Trouble in installation of ABAP netweaver...
Hi friends...
I want to know few information regarding the Netweaver Installation...
I know SAP 4.6c installation and have installed more than 10...I learned this on my own with out any training..
But when it come to Netweaver, it quite different..
My Question is...
What software we need apart from Netweaver 7.01 ABAP, GUI.
do we need any KERNAL software, Oracle AND SAP DATA BASE... just like SAP 4.6 or we can install with NW 7.01 and GUI.
I know Pre and post configuration, just neet above info.
Thanks.
Regards
Neil.
Hello, for "trial" installation-->https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/80fd9a0a-e306-2a10-c896-b84c77c13ed2
you only need to use downloaded files, the installation guides are in in this files to.
Good blogs for you--> (it's about 7.0 (not 7.01) but i'm think steps are the same). New Blog Series: ABAP Trial Version for Newbies
Regards.
Similar Messages
-
Trouble in installation of ABAP trial 2007 on Vista Laptop
Hi,
I have downloaded the files from the SDN site and extracted them without any errors. When I run the setup, it displays "Running Installsheld Wizard..."and then I get this error----
"The installer is unable to run in graphical mode. Try running the instaler with the -console or -silent flag. "
The display resolution on my laptop is 1280x800 pixels. I have tried to change it too, but i keep etting the same error. Please Help.Thanks Patrick,
I tried what u recommended, and installed the ABAP trial 2007 software successfully ( after many unsuccessful attempts though! ) but I am again in trouble. I have installed the SAP GUI too. when I try to logon using the SAP Logon shortcut, after starting the application server, I get this error------
"Sapgui710
partner '127.0.0.1:sapdp00' not reached
WSAECONNREFUSED: Connection refused
Do you want to see the detailed error description?"
on selection Yes I get the details as follows -
"partner '127.0.0.1:sapdp00' not reached
Time Wed Oct 17 16:44:32 2007
Component NI (network interface)
Release 710
Version 39
Module nixxi.cpp
Line 2985
Method NiPConnect2
Return Code -10
System Call connect
Error No 10061
Error Text WSAECONNREFUSED: Connection Refused
Counter 1
I checked the SAPMMC Console and the Dispatcher shows the status Running but not connected to Message Server and then finally Stopped. Even restarting the NSP server doesnt change it. Am I doing anything wrong? Please help. -
Error during installation of SAP NetWeaver 2004s Abap Trial Version
The following error occurred during installation of SAP NetWeaver 2004s ABAP Trial Version:
ERROR 2008-03-13 09:47:27
FSL-00001 System call failed. Error 53 (Network path not found.) in execution of system call 'CreateFile' with parameter (
127.0.0.1\sapmnt\trans\bin\DOMAIN.CFG, GENERIC_READ|GENERIC_WRITE, FILE_SHARE_READ|FILE_SHARE_WRITE, NULL, CREATE_NEW, FILE_ATTRIBUTE_NORMAL, NULL), line (763) in file (synxcpath.cpp).
This error occurred at the end of the installation.
Any idea?
Thank's, Thiago.>
Thiago Amaral wrote:
> Ps: I already restarted my notebook.
That does not automatically start your instance. Have a look at the shortcuts SAP installed in your startmenu. There's both a startscript and a stopscript. -
Problem Installation Full ABAP Edition-Trial (with Web Dynpro for ABAP!)
Hi all,
I have a problem during installation of new Netweaver 2004s Trailversion. The problem is while installing MaxDB. In file MaxDBSAPNWPREV.log I found the following installationsteps (the error you will see at the bold part at the end):
(Oct 3, 2006 3:58:04 PM), Install, com.sap.installshield.maxdb.maxdb_call_sdbinst, err, An error occurred and product installation failed. Look at the log file G:\sapdb\NSP\log.txt for details.
(Oct 3, 2006 3:58:04 PM), Install, com.sap.installshield.maxdb.maxdb_call_sdbinst, err, ProductException: (error code = 601; message="An Error happened during call of MaxDB Tool sdbinst. Check end of Logfile D:/DOCUME1/ELFLEI1/LOCALS~1/Temp/MaxDBSAPNWPREV.log")
STACK_TRACE: 22
ProductException: (error code = 601; message="An Error happened during call of MaxDB Tool sdbinst. Check end of Logfile D:/DOCUME1/ELFLEI1/LOCALS~1/Temp/MaxDBSAPNWPREV.log")
at com.sap.installshield.maxdb.maxdb_call_sdbinst.install(maxdb_call_sdbinst.java:193)
at com.installshield.product.service.product.PureJavaProductServiceImpl.installProductAction(Unknown Source)
at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.getResultForProductAction (Unknown Source)
at com.installshield.product.service.product.InstallableObjectVisitor.visitComponent(Unknown Source)
at com.installshield.product.service.product.InstallableObjectVisitor.visitInstallableComponents(Unknown Source)
at com.installshield.product.service.product.InstallableObjectVisitor.visitProductBeans(Unknown Source)
at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.install(Unknown Source)
at com.installshield.product.service.product.PureJavaProductServiceImpl.installProduct(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
at java.lang.reflect.Method.invoke(Unknown Source)
at com.installshield.wizard.service.LocalImplementorProxy.invoke(Unknown Source)
at com.installshield.wizard.service.AbstractService.invokeImpl(Unknown Source)
at com.installshield.product.service.product.GenericProductService.installProduct(Unknown Source)
at com.installshield.product.service.product.PureJavaProductServiceImpl.installAssembly(Unknown Source)
at com.installshield.product.service.product.PureJavaProductServiceImpl.access$900(Unknown Source)
at com.installshield.product.service.product.PureJavaProductServiceImpl$Installer.execute(Unknown Source)
at com.installshield.wizard.service.AsynchronousOperation.run(Unknown Source)
Tue Oct 03 15:10:57 CEST 2006 MaxDB: Start SoftwareCheck
Tue Oct 03 15:10:57 CEST 2006 MaxDB: IndepProgPath: g:\sapdb\programs
Tue Oct 03 15:10:57 CEST 2006 MaxDB: IndepDataPath: g:\sapdb\data
Tue Oct 03 15:10:57 CEST 2006 MaxDB: Calling check for dbmcli
Tue Oct 03 15:10:57 CEST 2006 MaxDB: Software exists, Variable MAXDB_SOFTW_EXISTS set to YES
Tue Oct 03 15:10:57 CEST 2006 MaxDB: Calling check for existent database instances
Tue Oct 03 15:10:58 CEST 2006 MaxDB waiting for :"g:\sapdb\programs/pgm/dbmcli.exe" db_enum:
Tue Oct 03 15:10:59 CEST 2006 MaxDB: These database instances already exists =
Tue Oct 03 15:10:59 CEST 2006 MaxDB: End of SoftwareCheck!
Tue Oct 03 15:12:33 CEST 2006 MaxDB: Start of Extracting Software and Backup.
Tue Oct 03 15:57:03 CEST 2006 MaxDB: End of Extracting Software and Backup.
Tue Oct 03 15:57:03 CEST 2006 MaxDB: Start of CallSdbinst
Tue Oct 03 15:57:03 CEST 2006 MaxDB: IndepProgPath = g:/sapdb/programs
Tue Oct 03 15:57:03 CEST 2006 MaxDB: Stopping x_server
Tue Oct 03 15:57:03 CEST 2006 MaxDB program: g:/sapdb/programs/bin/x_server.exe
Tue Oct 03 15:57:03 CEST 2006 MaxDB: Found g:/sapdb/programs/bin/x_server.exe
Tue Oct 03 15:57:03 CEST 2006 MaxDB: Calling: "g:/sapdb/programs/bin/x_server.exe" stop
Tue Oct 03 15:57:05 CEST 2006 MaxDB: rc of x_server stop call = 0
Tue Oct 03 15:57:05 CEST 2006 MaxDB: inst_type = :restore:
Tue Oct 03 15:57:05 CEST 2006 MaxDB: Calling sdbinst with template option sapmds
Tue Oct 03 15:57:05 CEST 2006 MaxDB SID: NSP
Tue Oct 03 15:57:05 CEST 2006 MaxDB drive: G:\
Tue Oct 03 15:57:05 CEST 2006 MaxDB softwarepath: G:/sapdb
Tue Oct 03 15:57:05 CEST 2006 MaxDB Software location: G:/sapdb/NSP/_tempLocation
Tue Oct 03 15:57:05 CEST 2006 MaxDB backup_loc: G:/sapdb/NSP/_tempLocation/load/load_datasave
Tue Oct 03 15:57:05 CEST 2006 MaxDB program: G:/sapdb/NSP/_tempLocation/sdbinst.exe
Tue Oct 03 15:57:05 CEST 2006 MaxDB paramfile: G:/sapdb/NSP/_tempLocation/sapmds.txt
Tue Oct 03 15:57:05 CEST 2006MaxDB found sdbinst
Tue Oct 03 15:57:05 CEST 2006 MaxDB: Calling: G:/sapdb/NSP/_tempLocation/sdbinst.exe -t sapmds -f "G:/sapdb/NSP/_tempLocation/sapmds.txt" -p DBNAME=NSP -p SOFTWAREPATH="G:/sapdb" -p INSTANCEBACKUP="G:/sapdb/NSP/_tempLocation/load/load_datasave"
Tue Oct 03 15:57:12 CEST 2006 MaxDB sdbinst:
Tue Oct 03 15:57:12 CEST 2006 MaxDB sdbinst:
Tue Oct 03 15:57:12 CEST 2006 MaxDB sdbinst: Installation of MaxDB Software
Tue Oct 03 15:57:12 CEST 2006 MaxDB sdbinst: *******************************
Tue Oct 03 15:57:12 CEST 2006 MaxDB sdbinst:
Tue Oct 03 15:57:12 CEST 2006 MaxDB sdbinst:
Tue Oct 03 15:57:12 CEST 2006 MaxDB sdbinst: starting installation Tu, Oct 03, 2006 at 15:57:12
Tue Oct 03 15:57:13 CEST 2006 MaxDB sdbinst: operating system: Windows I386 NT 5.1 Service Pack 2
Tue Oct 03 15:57:13 CEST 2006 MaxDB sdbinst: callers working directory: D:/SAP_Install/SAPNW2004sABAPTrail/image
Tue Oct 03 15:57:13 CEST 2006 MaxDB sdbinst: installer directory: G:/sapdb/NSP/_tempLocation
Tue Oct 03 15:57:13 CEST 2006 MaxDB sdbinst: archive directory: G:/sapdb/NSP/_tempLocation
Tue Oct 03 15:57:13 CEST 2006 MaxDB sdbinst:
Tue Oct 03 15:57:13 CEST 2006 MaxDB sdbinst:
Tue Oct 03 15:57:36 CEST 2006 MaxDB sdbinst:
Tue Oct 03 15:57:36 CEST 2006 MaxDB sdbinst: starting preparing phase of package Base 7.6.00.32 32 bit
Tue Oct 03 15:57:36 CEST 2006 MaxDB sdbinst: -
Tue Oct 03 15:57:36 CEST 2006 MaxDB sdbinst:
Tue Oct 03 15:57:38 CEST 2006 MaxDB sdbinst: same package already installed
Tue Oct 03 15:57:38 CEST 2006 MaxDB sdbinst: checking consistence of package data in install registry...
Tue Oct 03 15:57:40 CEST 2006 MaxDB sdbinst: check files... ok
Tue Oct 03 15:57:40 CEST 2006 MaxDB sdbinst: check rte registration of package... ok
Tue Oct 03 15:57:40 CEST 2006 MaxDB sdbinst:
Tue Oct 03 15:57:40 CEST 2006 MaxDB sdbinst: skipping package
Tue Oct 03 15:57:40 CEST 2006 MaxDB sdbinst:
Tue Oct 03 15:57:40 CEST 2006 MaxDB sdbinst: starting preparing phase of package SAP Utilities 7.6.00.32 32 bit
Tue Oct 03 15:57:41 CEST 2006 MaxDB sdbinst: -
Tue Oct 03 15:57:41 CEST 2006 MaxDB sdbinst:
Tue Oct 03 15:57:41 CEST 2006 MaxDB sdbinst: same package already installed
Tue Oct 03 15:57:41 CEST 2006 MaxDB sdbinst: checking consistence of package data in install registry...
Tue Oct 03 15:57:42 CEST 2006 MaxDB sdbinst: check files... ok
Tue Oct 03 15:57:42 CEST 2006 MaxDB sdbinst: skipping package
Tue Oct 03 15:57:42 CEST 2006 MaxDB sdbinst:
Tue Oct 03 15:57:42 CEST 2006 MaxDB sdbinst: starting preparing phase of package SQLDBC 7.6.00.32 32 bit
Tue Oct 03 15:57:42 CEST 2006 MaxDB sdbinst: -
Tue Oct 03 15:57:42 CEST 2006 MaxDB sdbinst:
Tue Oct 03 15:57:42 CEST 2006 MaxDB sdbinst: same package already installed
Tue Oct 03 15:57:43 CEST 2006 MaxDB sdbinst: checking consistence of package data in install registry...
Tue Oct 03 15:57:43 CEST 2006 MaxDB sdbinst: check files... ok
Tue Oct 03 15:57:43 CEST 2006 MaxDB sdbinst: skipping package
Tue Oct 03 15:57:44 CEST 2006 MaxDB sdbinst:
Tue Oct 03 15:57:44 CEST 2006 MaxDB sdbinst: starting preparing phase of package JDBC 7.6.00.30
Tue Oct 03 15:57:44 CEST 2006 MaxDB sdbinst: -
Tue Oct 03 15:57:44 CEST 2006 MaxDB sdbinst:
Tue Oct 03 15:57:44 CEST 2006 MaxDB sdbinst: same package already installed
Tue Oct 03 15:57:45 CEST 2006 MaxDB sdbinst: checking consistence of package data in install registry...
Tue Oct 03 15:57:45 CEST 2006 MaxDB sdbinst: check files... ok
Tue Oct 03 15:57:45 CEST 2006 MaxDB sdbinst: skipping package
Tue Oct 03 15:57:45 CEST 2006 MaxDB sdbinst:
Tue Oct 03 15:57:45 CEST 2006 MaxDB sdbinst: starting preparing phase of package Server Utilities 7.6.00.32 32 bit
Tue Oct 03 15:57:45 CEST 2006 MaxDB sdbinst: -
Tue Oct 03 15:57:45 CEST 2006 MaxDB sdbinst:
Tue Oct 03 15:57:45 CEST 2006 MaxDB sdbinst: same package already installed
Tue Oct 03 15:57:45 CEST 2006 MaxDB sdbinst: checking consistence of package data in install registry...
Tue Oct 03 15:57:45 CEST 2006 MaxDB sdbinst: check files... ok
Tue Oct 03 15:57:46 CEST 2006 MaxDB sdbinst: skipping package
Tue Oct 03 15:57:46 CEST 2006 MaxDB sdbinst:
Tue Oct 03 15:57:46 CEST 2006 MaxDB sdbinst: starting preparing phase of package Database Kernel 7.6.00.32 32 bit
Tue Oct 03 15:57:46 CEST 2006 MaxDB sdbinst: -
Tue Oct 03 15:57:46 CEST 2006 MaxDB sdbinst:
Tue Oct 03 15:57:46 CEST 2006 MaxDB sdbinst: same package already installed
Tue Oct 03 15:57:46 CEST 2006 MaxDB sdbinst: checking consistence of package data in install registry...
Tue Oct 03 15:57:52 CEST 2006 MaxDB sdbinst: check files... ok
Tue Oct 03 15:57:52 CEST 2006 MaxDB sdbinst: check rte registration of package... ok
Tue Oct 03 15:57:52 CEST 2006 MaxDB sdbinst:
Tue Oct 03 15:57:52 CEST 2006 MaxDB sdbinst: skipping package
Tue Oct 03 15:57:52 CEST 2006 MaxDB sdbinst:
Tue Oct 03 15:57:53 CEST 2006 MaxDB sdbinst: starting preparing phase of package Messages MSG 0.3951
Tue Oct 03 15:57:53 CEST 2006 MaxDB sdbinst: -
Tue Oct 03 15:57:53 CEST 2006 MaxDB sdbinst:
Tue Oct 03 15:57:53 CEST 2006 MaxDB sdbinst: same package already installed
Tue Oct 03 15:57:53 CEST 2006 MaxDB sdbinst: checking consistence of package data in install registry...
Tue Oct 03 15:57:53 CEST 2006 MaxDB sdbinst: check files... ok
Tue Oct 03 15:57:53 CEST 2006 MaxDB sdbinst: skipping package
Tue Oct 03 15:57:53 CEST 2006 MaxDB sdbinst:
Tue Oct 03 15:57:53 CEST 2006 MaxDB sdbinst: starting preparing phase of package ODBC 7.6.00.32 32 bit
Tue Oct 03 15:57:53 CEST 2006 MaxDB sdbinst: -
Tue Oct 03 15:57:54 CEST 2006 MaxDB sdbinst:
Tue Oct 03 15:57:54 CEST 2006 MaxDB sdbinst: same package already installed
Tue Oct 03 15:57:54 CEST 2006 MaxDB sdbinst: checking consistence of package data in install registry...
Tue Oct 03 15:57:54 CEST 2006 MaxDB sdbinst: check files... ok
Tue Oct 03 15:57:54 CEST 2006 MaxDB sdbinst: skipping package
Tue Oct 03 15:57:54 CEST 2006 MaxDB sdbinst:
Tue Oct 03 15:57:54 CEST 2006 MaxDB sdbinst: starting preparing phase of package Webtools 7.6.00.32 32 bit
Tue Oct 03 15:57:54 CEST 2006 MaxDB sdbinst: -
Tue Oct 03 15:57:54 CEST 2006 MaxDB sdbinst:
Tue Oct 03 15:57:54 CEST 2006 MaxDB sdbinst: same package already installed
Tue Oct 03 15:57:55 CEST 2006 MaxDB sdbinst: checking consistence of package data in install registry...
Tue Oct 03 15:58:02 CEST 2006 MaxDB sdbinst: check files... ok
Tue Oct 03 15:58:02 CEST 2006 MaxDB sdbinst: skipping package
Tue Oct 03 15:58:02 CEST 2006 MaxDB sdbinst:
Tue Oct 03 15:58:03 CEST 2006 MaxDB sdbinst: starting preparing phase of package SQLDBC 76 7.6.00.32 32 bit
Tue Oct 03 15:58:03 CEST 2006 MaxDB sdbinst: -
Tue Oct 03 15:58:03 CEST 2006 MaxDB sdbinst:
Tue Oct 03 15:58:03 CEST 2006 MaxDB sdbinst: same package already installed
Tue Oct 03 15:58:03 CEST 2006 MaxDB sdbinst: checking consistence of package data in install registry...
Tue Oct 03 15:58:03 CEST 2006 MaxDB sdbinst: check files... ok
Tue Oct 03 15:58:03 CEST 2006 MaxDB sdbinst: skipping package
Tue Oct 03 15:58:03 CEST 2006 MaxDB sdbinst: installation of MaxDB Software finished successfully Tu, Oct 03, 2006 at 15:58:03
<b><b><b>Tue Oct 03 15:58:03 CEST 2006 MaxDB sdbinst: creating database NSP...
Tue Oct 03 15:58:03 CEST 2006 MaxDB sdbinst: ERROR: Backup check for 'G:\sapdb\NSP\_tempLocation\load\load_datasave' failed:
Tue Oct 03 15:58:04 CEST 2006 MaxDB sdbinst: File not found: G:\sapdb\NSP\_tempLocation\load\load_datasave</b>Tue Oct 03 15:58:04 CEST 2006 MaxDB sdbinst: installation exited abnormally at Tu, Oct 03, 2006 at 15:58:03
Tue Oct 03 15:58:04 CEST 2006 MaxDB: Error during call to sdbinst, rc= 1
Tue Oct 03 15:58:04 CEST 2006 MaxDB: Done with call_sdbinst
Tue Oct 03 15:58:04 CEST 2006 MaxDB: rc of sdbinst = 1
Tue Oct 03 15:58:04 CEST 2006 MaxDB: Start of CallSdbuninst
Tue Oct 03 15:58:04 CEST 2006 MaxDB: IndepProgPath: g:/sapdb/programs
Tue Oct 03 15:58:04 CEST 2006 MaxDB: dbmcli path: g:/sapdb/programs/pgm/dbmcli.exe
Tue Oct 03 15:58:04 CEST 2006 MaxDB: Calling check for db_enum in case of an abort
Tue Oct 03 15:58:05 CEST 2006 MaxDB: nsp doesn't exist. Nothing to do !
Tue Oct 03 15:58:05 CEST 2006 MaxDB: rc of Method: 3
Tue Oct 03 15:58:05 CEST 2006 MaxDB: IndepProgPath = g:/sapdb/programs
MaxDB: dbmcli_path = g:/sapdb/programs/pgm/dbmcli.exe
MaxDB: Database instance to drop: :NSP:
MaxDB: Instroot of NSP is: null
MaxDB: sdbuninst_option = :3
MaxDB: 0=uninstall all, 1=uninstall Kernel package, 2=drop database only, 3=do nothing
Tue Oct 03 15:58:05 CEST 2006 MaxDB: End of CallSdbuninst
Tue Oct 03 15:58:05 CEST 2006 MaxDB: End of uninstallation at java.lang.Thread.run(Unknown Source)</b></b>Please referr to the ideas on this thread.
Install Problems withe the NW04s ABAP Trial verssion
You have installed the loopback adapter and made the propriate entries in the hosts file, right?
Regards,
Rich Heilman -
Problems Installing ABAP Netweaver 7 - java.lang.NoClassDefFoundError:
When I try to install this version of a ABAP Netweaver in my notebook, with Windows XP, an error message appers saying that "java.lang.NoClassDefFoundError: runException in thread main "
I've already configured the enviroment variable and I've tested running javac through command line . The Microsoft Loopback adapter is configured too ( I think that this error dosent have any relation to this configuration).
The only topic that ive found in forum its here: Software Downloads and the solution propoused there doesn't works for me.
Can anyone help me?
ThanksHi,
it's me again
I think that my .jar is not corrupted because I've tried to install in another machines and the error doesn't occur and I've used this DVD in the same notebook, but in a VM without problems.
Well, then the files should be really ok.
Maybe a problem with SP2?
No, the trail version is working fine with SP2.
Before I have to leave the office now two additional advices/attempts from me:
1. Please make sure that you've deactivated all installed antivirus- and/or firewall-programs while installing - e.g. the in SP2 included one.
2. Try to download the latest Java version from http://java.com/en/download/index.jsp
3. Install it to a new directory
4. Point the environment variable JAVA_HOME to the new directory
5. Restart your computer
6. Test the proper installation of Java with java -version
7. Try to restart the setup.
If it fails again please check the event log of Windows. Perhaps there is a helpful error message logged.
But I cross the fingers that it's working.
Regards,
Norman Schröder
Sorry for my wrong english.
I think I have to say the same
But I can understand you very well so don't think about it. -
Error is coming at the time of Installation of SAP Netweaver 04's sp7
Hi All,
An Error is coming at the time of Installation of SAP Netweaver 04's sp7
Error: Unable to create an account for <SystemName> for <SAP Service sid>
can anyone suggest me regarding this.
Regards
PhanikumarHi
Thanks for ur suggestion,
I got the solution to this error.
The main reason is at the time of Intsalling Netweaver on windows 2003 server with Administrator rights, as per the Installtion manual we have to follow the windows password policy must and should and give the same for the Master Password while installing, then we won't get error.
Thanks & Regards
phanikumar -
Installation WAS ABAP UC + WAS J2EE Add In..and XI
Hello everybody,
Could anyone help me with this issue ??
I am going to install WAS ABAP and WAS J2EE Add in and after that do the XI installation.
I am reading the installation guides and I have some doubts about "Hardware and SOft Requirements Section".
I am going to do a Central System Installation (WAS ABAP + WAS JAVA Add in)
I have read the two installation guides: WAS ABAP and WAS J2EE.
Somewhere I read that I have to add requeriments. For example, if I am going to install CI and DB on the same server, then I have to add RAM for CI and RAM for DB.
The question is:
In the installation guide for WAS ABAP, Database Requeriment Disk is 14 GB (Unicode)
And in the installation guide for WAS JAVA, Database Req. Disk is 14 Gb (Unicode)
Have I to add 14 + 14 ?? Or 14 Gb is OK for the database with the two schemas ??
Same is for Paging File ?? I am 64 bit server.
It is a Development System
Many, many thanks !!We have a ABAP/J2EE 6.20 system running with only 8GB ram total on the system and we do get some swapping but for a development I would say we see great performance.
XI I can'T say though... -
ABAP Netweaver 7.0 Trial wont connect to SAP Logon
I just installed the ABAP Netweaver trial and for some reason am getting the following error when I try to connect from the login gui:
partner '127.0.0.1:sapdp00' not reached
WSAECONNREFUSED: Connection refused
I get the following error when I click the icon for Start Application server:
The Service name is invalid
More help is available by typing NET HELPMSG 2185
The system cannot find the path specified
=======Start database failed!
Press any key to continue
When I am in MMC and click on Start, I am prompted for a Username and password which doesnt work.
5/24
The syslog is displaying the following:
SAP-Basis System: Stop Msg Server, PID 1292
SAP-Basis System: Start Msg Server, 1 times since system startup. PID 1292
SAP-Basis System: Buffer SCSA Generated with Length 4096
Operation trace: New System Log File Started with Number 0
Edited by: David Kupratis on May 24, 2008 8:28 PM
Edited by: David Kupratis on May 24, 2008 8:32 PMHi,
insert into the file C:WindowsSystem32driversetcservices the item:
sapmsNSP 3600/tcp
Perhaps you have to reboot the server.
Kind regards,
Günther -
Hello,
we want to apply a new SP stack to a NW2004s (ECC 6.0) - dual stack (Java/ABAP) with PI(XI).
The ABAP stack is sucessfully patched yet,
but the Java stack needs still to be patched!
In the SPS guide for SPS 9 and some OSS notes you can read that during the patching of the Java stack, the whole system (ABAP and Java engine) are restarted several times. But the JSPM should ask you before the restart.
Do you have experiences how long the patching of the Java stack will take (downtime)?
How often needs the system to be restarted?
Is it possible to work with the ABAP engine (ABAP development, etc.) during the installation of the Java SPS with JSPM until the system needs to be restarted?
How is it possible to minimize the downtime of the system during the Java SPS installation?
Thanks in advance!
Best regards,
StephanHi Stephan,
"Do you have experiences how long the patching of the Java stack will take (downtime)?"
I believe this is most highly dependent on the hardware. Although some patches will deploy more objects than others, the deploy time is shorter on better/faster hardware. I applied SP9 on my laptop PC (java only, no ABAP stack) and it took a few hours total -- including my processing and error correcting time. My laptop has only 2 GB RAM so this process was greatly slowed by the amount of available memory (I was running other applications, like Outlook, etc.) resulting in a lot of disk swapping.
"How often needs the system to be restarted?"
Again, I have a java only installation, no ABAP, but I believe there was only 1-2 system restarts. The system had to be restarted after the application of the java kernel part of the patch, then shutdown and restarted again for the offline deployment phase. I cannot remember if there was a restart after the online deployment phase.
"Is it possible to work with the ABAP engine (ABAP development, etc.) during the installation of the Java SPS with JSPM until the system needs to be restarted?"
Yes.
"How is it possible to minimize the downtime of the system during the Java SPS installation?"
I think the best way is to have the best hardware! Also, be sure to be thoroughly prepared by reading the guide, all of the Notes, etc. I was slowed by a previously correctable error (my administrator password had been previously changed and I had not changed it in the secure store -- Note 701654).
Best Regards,
Matt -
Reinstallation SAP ABAP Netweaver issue message server not connected
hi ,
i am trying to reinstall SAP ABAP Netweaver but getting error in step 24 of 27. i am getting the following error.
WARNING 2010-07-20 08:52:08.078 iaxxcmsclient.cpp:93
CIaMsgClient::CIaMsgClient(localhost, 3900)
Connect to message server (localhost/3900) failed: NIECONN_REFUSED.
INFO 2010-07-20 08:52:08.078
CJSlibModule::writeInfo_impl()
State of instance NSP/DVEBMGS00 changed from ABAP: UNKNOWN to ABAP: UNKNOWN.
WARNING 2010-07-20 08:52:37.171 iaxxcmsclient.cpp:93
CIaMsgClient::CIaMsgClient(localhost, 3900)
Connect to message server (localhost/3900) failed: NIECONN_REFUSED.
WARNING 2010-07-20 08:53:07.156 iaxxcmsclient.cpp:93
CIaMsgClient::CIaMsgClient(localhost, 3900)
Connect to message server (localhost/3900) failed: NIECONN_REFUSED.
WARNING 2010-07-20 08:53:36.125 iaxxcmsclient.cpp:93
CIaMsgClient::CIaMsgClient(localhost, 3900)
Connect to message server (localhost/3900) failed: NIECONN_REFUSED.
Please do tell me how to resolve this issue.
thanks,
tanmayaHi Tanmaya,
Question: How to find whether the port is blocked or not?
(A) You can check the message server port in txn SMMS or dev_ms trace in ST11 to verify if the port is correctly set. If it is and you cannot connect to the message server then you will need to find out which program/service is occupying port 3900. So please follow the steps below:-
(A1) On Unix there is a program called LSOF available which shows ALL programs that occupies all ports. SAP Note [164937|http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes/sdn_oss_bc_cst/~form/handler%7b5f4150503d3030323030363832353030303030303031393732265f4556454e543d444953504c4159265f4e4e554d3d313634393337%7d] shows were you can get this program.
(A2) On Windows the equilivent of LSOF is Process Explorer from the Sysinternals Suite. This is available on the MS website [here|http://technet.microsoft.com/en-us/sysinternals/bb842062.aspx]. You can use this to filter by port.
So using these programs you will be able to see which programs occupy all ports on your server and either remove or disable them.
P.S. You can use SAP Note [421359|http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes/sdn_oss_bc_cst/~form/handler%7b5f4150503d3030323030363832353030303030303031393732265f4556454e543d444953504c4159265f4e4e554d3d343231333539%7d] to bind any port to any service on Unix including "protected" ports !!!
Hope this helps
Michael -
I want to record new installation number for NetWeaver PI system
Hi,
I filled and send call of form to SAP?
They sent me new installation number for NetWeaver SQL installation.
I want to record new installation number for NetWeaver PI system into service.sap.com. How?
I need to do this for CD/DVD ordering for installation of NetWeaver PI with Ms-SQL.
Thanks.Hi,
You can order the DVDs in http://service.sap.com/swdc.
But you have already have the netweaver dvds, so you can install PI you dont need other dvds again.
Regards,
Vamshi. -
Hi,
Does anybody know whether it is possible to configure ADS in the ABAP Netweaver Trial. If so, how?
kind regards MaartenIs it possible to install both the ABAP netweaver trial and the JAVA netweaver trial. If so, I already installed the ABAP Netweaver Trial, how can I install the Java Netweaver Trial besides the ABAP stack. How can I avoid that I get error messages because I already installed a SAP system and a database?
kind regards Maarten -
Rapid Installer for ABAP stack
Hi,
Can anyone help me find the links to download of Rapid Installer for ABAP stack?
I have downloaded NW Rapid Installer 2.5 but apparently that is just Web AS Java. That's what I could conclude from the documentation that was downloaded with Rapid Installer 2.5. I might be wrong as I am a newbie.
Thanks in advance.Rapid installer is only for stand alone Java stack.
- Digesh Joshi -
Trouble completing installation upgrade to PP CS5 from DVD.
Trouble completing installation upgrade to PP CS5 from DVD. I am 99% through the installation, but says I need to close safarinotificati to continue. All my applications were closed, including Safari and I've never heard of safarinotificati
Please advise of anyone knows what I can do. The only option in the window is to cancel the installation.Hi Lanaid,
Welcome to Adobe Forums.
Please open activity monitor and check if there is any entry for safari in there.
If yes, please close the process and then try.
Thanks -
Installation for SAP Netweaver 2004s stops
Installation for SAP Netweaver 2004s stops - I get the following errors:
ERROR 2008-06-15 05:40:13.406
CJS-00030 Assertion failed: in function (nothrow) { if (nothrow == undefined) { nothrow = false; } NW.trace("NW.getDirProfile(", nothrow, ")"); var retval; if (row.dir_profile) { retval = FSPath.get(row.dir_profile); } else { if (!nothrow) { var pf = this.getPersistentDefaultProfile(); var dirpf = pf.resolveExtended("DIR_PROFILE"); if (dirpf) { retval = FSPath.getPath(dirpf.value()); } else { ASSERT(arguments.callee, false, "DIR_PROFILE undefined: profile not yet loaded."); } row.dir_profile = retval.toString(); this._updateRow(row); } else { NW.trace("NW.getDirProfile() done, returning undefined"); } } NW.trace("NW.getDirProfile() done: ", retval); return retval;}DIR_PROFILE undefined: profile not yet loaded.
ERROR 2008-06-15 05:40:13.406
MUT-03025 Caught ESAPinstException in Modulecall: ESAPinstException: error text undefined.
ERROR 2008-06-15 05:40:13.406
FCO-00011 The step fillTrexContext with step key |rapidinstaller|ind|ind|ind|ind|0|0|rapid_Trex|ind|ind|ind|ind|8|0|fillTrexContext was executed with status ERROR .
INFO[E] 2008-06-15 05:39:54.531
FSL-02077 File system export (share) saploc does not exist.
INFO[E] 2008-06-15 05:40:13.390
FSL-02077 File system export (share) sapmnt does not exist.
Please help.Hello. Check your shares in "computer management" are you see "sapmnt" and "saploc" ? Read this for example Issues in Installing Web AS - Java [ FSL-02077 File system export (share)]
Regards.
Maybe you are looking for
-
UNLIMITED DATA PLANS! PLEASE BRING IT BACK VERIZON TO EVERYONE!
I think Verizon should bring back the Unlimited Data Plans because, many students uses so much Data for Videos for their homework and Videos takes up so much Data and there is no way an average family can afford to pay over $100 for a 20GB more Data
-
Passing errors back to Source system in proxy in Sync communtion
Hello Experts, I am developing a Sync Proxy-JDBC scenario. It works perfectly fine. In case if there is any error while delivering the data to JDBC receiver, we see error in SXMB_MONI in PI but can we pass same error to Source? i tried to use fault d
-
HT1725 iPad crashed during download so I didn't get my purchase
I purchased a Smurf Village special for Smurfberries but the iPad crashed during the download so my iTunes account has been debited but I don't have the Smurfberries . I've read the Apple page and tried to follow the instructions for retrieval but
-
Anyone know why Quicktime has no sound with AVI movies but Mpegs work fine?
-
Can I set up my mac Keyboard in windows 7 with a dongle bluethooth?
my pc computer does not have bluetooth! I had a dongle bluethooth USB and i trying to use my mac keayboard!