Trouble installing Elph camera solution disk on Mac version 10.8

Just bought a Power Shot Elph 110 HS and the disk says it's for Mac version 10.6. I have a Mac 10.8 and it won't install. How do I download a more recent version of the camera solution disk?

Hi Mandz2,
For updated versions if the software for your PowerShot ELPH 110 HS, please go here.
You'll need the CD-ROM in the optical drive of your computer to install the "PhotoStitch 3.2.6 Updater for Mac OS X"
When installing the software, please install ImageBrowser last. This allows it to link to the other Canon software.
You'll need an active internet connection when installing the software. Please follow any on-screen instructions carefully.
I hope this helps..
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Similar Messages

Digital camera solution disk will not install on MS Vista

Initial installation on gift machine with MS Vista was fine. Months after a reinstall the Digital camera solution disk 28.2 for Canon A340 will not install on mchine, but installed fine on a Win 7 machine. The installation goes up until it starts installing then an error message (no code) just states it cannot install.

"I will try to make a disk on his."
I doubt this will work either. MS has diffintely screwed uo Win 8 especially if you don't want a MS account.
Do you know how to use Computer Management? This is going to be purposely vague because if you don't you really shouldn't do this.
Go into Computer Management, right click on Administator and click General.
Uncheck the Account is disabled box. It is also a good idea to set a password for the Administrator account since it has total unrestricted access to the system. Now you can log off your current account and you’ll see the Administrator account show up in the list of users.
EOS 1Ds Mk III, EOS 1D Mk IV, EF 50mm f1.2 L, EF 24-70mm f2.8 L,
EF 85mm f1.2 L II USM, EF 70-200mm f2.8 L IS II,
Sigma 120-300mm f2.8 EX APO, Photoshop CS6, ACR 9, Lightroom 6

Having trouble installing iMovie HD on a new Mac with Mavericks

I am having trouble installing iMovie HD on a new Mac with Mavericks.
I know that iMovie HD works with Mavericks because we are using it on other Macs successfully. However, those machines were upgraded starting with OS 10.6. In other words, iMovie HD was installed on these Macs when the Macs had Snow Leopard.
When I use the iLife 06 disc, I am presented with “You can't open the application “iLife 06” because PowerPC applications are no longer supported."
I understand that iMovie HD is universal, not PowerPC. How can I get past this to install iMovie HD.
Thanks

OK, I made some progress.
I used Pacifist (Shareware) to open the iMovie HD 6 install packages from the iLife '06 installer DVD (iMovie.pkg and iMovieThemes_Tiger.pkg) and let Pacifist install them to the right places.
But doesn't iMovie HD 6 require QuickTime 7 to work ?

I Cannot use my digital camera solution disk on windows 8.1

I Cannot use my digital camera solution disk on windows 8.1

Hi Bpboyink!
So that the Community can help you better, we will need to know exactly what model camera you're using. Any other details you'd like to give will only help the Community better understand your issue.
Thanks and have a great day!

Anyone have trouble installing blockbuster on-demand app on Mac. My mac downloads the app but i can't seem to find the dowload file in my macHD folder so that I can install the app. I have the OSX version 10.6.8

anyone have trouble installing blockbuster on-demand app on Mac. My mac downloads the app but i can't seem to find the dowload file in my macHD folder so that I can install the app. I have the OSX version 10.6.8

Where are you downloading the app from?
The only one I can find is for iOS based devices > Blockbuster On Demand for iPhone, iPod touch, and iPad on the iTunes App Store

In trying to install a Flash update on my Mac (version 10.7.5), I'm getting an "unable to install metafile" message after initialization starts (at the 25% point)-regardless of the site from which I download the installation folder.

In trying to install a Flash update on my Mac (version 10.7.5), I'm getting an "unable to install metafile" message after initialization starts (at the 25% point)—regardless of the site from which I download the installation folder.

Hello everybody, good news: after upgrading to Mountain Lion 10.8.5 I've been able to run the installer and all went fine.
Mountain Lion allows user to force execution through the context-menu (CTRL-click) Open command and it does work, just that simple.
So my advice is: if you want to install or re-install Flash Builder 4.6 on a Mac with Lion installed, upgrade to Mountain Lion or better to avoid problems.
Apple introduced some (not all) Gatekeeper functionalities in 10.7.3 and following, but apparently you need a full-fledged 10.8 to have also what you need to circumvent a Revoked Certificate error.
Since usually OS X has auto updating active, if you are running Lion you end up with 10.7.5 and won't install FB46. If you manage somehow to hold 10.7.2 I suppose you should be able to install FB46, sincerely I didn't check it out. Anyway it's simpler and safer to move on to 10.8.x.
Bye

Installing EOS Digital Solution Disk Ver 25.2

Trying to install EOS digital solution Ver 25.2 to PC. At very start, options are "ASIA" or "OCEANIA". But I am Europe? Should I put in Asia and continue? Or have I been supplied with a wrong Disk?

When I try to open the EOS digital solution disk ver 24.1 for my new Canon Rebel T3i camera on my Mac 10.5.8 a notice "this software is not supported by the CPU you are using" comes up
You need to contact Canon - or read the software specs - it sounds like the software you got form them is not supported by your computer
Do I need this software?
Probably not - exactly what about it do you want?
Can I just download the pictures to my Mac without using the Canon software?
Probably - if you are shooting JPEG - launch iPhoto and in the iPhoto preferences set action when a camera is connected to launch iPhoto and connect your camera - iPhoto should launch and you should be able to import
Some cameras need to be set to mass storage mode - read your camera manual for details and procedures
If you are using RAW then your camera needs to be on this list and you need the versions of software noted - http://support.apple.com/kb/HT4757 - for older OS versions you can use google to find the list of supported cameras
LN

Having trouble installing adobe flash player on my mac

Having trouble installing adobe flash player on my mac

See: How to perform a "clean install" of Flash Player in Mac OS X
Unless you're using an older (PPC) Mac with OS 10.5 or older, those instructions should work.

After installing eos digital solutions disk ver 24.1,get error message (see Below)

I am installing in win7 /64 and can't run any of the programs on the eos digital solutions disk ver 24.1. I have tried different resolutions on my monitor including 1024x768 but end up with the same message.,I get an error message as follows: " this software doesn support screen res. lower than 1024x768" but my res is set higher!!
could someone please help?
Solved!
Go to Solution.

maxebaldwin wrote:
I am installing in win7 /64 and can't run any of the programs on the eos digital solutions disk ver 24.1. I have tried different resolutions on my monitor including 1024x768 but end up with the same message.,I get an error message as follows: " this software doesn support screen res. lower than 1024x768" but my res is set higher!!
could someone please help?
Solution disk 24.1 is pretty old; you should install the latest updaters from the Canon site before trying again.
That said, the problem may not be in the Canon software at all, but in the driver for your monitor. If the driver is sufficiently primitive, the Canon software may not be able to tell what resolution your monitor is capable of. Try to find and install the manufacturer's latest driver.
Bob
Boston, Massachusetts USA

Power Shot SX260HS Digital Camera Solution Disk will not install on my computer.

Following the on screen instructions, after verifying the device, the software begins to install then a pop up screen comes on that says "a program needs my permission to continue" and after I click "continue" the software stops installing and a pop up screen comes up that says "unkown install errror" and it will not continue to install. It seems that the first pop up interferes with the installation but I do not know how to override that. Please help. Thank you

Hi espring453,
The window that pops up asking for permission is called the User Account Control. If it is interfering with the installation, it will need to be fixed or disabled. Microsoft can help you with this, but you will need to contact them directly. They also have an article on their website about turning this feature on and off. Please refer to the link below:
http://windows.microsoft.com/en-us/windows/turn-user-account-control-on-off#1TC=windows-7
This didn't answer your question or issue? Find more help at Contact Us.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Do I need to delete an older version of Digital Camera Solution Disk before installing a new one?

I recently purchased an SX280. I have an earlier version of the support software on my computer. Will the new over-write the old or should I delete the old version first?

Delete the first version first..its safer that way and less risk of a corrupted installation. I think it will install either way though but better safe than sorry.

Trouble Installing Software Bundle on my new Mac

Hi, I've had my tablet and software bundle for a couple years now. I've installed the software bundle and wacom tablet on pcs in the past with no trouble. I tried to install Photoshop Elements 8 on my new Mac, which in the instruction manual it says it is compatible with. But every time I click on installation, a PSE icon pops up in the menu bar, bouncing up and down, and it asks for my permission(I have to enter my password, I understand how this part works, and it's all well and good). The trouble starts after I enter my password to allow the process to continue. A second PSE icon pops up in the menu bar along the bottom of my screen, and the installation process starts, but the first remains and keeps jumping up and down. I've clicked on it again and again, and nothing shows up, and it won't go away. Meanwhile, the intallation progress is stuck on main_pageSubtitle, which it progresses along until the very end, where it stops, and won't go any further. However, if I right click on either icon and click either Quit or Force Quit, the process stops and closes altogether.
I've tried a number of things and nothing works. I've opened the software bundle folder and gone directly to the photoshop element 8 folder and clicked on the install icon there. I've clicked on Install Adobe Photoshop Elements 8 in the window that the program opens automatically. I even installed Nik Colour Efex Pro, which says it won't even work without Photoshop Elements 8 installed. THAT installation went off without a hitch. I've tried restarting my computer and doing it over again.
I'm running out of options and getting very frustrated. If anyone has any suggestions please help me out.

Have you been manually removing any bits of the failed installs that did get installed between attempts? You need to do that. I would run this, then do a search in applications, hard drive>library>appllcation support>adobe and also your username>library for anything that's there and remove it. Are you running lion or mountain lion?

Trouble installing and uninstalling Flash Player for Mac 10.4.11

Hello,
I have a Macbook Intel Core Duo Version 10.4.11
I am running Firefox 3.6.13
The problem is when I download the new version of Flash and I go to press the install button, it does nothing.
I have tried to uninstall my old version of Flash which is 9.0 but again it does nothing when I press the uninstall button.
Can someone please help?

Hi, When you refer to a "button", is this a button on your Mac? If so then that is difficult for me to advise you on since I don't use a Mac. I don't know how the Uninstall file or the Install file works. All I can relate to is the PC. With the PC, the Uninstaller can be downloaded and SAVED to the Desktop. Likewise the Installer. Then all browser windows are closed and ran from the Desktop.
How this works in the Mac is what I don't know.
Read the following since Chris Campbell knows more than I do:
http://forums.adobe.com/message/3546077#3546077
If this doesn't help you then perhaps another Mac user will see your post and help. I think I would go to the Apple Discussion forums since I'm sure you'll find the solution there.
http://discussions.apple.com/help.jspa
Thanks,
eidnolb

I am having trouble installing Adobe flash to my i mac--any suggestions?

I am having trouble downloading and installing Adobe flash player to my i mac,--any suggestions?

Two bugs, one affecting Apple's Mac platform and another attacking Microsoft's Windows, exploit certain Flash player vulnerabilities to install malware onto users' systems, reports ArsTechnica. While users of other operating systems like Linux have yet to report attacks, Adobe's advisory notes the exploit affects all platforms.
Designated as CVE-2013-0634, the first vulnerability targets the Safari and Firefox Web browsers running on OS X, and is also being used as a trojan to deploy Microsoft Word documents containing malware. For Mac users, the flaw affects Adobe Flash Player version 11.5.502.146 or earlier.
On March 1 Apple again blocked Flash Player for Lion and Mountain Lion:
http://support.apple.com/kb/HT5660
The Adobe Flash patch can be found on Adobe’s website, and users can visit this page to check if their software is the most curent version.
You should uninstall any previous version first, and repair permissions after installing the new version.

Refurbished Powerbook G4, Trouble Installing Included 10.4 disks

We've been trying to install the disks included with our refurbished powerbook G4, to upgrade it to 10.4. Upon reboot with the installation disks, it gives us an error saying that the install cannot be completed on the hard drive. It sounds like some problems people have been having trying to use the disks to upgrade their other systems, but... these are the ones that came with the machine when we got it less than a week ago.
Help? I need this machine for work and I'm desperate.

Do you have any USB or Firewire hard drives attached to your system? If yes, are you sure that you're trying to install to the internal hard drive and not an external one?
Stu

Trouble installing Elph camera solution disk on Mac version 10.8

Similar Messages

Maybe you are looking for