Trouble importing ORF files from E-PL5 into LR5.3

Hello, A small percentage of the RAW files from my Olympus E-PL5 look "blurry" or "out of focus" when viewed using LR5.3 (Windows 8.1). However, most of the RAW files from this camera look fine when viewed in LR (even pictures from the same shooting session). When I view the "blurry" files using Olympus Viewer 2, they no longer look out of focus. I can then edit these files using viewer 2 with no difficulties. Does anyone have an idea as to what I am doing wrong? Thanks in advance for any suggestions.

I mean ORF files. Found out after some reading it's due to the version PS10. Converted files to .DNG and then it can be imported. Thanks

Similar Messages

Cant import raw files from sony rx1003 into iPhoto

Cant import raw files from sony rx1003 into iPhoto. with rx1002 no problem! any suggestions?

Every model of a manufacture's camera have a different RAW format and, therefore, you'll have to wait until Apple receives the necessary information from Sony so they can create a RAW Compatibility Updater that includes that model.
In the meantime you can try the Adobe RAW converter with might support that camera model to create a dmg file that iPhoto will recognize and begging shooting the highest resolution jpegs until the updater is released.

Can't import .mov files from my camera into iPhoto

I am not able to import .mov files from my kodak camera into iPhoto. It says the file is not readable. Also, if there are any photos after the video file, those are said to be unreadable too, even if I select just the photots for import. I tried to import the .mov file with image capture as well, and that gave me an import error also. I can view the file fine on my camera and iPhoto and image capture both will give me the properties of the video file but will not import. I have imported .miv files before with no trouble. I have tried several different files with the same results. Even tried different memory cards. Not sure how to get this file on my computer or why there is a problem all of the sudden.
Thanks.

Welcome to Apple Discussions,
What model of Kodak is it?
There is a discussion thread on this topic: http://discussions.apple.com/thread.jspa?messageID=11942367&#11942367
Try using a media card reader (sometimes built into printers) to see if that allows the import. Others seem to report having luck by importing the movies off the card using a different computer, deleting them, and then importing the pictures.
Hope that helps.

Unable to import Raw files from 5D Mk3 into LR3 [was:.CR2 files]

I am having trouble importing .CR2 files into lightroom 3. Any Suggestions

http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html
The 5D Mk3 was first supported in Lightroom 4.1. Lightroom 3 will not be upgraded to read files from the 5D Mk3.
You can either upgrade to Lightroom 5 or use the free Adobe DNG converter to convert the Raw .CR2 files to DNGs then edit the DNGs in Lightroom 3.
http://www.adobe.com/products/photoshop/extend.displayTab2.html

Import Raw files from Nikon D7000 into Lightroom 3

If I understand correctly I must upgrade to Lightroom 4.3 or get a converter in order to import my Raw files from Nikon D7000 into Lightroom?
Not sure if I understand it correct? Which is the best way?

I use LR 3.6 with the latest updates for camera raw for this version, I believe it's 6.7, and my D7000 and its NEF's were correct handled.
Did nothing else as install the program, update every time there was an update and in September when I bought the D7000 LR worked fine with his NEF's. Before I had a D40x which was als correctly handled.

Unable to import movie files from iphoto '08 into imovie HD

I have recently bought a 2008 macbook (2.2 GHz) and have recently downloaded imovie HD in addition to owning iLife '08 due to its extra capabilities. I have found that I am unable to import any of my movie files from my iphoto library folder as it seems to need to open the actual iphoto application before the files can be accessed. In addition, when not using any specific program it would be nice to be able to access my photo/video files within the iphoto folder without iphoto automatically opening as the default viewer.
Any ideas??!! Thanks.

ahostmadsen wrote:
.. and I import AVI video clips directly without converting to .dv, without problems.
lucky you.. .avi is just a container, no 'format'/codec .. I can show you dozends of .avis, which will NOT import into iMHD6, due to being playback-codecs, not convertable by the underlying Quicktime engine into separte, editable audio+video streams ..
.. If you convert to .dv, the size just blows up.
dv is 13GB/h and a codec meant for editing; e.g. it stores every frame (video=30 frams/sec) of a recording, as mpegs usually doesn't do so.. = your Mac has to estimate content, when converting and 'recovering' the content = lossy process.
iMHD6 is a dv-editor; the mpeg4 feature is only a toy, to spice up iSight recordings.. for sure, the QTengine can convert a lot, but too much conversion (from one lossy codec, e.g. divx, into another, e.g. mp4) means a (dramatic) loss of pic quality..
my 5€ cents ..

Cannot import ORF-files from Olympus E-520

Hi,
One of my friends has this problem:
When he plugs in his new Olympus E-520 to iPhoto '08, and clicks 'import', this output comes:
http://upit.jtw.dk/dl/q29/
Sorry about it being in danish, but basicly what it says is that the files are unreadable, and cannot be imported for that reason. This seems strange to me, as iPhoto should support ORF-files.
Also I have not been able to find anyone with a similar problem on the internet.
Why Apple, oh why ?..

Is your friend shooting RAW format? If so then the camera is not supported. Mac OS X 10.5: Digital camera RAW formats supported.
Have him try using Image Capture or a card reader to get the files to the desktop and see if they will import from there.
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger or later), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 6 and 7 libraries and Tiger and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.≤br>
Note: There now an Automator backup application for iPhoto 5 that will work with Tiger or Leopard.

Cannot import .mov files (from JVC HM100) into After Effects CS6

Hi,
I am trying to import .mov files into After Effects CS6. Unfortunately, when I try to import the .mov files, AE tells me "After Effects error: 210_0001_01.mov cannot be imported -- this '.mov' file is damaged or unsupported." The file works in Premiere CS6. I have the latest Quicktime, and even with Quicktime 7 Pro installed, I got that same result. I would appreciate any advice on this problem.
Thank you.

RobertHorn2012 wrote:
I'm going to set up a new sequence with just the clip I'm using after effects on. I'm going to import that sequence into AE.
Your footage is currently a long-gop codec, which may be giving Mocha fits. So instead of Dynamic Link, you may want to simply export the clip in question from Premiere using a lossless codec. Remember to leave handles on the footage.
To get back to Premiere you would then render in a lossless codec. It's not very handy, but it will get the job done.
Give it a try and see what happens.

How can i import my files from an Acer into my new iMac - easiest idiot proof solution pls

i bought an iMac, and would like to migrate all data from my old Acer aspire one over to the mac
i tried thru wireless ------ too dumb for it - or to bad step by step guides to do it
same for connecting the two by ethernet....
can someone guide a dummy thru this pls?

Do you have a USB flash drive or an external hard drive, if so then plug it in to your USB port on your Acer and copy your my documents folder to to the drive. After ejecting the drive insert it into the Mac and copy the files into your home folder. I would copy folder to folder from drive, for example; your documents folder files from Acer to Mac documents folder and so forth.

Trouble importing .pst file from outlook 2010 to office for mac 2011

Hi !!.. have a probem.. maybe u could help I would be so grateful...
At work I am using windows 7 microsoft office 2010 fully updated,,
I export a folder of my sent e mails to the desktop,, then copy to flash drive...
I take the flashdrive and put it in my mac..copy pst (and subfolders) to mac desktop..
then I open office for mac 2011(fully updated) and import the .pst file from the desk top..
all folders show up and open but not e-mail content!!
how can I get my e mails from work to my mac.. why am I not seeing the e-mails..the file that copies over is around 33 mb ( 188 emails) so I know there is something there..I am only importing my e-mails.. no other info) I even create a sub folder and move
everything to the subfolder before I copy it..
can you help me??
thansk so much !!

Hi there,
Can you import the PST file and find the sent items in another Outlook for Windows? If the issue only occurs in Outlook for MAC, I'd suggest you pose the question in the forums below:
Office for MAC
http://www.microsoft.com/mac/support
Support for Microsoft Office for Mac 2011 and 2008
http://support.microsoft.com/gp/cp_macoffice2008_master
How to obtain support for Microsoft Outlook for Mac 2011 connectivity problems with Exchange Server
http://support.microsoft.com/kb/2353366
Your understanding would be appreciated.
Fiona Liao
TechNet Community Support

Import adjusted photos from camera raw into Lr5

I like using Bridge to import my photos but also like to use LR5. After I organize and edit in camera raw I want to import (ADD) the adjusted photos into LR5. Problem is the adjustments dont import into LR. The original raw DNG is imported without the fixing that I did. Please help.

In the Camera Raw preferences, make sure you have Save image settings in: set to Sidecar ".xmp" files set. If you don't, then the settings are only saved in the Camera Raw database which Lightroom can't read.

Can't import aac files from external source into itunes

Hi
I'm new to mac and am trying to import all the music currently on my nokia phone memory card into itunes on my mac.
It has no problems importing the songs which are m4a files, but it absolutely will not import the .aac files. bizarre as they were created from original cds using itunes on my old pc.
can anyone help? can i alter the import settings to allow this or should i go back to the original cd's again?
thanks

Hey Kevin,
thanks for your reply. I fixed the problem.
I need to download these 3 programs from RED:
RED APPLE WORKFLOW INSTALLER
RED ROCKET-X™ INSTALLER
REDCINE-X PRO
After installing and restarting everything works fine - no other problems with importing the R3D files.
Donwload Link: Downloads - RED Digital Cinema
Hope it also works for the others,
best regards,
Marc

Importing AVI files from Adobe Premiere into Final Cut Pro 5

I am editing a video for someone who captured the footage on a PC with Adobe Premiere, and he gave me a hard drive with the AVI files. Is there any way I can import them or convert them to import in Final Cut Pro 5?
If not, would settings should he use when he exports the captured footage so that I can use it?

Hello there,
you can use QuickTime Player to convert the files. You need QuickTime Pro for export functionality, though.
Step by step as follows:
1. Open the AVI file in QT Player, select "File > Export".
2. In the "Export:" pulldown select "Movie to QuickTime Movie".
3. Select "Default settings" in the "Use:" pulldown.
4. Click "Options" right to the first pulldown menu.
5. Click "Settings" in the "Video" pane.
6. Set Compression type to "DV/DVCPRO - NTSC".
7. Set other options (interlaced/progressive) as needed.
8. Click "OK".
9. Set audio options in the "Sound" pane using the "Settings" button. (I don't have an AVI w/ sound here, so please see FCPs DV-NTSC Easy setup for approriate audio settings).
10. Click "OK".
11. Optionally: name the file.
12. Click "Save".
For the remaining files, use the "Most recent settings" option in the "Use:" pulldown of the export dialog.
Unfortunately, while QT Player can export multiple files simultaneously, it has no batch capabilities, so you have to open and export each file by hand.
Also, I'm not sure if QuickTime recompresses the files or just changes the container (even if the codec is the same).
Other than that I always recommend Flip4Mac's Episode for this kinda work. This app even has a conversion preset for this. Also Episode allows for changing the container format (AVI -> QuickTime) without recompressing the frames.
Hop this helps, Oliver

Lightroom 5 has stopped importing ORF files from my Olympus E5 using a card reader. I have version 5.7.1 with Camera Raw 8.7.!

I was having no problem with the imports until the last update. LR, PS, and CR are all up to date.

There are a gazillion threads on this. Seems like predominantly a Mac issue.
You need to change the permissions on the destination directory to Read and Write.

I have used lightroom for years on my PC and just installed it on my new iMac. I cannot import NEF files from iPhoto or from my Lacie hard drive into Lightroom. I have tried Lightroom Help but still cannot import NEF files. What am I doing wrong?

I have always used Lightroom with a PC and now have installed Lightroom 3.6 on my new iMac. I cannot import raw (NEF) files from iPhoto (or from my Lacie drive for that matter into Lightroom. I have tried Lightroom Help to no avail. How do I import NEF files from the iMac into Lightroom?

If they are the same nef files that you were importing into your PC, see if the reason is an error message like the thread above this one. Permissions issue.

Trouble importing ORF files from E-PL5 into LR5.3

Similar Messages

Maybe you are looking for