Trouble in installing Workflow Manager 1.0

Hi All,
When I tried to install Workflow Manager 1.0 , I got the following error.
I downloaded the Web Platform Installer and installed it.
Still I get the same error.
Please help me to troubleshoot the error.

Hi Muthukumar;
You must ensure Web Platform Installer version should be same on the server where you are downloading Workflow Manager 1.0 files and on the server where you are installing Workflow Manager 1.0 files for offline installation scenarios.Workflow Manager 1.0
Installation requires valid Web Platform Installer Version on Workflow Server.
If you want to install Workflow Manager 1.0 on servers without internet connectivity, you will run into problems with the Web Platform Installer, the only tool Workflow Manager 1.0 can be installed with.
There is a command line tool of Web Platform Installer, where you can download the installation files and all of its dependencies to a internet accessible machine, move it over to one of your servers and install it in offline mode.
Take the following steps to do so:
Download the
WebPICMD.exe Package from the MS Download Center and unzip it to a folder (C:\WebPICMD\WebPICMD.exe in our case)
Open a Command Prompt, navigate to the folder you extracted the tool and execute the following command:
WebpiCmd.exe /Offline /Products:WorkflowManager /Path:D:\Temp\WorkflowManager\
This will initiate a download with all the related components into the provided folder.
Copy the WebPICMD.exe to the server where you want to install the WorkflowManager 1.0, in our example to
D:\Temp\WebPICMD\WebPICMD.exe
Copy the downloaded files to your server where you want to install the WorkflowManager 1.0, in our example to
D:\Temp\WorkflowManager 
Open a Command Prompt, navigate to the folder you copied the WebPICMD.exe tool and execute the following command:
WebPICMD.exe /Install /Products:WorkflowManager
/AcceptEULA /SuppressReboot
/Log:./WorkflowManager.log /Xml:file:///D:\Temp\WorkflowManager\feeds\shadow-webproductlist.xmlThis will initiate the installation of the Workflow Manager 1.0 and its dependencies. The outcome of the installation will be logged to the WorkflowManager.log
file. The above line will suppress reboots and will accept the license terms automatically.
A log file will be created at the following path, where you can see the process and the warnings/errors/information about the installation:
%localappdata%\microsoft\web platform installer\logs\webpicmd
You could also go through these helpful
links .
Please revert back for any further help.
Regards
Prasant Chhetri

Similar Messages

  • Getting Error while Installing Workflow Manager 1.0 on Sharepoint 2013 On-Prem server

    I am trying to install Workflow Manager 1.0 on our SharePoint Server 2013 which is On-Prem installation. The SharePoint Server 2013 is functioning correctly. During the installation of Workflow Manager 1.0 on the same SharePoint 2013 server, I receive the
    following message: "Port number 9355 specified for HTTPS Port is blocked" I have checked our firewall Inbound rules and this port is not blocked.
    Any reason why this could be happening or did I miss anything?
    Thanks Snehal H.Rana SharePoint Consultant

    I am happy to inform you that I was able to resolve this error. I configured this on different ports other than 9355. We need to modify 2 files called "ClusterManifest.1.0.xml" and "ClusterManifest.current.xml" in c:\Program
    Files\Windows Fabric\Bin. They were pointing to older FQDN under following node:
     <NodeList>
            <Node NodeName="yourserverfqdn" IPAddressOrFQDN="yourserverfqdn" IsSeedNode="true" NodeTypeRef="DefaultNodeType" />
          </NodeList>
    These files won't let you edit directly in notepad so you will need to make a copy of these files (just in case). Open up the notepad as "Run As Administrator". Drag these files to the notepad. After you are done editing, save these as original
    names but make sure that the extension is .xml
    You will also need to do IISReset
    That did the trick for me.
    Thanks Snehal H.Rana SharePoint Consultant

  • Can you install Workflow Manager 1.0 on Central Admin App Server Machine in 3-tier SharePoint Farm?

    Hi,
    I have just realised when looking at doing a Workflow that 2013 Workflows not available (you need to install Workflow Manager Farm). I understand why from a tenant installation perspective, but we are on-premise.
    Can someone tell me if I can install Workflow Manager 1.0 (seen you have to now install WM 1.0 Refresh version) on the Central Admin App Server Machine in a 3 tier SharePoint farm. 3 WFE, 4 APP Servers, 1 DB Server and 1 DB Analysis Services Server.
    I did test on a test farm 1WFE, 1 APP Server (with CA) and 1 Database Server. We are getting issues with the WFE Server having issues booting up or losing connection - possibly faulty network card. This may in no way be related to the install,
    but just in case. 
    Any help appreciated.
    Thanks.
    John.

    Yes, you can install WFM on any server in a SharePoint farm.
    Trevor Seward
    Follow or contact me at...
    &nbsp&nbsp
    This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

  • Do i need another Virtual machine rather than sharepoint server to install workflow manager ?

    Hi ,
         I have installed sharepoint 2013 on a single server with a built-in-database. And i have installed OWA in another virtual machine. Now i am trying to create a workflow. I have downloaded and installed sharepoint designer and workflow
    manager in the sharepoint 2013 itself. Do i need to install workflow manager in another server and make it to communicate with sharepoint server ? And how to email-id in workflow when i tried in sharepoint designer we have select the user. How to allocate
    e-mail id for users ?

    Creating new VM is choice of your architecture. Workflow Manager only requires below.
    Workflow Manager 1.0. Email ID will be automatically picked from the participants from AD.
    .NET Framework 4 Platform Update 3 or .NET Framework 4.5
    Service Bus 1.0
    Workflow Client 1.0
    PowerShell 3.0
    The following additional requirements must be met before you can run Configuration Wizard to configure Workflow:
    Instance of SQL Server 2008 R2 SP1, SQL Server Express 2008 R2 SP1, or SQL Server 2012.
    TCP/IP connections or named pipes must be configured in SQL Server.
    Windows Firewall must be enabled.
    Ports 12290 and 12291 must be available.
    Bala

  • What is the windows server 2013 license version than I need to install workflow manager 1.0

    what is the windows server 2013 license version than I need to install workflow manager 1.0?
    enterprise or standard? can I install it on datacenter?
    please provide me with the reference.
    thanks

    Workflow Manager will work with either SharePoint Enterprise or Standard.  It doesn't work well with Foundations since it depends on User Profiles to pass user identity to the workflow.  And yes you can install it on Windows Server datacenter edition.
     Here are the supported platforms for installation
    http://msdn.microsoft.com/en-us/library/jj193487(v=azure.10).aspx
    This article talks about integration with SharePoint and states that Foundation is not supported, but it doesn't differentiate between the Server editions, so any edition will do.
    http://technet.microsoft.com/en-us/library/jj658588.aspx
    Paul Stork SharePoint Server MVP
    Principal Architect: Blue Chip Consulting Group
    Blog: http://dontpapanic.com/blog
    Twitter: Follow @pstork
    Please remember to mark your question as "answered" if this solves your problem.

  • Best Practice on installing Workflow Manager on a separate box

    Hi,
    We are installing Workflow Manager 1.0 to work with our SP2013 farm, which is fairly simple.
    However we anticipate a significant  amount of workflow work in the future. 
    Could you please share your thoughts/experience/lessons learnt on Having WF Manager on a separate box compared to having it on the same box as SP2013 Front end server in terms of
    1. Scalability
    2. Stability 
    3. Ease of Installation/Management  
    etc
    Thanks a lot.
    Dineth

    Hi Dineth,
    Thanks for posting your query,
    Kindly browse the below mentioned URLs to know about the best practices and installation step by step
    http://msdn.microsoft.com/library/azure/jj730571%28v=azure.10%29.aspx
    http://www.sjoukjezaal.com/blog/2014/05/sharepoint-2013-workflows-part-2-installing-and-configuring-the-workflow-manager/
    I hope this is helpful to you, mark it as Helpful.
    If this works, Please mark it as Answered.
    Regards,
    Dharmendra Singh (MCPD-EA | MCTS)
    Blog : http://sharepoint-community.net/profile/DharmendraSingh

  • Install workflow manager using DSC powershell

    Hi,
    i am trying to install workflow manager using DSC powershell.
    I am using WebpiCmd.exe to install it.
    Below is the DSC powershell script
    configuration C_WFMgr
        Node $AllNodes.NodeName
            Script WF_Install
                GetScript = { @{ Name = "WF_Install" } }
                TestScript = {                
                    $false
                SetScript =
                $currentPrincipal = New-Object Security.Principal.WindowsPrincipal( [Security.Principal.WindowsIdentity]::GetCurrent() )
                if ($currentPrincipal.IsInRole( [Security.Principal.WindowsBuiltInRole]::Administrator ) -eq $false) {
                (get-host).UI.RawUI.Backgroundcolor="DarkRed"                                   
                    write-Verbose "Warning: PowerShell is not running as an Administrator.`n"  
                    exit 
                 else
                    #set-executionpolicy "Execution user account"
                    write-Verbose $currentPrincipal.Identity.Name
                    write-Verbose "Warning: PowerShell is running as an Administrator.`n"                
                    Write-Verbose "Workflow Manager installation started.."
                    $cmd = "& 'C:\WorkflowManagerFiles\bin\WebpiCmd.exe' /Install /Products:WorkflowManager /XML:c:/WorkflowManagerFiles/feeds/latest/webproductlist.xml /log:C:/Users/backup/t1.txt
    /AcceptEula"
                    Invoke-Expression $cmd | Write-Verbose                             
    Below is the error message
    Started downloading products...
     Started installing Products...
     Started installing: 'Execute ASP.NET IIS Registration tool
     Started downloading: 'Workflow Manager Client 1.0 Refresh'
     Downloaded: 'Workflow Manager Client 1.0 Refresh'
     Started downloading: 'Service Bus 1.0'
     Downloaded: 'Service Bus 1.0'
     Started downloading: 'Workflow Manager 1.0'
     Downloaded: 'Workflow Manager 1.0'
     Install completed (Success): 'Execute ASP.NET IIS Registra
    tion tool'
     Execute ASP.NET IIS Registration tool : Installed
     Started installing: 'Workflow Manager Client 1.0 Refresh'
     Install completed (Failure): 'Workflow Manager Client 1.0
    Refresh'
     WorkflowClient : Failed.
     Error opening installation log file. Verify that the speci
    fied log file location exists and is writable.
     Started installing: 'Service Bus 1.0'
     Install completed (Failure): 'Service Bus 1.0'
     ServiceBus : Failed.
     Error opening installation log file. Verify that the speci
    fied log file location exists and is writable.
     DependencyFailed: Workflow Manager 1.0
     Verifying successful installation...
     Execute ASP.NET IIS Registration tool              True
     Workflow Manager Client 1.0 Refresh                False
         Log Location: C:\Windows\system32\config\systemprofile
    \AppData\Local\Microsoft\Web Platform Installer\logs\install\2015-01-02T14.58.57\WorkflowManagerClient_x64.txt
     Service Bus 1.0                                    False
         Log Location: C:\Windows\system32\config\systemprofile
    \AppData\Local\Microsoft\Web Platform Installer\logs\install\2015-01-02T14.58.57\Service_Bus.txt
     Workflow Manager 1.0                               False
     Install of Products: FAILURE

    I am pretty sure that DSC requires WFM.  If  I am right then WFM is in use and cannot be replaced unless you specify another logfile location.  Look at the DSC and see how to specify a new log location that can be used for the install. 
    If the MSU is built correctly then you will require a reboot to update the install.
    Try just doing WFM alone until you work it out.
    I also recommend posting in the Management forum for any other issues that might be known.
    Management
    DSC is a work in progress so many things have to be worked out as you need them.  Be sure to get the latest kits.  I think we are at Wave 9 now.
    PowerShell
    DSC Resource Kit Wave 9
    ¯\_(ツ)_/¯

  • Install workflow manager using DSC declarative configuration

    I am trying to install workflow manager using below DSC powershell script.
    Configuration
    C_Pkg_WFInstall
    Node $AllNodes.NodeName
    Package C_Pkg_WFInstall
    Ensure = "Present"
    Name = "Workflow Manager Client 1.0"
    Path = "C:\WorkflowManagerFiles\bin\WebpiCmd.exe"
    Arguments =
    "/Install /Products:'Workflow Manager Client 1.0' /XML:'c:/WorkflowManagerFiles/feeds/latest/webproductlist.xml' /log:'c:/users/backup/workflow.txt' /AcceptEula"
    ProductId =
    "A5ABAF5F-B5B6-44B3-B69F-2E13DC60FC9F"
    $ConfigData
    = @{
    AllNodes = @(
        NodeName =
    "CHN-AERO-VM28";         
    C_Pkg_WFInstall
    -ConfigurationData
    $ConfigData –Verbose
    Start-DscConfiguration
    -Wait -force
    -Verbose -Path
    .\C_Pkg_WFInstall
    And i get the below error
    PowerShell provider MSFT_PackageResource 
    failed to execute Set-TargetResource functionality with error message: The return code -1 was not expected. Configuration is likely not
    correct
    + CategoryInfo         
    : InvalidOperation: (:) [], CimException
    + FullyQualifiedErrorId : ProviderOperationExecutionFailure
    But while installing from command prompt window i could install the below list successfully
    IdentifyingNumber : {A5ABAF5F-B5B6-44B3-B69F-2E13DC60FC9F}
    Name              : Workflow Manager Client 1.0
    IdentifyingNumber : {04A7199E-565D-4654-88A3-80A9A7BADDD9}
    Name              : Workflow Manager 1.0
    IdentifyingNumber : {F438C511-5A64-433E-97EC-5E5343DA670A}
    Name              : Service Bus 1.0
    I tried with all the above 3 product ids, its not working.

    Thanks for your reply.
    I get the below error in eventviewer - Applications and Services Log - Windows Powershell
    The description for Event ID 600 from source PowerShell cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the
    local computer.
    If the event originated on another computer, the display information had to be saved with the event.
    The following information was included with the event:
    Alias
    Started
     ProviderName=Alias
     NewProviderState=Started
     SequenceNumber=1
     HostName=Default Host
     HostVersion=4.0
     HostId=979b4813-7bd4-47d7-9729-4166ae91e9c1
    The handle is invalid
    Log Name : Windows PowerShell
    Source : PowerShell (PowerShell)
    Event ID : 600
    Task Category : Provider Lifecycle
    I got the same error message in subsequent logs but the providername is different as below
     ProviderName=Environment 
     ProviderName=FileSystem  
     ProviderName=Function  
     ProviderName=Registry 
     ProviderName=Variable
    The description for Event ID 400 from source PowerShell cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local
    computer.
    If the event originated on another computer, the display information had to be saved with the event.
    The following information was included with the event:
    Available
    None
     NewEngineState=Available
     PreviousEngineState=None
     SequenceNumber=13
     HostName=Default Host
     HostVersion=4.0
     HostId=979b4813-7bd4-47d7-9729-4166ae91e9c1
     EngineVersion=4.0
     RunspaceId=6374c946-1219-4870-bc51-528faae9671d
    Log Name : Windows PowerShell
    Source : PowerShell (PowerShell)
    Event ID : 400
    Task Category : Engine Lifecycle
    But i believe the problem is with either the product name or product id, since it installs three products on one invoke, i dont know which product id we need to give. i tried with all the above 3 product ids. Its not working.
    I think by default DSC powershell runs under system account "NT AUTHORITY\SYSTEM".

  • Errors when installing Workflow Manager

    I am trying to install WF Manager, but with no success.
    On the same machine, I have installed SQL Server 2014, SharePoint 2013 with SP1 and WF Manager.
    I installed WF manager (account that runs WF manager is sp farm admin) and registered with command
    Register-SPWorkflowService -SPSite "http://dev/" -WorkflowHostUri "http://localhost:12291" -AllowOAuthHttp
    In Central Admin, when I click on "Workflow Service Application Proxy ", I get message that WF is connected. Backend service is running. In SP Designer, I can create 2013 Workflow and publish it, but that WF does not work, it break instantly.
    In SP logs, I get this error when I try to activate feature that contains workflow (solution that contains WF created in Visual Studio):
    http://radioaddictsanonymous.com/view/635399286724222582163282/error-while-deploying-sp2013-workflow-from-vs2012-nullreferenceexception
    So, I deleted WF manager and service bus and reinstalled it, but with no luck. Now backedn service is not working, and I can't start it, getting this error:
    "The Workflow Manager Backend service could not be started  A system error has occurred  System error 1067 has occurred"
    In Event Viewer I have this error:
    https://social.technet.microsoft.com/Forums/office/en-US/de554aed-c9ae-4725-82fa-251446bacc20/workflow-manager-10-sharepoint-2013-the-process-was-terminated-due-to-an-unhandled-exception?forum=sharepointgeneral
    I have tried to reinstall everything couple of times, but it doesn't work. I think that I am not deleting everything related to workflow before reinstallation. How can I unregister already registered WF service and reinstall everything correctly??

    Hi,I had already done disableloopbackcheck and it did not matter.No problem with creating scopes (using powershell) but pairing fails anyway.Here is the config from a local explorer connection to the HTTPS port:(And following it, you may see the result of
    a scope enumerator script)
    <?xml version="1.0"?>
    <ScopeInfo xmlns="http://schemas.microsoft.com/workflow/2012/xaml/activities" xmlns:i="http://www.w3.org/2001/XMLSchema-instance">
    <ChildScopeCount>3</ChildScopeCount>
    <DefaultWorkflowConfiguration/>
    <Description>For / sample only</Description>
    <LastModified>2013-11-08T21:22:00.967</LastModified>
    <LastRevised>2013-11-08T00:04:31.88</LastRevised>
    <Path>/</Path>
    <SecurityConfigurations>
    <ScopedSecurityConfiguration i:type="WindowsSecurityConfiguration">
    <Name>Microsoft.Workflow.Management.Security.WindowsSecurityConfiguration</Name>
    <WorkflowAdminGroupName>altemis\WorkflowAdmins</WorkflowAdminGroupName>
    </ScopedSecurityConfiguration>
    </SecurityConfigurations><
    Status>Active</Status>
    </ScopeInfo>
    PS C:\Shared> C:\Shared\WF Script-Enumaret Scopes.ps1
    Name:
    Path: /
    Status: Active
    User Comments: For / sample only
    Parent: None
    Children: 3
    Exception calling "GetChildScopes" with "0" argument(s): "Scope '/$ChildScopes' was not found.  HTTP headers received from 
    the server - ActivityId: 616224db-0321-450a-92ef-f03384c008a2. NodeId: ALTEMIS-SVR02. Scope: /$ChildScopes. Client 
    ActivityId : 649dba85-dc89-0002-d9bf-9d6489dcce01."
    At C:\Shared\WF Script-Enumaret Scopes.ps1:21 char:9
    +         $manager.GetChildScopes() | % { WriteScopeInfo $scopeUri $_.Path $scope. ...
    +         ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
        + CategoryInfo          : NotSpecified: (:) [], MethodInvocationException
        + FullyQualifiedErrorId : ScopeNotFoundException
    Muharrem

  • Install workflow manager on sharepoint 2013

    hi , I install work flow manager .but i could not see  workflow 2013  in sharepoint 2013 .why ?

    http://technet.microsoft.com/en-us/library/jj658588%28v=office.15%29
    There is service application\option in SharePoint 2013 where you can see workflow 2013.
    You can see workflow 2013 in designer which comes with Workflow manager 2013. Also you have to configure workflow manager 2013 as per below:
    http://www.harbar.net/articles/wfm2.aspx
    http://blog.cloudshare.com/2013/01/15/how-to-install-and-configure-workflow-infrastructure-in-sharepoint-2013/
    http://lennytech.wordpress.com/2013/06/02/configuring-sharepoint-2013-to-use-workflow-manager-1-0/

  • Re installing Workflow Manager SharePoint 2013

    In my domain I have only 1 SharePoint Machine where I also install the Workflow Service Manager, but now I'm facing alot of problems with the workflow manager, What I want is to Totally Remove or Uninstall the workflow Manager, and re-Install it with a very
    clean steps. Could someone help me !!

    Hi,
    Please refer to the link below to uninstall SharePoint 2013 Workflow Manager Farm:
    http://sharepointinaction.wordpress.com/2014/01/27/uninstallingremoving-sharepoint-2013-workflow-manager-farm/
    In addition, here is the reference for you to install and configure workflow for SharePoint Server 2013:
    http://technet.microsoft.com/en-us/library/jj658586(v=office.15).aspx
    You could also refer to the video series:
    http://technet.microsoft.com/en-us/library/dn201724(v=office.15).aspx
    Regards,
    Rebecca Tu
    TechNet Community Support

  • Workflow Manager 1.0 will install but NOT configure.

    Hello everyone,
         I have successfully installed Workflow Manager 1.0 (and its prerequisites) on my Server 2008 R2 SP1 machine
    that is hosting Sharepoint 2013.  I attempt to go into the Workflow Manager Configuration.  That comes up and asks me if I want to Create new farm with Default Settings, New Farm with custom settings, or existing farm.  I've tried both Default
    settings AND Custom settings.
        When the configuration wizard comes up, I attempt to fill out the necessary information.  It seems to connect
    to the SQL server without a problem.  I only run into an issue when setting the USER ID.  The program totally freezes up and force closes. 
        I have verified that the USERID is in the correct format and tried multiple different formats.  The problem
    is that the moment I move the cursor from the USERID field to ANY other field, the program force closes.  I'm not able to hit submit, I'm not able to change any other options.  The moment USERID is manipulated or the cursor LEAVES the USERID field,
    the program force closes.  It won't even allow me to put in a password before it force closes.
         Customer domain is running in Windows Server 2003 Enterprise Edittion SP2.
    Any ideas?
    Thank you very much!
    I have copied the errors from event viewer below:
    APPLICATION ERROR
    Faulting application name: Microsoft.Workflow.Deployment.ConfigWizard.exe, version: 1.0.20922.0, time stamp: 0x505e1b30
    Faulting module name: KERNELBASE.dll, version: 6.1.7601.17965, time stamp: 0x506dcae6
    Exception code: 0xe0434352
    Fault offset: 0x000000000000bccd
    Faulting process id: 0x17f8
    Faulting application start time: 0x01cddee198ece72e
    Faulting application path: C:\Program Files\Workflow Manager\1.0\Microsoft.Workflow.Deployment.ConfigWizard.exe
    Faulting module path: C:\Windows\system32\KERNELBASE.dll
    Report Id: 22ab8b69-4ad5-11e2-af8f-005056965915
    .NET Runtime Error
    Application: Microsoft.Workflow.Deployment.ConfigWizard.exe
    Framework Version: v4.0.30319
    Description: The process was terminated due to an unhandled exception.
    Exception Info: System.Runtime.InteropServices.COMException
    Stack:
       at System.DirectoryServices.AccountManagement.PrincipalContext.DoLDAPDirectoryInitNoContainer()
       at System.DirectoryServices.AccountManagement.PrincipalContext.DoDomainInit()
       at System.DirectoryServices.AccountManagement.PrincipalContext.Initialize()
       at System.DirectoryServices.AccountManagement.PrincipalContext.get_QueryCtx()
       at System.DirectoryServices.AccountManagement.Principal.FindByIdentityWithTypeHelper(System.DirectoryServices.AccountManagement.PrincipalContext, System.Type, System.Nullable`1<System.DirectoryServices.AccountManagement.IdentityType>, System.String,
    System.DateTime)
       at System.DirectoryServices.AccountManagement.UserPrincipal.FindByIdentity(System.DirectoryServices.AccountManagement.PrincipalContext, System.String)
       at Microsoft.ServiceBus.Commands.Common.SecurityHelper.IsUserValid(System.DirectoryServices.AccountManagement.PrincipalContext, System.String)
       at Microsoft.ServiceBus.Commands.Common.SecurityHelper.IsDomainUserValid(System.String, System.String)
       at Microsoft.ServiceBus.Commands.Common.ValidateUserAttribute.Validate(System.String)
       at Microsoft.Deployment.ConfigWizard.UICommon.AccountDetailsViewModel.ValidateDomainUser()
       at Microsoft.Deployment.ConfigWizard.UICommon.AccountDetailsControl.UserIdTextBox_LostFocus(System.Object, System.Windows.RoutedEventArgs)
       at System.Windows.EventRoute.InvokeHandlersImpl(System.Object, System.Windows.RoutedEventArgs, Boolean)
       at System.Windows.UIElement.RaiseEventImpl(System.Windows.DependencyObject, System.Windows.RoutedEventArgs)
       at System.Windows.Controls.Primitives.TextBoxBase.OnLostFocus(System.Windows.RoutedEventArgs)
       at System.Windows.UIElement.IsFocused_Changed(System.Windows.DependencyObject, System.Windows.DependencyPropertyChangedEventArgs)
       at System.Windows.DependencyObject.OnPropertyChanged(System.Windows.DependencyPropertyChangedEventArgs)
       at System.Windows.FrameworkElement.OnPropertyChanged(System.Windows.DependencyPropertyChangedEventArgs)
       at System.Windows.Controls.TextBox.OnPropertyChanged(System.Windows.DependencyPropertyChangedEventArgs)
       at System.Windows.DependencyObject.NotifyPropertyChange(System.Windows.DependencyPropertyChangedEventArgs)
       at System.Windows.DependencyObject.UpdateEffectiveValue(System.Windows.EntryIndex, System.Windows.DependencyProperty, System.Windows.PropertyMetadata, System.Windows.EffectiveValueEntry, System.Windows.EffectiveValueEntry ByRef, Boolean, Boolean,
    System.Windows.OperationType)
       at System.Windows.DependencyObject.ClearValueCommon(System.Windows.EntryIndex, System.Windows.DependencyProperty, System.Windows.PropertyMetadata)
       at System.Windows.DependencyObject.ClearValue(System.Windows.DependencyPropertyKey)
       at System.Windows.Input.FocusManager.OnFocusedElementChanged(System.Windows.DependencyObject, System.Windows.DependencyPropertyChangedEventArgs)
       at System.Windows.DependencyObject.OnPropertyChanged(System.Windows.DependencyPropertyChangedEventArgs)
       at System.Windows.FrameworkElement.OnPropertyChanged(System.Windows.DependencyPropertyChangedEventArgs)
       at System.Windows.DependencyObject.NotifyPropertyChange(System.Windows.DependencyPropertyChangedEventArgs)
       at System.Windows.DependencyObject.UpdateEffectiveValue(System.Windows.EntryIndex, System.Windows.DependencyProperty, System.Windows.PropertyMetadata, System.Windows.EffectiveValueEntry, System.Windows.EffectiveValueEntry ByRef, Boolean, Boolean,
    System.Windows.OperationType)
       at System.Windows.DependencyObject.SetValueCommon(System.Windows.DependencyProperty, System.Object, System.Windows.PropertyMetadata, Boolean, Boolean, System.Windows.OperationType, Boolean)
       at System.Windows.DependencyObject.SetValue(System.Windows.DependencyProperty, System.Object)
       at System.Windows.FrameworkElement.OnGotKeyboardFocus(System.Object, System.Windows.Input.KeyboardFocusChangedEventArgs)
       at System.Windows.RoutedEventArgs.InvokeHandler(System.Delegate, System.Object)
       at System.Windows.EventRoute.InvokeHandlersImpl(System.Object, System.Windows.RoutedEventArgs, Boolean)
       at System.Windows.UIElement.RaiseEventImpl(System.Windows.DependencyObject, System.Windows.RoutedEventArgs)
       at System.Windows.UIElement.RaiseTrustedEvent(System.Windows.RoutedEventArgs)
       at System.Windows.Input.InputManager.ProcessStagingArea()
       at System.Windows.Input.KeyboardDevice.ChangeFocus(System.Windows.DependencyObject, Int32)
       at System.Windows.Input.KeyboardDevice.Focus(System.Windows.DependencyObject, Boolean, Boolean, Boolean)
       at System.Windows.Input.KeyboardDevice.Focus(System.Windows.IInputElement)
       at System.Windows.UIElement.Focus()
       at System.Windows.Input.KeyboardNavigation.Navigate(System.Windows.DependencyObject, System.Windows.Input.TraversalRequest, System.Windows.Input.ModifierKeys, System.Windows.DependencyObject)
       at System.Windows.Input.KeyboardNavigation.Navigate(System.Windows.DependencyObject, System.Windows.Input.Key, System.Windows.Input.ModifierKeys)
       at System.Windows.Input.KeyboardNavigation.ProcessInput(System.Windows.Input.InputEventArgs)
       at System.Windows.Input.InputManager.RaiseProcessInputEventHandlers(System.Windows.Input.ProcessInputEventHandler, System.Windows.Input.ProcessInputEventArgs)
       at System.Windows.Input.InputManager.ProcessStagingArea()
       at System.Windows.Input.InputManager.ProcessInput(System.Windows.Input.InputEventArgs)
       at System.Windows.Interop.HwndKeyboardInputProvider.ReportInput(IntPtr, System.Windows.Input.InputMode, Int32, System.Windows.Input.RawKeyboardActions, Int32, Boolean, Boolean, Int32)
       at System.Windows.Interop.HwndKeyboardInputProvider.ProcessKeyAction(System.Windows.Interop.MSG ByRef, Boolean ByRef)
       at System.Windows.Interop.HwndSource.CriticalTranslateAccelerator(System.Windows.Interop.MSG ByRef, System.Windows.Input.ModifierKeys)
       at System.Windows.Interop.HwndSource.OnPreprocessMessage(System.Object)
       at System.Windows.Threading.ExceptionWrapper.InternalRealCall(System.Delegate, System.Object, Int32)
       at MS.Internal.Threading.ExceptionFilterHelper.TryCatchWhen(System.Object, System.Delegate, System.Object, Int32, System.Delegate)
       at System.Windows.Threading.Dispatcher.LegacyInvokeImpl(System.Windows.Threading.DispatcherPriority, System.TimeSpan, System.Delegate, System.Object, Int32)
       at System.Windows.Threading.Dispatcher.Invoke(System.Windows.Threading.DispatcherPriority, System.Delegate, System.Object)
       at System.Windows.Interop.HwndSource.OnPreprocessMessageThunk(System.Windows.Interop.MSG ByRef, Boolean ByRef)
       at System.Windows.Interop.ComponentDispatcherThread.RaiseThreadMessage(System.Windows.Interop.MSG ByRef)
       at System.Windows.Threading.Dispatcher.TranslateAndDispatchMessage(System.Windows.Interop.MSG ByRef)
       at System.Windows.Threading.Dispatcher.PushFrameImpl(System.Windows.Threading.DispatcherFrame)
       at System.Windows.Application.RunInternal(System.Windows.Window)
       at System.Windows.Application.Run()
       at Microsoft.Workflow.Deployment.ConfigWizard.App.Main()

    Hi Scott, 
    Thank you very much.. Now I am able to run wizard.. but at the end of wizard step I am getting below error
    [Info] [1/23/2014 5:48:47 PM]: Endpoint=sb://MSPAPPS.psu.edu.sa/WorkflowDefaultNamespace;StsEndpoint=https://MSPAPPS.psu.edu.sa:9355/WorkflowDefaultNamespace;RuntimePort=9354;ManagementPort=9355
    [Info] [1/23/2014 5:48:47 PM]: Processing completed
    [Verbose] [1/23/2014 5:48:47 PM]: Validating input and configuration parameters.
    [Verbose] [1/23/2014 5:48:49 PM]: Installing auto-generated certificate.
    [Progress] [1/23/2014 5:48:49 PM]: Installing auto-generated certificate.
    [Verbose] [1/23/2014 5:48:51 PM]: Granting 'Log on as Service' privilege to the RunAs account.
    [Progress] [1/23/2014 5:48:51 PM]: Granting 'Log on as Service' privilege to the RunAs account.
    [Verbose] [1/23/2014 5:48:52 PM]: Workflow Manager configuration starting.
    [Progress] [1/23/2014 5:48:52 PM]: Workflow Manager configuration starting.
    [Verbose] [1/23/2014 5:48:55 PM]: Configuring Workflow Manager runtime settings.
    [Progress] [1/23/2014 5:48:55 PM]: Configuring Workflow Manager runtime settings.
    [Error] [1/23/2014 5:48:55 PM]: System.Management.Automation.CmdletInvocationException: The token provider was unable to provide a security token while accessing 'https://mspapps.psu.edu.sa:9355/WorkflowDefaultNamespace/$STS/Windows/'. Token provider returned
    message: 'The underlying connection was closed: Could not establish trust relationship for the SSL/TLS secure channel.'. ---> System.UnauthorizedAccessException: The token provider was unable to provide a security token while accessing 'https://mspapps.psu.edu.sa:9355/WorkflowDefaultNamespace/$STS/Windows/'.
    Token provider returned message: 'The underlying connection was closed: Could not establish trust relationship for the SSL/TLS secure channel.'. ---> System.IdentityModel.Tokens.SecurityTokenException: The token provider was unable to provide a security
    token while accessing 'https://mspapps.psu.edu.sa:9355/WorkflowDefaultNamespace/$STS/Windows/'. Token provider returned message: 'The underlying connection was closed: Could not establish trust relationship for the SSL/TLS secure channel.'. ---> System.Net.WebException:
    The underlying connection was closed: Could not establish trust relationship for the SSL/TLS secure channel. ---> System.Security.Authentication.AuthenticationException: The remote certificate is invalid according to the validation procedure.
       at System.Net.Security.SslState.StartSendAuthResetSignal(ProtocolToken message, AsyncProtocolRequest asyncRequest, Exception exception)
       at System.Net.Security.SslState.StartSendBlob(Byte[] incoming, Int32 count, AsyncProtocolRequest asyncRequest)
       at System.Net.Security.SslState.ProcessReceivedBlob(Byte[] buffer, Int32 count, AsyncProtocolRequest asyncRequest)
       at System.Net.Security.SslState.StartReceiveBlob(Byte[] buffer, AsyncProtocolRequest asyncRequest)
       at System.Net.Security.SslState.StartSendBlob(Byte[] incoming, Int32 count, AsyncProtocolRequest asyncRequest)
       at System.Net.Security.SslState.ProcessReceivedBlob(Byte[] buffer, Int32 count, AsyncProtocolRequest asyncRequest)
       at System.Net.Security.SslState.StartReceiveBlob(Byte[] buffer, AsyncProtocolRequest asyncRequest)
       at System.Net.Security.SslState.StartSendBlob(Byte[] incoming, Int32 count, AsyncProtocolRequest asyncRequest)
       at System.Net.Security.SslState.ProcessReceivedBlob(Byte[] buffer, Int32 count, AsyncProtocolRequest asyncRequest)
       at System.Net.Security.SslState.StartReceiveBlob(Byte[] buffer, AsyncProtocolRequest asyncRequest)
       at System.Net.Security.SslState.StartSendBlob(Byte[] incoming, Int32 count, AsyncProtocolRequest asyncRequest)
       at System.Net.Security.SslState.ForceAuthentication(Boolean receiveFirst, Byte[] buffer, AsyncProtocolRequest asyncRequest)
       at System.Net.Security.SslState.ProcessAuthentication(LazyAsyncResult lazyResult)
       at System.Threading.ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
       at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
       at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
       at System.Net.TlsStream.ProcessAuthentication(LazyAsyncResult result)
       at System.Net.TlsStream.Write(Byte[] buffer, Int32 offset, Int32 size)
       at System.Net.PooledStream.Write(Byte[] buffer, Int32 offset, Int32 size)
       at System.Net.ConnectStream.WriteHeaders(Boolean async)
       --- End of inner exception stack trace ---
       at System.Net.HttpWebRequest.GetRequestStream(TransportContext& context)
       at System.Net.HttpWebRequest.GetRequestStream()
       at Microsoft.ServiceBus.TokenProviderHelper.GetWindowsAccessTokenCore(IEnumerator`1 stsUris, Func`2 uriBuilder, String requestToken, TimeSpan timeout, DateTime& expiresIn)
       --- End of inner exception stack trace ---
       at Microsoft.ServiceBus.TokenProviderHelper.ThrowException(Uri requestUri, WebException exception)
       at Microsoft.ServiceBus.TokenProviderHelper.GetWindowsAccessTokenCore(IEnumerator`1 stsUris, Func`2 uriBuilder, String requestToken, TimeSpan timeout, DateTime& expiresIn)
       at Microsoft.ServiceBus.WindowsTokenProvider.OnBeginGetWebToken(String appliesTo, String action, TimeSpan timeout, AsyncCallback callback, Object state)
       at Microsoft.ServiceBus.TokenProvider.GetWebTokenAsyncResult..ctor(TokenProvider tokenProvider, String appliesTo, String action, Boolean bypassCache, TimeSpan timeout, AsyncCallback callback, Object state)
       at Microsoft.ServiceBus.TokenProvider.BeginGetWebToken(String appliesTo, String action, Boolean bypassCache, TimeSpan timeout, AsyncCallback callback, Object state)
       at Microsoft.ServiceBus.TokenProviderUtility.GetMessagingWebToken(ITokenProvider tokenProvider, String appliesTo, String action, Boolean bypassCache, TimeSpan timeout)
       --- End of inner exception stack trace ---
    Server stack trace: 
       at Microsoft.ServiceBus.TokenProviderUtility.GetMessagingWebToken(ITokenProvider tokenProvider, String appliesTo, String action, Boolean bypassCache, TimeSpan timeout)
       at Microsoft.ServiceBus.Messaging.HttpWebRequestExtensions.AddAuthorizationHeader(HttpWebRequest request, ITokenProvider tokenProvider, Uri baseAddress, String action)
       at Microsoft.ServiceBus.Messaging.ServiceBusResourceOperations.GetAsyncResult`1.<GetAsyncSteps>d__11.MoveNext()
       at Microsoft.ServiceBus.Messaging.IteratorAsyncResult`1.EnumerateSteps(CurrentThreadType state)
       at Microsoft.ServiceBus.Messaging.IteratorAsyncResult`1.Start()
    Exception rethrown at [0]: 
       at Microsoft.ServiceBus.Common.AsyncResult.End[TAsyncResult](IAsyncResult result)
       at Microsoft.ServiceBus.NamespaceManager.OnEndTopicExists(IAsyncResult result)
       at Microsoft.ServiceBus.NamespaceManager.TopicExists(String path)
       at Microsoft.Workflow.Deployment.Commands.WorkflowServiceConfigHelper.SetWFRuntimeSettings(String resourceDBConnectionString, String config)
       at Microsoft.Workflow.Deployment.Commands.AddWFHost.CallWFRuntimeSettings(Service wfserviceInfo, String unencryptedResourceConnectionString)
       --- End of inner exception stack trace ---
       at System.Management.Automation.PowerShell.EndInvoke(IAsyncResult asyncResult)
       at Microsoft.Workflow.Deployment.ConfigWizard.CommandletHelper.InvokePowershell(Command command, Action`3 updateProgress)
       at Microsoft.Workflow.Deployment.ConfigWizard.ProgressPageViewModel.AddWFNode(FarmCreationModel model, Boolean isFirstCommand)

  • Any reference tell me why default install of Workflow manager is giving "BUILTIN\Administrators" permission?

    I installed Workflow manager for SharePoint 2013. After install completed I found the related databases (SbGatewayDatabase,
    SbManagementDB) have granted permission to "BUILTIN\Administrators". My question is why it is not granting to specific account like the farm admin or the search engine crawler? Can I change it after installation? Thank you. It is not much article
    online talk about workflow manager.

    HI Mark,Is the user name that your trying to install is already in Built-In,not necessary to change the permissions.If its not,then you can  change the account.
    Anil Avula[MCP,MCSE,MCSA,MCTS,MCITP,MCSM] See Me At: http://expertsharepoint.blogspot.de/

  • WorkFlow Manager will not install via WebPICmd

    I cannot install workflow manager via the online or offline modes.  I select the following link
    http://technet.microsoft.com/en-us/library/jj193448.aspx then the installation link and run the workflowmanager.exe and get a WPI v4.6 message "...couldn't find the product you tried
    to install"
    If I go to the download center and download the workflow Manager and then run it I get an "invalid command..." error message. 
    http://www.microsoft.com/en-us/download/details.aspx?id=35375
    I tried following the offline option using the webPICMD cmd below however that does not work... it returns "Can't find product with id WorkflowManager
    webpicmd /offline /Products:WorkflowManager /Path:c:\WorkflowManagerFiles 
    If I try
    webpicmd /offline /Products:Workflow /Path:c:\WorkflowManagerFiles  it does appear to work in that I do not get the above error message
    If I run a webpicmd /list /listoption:all  I do not see the workflow products listed
    I did then try
    WebpiCmd.exe /Install /Products:Workflow /XML:c:/WorkflowManagerFiles/feeds/latest/originalfeeds/webproductlist.xml and it says "No products to be installed (either not available or already installed)" 
    I looked at a lot of sites that talk about how to do this and I noticed that none of the links have the correct path.. they are all missing /originalfeeds part of the path.  So maybe I am missing
    something here
    I have tried this on 2 separate new Server builds  2012 and 2012 R2, both new installs, all updates applied and attached to the domain, nothing else done to the servers.  (I assume SP2013
    does not need to be installed on this Server, its just for the workflow function)
    The WorkFlow Client appears to work for both options, in that when I click on the install from the web the Web Installer has selected 1 item and I could proceed with the install
    Any ideas?

    Andrew --
    The brilliant folks over at M$ renamed it to WorkflowManagerRefresh...
    webpicmd /offline /Products:WorkflowManagerRefresh /Path:c:\WorkflowManagerFiles 

  • Installing SharePoint 2013 Workflow Manager offline - Wizard does not show up

    
    Hello guys,I recently tried to install the workflowmanager to the Application Server of my SharePoint 2013 Farm.I used the following commandline as suggested by spence harbar (in his article).SERVER -D:\SP\WorkflowManager\bin>WebpiCmd.exe /Install /Products:WorkflowManager /XML:D:\SP\WorkflowManager\feeds\latest\w
    ebproductlist.xml
    The wizard does not show up, instead of that, I got an message in my Commandbox:
    The software that you obtain using the Web Platform Installer Command Line Tool is licensed to you by its owner. Microsoft g
    rants you no rights for third party software.
    Successfully loaded primary feed: file:///D:/SP/WorkflowManager/feeds/latest/webproductlist.xml
    The following products are not available on this machine or already installed: WorkflowManager
    No products to be installed (either not available or already installed)
    Can anybody tell me what to do in this situation. I can´t uninstall the software because there is none.
    I need help with this! There is no information in the community about this problem :/
    Greetings Andre

    Hi,
    First of all that blog is old and now you should install Workflow Manager Refresh 1.0. To start fresh, uninstall all components of WF Manager from the server and then follow below mentioned steps.
    Download Microsoft Web Platform Installer 5.0 on a machine where Internet is there.
    Once Installed, go this path in command prompt C:\Program Files\Microsoft\Web Platform Installer and then use this command WebpiCmd.exe /offline /Products:WorkflowManagerRefresh /Path:C:\temp
    Copy the temp folder to the WF Manager machine where you wish to install the WF Manager
    In destination server, use command prompt with elevated privileges and navigate to the temp/bin directory (in copied folder).
    Use this command WebpiCmd.exe /Install /Products:ServiceBus_1_1 /XML:C:\temp\feeds\latest\webproductlist.xml
    Then run this command WebpiCmd.exe /Install /Products:WorkflowClient /XML:C:\temp\feeds\latest\webproductlist.xml
    Then run this command WebpiCmd.exe /Install /Products:WorkflowManagerRefresh /XML:C:\temp\feeds\latest\webproductlist.xml
    -Prashant

Maybe you are looking for

  • Problem with Copy and Paste in Edit

    Today i cannot get Copy and Paste to operate. After highlighting a link in blue I cannot get the Copy to register. The link stays blue and does not respond to Copy click. I send links on Yahoo IM to friends of sites or Youtube videos. Thanx for the g

  • Can I stop and deflate show before it stops downloading?

    Can I stop and deflate show before it stops downloading?

  • Place snippet script

    Hi all, I am working on a script that is asking InDesign to place a snippet into the slug of whatever document is created. The problem is I don't seem to have control over the placement coordinates of the snippet: it always place it at exact same coo

  • Rain custom objects in AE CS5

    I'd like to make multiple copies of a .jpg I've made rain down from the top of the screen, ad-infinitum. Like, imagine small cat's heads raining down from the top of the screen. I have foggy memories of an effect where I can just replace the default

  • Lightroom 6 won't import video

    While my Lightroom 5.7 works just dandy, I'm having all kinds of problems with Lightroom CC and 6.   I seem to have moved beyond most of the freezing and crashing that is happening upon startup now with Adobe suggested solutions, but I simply can't i