Trouble in connecting with windows xp client

Hi I am using windows 2008 r2 enterprise server. Actually I have downgraded 2012 licence to 2008.
I have configured it for PEAP-MSCHAPV2 using NPS and active directory. But windows xp wireless client is unable to connect with PEAP or TLS.
I got the log as "unable to process the eap type".
Is there any issue with the certificates or configuration?
Please assist me about the configuration of windows 2008 r2 enterprise server for TLS and PEAP-MSCHAPv2 and configuration of windows xp wireless client so that the connection is successful.
Assist me on how to configure certificates in server and client side.
Thank u in advance
Goutham M S

Hi,
Have you installed the certificate on the client computer? If you designate a certificate that is not installed on client computers, authentication will fail. For more detailed information about EAP, you can view the link blow.
Extensible Authentication Protocol (EAP) Settings for Network Access
http://technet.microsoft.com/en-us/library/hh945104.aspx
Hope this helps.
Steven Lee
TechNet Community Support

Similar Messages

Can't connect with Windows Jabber client

Dual environment with Xserve authenticating to Active Directory domain controller. iChat is setup and is working for Mac users using Adium and iChat. However I cannot get any Jabber clients for Windows to authenticate. Both Pidgin and Psi error - "Authentication failed - no mechanism available".
All accounts are Active Directory accounts (Mac & Windows).

Hello again.
Try this. Stop the iChat Server. Using a text editor edit the file /etc/jabberd/c2s.xml Look for the section that talks about <mechanisms> Disable ( comment out thus <!-- and --!> ) all apart from <cram-md5/> for and <digest-md5/> and restart iChat server again.
As you gathered - forward and reverse DNS's have to be correct.
Tim

ORA-03135 connecting with Windows 7 via VPN

Can you please help me.
I am unable to connect with Windows 7 clients (x32 also x64) to a database 10.2.0.5 running on a Windows 2008 R2 x64 Server
Oracle Client Version: 10.2.0.3
always raises an ORA-03135 error!!!
But with a Windows XP Clients (same Oracle Client Settings) its working without problems. No connections problems!
We use a SonicWall Firewall where all Traffic (SQLNET,..) is allowed for testing!
CLIENT: SQL.NET ora
SQLNET.AUTHENTICATION_SERVICES= (NONE)
NAMES.DIRECTORY_PATH= (TNSNAMES)
SERVER: SQL.NET ora
SQLNET.AUTHENTICATION_SERVICES= (NONE)
NAMES.DIRECTORY_PATH= (TNSNAMES)
Some Trace Infos:
Oracle Client:
(1256) [25-NOV-2010 11:23:38:997] ntt2err: entry
(1256) [25-NOV-2010 11:23:38:997] ntt2err: soc 1992 error - operation=5, ntresnt[0]=517, ntresnt[1]=54, ntresnt[2]=0
(1256) [25-NOV-2010 11:23:38:997] ntt2err: exit
(1256) [25-NOV-2010 11:23:38:997] nttrd: exit
(1256) [25-NOV-2010 11:23:38:997] nsprecv: error exit
(1256) [25-NOV-2010 11:23:38:997] nserror: entry
(1256) [25-NOV-2010 11:23:38:997] nserror: nsres: id=0, op=68, ns=12547, ns2=12560; nt[0]=517, nt[1]=54, nt[2]=0; ora[0]=0, ora[1]=0, ora[2]=0
(1256) [25-NOV-2010 11:23:38:997] nsrdr: error exit
(1256) [25-NOV-2010 11:23:38:997] snsbitts_ts: entry
(1256) [25-NOV-2010 11:23:38:997] snsbitts_ts: acquired the bit
(1256) [25-NOV-2010 11:23:38:997] snsbitts_ts: normal exit
(1256) [25-NOV-2010 11:23:38:998] snsbitcl_ts: entry
(1256) [25-NOV-2010 11:23:38:998] snsbitcl_ts: normal exit
(1256) [25-NOV-2010 11:23:38:998] snsbitts_ts: entry
(1256) [25-NOV-2010 11:23:38:998] snsbitts_ts: acquired the bit
(1256) [25-NOV-2010 11:23:38:998] snsbitts_ts: normal exit
(1256) [25-NOV-2010 11:23:38:998] nsdo: nsctxrnk=0
(1256) [25-NOV-2010 11:23:38:998] snsbitcl_ts: entry
(1256) [25-NOV-2010 11:23:38:998] snsbitcl_ts: normal exit
(1256) [25-NOV-2010 11:23:38:998] nsdo: error exit
(1256) [25-NOV-2010 11:23:38:998] nioqrc: wanted 1 got 0, type 0
(1256) [25-NOV-2010 11:23:38:998] nioqper: error from nioqrc
(1256) [25-NOV-2010 11:23:38:998] nioqper: ns main err code: 12547
(1256) [25-NOV-2010 11:23:38:998] nioqper: ns (2) err code: 12560
(1256) [25-NOV-2010 11:23:38:998] nioqper: nt main err code: 517
(1256) [25-NOV-2010 11:23:38:998] nioqper: nt (2) err code: 54
(1256) [25-NOV-2010 11:23:38:998] nioqper: nt OS err code: 0
(1256) [25-NOV-2010 11:23:38:998] nioqer: entry
(1256) [25-NOV-2010 11:23:38:998] nioqer: incoming err = 12151
(1256) [25-NOV-2010 11:23:38:998] nioqce: entry
(1256) [25-NOV-2010 11:23:38:998] nioqce: exit
(1256) [25-NOV-2010 11:23:38:998] nioqer: returning err = 3135
(1256) [25-NOV-2010 11:23:38:998] nioqer: exit
(1256) [25-NOV-2010 11:23:38:998] nioqrc: exit
(1256) [25-NOV-2010 11:23:38:998] nioqds: entry
(1256) [25-NOV-2010 11:23:38:998] nioqds: disconnecting...
(1256) [25-NOV-2010 11:23:38:999] nsclose: entry
Server Traces:
nttrd: socket 4172 had bytes read=0
nttrd: exit
nsprecv: error exit
nserror: entry
nserror: nsres: id=0, op=68, ns=12535, ns2=12560; nt[0]=505, nt[1]=60, nt[2]=0; ora[0]=0, ora[1]=0, ora[2]=0
nsrdr: error exit
nsdo: nsctxrnk=0
nsdo: error exit
nioqrc: wanted 1 got 0, type 0
nioqper: error from nioqrc
nioqper: ns main err code: 12535
nioqper: ns (2) err code: 12560
nioqper: nt main err code: 505
nioqper: nt (2) err code: 60
nioqper: nt OS err code: 0
nioqer: entry
nioqer: incoming err = 12151
Server SQLnet.LOG
Fatal NI connect error 12170.
VERSION INFORMATION:
     TNS for 64-bit Windows: Version 10.2.0.5.0 - Production
     Oracle Bequeath NT Protocol Adapter for 64-bit Windows: Version 10.2.0.5.0 - Production
     Windows NT TCP/IP NT Protocol Adapter for 64-bit Windows: Version 10.2.0.5.0 - Production
Tns error struct:
ns main err code: 12535
TNS-12535: TNS:operation timed out
ns secondary err code: 12560
nt main err code: 505
TNS-00505: Operation timed out
nt secondary err code: 60
nt OS err code: 0
Thx

always raises an ORA-03135 error!!!
Server SQLnet.LOG
Fatal NI connect error 12170.
VERSION INFORMATION:
     TNS for 64-bit Windows: Version 10.2.0.5.0 - Production
     Oracle Bequeath NT Protocol Adapter for 64-bit Windows: Version 10.2.0.5.0 - Production
     Windows NT TCP/IP NT Protocol Adapter for 64-bit Windows: Version 10.2.0.5.0 - Production
Tns error struct:
ns main err code: 12535
TNS-12535: TNS:operation timed out
ns secondary err code: 12560
nt main err code: 505
TNS-00505: Operation timed out
nt secondary err code: 60
nt OS err code: 0
ThxThis is network related problem,may be network very slow.When error occur then execute tnsping <netservicename> command and see that happen.

How to run import from Unix Oracle 8.0.5 database with Windows Oracle client?

How to run import from Unix Oracle 8.0.5 database via network with Windows Oracle client? Is it possible? When I try to do it Oracle client just hangs... If not which ones are compatible Aix or Solaris to Unix or it must be a Unix client to connect to Unix Oracle database. Thank's for any help.

Hi,
In our project we are using this type. Since in this project server in UNIX(DEC) and client is running on windows. We have created a listener which always listen requests from client and doing the according to the request.
Step1. create a request table, where u are inserting ur request.
step2. create PRO*C proram, which is listening request on the table. If there is any request, call the imp (executable). This is happening on server side.
Benifit. U can make a request from cleint and ftp the file client sit.
Are u interested in more details and code, pls send a mail to me
---- Boby Jose Thekkanath
[email protected]
Dharma Computers(p) Ltd. Bangalore.
null

JDBC Thin Connections with SSL and client certificates

Hi ,
we are going have a look at JDBC Thin Connections with SSL and client certificates.
I have two questions:
1. Is it possible to use SSL connections from JDBC Thin Driver and which release of the driver introduced it
2. Is it possible to use client certificates with JDBC Thin Driver and which release of the driver introduced it
Thanks for your help
regards
Markus Reichert

I could not reproduce the error after appending the SSL certificate to the certdb.txt file available under $Jinitiator_Home/lib/security folder.
Steps to add the SSL Certificate:
1. Run the form with the https mode in the IE Browser.
2. Security Alert is raised.
3. Click on the View Certificate button.
4. In the Certificate Window, click on the Details tab.
5. Click on the Copy to File button to copy the certificate.
6. Copy the certificate and append to the certdb.txt file.

Roaming Profile Not Syncing with Windows XP Clients

I'm running an XServe with 10.4.8 as a PDC, with some XP systems authenticating to it. I don't have problems logging in or viewing the user's profile, but any files saved to the desktop are no longer accessible at the next login. If I create a file and store it in the user's profile desktop directory on the file server, the file does appear on the desktop the next time the user logs in. The profiles are stored on a Linux server running SMB, as are the home directories, which work fine. I'm not sure where to be looking to solve this.

Beginning with Windows XP SP2, Microsoft has disabled Basic authentication by default in an effort to increase security. Unfortunately their Digest authentication is broken so you can't connect using that authentication scheme either.
The following link shows you how to edit the registry to add a key in Windows XP to enable Basic authentication which will allow you to connect a Windows XP client to a Mac OS X Server using WebDAV.
http://www.microsoft.com/technet/prodtechnol/winxppro/maintain/sp2netwk.mspx#EIN AE
From that page:
You can enable BasicAuth by adding the following registry key and setting it to a non-zero value:
HKEYLOCALMACHINE\SYSTEM
\CurrentControlSet\Services \WebClient\Parameters\UseBasicAuth (DWORD)
To restore the default behaviour:
If you delete the registry key or set it to 0, the behavior reverts to the default, or disabling the use of BasicAuth.

My ipod nano (2nd generation) will cont connect with windows or itunes, windows says it has had reported errors??? any help? havnt used ipod in over a week and now it wont work with my computer

my ipod nano (2nd generation) wont connect with windows or itunes, i used it last week (charged it through USB) then this week when i connect it (once again through USB) it wont work, it says "windows has stopped this device because it has reported problems" any help? ive made sure my itunes is up to date, done a reboot on my computer and ipod and still nothing..help please

This could either be a conflict with the iPod's docking port, the iPod's USB sync cable, or even the USB port you are plugging the iPod into on your PC. So the first thing I would try and do is plug the iPod into a different USB port on your PC. Make sure it's a high powered USB 2.0 port as they provide a higher power throughput than older USB ports or even the ones that are sometimes available on the front of the tower.
It might help to disconnected all other USB devices from the PC (minus the keyboard and mouse) and reboot the PC. Then reconnect the iPod once again.
If still no luck, swap out the cable with another known working cable to rule out the possibility of a damaged or faulty cable.
Lastly, plug the iPod into another PC to see if it's recognized there. If the same error appears on another machine, it's likely a hardware issue with the Nano meaning you'll want to have it serviced or replaced.
B-rock

TS1369 why doesnt my 5th gen ipod nano not connect with windows 8?

why doesnt my 5th gen ipod nano not connect with windows 8?

Doublechecking. Have you also tried a complete uninstall of both iTunes and all the other related software components and then a reinstall? If not, try the instructions from the following document:
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8

How to make SAP B1 connection with Windows Sharepoint Service 3.0

how to make SAP B1 connection with Windows Sharepoint Service 3.0 through asp.net web part code.. I get the security error when i run that web part......
public bool ConnectToCompany()
            oCompany = new SAPbobsCOM.Company();
            oCompany.Server = "192.168.1.58";
            oCompany.DbServerType = SAPbobsCOM.BoDataServerTypes.dst_MSSQL2005;
            oCompany.CompanyDB = "SBODemoUS";
            oCompany.DbUserName = "sa";
            oCompany.DbPassword = "abc";
            //oCompany.UseTrusted = true;
            oCompany.UserName = "manager";
            oCompany.Password = "manager";
            oCompany.language = SAPbobsCOM.BoSuppLangs.ln_English;
            oCompany.LicenseServer = "192.168.1.58:30000";
            int i = oCompany.Connect();
            if (i != 0)
                return false;
            return true;
protected override void RenderContents(HtmlTextWriter writer)
            if (conn.ConnectToCompany() == true)
                writer.Write("Hello" + this.Context.User.Identity.Name);
Edited by: bikalg on Nov 28, 2010 9:43 AM

Hi.......
Welcome to SAP Business One Forum.....
Unfortunately this is the wrong forum you posted here.
I would suggest you post it in SDK or System Administration Forum and definitely you get the solution and close this thread from here......
Regards,
Rahul

ISight - connects with windows users no problem?

I'd like to buy this webcam, but I heard it has problems connecting with windows users. Will I be able to talk to people on it through AIM? Thats what I'd like, if not, I probably wont get it. Anyone have any personal experience or have any answers or helpful tips - I'd appreciate anything - thanks.

It is not the iSight itself that gives you the impression that connecting with Micros~1 Windows users causes problems ... it is the availability of (cross platform) applications that makes connecting a bit more cumbersome.
I have PowerMac G5 with iSight and I connect with my Micros~1 Windows platform family equiped with and without USB webcam.
The challenge will be to find messaging / VoiP applications with bearable audio quality and reasonable video performance.
I started with Skype for Voice and Yahoo! messenger for bad video ( 1-2 fps and video size 320 x 240).
Skype has a video plugin (only for Windows)
Yahoo! Messenger does not have voice yet (2.5.3)
MSN is badmouthing because of the "M"
I have used iChat with another Apple believer ... and the quality of Voice and Video is unparralled.
The best two alternatives I found are:
a) AIM 5.9
b) Trillian (www.trillian.cc)
Both use a free AIM screen name.
AIM works fine, see also EZJim pages.
TrillianPro 3.1 reuses AIM screen names ... and ... it has both good audio and zoom-to-full-screen-video size with fps rates filling your bandwidth.
The only negative on Trillian so far, the "handshake" for connecting two people takes some time.
TrillianBase is free but has no Video capabilities. The Pro version is 25$.
Regards Coen
ps. if you want to test your setup use my AIM screenname: coenjeukens

X201 thinkpad won't connect with windows updates

hello,
my 6-month-old lenovo thinkpad x201 will not connect with windows updates via firefox 3.6.13 or internet explorer 7.
Machine model # CTO; Machine type # 3249 Windows XP Pro, Service Pack 3 .
i would appreciate assistance.
thanks.

how about updating to internet explorer 8?
or firefox 4?
getting microsoft updates will probably work better with internet explorer 8 though?
T430u, x301, x200T, x61T, x61, x32, x41T, x40, U160, ThinkPad Tablet 1838-22R, Z500 touch, Yoga Tab 2 Windows 8.1, Yoga Tablet 3 Pro
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
If someone helped you today, pay it forward. Help Someone Else!
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

HT204204 Having trouble to connect with bluetooth

Why i having trouble to connect with bluetooth woth other smartphone? I have already try to connect with bluetooth beetwen my iphone 4 with iphone 6 ? While my iphone 4 have already upgrade to ios 8

never mind. I fixed it. After uninstalling and then reinstalling iTunes all start to work. Thanks anyways

Ipad connecting with vmware view client v5.1. "any way to disable or hide radial virtual keyboard mouse interface as using blue tooth external keyboard"

Issue - ipad connecting with vmware view client v5.1. "any way to disable or hide the vmware view's radial virtual keyboard mouse interface" either in vmware view client settings, hidden cmds, or ipad system settings.
My client is using an external blue tooth ipad metal cover type keyboard and does not wish to have the radial keyboard / mouse visable or floating on desktop when connecting to vm with iPad using vmware view client v5.1.
i was unable to locate any settings or related toggle key/function combo keystrokes under iPad settings under vmware view client, to affect viewability of the radial keyboard/mouse. And can you kill it from service/process on vm instead of ipad? then dont allow service to restart at startup? What is the name of services that enable the radial virtual keyboard mouse - function to work?
Thanks for any and all feedback-
stratman1

I'm having a very similar issue. Sometimes, when I boot and type in startx (I'm not even a GNOME user--I use dwm and no graphical login manager), I just get a black screen. No mouse cursor, so I think X doesn't even load. It only started with the xserver 1.6 update and the update to that hasn't changed anything. What I've been doing is just rebooting until it loads normally (takes one to three times). Is anyone else having this problem?

Trouble Connecting with Windows Partition

Hi all,
I'm having trouble figuring out how to connect to my windows partition on my MacBook from my Desktop. I've obviously set things up incorrectly, but I can't seem to find the proper information to do it right.
On my Macbook, I have two partitions, one for OS 10.5, one for Windows XP. When I go to the NETWORK pane, it shows "Library," Mac001B631E2161," "MacBook," and "Servers." I can connect to the Macbook just fine. When I try to connect with "Mac...." it gives me a SMB/CIFS File System Authentication" dialog box, asking to enter the workgroup or domain name and my user name and password. I enter in "workgroup" and my user name and password, and it tells me it "could not be opened, because the original item cannot be found." And if I try to Delete Alias," it says the operation cannot be completed because I don't have sufficient privileges.
Any advice appreciated.
Thanks,
Mark

Hi,
Have you installed the certificate on the client computer? If you designate a certificate that is not installed on client computers, authentication will fail. For more detailed information about EAP, you can view the link blow.
Extensible Authentication Protocol (EAP) Settings for Network Access
http://technet.microsoft.com/en-us/library/hh945104.aspx
Hope this helps.
Steven Lee
TechNet Community Support

Windows 8.1 DPI scaling does not work with Windows 7 client ?

I have a Surface Pro with Windows 8.1 and a PC with Win7 SP1 both fully updated including optional updates (RDP8.1 client for Win7, verified in about box).
Still, when I connect to my Surface from my PC everything is enlarged.
My PC has two monitors: primary 1920x1080 and secondary 1680x1050. I've tried opening connection on each one of them as well as on both (multi monitor). I've also attempted to use windowed mode with lower resolutions.
Surface is set to default DPI settings (slider moved to Larger and "Let me choose one scaling" is unchecked). Also, when I'm connected via RDP I cannot move the slider ("Some display settings can't be changed from a remote session") though
I can click "Let me choose..." but that requires a sign-out. Another oddity is that my remote desktop client does not have a "Smart sizing" window menu item.

Hi,
When you are within a session you should be able to check the option Let me choose one scaling level for all displays, change the scaling, sign out, then when you reconnect it will have the new dpi setting applied. This is the expected method for a
Windows 7 client.
-TP

Trouble in connecting with windows xp client

Similar Messages

Maybe you are looking for