Trouble Importing mp3 Files

Hello:
I've installed iLife 06 over a week ago, and played around a little with Garageband 3. By the way, I'm running Panther (10.3.9) on a Powerbook G4 laptop.
I do a radio show, and so I usually record a two-hour show. For the heck of it, I wanted to kick the tires, as it were, with importing one of the files as a track. And no matter if it's a one-hour file or a two-hour one, it fails to import the tracks properly. Even though I can see the orange track on the timeline, the actual sound wave is only partial. For a two-hour show that I attempt to import, for instance, it routinely cuts off the wave at 1:06:xx (that's an hour and six minutes plus).
I'm baffled, because these are mp3 files that I'm working with, usually at 128 kbps or 192. Any help to get this resolved would be appreciated....thanks!

http://www.thehangtime.com/gb/gbfaq2.html#recordlength
http://www.thehangtime.com/gb/gbfaq2.html#toofast

Similar Messages

  • I get an error when trying to import MP3 files in iTunes?

    When I try to import mp3 files into iTunes (version 6), I get an error message of:
    The file "song file name" can not be imported An unknown error has occurred (-50).
    I have already imported these files into iTnes on my old computer, but run into this problem with my new laptop. I downloaded a new version of iTunes just like I installed all my new programs on this new laptop.
    For some reason, I run into this problem when trying to import any mp3 files (as mentioned, even mp3 files that I successfully imported into iTunes previously).
    (I've tried a complete removal and re-install, but that didn't help)
    Anyone know why I'm getting this error message and how to correct things?
    Thanks in advance for any help !!!

    C:\DOCUME~1\Mark\LOCALS~1\Temp\WERe357.dir00\iTunes.exe.mdmp
    C:\DOCUME~1\Mark\LOCALS~1\Temp\WERe357.dir00\appcompat.txt
    those are the files that are sent as an error report... i dont know what the problem is! this is starting to get me mad! I need my music! some1 help plz.
    I cant load that one folder, what could be the problem? I've loaded another folder similar to this one but it was alot smaller and everything worked out fine, but for my big one its messing up.

  • Import MP3 files to N97

    I have tried to import MP3 files to N97 device. I am using Nokia Music. After I copy required MP3 file into Nokia Muisc I can right click and see an option "Tranfer to" menu option. But this is disabled. Can you let me know what is wrong.
    I am able to copy directly to mass stores device using file manager and I can play required files by browing to sepcif folder. Any how this is not a neat way of doing it. Appreciate any help on this.
    Bye
    Jinachandran
    Solved!
    Go to Solution.

    once you have transfered music to your mass memory using file manager go to the music player>options>refresh library. once finished you will find all your music through the player
    all those kudos you've got don't make you god

  • Trouble importing LOA files

    Hello,
    I've got 300+ laptops that require 2 new AC profiles added and an old profile removed. I've followed the AC profile deployment guide which is relatively straight forward, but when I try to silently import the LOA file using the qctray /importsilently command, nothing happens. The profiles do not appear in AC. However, I can import the LOA file manually using the profile import menu option but the imported profiles do not retain the encryption key. I've tried AC 4.41 and AC 4.52
    I called Lenovo support but the rep didn't know where to route my call so someone is supposed to call me back.
    Anyone seen this? Is a log file somewhere that can help?
    Harrison

    http://forums.lenovo.com/t5/ThinkVantage-Technologies/Trouble-importing-LOA-files-via-qctray/td-p/76...

  • I can't import MP3 files - why?

    I'm new to iTunes, and am wondering why I can't permanently import MP3 files that are currently on a DVD into my iTunes library. (Right now, iTunes will only recognize the songs when the DVD is in the computer). Is there any way that I can permanently move them into my iTunes library, so that I can then download the songs to my iPod?
    Thanks!

    Hi Chris,
    I'm sorry for all the questions, but when I previously tried to add the files from the DVD to iTunes library (using the File -> Add file (or Folder)command), it created new folders in my iTunes library for the files, but they were empty. So, when I tried to download everything from iTunes into my iPod, the iPod said that the songs "couldn't be found". That's why I was so upset --after spending two hours thinking that I was importing selected songs into my iTunes, I learned that I was really only creating empty folders for them...!

  • I Can't import MP3 files in iTunes?

    When I try to import mp3 files into iTunes (version 6), I get an error message of:
    The file "song file name" can not be imported An unknown error has occurred (-50).
    I have already imported these files into iTnes on my old computer, but run into this problem with my new laptop. I downloaded a new version of iTunes just like I installed all my new programs on this new laptop.
    For some reason, I run into this problem when trying to import any mp3 files (as mentioned, even mp3 files that I successfully imported into iTunes previously).
    (I've tried a complete removal and re-install, but that didn't help)
    Anyone know why I'm getting this error message and how to correct things?
    Thanks in advance for any help !!!

    1) find an MP3 file on your file system (in Windows Explorer)
    2) Right click on it to get contextual menu
    3) Select Properties
    4) on the General Tab the text "opens with" appears - in your case it'll be windows Media Player
    5) Click Change
    6) Select ITunes
    7) Select Always for this type checkbox
    8) Now try double clicking on an MP3 file
    9) Does it start playing in ITunes?
    10) Check Itunes settings: Edit>Preferences>Advanced
    11) Are the checkboxes Keep Itunes folder organized and Copy to Itunes foler when adding selected? If not - read the manual to understand what those two settings do

  • Im having trouble importing mov files into premiere pro on creative cloud, have installed quicktime

    Im having trouble importing mov files into premiere pro on creative cloud, original problem was no video and only audio when I imported mov file, so I have installed quicktime after reading that may solve the problem,but now an error message reads codec missing or unavailable, any help would be appreciated

    MOV is a wrapper... what is inside the wrapper?
    Codec & Format information, with 2 links inside to read
    -read both links in reply #1 http://forums.adobe.com/thread/1270588
    Report back with the codec details of your file, use the programs below... A screen shot works well to SHOW people what you are doing
    http://forums.adobe.com/thread/592070?tstart=30
    For PC http://mediainfo.sourceforge.net/en or http://www.headbands.com/gspot/

  • I can't import mp3 files into iTunes

    Just recently, I find that I can't drag/drop (or import) .mp3 files into iTunes (12.1.0.50).
    I did confirm that the files aren't locked.
    Any ideas?  Thanks!

    No mp3 files from any source, including iTunes itself, or just some particular batch of mp3s files from some unspecified source?  It isn't unusual for some encoders to produce mp3s that are not compliant with iTunes.  You can try using the application MP3 Scan+Repair (http://triq.net/mac/mp3-validator-mac-os-x) to fix them but sometimes you have to re-encode them.  Try playing with Quicktime Player instead and report if it will play the files.
    Oh, it also isn't unusual that files do not have labels built in.  They are adding to iTunes but not ending up where you expect them to be.

  • Flash CS5 will not import mp3 files

    With the latest Flash program and the latest Quicktime version, I still can not import mp3 files to my Flash.
    No reason is given, it only tells me it can't be done.
    elliejo

    that's usually an mp3 setting problem.  open your mp3 in audio editing software and resave.

  • Import mp3 file to imovie

    i cannot import mp3 files to imovie - i tried via itunes but the files do not show up and cannot be dragged. any suggestion? thank you

    I have the same problem and read your response and cannot make any sense of it.
    What is the "apps area of itunes"?
    How about this? For some unknown reason, Apple requires your audio clips to be in itunes first , which is ridiculous.
    And when you put them in, imovie won't recognize them. That is just bad design all the way around. Mine are in mp3 and something called m3a, and neither is recognized by this terribly designed program

  • Help! can't import mp3 files

    hello,everyone. I'm a new logic user and I met several problems when i first used logic 7.2.3.
    One problem is that i cannot import mp3 files, when i do so, the logic tell me 'Permission was denied, probably due to insufficient access rights.' Another problems is that everytime i pressed the record button, there will always be 2 seconds to wait before the logic starting record, though the cursor is moving. Sometimes it is useful but sometimes i don't need time to wait. What can i do to cancel the wait time?
    well, i am a foreigner and english is not my mother tongue, so maybe i cannot express myself clearly. Advanced thanks for you.

    bluecollin wrote:
    hello,everyone. I'm a new logic user and I met several problems when i first used logic 7.2.3.
    One problem is that i cannot import mp3 files, when i do so, the logic tell me 'Permission was denied, probably due to insufficient access rights.'
    <SNIP>
    Hi,
    The reason your mp3 cannot be imported is the following:
    The mp3 is locked, and does not allow the operation to happen.
    Try this:
    1. COPY the mp3 file onto your hard drive.
    2. in your finder, look up your mp3. press "apple+i" for the file info to be displayed.
    3. look at the bottom of the info pane that pops up, and CHANGE the permissions for everyone to "read+write"
    4. CLOSE the info pane, and then try to import the mp3 inot Logic. It should now import normally.
    Cheers

  • BUG: Unable to Import MP3 Files in Flash CS6

    I am unable to import mp3 files of any kind in Flash CS6. Tried import to stage, import to library, Drag and Drop... no dice. Receiving a generic error message. Tried closing out and restarting,etc. - still not working.
    Anyone else having this issue?

    Yep that worked!
    The "update" in the library would not update the content but the drag and drop worked fine.
    Note: The path in the update dialog shows a relative path and after the drag and drop it shows an absolute path to the file
    I also had an issue with the audio being changed from stream to event.

  • FAQ: Unable to import MP3 files in Flash Professional CS6

    If you are unable to import mp3 files in Flash Professional CS6, ensure that you update QuickTime(7.7.1) and iTune(10.5.3.3) versions. This is necessary to import .mp3 files of bitrates higher than 192kbps.

    Yep that worked!
    The "update" in the library would not update the content but the drag and drop worked fine.
    Note: The path in the update dialog shows a relative path and after the drag and drop it shows an absolute path to the file
    I also had an issue with the audio being changed from stream to event.

  • Problems importing .mp3 files to itunes

    I'm having problems importing .mp3 files to itunes, it's importing the song name tage with "artist - song title" when it should just be the song title?

    Chad, 
    Glad to hear that Steve's script was helpful.
    As to the bug, I don't know.  The problem you report is not common.  Usually when iTunes displays artist-title in the Name field, it is either an untagged MP3 or a WAV file, but in those cases it does not correct itself when you give it a kick.  Between that and the non-refresh problem you report, I think there is something else going on besides a tagging issue.  At your convenience, you may want to reinstall the newest iTunes, and see if it helps.
    Anyway, enjoy the music!
    Ed

  • Imported mp3 files end up as "Unknown" tracks

    I have a folder of mp3 files - all files have different names. When I import into iTunes all the files are given the track name "Unknown".
    Ideally I'd like to import the folder and have the folder title as the Album Title and the different mp3 tracks given the correct track names without having to re-name them in iTunes.
    How - without too much trouble (there's about 40 tracks in each folder).
    JL

    Unfortunately, you probably won't be able to retrieve the titles directly. Mp3 files have the capability to encode information such as song title, album title, artist, etc. But if that information isn't already encoded in the file, then there's nothing for iTunes to read. Unfortunately, it won't read the file titles as song titles. So, unless anyone has any other idea, you will have to type in the song info for each file.

Maybe you are looking for

  • Analysis Process Designer (APD) and EMail

    Hi, Following due to data discrepancy in PO value,We developed a re conciliation report based on  direct cube,The re conciliation report displays PO No,Po Value in BW and PO Value from ECC and a Difference column. My requirement is to develop a APD w

  • Applescript for creating job folders

    having trouble with an applescript. I'm trying to create an applescript that will create a job folder for me with job number and job name in which I can include folders and subfolders. I found this script by searching google and it's pretty much what

  • Is there a terminal command that will close quicktime player once a video is finished?

    I'm running a python program that uses subprocess.call(['open', '-a', "Quicktime Player", filename]) to open a video and defaults write com.apple.QuickTimePlayerX MGPlayMovieOnOpen 1 starts it automatically. I'm wondering if there's a terminal way or

  • SOAP - RFC possible with Direct Connection?

    On our PI 7.1 system we have a RFC which we want to expose as a webservice with all the standard monitoring SAP PI provides. On PI 7.0 is used to create a configuration scenario in Integration Builder and generate a WSDL. I have read the document 'Co

  • Propagating user identities to the IS and to receiver systems

    Hi, According to "SAP Security Guide XI", XI generally uses anonymous technical users: "The user authenticating itself for the Adapter Engine or the Integration Server is a technical user defined in the sender system." and "This implies that the iden