Trouble installing 9i database
Yesterday I was installing the 9i software that I downloaded, and we had a power failure about halfway through the installation.
This morning I've been trying to reinstall the software, but I keep getting errors that say that the OracleMTSRecoveryService is running and needs to be stopped before I can continue, but it doesn't given any information about the file or how I can do this.
I've tried running the uninstall programs feature with my Windows XP, but no Oracle software is showing. I also tried to deinstall Oracle through the Oracle installer, but apparently not enough of the program was installed for it to recognize any software being installed in the first place.
I've tried to get past this installation error by hitting "cancel" and then saying to skip this component, but the installation keeps on locking up on me.
Any ideas?
Thanks,
Brian
Hi,
From control panel, select administrative tools and then select services. Check is there any oracle service running, if so, then stop it.
As your installation failed earlier, if possible, remove oracle services and oracle from regedit, and in the program files folder delete oracle folder(if any).
start your frest installation. Hope it will work.
Similar Messages
-
(Solved) Having trouble installing vlc and openoffice
I am having trouble installing both VLC and Openoffice.
VLC
I tried typing in:
yaourt -S vlc
At first, it finds the package, and the first time I did it, downloaded quite a bit of stuff, and then it failed after installing a rather large package and then says :
error: failed retreiving file 'vlc-0.9.9a-6-i686.pkg.tar.bz' from archlinux.unix.heads.org : Not Found
Any idea what may be causing this?
OpenOffice
I tried typing in:
yaourt -S openoffice
Then it said it could not find openoffice in my /etc/customizepkg.d and then asks me to change my PKGBUILD and I had no idea what to edit in it.
Then, it tried to install it, and it tells me svn is not found in AUR.
What does this mean and how can I get openoffice?
Last edited by iscalio (2009-07-09 08:26:02)You need to use the -y flag to update your local repository list.
Ie pacman -Sy
You can conveniently combine all of your tasks..
pacman -Sy vlc openoffice-base
Error retrieving a file means either
A) The mirror you are using is updating itself and you were unlucky enough to sync right when it was doing so.. youll need to wait a little while and try -Sy again then..
B) Related to A.. your database could be either older or newer than the mirror you are using. If you switched mirrors recently, this happens sometimes. Most mirrors update ~daily, but some update ~weekly. -Sy to sync.. you could try -Syy to force a full sync so that even lists of supposedly up-to-date repositories (core,extra,so forth) are synced (doing so is only good/useful if you have problems)..
C) Your mirror is offline.. change it to another one in /etc/pacman.d/mirrorlist
D) Your internet is not running / your DNS is not working properly.. try to ping a site you know is online to be sure. Google is always a good choice. ping www.google.com. You can ctrl+c to end it if it responds as expected. Fix your internet (see the wiki) and domain name server (/etc/resolv.conf and your router) if you have problems.
You may or may not also wish to pacman -Scc in order to clean out your cache of saved packages in case there is a download problem.
Your post gives the impression you don't understand pacman vs yaourt.. apologies if i'm wrong, but just in case:
Pacman is used for official binary repository files. Yaourt can do pacman's job in addition to its own with the same syntax (imo it does a pretty slow and lousy job of such though), but it's real original function is primarily to install 3rd party / community packages that the Arch devs either can't or won't maintain (and most often, have not "ok"ed them as safe to install). You should look at yaourt in the wiki.. when it asks you to change the pkgbuild I imagine you mean when it says 'what do you want to edit it with?'.. which you dont need to edit it at all. The reason it asks you is because yaourt can install stuff from AUR, which like I said is 3rd party / community stuff that can contain something malicious (AUR is open to submissions, unlike the official repositories) and you are highly advised to look it over for something fishy before compiling and installing. FYI -- believe me, you don't want to compile openoffice without reaaally good reason on a really fast machine. It hurts. Your machine will be as usable as a doorstop for a very long time while it's doing it's business. Just save your time and patience, install the compiled binary via pacman instead.
Please use the wiki, forum search functions, and man pages. Most of the Arch community is friendly and knowledgeable, but people get (rightly) irked when their work maintaining the aforementioned to answer queries like this one are ignored.
Last edited by FrozenFox (2009-07-09 03:26:02) -
Trouble installing the apps after downloading Adobe Creative Cloud
I am having trouble installing the apps after downloading Adobe Creative Cloud. The following Error messages show up:
ERROR: Third party payload installer vcredist_x64.exe failed with exit code: 2147942750
ERROR: Failed to repair Microsoft Visual C++ 2012 Redistributable Package (x64). Please try repairing it by double clicking on the executable at "C:\Users\KATHER~1.CDA\AppData\Local\Temp\{63EDD438-B4D0-424C-B05A-7990C09D955C}\Illustra tor_1Third party payload installer vcredist_x64.exe failed with exit code: 2147942750
-
I am having trouble installing Adobe Creative Cloud on my windows 7 laptop
I am having trouble installing Adobe Creative Cloud on my Windows 7 laptop; i keep getting an error message
this is what I get
-- Payload: Acrobat Professional 11.0.0.0 {23D3F585-AE29-4670-8E3E-64A0EFB29240} ----------- ERROR: Error 1316.A network error occurred while attempting to read from the file C:\Windows\Installer\AcroStan.msi ERROR: Install MSI payload failed with error: 1603 - Fatal error during installation. MSI Error message: Error 1316.A network error occurred while attempting to read from the file C:\Windows\Installer\AcroStan.msi ERROR: Third party payload installer AcroPro.msi failed with exit code: 1603http://helpx.adobe.com/creative-suite/kb/error-1603-fatal-error-occurred-1.html
http://helpx.adobe.com/creative-suite/kb/errors-exit-code-6-exit.html
Mylenium -
Cannot execute Install for database ORACLE_HOME
Dear ALl,
EBS 11.5.9 with Windows 2003, during multi-node installation error.
log file
Oracle Applications Rapid Install Wizard Install log
>> Using Rapid Wizard Version : 11.5.9.21
>> Install session started : Fri Jul 25 17:41:05 GST 2008
>> Rapid Wizard source location : D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz
>> Command Line arguments for this execution :
=================================================================
Install Session Information
Host Name : sysd.apps.com
Host Operating System : Windows 2000
User running Install : applmgr
=================================================================
InstUpgPanel - User chooses to Install Oracle Applications
NumNodesPanel - Multi-node Selected
SIDSeedPanel - The PROD database is set to PROD fresh install database
ProductPanel - The following are the selected Product Groups for instance PROD
Basic
E-Business Intelligence
Marketing
TeleSales
Field Sales
Order Management
Inventory Management
Purchasing
Discrete Manufacturing
Process Manufacturing
TeleService
Service Contracts
Project Costing
Project Billing
Financials
Human Resources
ProductPanel - The following are the selected Product for instance PROD
0
160
190
265
601
174
175
690
874
709
454
452
450
558
451
530
517
520
549
670
691
882
521
676
880
696
697
660
522
544
869
676
279
697
660
702
401
665
673
401
665
201
202
250
401
702
703
704
705
706
712
550
551
552
553
554
555
556
557
514
511
542
862
696
872
170
866
518
515
510
870
524
542
275
275
101
140
200
222
240
260
600
8400
8401
8450
8901
231
673
800
804
8301
8302
TerritoryPanel - The following are the selected settings for instance PROD
LanguagePanel - The following are the selections from the Language Panel:
US - American_English
US - American_English
US7ASCII
US7ASCII
AMERICA
MultiNodePanel - Selected nodes:
[Ljava.lang.String;@eddac
[Ljava.lang.String;@7b7565
[[Z@583cf4
QuickPanel - Empty Fields were encountered. Number of empty Fields:1
QuickPanel - The following are the selected top directories for instance PROD
e:\oracle e:\oracle e:\oracle f:\oracle f:\oracle f:\oracle applmgr password apps.com
QuickPanel - The following are the selected top directories for instance PROD
e:\oracle e:\oracle e:\oracle f:\oracle f:\oracle f:\oracle applmgr password apps.com
MountsPanel - The following are the mount points selected by the user for instance PROD
e:\oracle\prodappl
e:\oracle\prodappl
e:\oracle\prodappl
e:\oracle\prodappl
US7ASCII
US-ASCII
e:\oracle\prodcomn
e:\oracle\proddb\9.2.0
e:\oracle\prodora\8.0.6
e:\oracle\prodora\iAS
f:\oracle\proddata
f:\oracle\proddata
f:\oracle\proddata
f:\oracle\proddata
e:\oracle\prodcomn\java
e:\oracle\prodcomn\portal
e:\oracle\prodcomn\util\jre\1.1.8
e:\oracle\prodcomn\temp
applmgr
password
apps.com
C:\mksnt
C:\VC98
C:\java\jdk1.3.1
c:\Program Files\Oracle\Inventory
MountsPanel - The following are the mount points selected by the user for instance PROD
e:\oracle\prodappl
e:\oracle\prodappl
e:\oracle\prodappl
e:\oracle\prodappl
US7ASCII
US-ASCII
e:\oracle\prodcomn
e:\oracle\proddb\9.2.0
e:\oracle\prodora\8.0.6
e:\oracle\prodora\iAS
f:\oracle\proddata
f:\oracle\proddata
f:\oracle\proddata
f:\oracle\proddata
e:\oracle\prodcomn\java
e:\oracle\prodcomn\portal
e:\oracle\prodcomn\util\jre\1.1.8
e:\oracle\prodcomn\temp
applmgr
password
apps.com
C:\mksnt
C:\VC98
C:\java\jdk1.3.1
c:\Program Files\Oracle\Inventory
MountsPanel - The following are the mount points selected by the user for instance PROD
e:\oracle\prodappl
e:\oracle\prodappl
e:\oracle\prodappl
e:\oracle\prodappl
US7ASCII
US-ASCII
e:\oracle\prodcomn
e:\oracle\proddb\9.2.0
e:\oracle\prodora\8.0.6
e:\oracle\prodora\iAS
f:\oracle\proddata
f:\oracle\proddata
f:\oracle\proddata
f:\oracle\proddata
e:\oracle\prodcomn\java
e:\oracle\prodcomn\portal
e:\oracle\prodcomn\util\jre\1.1.8
e:\oracle\prodcomn\temp
applmgr
password
apps.com
d:\MKS\mksnt
d:\VC98
C:\jdk1.3.1_06
c:\Program Files\Oracle\Inventory
MountsPanel - The following are the mount points selected by the user for instance PROD
e:\oracle\prodappl
e:\oracle\prodappl
e:\oracle\prodappl
e:\oracle\prodappl
US7ASCII
US-ASCII
e:\oracle\prodcomn
e:\oracle\proddb\9.2.0
e:\oracle\prodora\8.0.6
e:\oracle\prodora\iAS
f:\oracle\proddata
f:\oracle\proddata
f:\oracle\proddata
f:\oracle\proddata
e:\oracle\prodcomn\java
e:\oracle\prodcomn\portal
e:\oracle\prodcomn\util\jre\1.1.8
e:\oracle\prodcomn\temp
applmgr
password
apps.com
d:\MKS\mksnt
d:\VC98
C:\jdk1.3.1_06
c:\Program Files\Oracle\Inventory
SettingsPanel - The following are the selected settings for instance PROD
PROD
PROD
US7ASCII
AMERICA
1521
1626
7000
8000
8100
8200
8800
9000
9100
9200
9300
9800
10000
10100
10200
10300
16000-16009
17000-17009
18000-18019
19000-19009
AppsConfig temp dir set to: C:\DOCUME~1\applmgr\LOCALS~1\Temp
ConfigFilePanel - Setting temp directory to: C:\DOCUME~1\applmgr\LOCALS~1\Temp <-> C:\DOCUME~1\applmgr\LOCALS~1\Temp\
ConfigFilePanel - Writing configuration file to: C:\DOCUME~1\applmgr\LOCALS~1\Temp\config.txt
Port Availability Check :
Database Port Value = 1521...... Available
Operating System Check
command : cmd.exe /c D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\bin\checkOS.cmd
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>echo off
ALLUSERSPROFILE=C:\Documents and Settings\All Users
APPDATA=C:\Documents and Settings\applmgr\Application Data
ClusterLog=C:\WINDOWS\Cluster\cluster.log
CommonProgramFiles=C:\Program Files\Common Files
COMPUTERNAME=SYSD
ComSpec=C:\WINDOWS\system32\cmd.exe
DISPLAY=:0.0
HOME=C:\Documents and Settings\applmgr
HOMEDRIVE=C:
HOMEPATH=\Documents and Settings\applmgr
include=D:\VC98\atl\include;D:\VC98\mfc\include;D:\VC98\include
lib=D:\VC98\mfc\lib;D:\VC98\lib
LOGONSERVER=\\SYSD
MSDevDir=D:\VC98\MSDev98
NUMBER_OF_PROCESSORS=16
NUTCROOT=D:\MKS
OS=Windows_NT
Path=C:\Perl\bin;D:\MKS\bin;D:\MKS\bin\x11;D:\MKS\mksnt;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;D:\VC98\Tools\WinNT;D:\VC98\MSDev98\Bin;D:\VC98\Tools;D:\VC98\bin
PATHEXT=.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH
PROCESSOR_ARCHITECTURE=x86
PROCESSOR_IDENTIFIER=x86 Family 6 Model 15 Stepping 11, GenuineIntel
PROCESSOR_LEVEL=6
PROCESSOR_REVISION=0f0b
ProgramFiles=C:\Program Files
PROMPT=$P$G
ROOTDIR=D:\MKS
SESSIONNAME=Console
SHELL=D:\MKS\mksnt\sh.exe
SystemDrive=C:
SystemRoot=C:\WINDOWS
TEMP=C:\DOCUME~1\applmgr\LOCALS~1\Temp
TERM=nutc
TERMCAP=D:\MKS\etc\termcap
TERMINFO=D:\MKS\usr\lib\terminfo
TMP=C:\DOCUME~1\applmgr\LOCALS~1\Temp
TMPDIR=C:\DOCUME~1\applmgr\LOCALS~1\Temp
USERDOMAIN=SYSD
USERNAME=applmgr
USERPROFILE=C:\Documents and Settings\applmgr
windir=C:\WINDOWS
Operating System patch/version test has suceeded
Port Uniqueness Check :
All ports are unique.
File System Check :
Database ORACLE_HOME created:
Mount Point = e:\oracle\proddb\9.2.0
Database ORACLE_HOME admin folder created:
Mount Point = e:\oracle\proddb\9.2.0\appsutil
Database ORACLE_HOME temp folder created:
Mount Point = e:\oracle\proddb\9.2.0\appsutil\temp
Database Install Log Directory created:
Mount Point = e:\oracle\proddb\9.2.0\appsutil\log\PROD_sysd
Database System File Directory created:
Mount Point = f:\oracle\proddata
Database Log File Directory available:
Mount Point = f:\oracle\proddata
Database Data File Directory available:
Mount Point = f:\oracle\proddata
Database Index File Directory available:
Mount Point = f:\oracle\proddata
File Space Check :
Disk space on system acceptable :
Database ORACLE_HOME = e:\oracle\proddb\9.2.0
required = 2381.0
actual = 102323.203125
Disk space on system acceptable :
Database System File Directory = f:\oracle\proddata
required = 9259.0
actual = 457021.93359375
Disk space on system acceptable :
Database Log File Directory = f:\oracle\proddata
required = 49.0
actual = 447762.93359375
Disk space on system acceptable :
Database Data File Directory = f:\oracle\proddata
required = 8175.0
actual = 447713.93359375
Disk space on system acceptable :
Database Index File Directory = f:\oracle\proddata
required = 6532.0
actual = 439538.93359375
Host/Domain Check :
command : ping -n 1 sysd
Pinging sysd [192.168.6.16] with 32 bytes of data:
Reply from 192.168.6.16: bytes=32 time<1ms TTL=128
Ping statistics for 192.168.6.16:
Packets: Sent = 1, Received = 1, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 0ms, Maximum = 0ms, Average = 0ms
host ping has suceeded
command : ping -n 1 sysd.apps.com
Pinging sysd.apps.com [192.168.6.16] with 32 bytes of data:
Reply from 192.168.6.16: bytes=32 time<1ms TTL=128
Ping statistics for 192.168.6.16:
Packets: Sent = 1, Received = 1, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 0ms, Maximum = 0ms, Average = 0ms
host.domain ping has suceeded
command : ping -n 1 sysm
Pinging sysm [192.168.6.17] with 32 bytes of data:
Reply from 192.168.6.17: bytes=32 time<1ms TTL=128
Ping statistics for 192.168.6.17:
Packets: Sent = 1, Received = 1, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 0ms, Maximum = 0ms, Average = 0ms
host ping has suceeded
command : ping -n 1 sysm.apps.com
Ping request could not find host sysm.apps.com. Please check the name and try again.
Error - host.domain ping has returned an error: 1
System variable PATH set to:
C:\Perl\bin;D:\MKS\bin;D:\MKS\bin\x11;D:\MKS\mksnt;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;D:\VC98\Tools\WinNT;D:\VC98\MSDev98\Bin;D:\VC98\Tools;D:\VC98\bin
System Utilities Check :
command : cmd.exe /c D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\bin\checkutil.cmd d:\MKS\mksnt d:\VC98
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>echo off
Setting environment for using Microsoft Visual C++ tools.
C:\WINDOWS\system32/cmd.exe
'which' command is available.
C:\WINDOWS\system32/gnumake.exe
'gnumake' is available.
d:\MKS\mksnt/cc.exe
'cc' is available.
D:\VC98\BIN/link.exe
'link' is available.
ERRORCODE = 0 ERRORCODE_END
System Utilities Availability test has suceeded
JDK Availability Check :
running command : CheckerClass.JDKCheck()
JDK Availability Test has succeeded , Version Detected is java version "1.3.1_06"
QuickPanel - The following are the selected top directories for instance PROD
e:\oracle e:\oracle e:\oracle f:\oracle f:\oracle f:\oracle applmgr password apps.com
QuickPanel - The following are the selected top directories for instance PROD
e:\oracle e:\oracle e:\oracle f:\oracle f:\oracle f:\oracle applmgr password appsa.com
MountsPanel - The following are the mount points selected by the user for instance PROD
e:\oracle\prodappl
e:\oracle\prodappl
e:\oracle\prodappl
e:\oracle\prodappl
US7ASCII
US-ASCII
e:\oracle\prodcomn
e:\oracle\proddb\9.2.0
e:\oracle\prodora\8.0.6
e:\oracle\prodora\iAS
f:\oracle\proddata
f:\oracle\proddata
f:\oracle\proddata
f:\oracle\proddata
e:\oracle\prodcomn\java
e:\oracle\prodcomn\portal
e:\oracle\prodcomn\util\jre\1.1.8
e:\oracle\prodcomn\temp
applmgr
password
apps.com
d:\MKS\mksnt
d:\VC98
C:\jdk1.3.1_06
c:\Program Files\Oracle\Inventory
MountsPanel - The following are the mount points selected by the user for instance PROD
e:\oracle\prodappl
e:\oracle\prodappl
e:\oracle\prodappl
e:\oracle\prodappl
US7ASCII
US-ASCII
e:\oracle\prodcomn
e:\oracle\proddb\9.2.0
e:\oracle\prodora\8.0.6
e:\oracle\prodora\iAS
f:\oracle\proddata
f:\oracle\proddata
f:\oracle\proddata
f:\oracle\proddata
e:\oracle\prodcomn\java
e:\oracle\prodcomn\portal
e:\oracle\prodcomn\util\jre\1.1.8
e:\oracle\prodcomn\temp
applmgr
password
appsa.com
d:\MKS\mksnt
d:\VC98
C:\jdk1.3.1_06
c:\Program Files\Oracle\Inventory
SettingsPanel - The following are the selected settings for instance PROD
PROD
PROD
US7ASCII
AMERICA
1521
1626
7000
8000
8100
8200
8800
9000
9100
9200
9300
9800
10000
10100
10200
10300
16000-16009
17000-17009
18000-18019
19000-19009
AppsConfig temp dir set to: C:\DOCUME~1\applmgr\LOCALS~1\Temp
ConfigFilePanel - Setting temp directory to: C:\DOCUME~1\applmgr\LOCALS~1\Temp <-> C:\DOCUME~1\applmgr\LOCALS~1\Temp\
ConfigFilePanel - Writing configuration file to: C:\DOCUME~1\applmgr\LOCALS~1\Temp\config.txt
Port Availability Check :
Database Port Value = 1521...... Available
Operating System Check
command : cmd.exe /c D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\bin\checkOS.cmd
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>echo off
ALLUSERSPROFILE=C:\Documents and Settings\All Users
APPDATA=C:\Documents and Settings\applmgr\Application Data
ClusterLog=C:\WINDOWS\Cluster\cluster.log
CommonProgramFiles=C:\Program Files\Common Files
COMPUTERNAME=SYSD
ComSpec=C:\WINDOWS\system32\cmd.exe
DISPLAY=:0.0
HOME=C:\Documents and Settings\applmgr
HOMEDRIVE=C:
HOMEPATH=\Documents and Settings\applmgr
include=D:\VC98\atl\include;D:\VC98\mfc\include;D:\VC98\include
lib=D:\VC98\mfc\lib;D:\VC98\lib
LOGONSERVER=\\SYSD
MSDevDir=D:\VC98\MSDev98
NUMBER_OF_PROCESSORS=16
NUTCROOT=D:\MKS
OS=Windows_NT
Path=C:\Perl\bin;D:\MKS\bin;D:\MKS\bin\x11;D:\MKS\mksnt;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;D:\VC98\Tools\WinNT;D:\VC98\MSDev98\Bin;D:\VC98\Tools;D:\VC98\bin
PATHEXT=.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH
PROCESSOR_ARCHITECTURE=x86
PROCESSOR_IDENTIFIER=x86 Family 6 Model 15 Stepping 11, GenuineIntel
PROCESSOR_LEVEL=6
PROCESSOR_REVISION=0f0b
ProgramFiles=C:\Program Files
PROMPT=$P$G
ROOTDIR=D:\MKS
SESSIONNAME=Console
SHELL=D:\MKS\mksnt\sh.exe
SystemDrive=C:
SystemRoot=C:\WINDOWS
TEMP=C:\DOCUME~1\applmgr\LOCALS~1\Temp
TERM=nutc
TERMCAP=D:\MKS\etc\termcap
TERMINFO=D:\MKS\usr\lib\terminfo
TMP=C:\DOCUME~1\applmgr\LOCALS~1\Temp
TMPDIR=C:\DOCUME~1\applmgr\LOCALS~1\Temp
USERDOMAIN=SYSD
USERNAME=applmgr
USERPROFILE=C:\Documents and Settings\applmgr
windir=C:\WINDOWS
Operating System patch/version test has suceeded
Port Uniqueness Check :
All ports are unique.
File System Check :
Database ORACLE_HOME available:
Mount Point = e:\oracle\proddb\9.2.0
Database ORACLE_HOME admin folder available:
Mount Point = e:\oracle\proddb\9.2.0\appsutil
Database ORACLE_HOME temp folder available:
Mount Point = e:\oracle\proddb\9.2.0\appsutil\temp
Database Install Log Directory available:
Mount Point = e:\oracle\proddb\9.2.0\appsutil\log\PROD_sysd
Database System File Directory available:
Mount Point = f:\oracle\proddata
Database Log File Directory available:
Mount Point = f:\oracle\proddata
Database Data File Directory available:
Mount Point = f:\oracle\proddata
Database Index File Directory available:
Mount Point = f:\oracle\proddata
File Space Check :
Disk space on system acceptable :
Database ORACLE_HOME = e:\oracle\proddb\9.2.0
required = 2381.0
actual = 102323.203125
Disk space on system acceptable :
Database System File Directory = f:\oracle\proddata
required = 9259.0
actual = 457021.93359375
Disk space on system acceptable :
Database Log File Directory = f:\oracle\proddata
required = 49.0
actual = 447762.93359375
Disk space on system acceptable :
Database Data File Directory = f:\oracle\proddata
required = 8175.0
actual = 447713.93359375
Disk space on system acceptable :
Database Index File Directory = f:\oracle\proddata
required = 6532.0
actual = 439538.93359375
Host/Domain Check :
command : ping -n 1 sysd
Pinging sysd [192.168.6.16] with 32 bytes of data:
Reply from 192.168.6.16: bytes=32 time<1ms TTL=128
Ping statistics for 192.168.6.16:
Packets: Sent = 1, Received = 1, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 0ms, Maximum = 0ms, Average = 0ms
host ping has suceeded
command : ping -n 1 sysd.apps.com
Pinging sysd.apps.com [192.168.6.16] with 32 bytes of data:
Reply from 192.168.6.16: bytes=32 time<1ms TTL=128
Ping statistics for 192.168.6.16:
Packets: Sent = 1, Received = 1, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 0ms, Maximum = 0ms, Average = 0ms
host.domain ping has suceeded
command : ping -n 1 sysm
Pinging sysm [192.168.6.17] with 32 bytes of data:
Reply from 192.168.6.17: bytes=32 time<1ms TTL=128
Ping statistics for 192.168.6.17:
Packets: Sent = 1, Received = 1, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 0ms, Maximum = 0ms, Average = 0ms
host ping has suceeded
command : ping -n 1 sysm.appsa.com
Pinging sysm.appsa.com [208.87.33.150] with 32 bytes of data:
Reply from 208.87.33.150: bytes=32 time=295ms TTL=48
Ping statistics for 208.87.33.150:
Packets: Sent = 1, Received = 1, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 295ms, Maximum = 295ms, Average = 295ms
host.domain ping has suceeded
System Utilities Check :
command : cmd.exe /c D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\bin\checkutil.cmd d:\MKS\mksnt d:\VC98
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>echo off
Setting environment for using Microsoft Visual C++ tools.
C:\WINDOWS\system32/cmd.exe
'which' command is available.
C:\WINDOWS\system32/gnumake.exe
'gnumake' is available.
d:\MKS\mksnt/cc.exe
'cc' is available.
D:\VC98\BIN/link.exe
'link' is available.
ERRORCODE = 0 ERRORCODE_END
System Utilities Availability test has suceeded
JDK Availability Check :
running command : CheckerClass.JDKCheck()
JDK Availability Test has succeeded , Version Detected is java version "1.3.1_06"
DoInstallPanel - Summary Text
The Rapid Install Wizard will now install the following:
Install Oracle 9i technology stack for PROD.
Install Oracle Applications Database Seed for PROD.
DoInstallPanel - User continued install at warning dialog.
DoInstallPanel - Beginning install for all users.
Starting from Rapid Install Full Stage area D:\Stage_area_11.5.9\oraDB\Disk1
RapidWiz location: D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz
Install Media location: D:\Stage_area_11.5.9\startCD\Disk1
APPL_TOP location: e:\oracle\prodappl
Database ORACLE_HOME: e:\oracle\proddb\9.2.0
Database SID: PROD
Database Context Name : PROD_sysd
Creating 9.2.0 DB Context from D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\etc\adxdbctx.tmp to e:\oracle\proddb\9.2.0\appsutil\PROD_sysd.xml
instantiate file:
source : D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\etc\adxdbctx.tmp
dest : e:\oracle\proddb\9.2.0\appsutil\PROD_sysd.xml
instantiate file:
source : e:\oracle\proddb\9.2.0\appsutil\PROD_sysd.xml
dest : e:\oracle\proddb\9.2.0\appsutil\PROD_sysd.xml
instantiate file:
source : e:\oracle\proddb\9.2.0\appsutil\PROD_sysd.xml
dest : e:\oracle\proddb\9.2.0\appsutil\PROD_sysd.xml
Processing DriverFile = D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\template\adridb.drv
Running Instantiation Drivers for D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\template\adridb.drv
Total number of processes in Current Install 3
Processing DriverFile = D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\template\adridb.drv
Running Instantiation Drivers for D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\template\adridb.drv
Invalid target file name in driver file: <s_com>\admin\out
Creation of Directory - E:\oracle\proddb\9.2.0\temp\PROD_sysd Succeeded.
instantiate file:
source : D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\template\adrun8i.cmd
dest : e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrun8i.cmd
backup : e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrun8i.cmd to C:\DOCUME~1\applmgr\LOCALS~1\Temp\templbac\adrun8i.cmd
instantiate file:
source : D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\template\adrun9i.cmd
dest : e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrun9i.cmd
backup : e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrun9i.cmd to C:\DOCUME~1\applmgr\LOCALS~1\Temp\templbac\adrun9i.cmd
instantiate file:
source : D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\template\adrundb.cmd
dest : e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrundb.cmd
backup : e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrundb.cmd to C:\DOCUME~1\applmgr\LOCALS~1\Temp\templbac\adrundb.cmd
Step 0 of 3
Command: e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrun8i.cmd
Processing Step 1 of 3
Executing: e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrun8i.cmd APPS APPS
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM $Header: adrun8i.cmd 115.24 2003/07/17 00:44:02 psaddi ship $
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM ###############################################################
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM This file is automatically generated by AutoConfig. It will be read and overwritten.
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM If you were instructed to edit this file, or if you are not able to use the settings
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM created by AutoConfig, refer to Metalink document 165195.1 for assistance.
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM ###############################################################
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>FOR /F "delims==" %a IN ('DATE /T') DO (set date=%a )
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>(set date=Fri 07/25/2008 )
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>FOR /F "delims==" %a IN ('TIME /T') DO (set time=%a )
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>(set time=05:49 PM )
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM Print out the program name and start time
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>ECHO STARTED INSTALL PHASE : 8I RDBMS : Fri 07/25/2008 05:49 PM
STARTED INSTALL PHASE : 8I RDBMS : Fri 07/25/2008 05:49 PM
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>SET JRE_PATH=D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jre\NT\1.3.1\bin\java
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>SET JRE_CP=.;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\RapidWiz.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jre\NT\1.3.1\lib\rt.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jre\NT\1.3.1\lib\i18n.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\ewt-3_4_9.zip;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\swingall-1_1_1.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\share-1_1_11.zip;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\jnls.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\acc.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\help-3_1_8.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\oracle_ice-4_06_6.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\netcfg.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\xmlparserv2.zip;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\adconfig.zip
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>SET ENV_FILE=e:\oracle\proddb\9.2.0\appsutil\PROD_sysd.xml
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>SET PATH=D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\unzip\NT;C:\Perl\bin;D:\MKS\bin;D:\MKS\bin\x11;D:\MKS\mksnt;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;D:\VC98\Tools\WinNT;D:\VC98\MSDev98\Bin;D:\VC98\Tools;D:\VC98\bin
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>SET EC=ERRORCODE
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>IF "5" == "1" (SET THREADS=1 ) ELSE (SET THREADS=16 )
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>CD /D C:\DOCUME~1\applmgr\LOCALS~1\Temp
C:\DOCUME~1\applmgr\LOCALS~1\Temp>REM
C:\DOCUME~1\applmgr\LOCALS~1\Temp>REM Install 8i will only happen, if database is "db817"
C:\DOCUME~1\applmgr\LOCALS~1\Temp>REM
C:\DOCUME~1\applmgr\LOCALS~1\Temp>if "db920" == "db817" goto :INSTALL_DB
C:\DOCUME~1\applmgr\LOCALS~1\Temp>goto :SCRIPTEND
C:\DOCUME~1\applmgr\LOCALS~1\Temp>FOR /F "delims==" %a IN ('DATE /T') DO (set date=%a )
C:\DOCUME~1\applmgr\LOCALS~1\Temp>(set date=Fri 07/25/2008 )
C:\DOCUME~1\applmgr\LOCALS~1\Temp>FOR /F "delims==" %a IN ('TIME /T') DO (set time=%a )
C:\DOCUME~1\applmgr\LOCALS~1\Temp>(set time=05:49 PM )
C:\DOCUME~1\applmgr\LOCALS~1\Temp>ECHO FINISHED INSTALL PHASE : 8I RDBMS : Fri 07/25/2008 05:49 PM
FINISHED INSTALL PHASE : 8I RDBMS : Fri 07/25/2008 05:49 PM
C:\DOCUME~1\applmgr\LOCALS~1\Temp>echo "Database ORACLE_HOME installation succeeded"
"Database ORACLE_HOME installation succeeded"
e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrun8i.cmd APPS APPS has suceeded
Step 1 of 3
Command: e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrun9i.cmd
Processing Step 2 of 3
Executing: e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrun9i.cmd APPS APPS
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM $Header: adrun9i.cmd 115.19 2003/07/17 00:44:06 psaddi ship $
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM ###############################################################
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM This file is automatically generated by AutoConfig. It will be read and overwritten.
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM If you were instructed to edit this file, or if you are not able to use the settings
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM created by AutoConfig, refer to Metalink document 165195.1 for assistance.
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM ###############################################################
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>FOR /F "delims==" %a IN ('DATE /T') DO (set date=%a )
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>(set date=Fri 07/25/2008 )
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>FOR /F "delims==" %a IN ('TIME /T') DO (set time=%a )
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>(set time=05:49 PM )
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>ECHO STARTED INSTALL PHASE : 9I RDBMS : Fri 07/25/2008 05:49 PM
STARTED INSTALL PHASE : 9I RDBMS : Fri 07/25/2008 05:49 PM
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>SET JRE_PATH=D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jre\NT\1.3.1\bin\java
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>SET JRE_CP=.;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\RapidWiz.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jre\NT\1.3.1\lib\rt.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jre\NT\1.3.1\lib\i18n.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\ewt-3_4_9.zip;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\swingall-1_1_1.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\share-1_1_11.zip;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\jnls.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\acc.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\help-3_1_8.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\oracle_ice-4_06_6.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\netcfg.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\xmlparserv2.zip;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\adconfig.zip
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>SET ENV_FILE=e:\oracle\proddb\9.2.0\appsutil\PROD_sysd.xml
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>SET PATH=D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\unzip\NT;C:\Perl\bin;D:\MKS\bin;D:\MKS\bin\x11;D:\MKS\mksnt;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;D:\VC98\Tools\WinNT;D:\VC98\MSDev98\Bin;D:\VC98\Tools;D:\VC98\bin
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>SET EC=ERRORCODE
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>IF "5" == "1" (SET THREADS=1 ) ELSE (SET THREADS=16 )
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>CD /D C:\DOCUME~1\applmgr\LOCALS~1\Temp
C:\DOCUME~1\applmgr\LOCALS~1\Temp>REM
C:\DOCUME~1\applmgr\LOCALS~1\Temp>REM Install 9i will only happen, if database is "db920"
C:\DOCUME~1\applmgr\LOCALS~1\Temp>REM
C:\DOCUME~1\applmgr\LOCALS~1\Temp>if "db920" == "db920" goto :INSTALL_DB
C:\DOCUME~1\applmgr\LOCALS~1\Temp>REM Installing 9i RDBMS
C:\DOCUME~1\applmgr\LOCALS~1\Temp>REM
C:\DOCUME~1\applmgr\LOCALS~1\Temp>REM Setting the driver file name
C:\DOCUME~1\applmgr\LOCALS~1\Temp>REM
C:\DOCUME~1\applmgr\LOCALS~1\Temp>SET DRVNAME=gdb920.drv
C:\DOCUME~1\applmgr\LOCALS~1\Temp>REM
C:\DOCUME~1\applmgr\LOCALS~1\Temp>REM install 9i
C:\DOCUME~1\applmgr\LOCALS~1\Temp>REM
C:\DOCUME~1\applmgr\LOCALS~1\Temp>echo "Statusstring Installing 9i - D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\driver\db\driver\gdb920.drv"
"Statusstring Installing 9i - D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\driver\db\driver\gdb920.drv"
C:\DOCUME~1\applmgr\LOCALS~1\Temp>D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jre\NT\1.3.1\bin\java -mx512M -classpath .;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\RapidWiz.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jre\NT\1.3.1\lib\rt.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jre\NT\1.3.1\lib\i18n.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\ewt-3_4_9.zip;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\swingall-1_1_1.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\share-1_1_11.zip;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\jnls.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\acc.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\help-3_1_8.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\oracle_ice-4_06_6.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\netcfg.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\xmlparserv2.zip;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\adconfig.zip oracle.apps.ad.autoconfig.InstantiateFile -e e:\oracle\proddb\9.2.0\appsutil\PROD_sysd.xml -d D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\driver\db\driver\gdb920.drv -pwd no_password_here -log e:\oracle\proddb\9.2.0\appsutil\log\PROD_sysd\dbInstall.log -nthreads 16 -verbose
Please specify valid number of threads. [1-12]
usage:
java oracle.apps.ad.autoconfig.InstantiateFile
-e ENV_FILE [[-d INST_DRV [-log LOGDIR -bacdir BACKDIR]] ||
[-d INST_DRV -tmpl TEMPLATE [-log LOGDIR -bacdir BACKDIR]] ||
[-tmpl TEMPLATE [-out OUTFILE]]] [-pwd PASSWORD] [-test] [-nthreads NUMBER]
java oracle.apps.ad.autoconfig.InstantiateFile
-name VAR_NAME -value VAR_VALUE [-tmpl TEMPLATE] -out OUTFILE [-pwd PASSWORD]
java oracle.apps.ad.autoconfig.InstantiateFile ENV_FILE INST_DRV
where:
ENV_FILE = Applications Context file to provide replacement vars
INST_DRV = Instantion File Driver to define templates to be instantiated
TEMPLATE = Template to be instantiated
LOGDIR = The log file directory (default=<APPL_TOP>/admin/<CONTEXTNAME>/log/timestamp)
BACKDIR = The directory for backing up previous templates
(default=<APPL_TOP>/admin/<CONTEXTNAME>/out/timestamp)
OUTFILE = Output file
PASSWORD = APPS password
VAR_NAME = A variable name to be replaced
VAR_VALUE = The value pair to VAR_NAME
NUMBER = Number of threads to be used in the zip action. Range [1-20]
C:\DOCUME~1\applmgr\LOCALS~1\Temp>if 1 == 0 goto :DBINSTALL_OK
C:\DOCUME~1\applmgr\LOCALS~1\Temp>echo "Cannot execute Install for database ORACLE_HOME"
"Cannot execute Install for database ORACLE_HOME"
C:\DOCUME~1\applmgr\LOCALS~1\Temp>if "" == "TRUE" goto :DBINSTALL_OK
Error - script has returned an error: 1
Error Code received when running external process. Check log file for details.
Running Database Install Driver for PROD instance
Processing DriverFile = D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\template\adridb.drv
Running Instantiation Drivers for D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\template\adridb.drv
Invalid target file name in driver file: <s_com>\admin\out
instantiate file:
source : D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\template\adrun8i.cmd
dest : e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrun8i.cmd
backup : e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrun8i.cmd to C:\DOCUME~1\applmgr\LOCALS~1\Temp\templbac\adrun8i.cmd
instantiate file:
source : D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\template\adrun9i.cmd
dest : e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrun9i.cmd
backup : e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrun9i.cmd to C:\DOCUME~1\applmgr\LOCALS~1\Temp\templbac\adrun9i.cmd
instantiate file:
source : D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\template\adrundb.cmd
dest : e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrundb.cmd
backup : e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrundb.cmd to C:\DOCUME~1\applmgr\LOCALS~1\Temp\templbac\adrundb.cmd
Step 0 of 3
Command: e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrun8i.cmd
Processing Step 1 of 3
Step 1 of 3
Command: e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrun9i.cmd
Processing Step 2 of 3
Executing: e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrun9i.cmd APPS APPS
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM $Header: adrun9i.cmd 115.19 2003/07/17 00:44:06 psaddi ship $
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM ###############################################################
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM This file is automatically generated by AutoConfig. It will be read and overwritten.
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM If you were instructed to edit this file, or if you are not able to use the settings
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM created by AutoConfig, refer to Metalink document 165195.1 for assistance.
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM ###############################################################
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>FOR /F "delims==" %a IN ('DATE /T') DO (set date=%a )
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>(set date=Fri 07/25/2008 )
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>FOR /F "delims==" %a IN ('TIME /T') DO (set time=%a )
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>(set time=05:49 PM )
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>ECHO STARTED INSTALL PHASE : 9I RDBMS : Fri 07/25/2008 05:49 PM
STARTED INSTALL PHASE : 9I RDBMS : Fri 07/25/2008 05:49 PM
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>SET JRE_PATH=D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jre\NT\1.3.1\bin\java
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>SET JRE_CP=.;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\RapidWiz.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jre\NT\1.3.1\lib\rt.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jre\NT\1.3.1\lib\i18n.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\ewt-3_4_9.zip;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\swingall-1_1_1.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\share-1_1_11.zip;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\jnls.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\acc.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\help-3_1_8.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\oracle_ice-4_06_6.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\netcfg.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\xmlparserv2.zip;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\adconfig.zip
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>SET ENV_FILE=e:\oracle\proddb\9.2.0\appsutil\PROD_sysd.xml
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>SET PATH=D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\unzip\NT;C:\Perl\bin;D:\MKS\bin;D:\MKS\bin\x11;D:\MKS\mksnt;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;D:\VC98\Tools\WinNT;D:\VC98\MSDev98\Bin;D:\VC98\Tools;D:\VC98\bin
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>SET EC=ERRORCODE
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>IF "5" == "1" (SET THREADS=1 ) ELSE (SET THREADS=16 )
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>CD /D C:\DOCUME~1\applmgr\LOCALS~1\Temp
C:\DOCUME~1\applmgr\LOCALS~1\Temp>REM
C:\DOCUME~1\applmgr\LOCALS~1\Temp>REM Install 9i will only happen, if database is "db920"
C:\DOCUME~1\applmgr\LOCALS~1\Temp>REM
C:\DOCUME~1\applmgr\LOCALS~1\Temp>if "db920" == "db920" goto :INSTALL_DB
C:\DOCUME~1\applmgr\LOCALS~1\Temp>REM Installing 9i RDBMS
C:\DOCUME~1\applmgr\LOCALS~1\Temp>REM
C:\DOCUME~1\applmgr\LOCALS~1\Temp>REM Setting the driver file name
C:\DOCUME~1\applmgr\LOCALS~1\Temp>REM
C:\DOCUME~1\applmgr\LOCALS~1\Temp>SET DRVNAME=gdb920.drv
C:\DOCUME~1\applmgr\LOCALS~1\Temp>REM
C:\DOCUME~1\applmgr\LOCALS~1\Temp>REM install 9i
C:\DOCUME~1\applmgr\LOCALS~1\Temp>REM
C:\DOCUME~1\applmgr\LOCALS~1\Temp>echo "Statusstring Installing 9i - D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\driver\db\driver\gdb920.drv"
"Statusstring Installing 9i - D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\driver\db\driver\gdb920.drv"
C:\DOCUME~1\applmgr\LOCALS~1\Temp>D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jre\NT\1.3.1\bin\java -mx512M -classpath .;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\RapidWiz.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jre\NT\1.3.1\lib\rt.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jre\NT\1.3.1\lib\i18n.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\ewt-3_4_9.zip;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\swingall-1_1_1.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\share-1_1_11.zip;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\jnls.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\acc.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\help-3_1_8.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\oracle_ice-4_06_6.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\netcfg.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\xmlparserv2.zip;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\adconfig.zip oracle.apps.ad.autoconfig.InstantiateFile -e e:\oracle\proddb\9.2.0\appsutil\PROD_sysd.xml -d D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\driver\db\driver\gdb920.drv -pwd no_password_here -log e:\oracle\proddb\9.2.0\appsutil\log\PROD_sysd\dbInstall.log -nthreads 16 -verbose
Please specify valid number of threads. [1-12]
usage:
java oracle.apps.ad.autoconfig.InstantiateFile
-e ENV_FILE [[-d INST_DRV [-log LOGDIR -bacdir BACKDIR]] ||
[-d INST_DRV -tmpl TEMPLATE [-log LOGDIR -bacdir BACKDIR]] ||
[-tmpl TEMPLATE [-out OUTFILE]]] [-pwd PASSWORD] [-test] [-nthreads NUMBER]
java oracle.apps.ad.autoconfig.InstantiateFile
-name VAR_NAME -value VAR_VALUE [-tmpl TEMPLATE] -out OUTFILE [-pwd PASSWORD]
java oracle.apps.ad.autoconfig.InstantiateFile ENV_FILE INST_DRV
where:
ENV_FILE = Applications Context file to provide replacement vars
INST_DRV = Instantion File Driver to define templates to be instantiated
TEMPLATE = Template to be instantiated
LOGDIR = The log file directory (default=<APPL_TOP>/admin/<CONTEXTNAME>/log/timestamp)
BACKDIR = The directory for backing up previous templates
(default=<APPL_TOP>/admin/<CONTEXTNAME>/out/timestamp)
OUTFILE = Output file
PASSWORD = APPS password
VAR_NAME = A variable name to be replaced
VAR_VALUE = The value pair to VAR_NAME
NUMBER = Number of threads to be used in the zip action. Range [1-20]
C:\DOCUME~1\applmgr\LOCALS~1\Temp>if 1 == 0 goto :DBINSTALL_OK
C:\DOCUME~1\applmgr\LOCALS~1\Temp>echo "Cannot execute Install for database ORACLE_HOME"
"Cannot execute Install for database ORACLE_HOME"
C:\DOCUME~1\applmgr\LOCALS~1\Temp>if "" == "TRUE" goto :DBINSTALL_OK
Error - script has returned an error: 1
Error Code received when running external process. Check log file for details.
Running Database Install Driver for PROD instance
Please guide.Hi,
Thank you for reply, i have changed the stage directory name but error is this one appearing, you can check above log file.
C:\DOCUME~1\applmgr\LOCALS~1\Temp>if 1 == 0 goto :DBINSTALL_OK
C:\DOCUME~1\applmgr\LOCALS~1\Temp>echo "Cannot execute Install for database ORACLE_HOME"
"Cannot execute Install for database ORACLE_HOME"
C:\DOCUME~1\applmgr\LOCALS~1\Temp>if "" == "TRUE" goto :DBINSTALL_OK
Error - script has returned an error: 1
Error Code received when running external process. Check log file for details.
Running Database Install Driver for PROD instance
Processing DriverFile = D:\Stage11\startCD\Disk1\rapidwiz\template\adridb.drv
Running Instantiation Drivers for D:\Stage11\startCD\Disk1\rapidwiz\template\adridb.drv
Invalid target file name in driver file: <s_com>\admin\out
instantiate file:
source : D:\Stage11\startCD\Disk1\rapidwiz\template\adrun8i.cmd
dest : e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrun8i.cmd
backup : e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrun8i.cmd to C:\Documents and Settings\applmgr\My Documents\templbac\adrun8i.cmd
instantiate file:
source : D:\Stage11\startCD\Disk1\rapidwiz\template\adrun9i.cmd
dest : e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrun9i.cmd
backup : e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrun9i.cmd to C:\Documents and Settings\applmgr\My Documents\templbac\adrun9i.cmd
instantiate file:
source : D:\Stage11\startCD\Disk1\rapidwiz\template\adrundb.cmd
dest : e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrundb.cmd
backup : e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrundb.cmd to C:\Documents and Settings\applmgr\My Documents\templbac\adrundb.cmd
Step 0 of 3
Command: e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrun8i.cmd
Processing Step 1 of 3
Step 1 of 3
Command: e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrun9i.cmd
Processing Step 2 of 3
Executing: e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrun9i.cmd APPS APPS
------------------------------------------ -
Error while installing Oracle Database Lite 10.2.0.1.1 for Win
Hello,
I am trying to install Oracle Database Lite 10.2.0.1.1 on Windows XP. I am going according screens on this page:
http://www.oraclebrains.com/2008/07/installing-oracle-database-lite-10g-release-3-mobile-server/
But at Step:12 - Mobile Server repository Wizzard after password enter I get error --- Io exception: The Network Adapter could not establish the connection. May I insert specific password for Username SYSTEM? Or where is problem?
Thanks for hint
DavidHi,
I have the same problem but, how can i know what my SID is ? i am trying with "ORCL" and it doesnt work.
Do you know in which file i can get it ? in the documentation of the installation i found this:
"If you are not sure of the values to enter for the URL, then you can query the data dictionary to obtain these values.
Connect as SYSTEM and run the following queries.
To retrieve the SID, execute: select instance_name from v$instance;
If you need to retrieve the port number, check the listener.ora file on the
back-end database."
But how can i query the database if i have not finished to install it yet and where is located the listener.ora file ?
I hope you can help me.
Thank you. -
Trouble installing 2.1.1 for ipod touch generation 1
I am having troubles installing 2.1.1 ipod touch software on a gen. 1 ipod touch. I am using an IMac G5, itunes 8, OS 10.5.4 and the process of updating in itunes has frozen with the blue candy stripe bar spinning as it says "preparing iPod software for restore."
The ipod is black with an white apple and a spinning wheel.
It's been about 5 hours.
What should I do?
Cheers.Just found some info on apple support.
Updating your iPhone and iPod touch to iPhone software 2.0 or later for the first time
Software updates prior to iPhone software 2.0 updated the device without affecting your settings or media content. Updating your iPhone and iPod touch from iPhone software 1.x to 2.0 or later includes a back up, erase, and then restore of your device prior to installing the new update. iTunes will offer to create a one-time media backup of your device depending on what content is on your device and what content is stored in the iTunes Library you are connected to. You should ensure that you have enough free space on your Mac or PC to accommodate a backup that matches the capacity of your iPhone or iPod touch (4 GB, 8 GB, 16 GB, or 32 GB) if you proceed with the this backup.
As a result of this comprehensive one-time media backup, this process can take some time. The amount of time, is determined by the amount of data on the iPhone or iPod touch.
7 hours and counting. Stay tune. Maybe by tomorrow morning! -
hello
i am having major trouble installing itunes. i had itunes working fine and i went to update it as it told me there was an update which i thought i did. i went on my laptop the next day and it said "itunes was not installed correctly error 7 windows error 998"
i read a few articles on here but i am having no joy. i uninstalled itunes and reinstalled and that did not work. i also unistalled some other apple things cant remember the names sorry!
i am not a whiz on a computer so really need some help please!!Installing, and uninstalling, applications never touches or removes the data.
Clean out and uninstall all the apple programs and software thru Programs and manually.
Might want to use Revo and CCleaner
I always use manual standalone installers (and keep a couple backup versions)
itunes 10.5 may affect iTunes media playlists, not sure, depends on what you have.
A search of these forums will show some threads.
I'd clean up vista, you need SP2 or later, and specific error message?
I wonder as you arenot the first with a dell if maybe the OS or included software.
Security programs like Norton and older versions of Kaspersky have been implicated.
Also settings in IE that affect pop-ups and plug-ins. -
Trouble installing shared printer on windows 7 64 bit
hey guys
i recently got a IBM thinkpad with Windows 7 Professional 64 bit.
we have a HP Laserjet 3015 thats shared on windows xp profesional computer. i am having trouble installing it on my comuter. if i connect the printer to my computer via USB, windows finds the drivers and it works.
The problem is when ever i try and insatll it over the network it does not work. i can search and find which computer it is attached to and see it in the shared printer list, but when i ever i try to connect to it says connecting>>searching windows update>>cant find drivers. it gives me the option of searching for the drivers to install. i have downloaded the drivers thats on the HP site but they dont help. when ever i select them in the manual it comes with an error saying driver not found then gives u the option of installing it your self. when u select the driver it says windows can not locate a suitable driver.
how can i get around this ??
This question was solved.
View Solution.rory2g wrote:
i recently got a IBM thinkpad with Windows 7 Professional 64 bit.
we have a HP Laserjet 3015 thats shared on windows xp profesional computer. i am having trouble installing it on my comuter. if i connect the printer to my computer via USB, windows finds the drivers and it works.
The problem is when ever i try and insatll it over the network it does not work. i can search and find which computer it is attached to and see it in the shared printer list, but when i ever i try to connect to it says connecting>>searching windows update>>cant find drivers. it gives me the option of searching for the drivers to install. i have downloaded the drivers thats on the HP site but they dont help. when ever i select them in the manual it comes with an error saying driver not found then gives u the option of installing it your self. when u select the driver it says windows can not locate a suitable driver.
Try the following: On the Windows 7 computer go to the Devices and Printers folder, Add a Printer, Local Printer, Create a new port, Local port, Next, \\xpcomputername\lj3015 (where you put in the actual share name of the computer and printer), OK, Windows Update (and wait for the list to repopulate), HP Laserjet 3015 PCL5, Next, Next.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V -
I'm having trouble instaling a printer driver for my Canon MG5220. I downloaded the latest printer driver from the Canon website (10.67.1.0) and installed it on my Intel iMac. It said the installation was sucessful, but when I try to add a printer, no go. The printer does'nt show up. I'm fairly new to the Mac, after switching from windows. I'm running Snow Leopard 10.6.8.
Hold down the option key and select
▹ System Information...
from the menu bar. In the window that opens, select
Hardware ▹ USB
from the list on the left. On the right you should now see a list of all connected USB devices, as well as some built-in components. Is the device shown? -
Trouble Installing Windows 8.1 on Yosemite
I am having trouble installing Windows 8.1 using the Bootcamp utility on OS X Yosemite. I downloaded the ISO file for 64 bit 8.1 from Microsoft and put it onto an 8gb USB drive using Bootcamp. My Macbook Pro is an early 2011 (MacBookPro8,2) and is currently running OS X 10.10.1. I know that my MBP doesn't usually support booting from a USB, so I modified the info.plist file using the steps outlined in this thread:
Enable Bootcamp to install from usb for OSX 10.9**WORKS**
This got it to give me the option to boot from the USB when I held the option key on startup.
I have tried the following methods for installing with different errors for each:
1. Installing using Bootcamp created partition
For this, I went through the normal steps in bootcamp and when I got to the disk partitioning stage, I tried to format the drive 0 partition 4 using the format button. After formatting, it wouldn't allow me to continue because of this error: "Windows cannot be installed to this disk the selcted disk har an MR partition table. On EFI systems, windows can only be installed to GPT disks." This lead me to this thread: Windows can't be installed on Drive 0 Partition 4.. It mentions a difference between EFI v. preUEFI installations, but I don't know how to do a preUEFI installation. Enlighten me anyone?
2. Creating a "free space" partition with Disk Utility
For this, I created a free space partition in disk utility and used the Window's installer to format the partition. This allows me to get to the very end of installation, but I get the error message: "Windows could not update the computer's boot configuration. Installation cannot proceed."
BTW, FileVault is turned off.
Any help would be much appreciated!Hi mgallego,
Which step did the error start to occur ?Have you tried to install it again to have a check ?As the information stated, we can restart the machine to have a check.
Here is a link for reference of the requirements of the Windows 8.1 .
System requirements
http://windows.microsoft.com/en-HK/windows-8/system-requirements
There may be a hardware issue here, it is also recommended to look for help from the manufacturer for help.
Best regards
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected] -
I am having trouble installing itunes on my computer. The error says, "service apple mobile device failed to start. Verify that you have sufficient privileges to start system requirements." this is my home PC.
Hi Iss9243,
Welcome to the Support Communities!
You've already tried some great troubleshooting steps, but the article below gives you quite a few more for this issue. Hope it helps ....
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Cheers,
- Judy -
Can not Install Oracle Database 11g Release 2
This will be my second time trying to install Oracle Database 11g Release 2 on my Computer. I have Windows 7 x64 and when go through the setup phase, I receive numerous errors stating that files are missing and it will never get past that stage. I downloaded both folders for the database:
Oracle Database 11g Release 2 (11.2.0.1.0) for Microsoft Windows (x64)
win64_11gR2_database_1of2.zip (1,213,501,989 bytes) (cksum - 3906682109)
win64_11gR2_database_2of2.zip (1,007,988,954 bytes) (cksum - 1232608515)
Can anyone tell me what I am doing wrong?Pl post the complete error message. Have you unzipped the two files into the same directory ?
Oracle 11g R2 Windows Installation issue
Re: 11g R2 install failure
Srini -
Can we install Oracle Database 10g 32 bit on Windows 2008 64bit
Can we install Oracle Database 10g 32 bit on Windows 2008 64bit will there be any disadvantages, will all the features of Oracle database work ( Like Data Guard , OEM, Grid Control).
Solution will be appriciated.Hi,
If it is true can you please give me some reference doc, as per my knowledge installing Oracle Database 10g 32 bit on Windows 2008 64bit must be possible.
Thanks & Redards -
How to install Oracle Database 10.2.0.3
Hi,
I need to install Database 10.2.0.3 in a Windows Server 2003 R2, but I don`t kown what is the best opcion:
a) Install directy Database 10.2.0.3 that I have downloaded from Oracle web http://www.oracle.com/technology/software/products/database/index.html
At this web, it recomends install 10.2.0.3 in Windows Vista ONLY!!!!!!
b) First, install base version 10.2.0.1 and yhen apply patch number 5337014.
How must I Install RDBMS 10.2.0.3 in Windows Server 2003 R2????
ThanksYou have wasted your bandwidth by downloading a 'Windows Vista ONLY' version, It is clear why.
You must install the 10.2.0.1.0 for windows on your Windows 2003 and once it is installed, just perform a second install from the stage area where the 10.2.0.3.0 patchset was uncompressed. Detailed instructions can be found within the companion readme file. You must make sure all related services have been shutdown prior to apply the patch. Once the patch has been applied database upgrade step takes place, only if you currently have databases running on 10.2.0.1.0.
~ Madrid
Maybe you are looking for
-
my computer will not let me download the latest itunes, is there a way to restore my ipad2 without the lastest itunes version?
-
Packager fails with "Maximum file path name exceeded" on InCopy
Attempting to build the full suite with CCP 1.5.0 Build 83, running on Window 8.1 update 64-bit. When building a 32-bit package it reaches InCopy it always stops and provides the so helpful "Maximum file path name exceeded error". This appears to on
-
Hello Gurus Goodafternoon every body, We have one requirement for export sales: for this industry no excise duty is there but they will pay customs duty , how to configure in export pricing procedure ( for this industry all other taxes are
-
Actions defined in Keynote are supported in iPad iBooks and not in iPad Keynote itself...
When I use actions in the build of slides produced with Keynote on my Mac, they work well on my iPad when I integrate this Keynote presentation in iBooks Author using the Keynote Widget. But strangely enough actions used in a Keynote produced on my M
-
Hello All, We ahve assets in 2008 that are needed to be changed the Depreciation Key using special depreciation key in a particular depreciation area. The depreciation area to used is not posting in gl. After changing the depreciation key, we set the