or paragraph returns and your post is difficult to read.

Trouble importing from Photoshop CS2

I'm have trouble importing my photoshop files to iphoto, the pictures come in black, and when I open them they are inverted?
Any help out there?

mrdstone
What color space are the pics? iPhoto supports RGB, if they are another - such as CMYK or GrayScale this will cause problems.
Regards
TD

FireWire is the only way to import Canon HV20 Camcorder videos into iMovie?

As a followup to my last post a moment ago tonight 1/30/08:
Is it true that I need a FireWire cable to import Canon HV20 Camcorder videos into iMovie?
If so, the Apple salesperson is wrong.
He told me last Monday that purchasing the new iLife 2008 (that contains iMovie 2008) would allow me to use my current USB cable.
Given I see NO FireWire port on my new MacBook Pro (bought in 8/2006), I don't see a solution.
Note the camera, an HD camcorder (the Canon HV20) did NOT come with a FireWire cable; it only came with a USB male plug on one side of the cable and the other is a small square-like male plug that connects to a female port on the Canon HV20.
Solution?
Thanks for any suggestions, Daniel

The USB cable is for importing still photographs. Not video.
The firewire 400 cable you need is one that goes from the 6 pin full size male connector to the small 4 pin form used for DV.
The cable plugs into the camera in a socket behind a plastic flap near the eyepiece. Its marked HDV/DV. The other end plugs into the MBP on the right-hand side. 4th from the back.

Trouble importing contacts from a tab-delimited file into Contacts on 10.9.5

I am having Trouble importing contacts from a tab-delimited file into Contacts on MacBook Pro, OS 10.9.5, Intel 2.4 GHz Core 2 Duo., 400GB drive, 4GB memory DDR3
So far I have:
- Followed closely the help screen in Contacts app
- Modified my source document meticulously - first in MS Word, then copied and tweaked in Apple's "Text Edit" app
- The problem arises when I go to access the document for import. Specifically, the target document, and all others in that file, are "greyed out" and thus can't be "opened" to facilitate the import process
- Tried changing the extension of the document name to ".txt", ".rtf", and ".rtd". No change or improvement.
- Searched Apple.com/help and found nothing relevant
Can anyone offer some advice or tell me what I may be overlooking in this process?
Any help will be greatly appreciated!
Thanks,
<Email Edited By Host>

Hi Rammohan,
Thanks for the effort!
But I don't need to use GUI upload because my functionality does not require to fetch data from presentation server.
Moreover, the split command advised by you contains separate fields...f1, f2, f3... and I cannot use it because I have 164 fields. I will have to split into 164 fields and assign the values back to 164 fields in the work area/header line.
Moreover I have about 10 such work areas. so the effort would be ten times the above effort! I want to avoid this! Please help!
I would be very grateful if you could provide an alternative solution.
Thanks once again,
Best Regards,
Vinod.V

Trouble Importing Files PSE 7 to Windows 7 (32 bit)

I am attempting to install PSE 7 into a computer running Windows 7, 32 bit.
The installation was a success to the extent that I was able to connect a catalog containing a huge amount of photos, (180,000 +) to the organizer, and after several hours of "generating thumbnails" the installation seemed to have stabilized.
However, when I try to import new photos, the "get photos from files and folders" operation takes ridiculous amounts of time, and is sort of "hit or miss" in that it sometimes it hangs altogether and I have to use "task manager" to shut down PSE.
Other than this, the program seems to be working normally (!) or maybe (?)
I have tried various compatibility modes, (XP SP2, Vista, Vista SP 1 & 2) with very little difference in results. Well, maybe Vista SP 2 was a tiny bit better.
The computer this is installed in is a Pentium C2D 2.8Ghz (E6300) w/ 2 GB of DDR2 800Mhz RAM. So, it's got plenty of "juice" to deal with PSE's requirements.
My photo files are stored in folders & sub-folders on a separate internal HDD (750GB WD).
Both PSE 5 and 7 work on 3 other computers containing the identical catalogs and photos, in basically the same configuration, including separate storage drives for each. These machines are running Windows XP SPs 2 or 3 (I use multiple computers as a back up strategy, copying the entire existing HDD to another, then install the drive into another machine, import the catalog file into PSE, and change the HDD letter to match that of the existing catalog). Done this way, the PSE installation is identical to that in the previous machine, and is up and running rapidly.
launching such a large catalog takes a bit of time to initialize, or search (understandably), but on these other machines there is no trouble importing, locating, or managing files.
I should add that on the Windows 7 machine, Windows Explorer works quite well in accessing all of the photo files, so this sort of rules out a problematic Hard drive.
Any ideas would be greatly appreciated.

Mr. Ellis, PSE 7 is simply not permitting me to drag folders from Windows Explorer into the organizer. It just blows up the dreaded "black circle with diagonal slash", and that's the end of the issue, at least as far as PSE 7 is concerned.
Since I've had to terminate this program abnormally several times, it resets the preferences upon restart. The other day it hung when I was trying to set preferences, so as you might expect, I'm very cautious about making changes. I don't know if changing any preferences would enable drag and drop, I'm just trying to illuminate the eggshells I'm walking in trying to stabilize the program.
In answer to your question, about the "documents and settings folder", no, I'm not using in any of my photo file paths. I realize I may have confused the issue with that statement, it was out of context. But my purpose in doing so was to obviate the differences in file paths that PSE is expecting, and the file paths that I'm using. Perhaps that was a bad example.
I almost never use either the "My Documents" or the My Pictures" folders in Windows, nor do I allow PSE to use them. Storing data of any kind on the OS drive (C:/) is not in my repertoire of "stupid things I like to do, even if they're destined to end badly".
All of my computers have a minimum of 2 physical HDDs, not partitions. All video, music, photos, program installer files, etc. are stored on a discreet, separate, HDDs, (identified in "My Computer" as, (IE) " G: Volume")). The "C:/" drives are exclusively for Windows and installed programs.
That said, a typical file path to a group of photos in my computer would be, "My Computer" > "G:/ Volume" > "My Digital Photos" > "Airshows" > "McGuire AFB 2007" (In case you're wondering, I'm way too lazy to go through that each time, so I add desktop shortcuts to the extra HDDs and even the largest folders).
As you are well aware, that is completely different from the file path that PSE would choose by default. A file path for which I have a great deal of disdain. But, that is another complicated and contentious issue, which doesn't have a clear winner thus far.
Anyhoo, I think that PSE would "appear" more compatible (and probably is )with Windows 7 if it were allowed to follow it's own choices as to where to store the photo files. One supposes the folders that Windows 7 "creates" for earlier programs further aids (supposed) compatibility.
As I mentioned in one of my other somewhat long winded posts, I now have a viable option for importing photos, "find photos by searching", the manual drill down modus operandi. Works great!
I'm not expecting this installation of PSE to do any, "heavy lifting" with respect to editing, or a resting place for un-backed up photos . It's in a new machine I just built for the primary purpose of, extra backup, recording TV, and perhaps installing a Bluray drive. The motherboard has HDMI output, so it plugs into the TV directly, and the PSE slideshow function works perfectly. With a 40" TV, it's even better than a slide projector for boring relatives with vacation photos!
So, although this thread is still marked as "unanswered", I do have a workaround solution. There should be a check box indicating, "it won't ever be answered until Adobe issues a patch"! (Like that's going to happen).
Again Mr. Ellis, thank you very much for your interest in this issue. I might add that I have read your page on problems with PSE and it's obvious that you have applied a great deal of thought, effort, experience, and industry toward helping people deal with PSE more effectively.
As an afterthought I have several copies of PSE laying around, 2,3,5, & 7, (some in multiples) and I've never had a serious problem with any of them. So I'm actually astounded when I see the litany of issues that apparently manifest themselves. This is my first actual issue, and Windows 7 is pretty upfront about PSE 7 being an incompatible application.

Can't import Canon G12 RAW images into iPhoto 6.0.6

unable to import Canon G12 RAW images into iPhoto 6.0.6 (Mac OS-X (10.5.8) - any ideas?

You'll need to install the Digital Camera RAW Compatibility Update 3.5 - Search the Support/Downloads site for that.
It still may not work. Iphoto 6 is an elderly piece of software now and predates your camera by several years. If it doesn't work you'll need to update to iPhoto 09 or later.
Regards
TD

How can I import Canon GPS location from one picture in project to remaining pictures in project?

How can I import Canon imbeded GPS location from one picture in project to remaining pictures in project?

If you have several photos taken at the same location you can use the Lift&Stamp tool to copy the GPS data to the other images.
Seelct the image, press the "Lift" button, deselect all tags in the Lift&Stamp HUD but the GPS coordinates, then select all photos taken at the same place and and press the "Stamp" tool. (marked by the down arrow)
Alternately use the "Places View". You will see the photos with a GPS location marked by a pin. Drag the photos you want to assign to the same place simply to that pin on the map and they will be assigned to the same place.
Regards
Léonie

Trouble importing font

Hi. Having trouble importing a font -- universe to be specific. I brought it into Font Book and it's working in Pages. But when I select it in Final Cut, I get a bold, italicized text. It doesn't change -- it's bold and italicized -- no matter what style I choose (plain/bold/italic/bold-italic).
Any ideas on how to fix this?

6.0.6.
False alarm -- the font works fine in the video panel of the viewer. It's only slanted and bold in the control panel.
Thanks for the help.

Trouble importing Canon XF in CC

Similar Messages

Maybe you are looking for