Trouble installing fix pack 3

Hello,
I was able to get the service pack onto my computer and the folders are available when I click on the folder with the executable file I continue to click on a number of folders (package, langs, de, setup). When I get there and try to run it I get an error message saying:
An error occured while parsing installer setup file and then gives the file path it also then says OR the file could not be located.
Am i storing the file in the wrong place?

Don't think you have to put the Fixpack files any place special.  Are you sure you have the Fixpack for the Xcelsius version you have installed on your PC? There are a few different Xcelsius offerings and the Fixpack must be from the corrresponding flavor.

Similar Messages

  • BO XIR 3.1 Edge- Problem installing Fix Pack 1.1

    I am trying to install Fix Pack 1.1 for XIR3.1 Edge.
    The BO installation is installed on c:\businessobjects
    When asked for Server Instance and Service Name:
    SERVER INSTANCE = Server name
    SERVICE NAME = defaults to TomCat55
    However, I get this error. Where am I going wrong?
    Application server instance not detected in directory '$/conf/Catalina'.

    Hi Joe,
    try localhost as server name.
    Regards,
    Stratos

  • No PowerPoint or PDF after installing Fix Pack 2 for Xcelsius Present 2008

    Have installed Fix Pack 2 for Xcelsius Present 2008
    Seemed like big improvement - smoother and no crashes.
    But -
    Exported to PowerPoint, closed everything down. Opened PowerPoint file and nothing.
    Exported to PDF - said that I should upgrade to new Flash program. Installed Flash 10. - Opened PDF file and nothing.
    Please help

    Hi Bruce,
    Try exporting to .SWF and seeing if you can run that without a problem.
    Then try importing that .SWF into PowerPoint to see if you can set that up without a problem.
    From there we can see if it is an Xcelsius issue or another PC issue.
    Thanks,
    Brian

  • XI3.1: How to install Fix Packs and Service Packages

    Hi there,
    I'm a Business Objects newbie
    I'm searching a guide which explains me, how to install Fix Packs and Service Packages for XI 3.1.  And I've one more question: Where can I see the current Service Package in the System?
    Best regards,
    Andreas

    Hi,
    You can refer the Install guide from the below URL for the installation of FP's or SP's for BOE.
    http://help.sap.com/  ---> go to the Business Objects section and select the FP or SP install guide which you want to install.
    -Noor.

  • Installing Fix Pack for Business Objects EDGE XI R3

    Hi,
    Has anyone had any experience installing the Business Objects EDGE XI R3 fixpack?
    I'm curious as to how to install it and what changes it will make.  I tried quickly searching the SAP support site and did not find much.
    I want to find out as much as possible before installing this in a LIVE system.
    We are using RHEL with tomcat and mysql for our system.
    Thanks in advance,
    Dave

    Hi,
    you can find the "fixed issues" and "whats new" documents at the download of the FP. Just click the "Info" link and you will be pointed to the Documents.
    You only need to install a FP if this solves an actual Bug you are facing with.
    The only installation Problem i often face is the deployment of the Web Applications of the Fix Pack. Somethimes i have to re- deploy all the war Files using wdeploy.
    So if you have a custom Web Application deployed on  your BOE Tomcat or customized the BOE Application make a Backup before.
    Regards
    -Seb.

  • How To Install Fix Pack 3 For Xcelsius Present

    After downloading Fix Pack 3 for Xcelsius Present and preparing to install, the wizard asks me to uninstall the software.  A co-worker with the same version (including build number) downloaded and installed the same Fix Pack without being asked to uninstall the software.   Why does the install require an uninstall of the original software?
    Is there some place to find the key as I have misplaced it?

    Installation files:
    http://service.sap.com/patches
    Browse our Download Catalog -> SAP BusinessObjects portfolio-> SAP BusinessObjects Business Intelligence platform (SBOP Enterprise)-> BOBJ ENTERPRISE XI 3.1
    For the installation guide take a look at SAP note 1487252 (http://service.sap.com/notes)
    Regards,
    Stratos

  • Problem installing fix pack

    corrupt files notice when in process of installing the fix pack 3.1?

    When you download the file, there will be a file size shown. When you have downloaded the file, check the file size. If they're not identical, then the file isn't downloaded properly.
    If your downloads keep finishing prematurely, try using the SAP download manager.
    If you download is complete (the file size is right) please post back with the version.

  • Trouble installing Jam Pack #1 (the original)?

    Also posted in Logic but it also makes sense to post here unless there are rules against cross-posting.
    Recently doing a migration from a PPC to a Mac Pro.
    Anyway, I was trying to reinstall Jam Pack 1 (the original Jam Pack) to use with Logic Pro. I was also planning on using it in Garageband.
    When I tried to install, I kept getting the error "Installation cannot continue until the GarageBand application is installed." But it was installed.
    Did a bit of digging. Found this:
    http://discussions.apple.com/thread.jspa?messageID=1989594&#1989594
    Which led me to examine my directory structure in the Applications Folder. Turns out I had moved Garageband into a subfolder and the installer wasn't able to find it. I just moved it back to its normal spot and the installer was happy.
    I hope this helps someone else.

    also applies to the 1.01 update found here:
    http://www.apple.com/support/downloads/garagebandjampack.html

  • Fix Packs (4.1 & 4.2); Wont Install; Error message: CRC Failed in package

    We receive the following message when we try to install fix packs 4.1 and 4.2.  The fix pack will correct issues identified with the installation of service pack 4. The error message states: "Some installation files are corrupt. Please download a fresh copy and retry the installation".
    I did a second download and receive the same error message.  Has anyone else run into this problem while downloading the identified fix packs (4.1 & 4.2)?
    Dooley

    Are you downloading from the new SAP site or the older BO ESD site located at http://businessobjects.subscribenet.com?
    I know on the ESD site there is a link for "more details". This will bring up a page with the md5 sum of the file.
    After downloading to your workstation you need to run a md5sum program against the downloaded file and make certain that the md5 sum matches what is listed on the ESD site. If it does not match, then your downloaded file is corrupted.
    If you search the internet there are many free md5sum programs. It is usually already included on most unix and linux platforms with the command md5sum.
    Are you downloading windows or unix patches?
    If unix, do not use a windows zip utility. Always transfer the files to your unix server via binary mode ftp and then unzip/untar using unix utilities.
    --Jack

  • Having Error 2902 when installing BO 3.1 fix packs

    Hi,
    After installing BO 3.1 I started installing fix packs 1.1 - 1.2 and 1.3. However, it is giving a fatal error when installing 1.2 and the install rolls back.
    The Error says: "Error 2902. Operation ixfAssemblyCopy called out of sequence"
    Any need appreciated
    Thank you
    Metin

    Yep, I see the FP1.3  there.
    I have one last question:
    In the link you sent, it says: The 2902 errors generally point to authoring issues. One case has been identified as authoring error wherein the win32 sxs components do not include a key path. For this case, adding a key path corrects the problem."
    We always work remotely on the servers. Should I physically go and hook a Keyboard (or keypad) to the server to get rid of this error? Or is there any other solution?
    Thank you
    Metin

  • Fix Pack 3- Which file do I install from the zip file provided

    I just pulled the zip file onto my desktop to install fix pack 3. I thought it would just be one file to install since I already have Xclesius engage 2008 on my computer. But when I looked at the zipped file there was hundreds of files in there. Does anyone know which one I am supposed to run to get the fix pack?

    Hi Adam,
    Did you download FP3 from the support marketplace? If so, you get the file "xcelsius2008_sp1_fp3.zip".
    Opening that zip file will give you two files - "Xcelsius 2008 SP1 Fixpack 3" (folder)and "xcelsius2008_sp1_fp3_fixed_issues.pdf". setup.exe is under that folder.
    If you are not getting this directory structure, you may want to download the file again...
    Bobby

  • Problem after installing upgrade to Fix Pack 2

    Hi,
    I have a formula which is performing differently after installing Fix Pack 2.  The formula is being used within the spreadsheet component and I've selected the ignore blank cells in values on the behavior tab.
    The formula works correctly with Fix Pack 1, but not with Fix Pack 2.
    In Fix Pack 1, the spreadsheet component in design mode correctly displays one row of data (headers).
    In Fix Pack 2, the spreadsheet component in design mode incorrectly displays multiple rows (this should still only show the header row).
    My formula is:
    IF(ISERROR(FIND($A$2,D23,1)),D23,REPLACE(D23,FIND($A$2,D23,1),1," "))
    Basically what this formula does is replace a CR/LF in a field with a space.
    We backed out Fix Pack 2, and the formula works correctly.
    Anyone have any ideas on why Fix Pack 2 is causing this formula to behave differently?
    Thanks.

    Hi Jim,
    Could you install FP3 for Xcelsius and see if this works fine?
    Also try to create a sample model in FP2 with the similar formula and check if it works.Let me know what happens if you install FP3.
    Thanks,
    Amit.

  • New install - Do I install all Service Packs & Fix Packs

    Hi.
    I just installed Engage 2008 to replace my 4.5 version.  I see there is 1 service pack and 3 fix pack versions available.  Should I be installing all 4 of these or just the service pack and the most recent fix pack?  Please advise.
    Thanks!

    Hi Janice,
    First, check your help / about in Xcelsius 2008.  What is the build number?  Depending on what it ends with will help determine what route to take.
    -If it ends in 121, then run the Service Pack 1 installer.  The installer will replace your existing install with Service Pack 1, which will then yield the build number ending in 247.  From here you can install Fix Pack 1.
    -If it ends in 247, then you can just go ahead and install Fix Pack1. 
    In both cases, after Fix Pack 1 is installed, the end result should yield build version 12,1,1,344.
    Hope that helps,
    -david
    edit: sorry, it looks like Sirisha beat me to it.
    Edited by: David Lopez on Nov 19, 2008 12:58 PM

  • Crystal Report Service Pack and Fix Pack

    Dear coleagues,
    I have crystal reports with sp3 client, i would like to know if i have install fix pack 3.1 until 3.5 ??
    Thanks in advance.
    Fabrício

    Hi Fabrício,
    You can apply just FP 3.5, all previous Fix Packs are inclusive.
    Thank you
    Don

  • Xcelsius Present 2008 Fix pack 2 is now available

    Hello,
    Xcelsius Present 2008 Service Pack 1 - Fix Pack 2 (FP2) is now available and posted on the SAP BusinessObjects download support site. You can access it here: <a href="https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/bobj_download/main.htm">https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/bobj_download/main.htm</a>
    It applies to Xcelsius Present only.
    FP2 installs over FP1. No uninstall or new keycode is needed. Please unzip the download before attempting to install.
    The FP2 Fixed Issues document is also available at the above link or in the zip file. While the FP2 Release Notes and Known Issues document is available at http://help.sap.com/content/bobj/bobj/index.htm
    After the upgrade in Help > About your Xcelsius version number should be 5.1.2.0. (Build 12,1,2,439.)
    Fix Packs are cumulative meaning that all the fixes from FP1 are included in FP2. So FP1 does not have to be installed first.
    Gerrit
    Edited by: Andy Brathwaite on Feb 23, 2009 10:08 PM

    I Have a problem install Fix Pack enterprise 2008
    the mensaje error is:
    "Error Interno 2709 Ice64Component.431D74C_62FB_40CE_8FE0_316E68FF00D3"
    and close install program
    do not install
    Can I Help Me ?
    thanks

Maybe you are looking for

  • Generate report for employees on leave for a given period

    Hi, I want to know how can i extract a report of a list of employees who are on leave for a given period of time? For instance i want to a list of employees who are on vacation / leave (any kind of leave) for the period of April 2010 Is there a stand

  • Office Standard 2013 Key Management Service host 32-bit or 64-bit version ?

    Hello, I have a 2012 DomainController serving as our KMS host. I need to activate 2013 Lync 32-bit clients so I will have to install the office 2013 KMS host. The KMS host download is available in both 32-bit and 64-bit. Should I download the 64-bit

  • How do i add my cellphone number to my messages on my macbook

    I want to get my imessages on my laptop but so far it only allowes the ones thru my email how do i add my phone number as well

  • Can't see the video's to edit

    Can't see the video's to edit when i move the mouse over the video's they should appear in the upper right screen, but i get black screen when i click on the play icon down left, i still get black screen, the only videos i can see should be moved to

  • TDS Certificates Number Range issue

    Dear all I am doing J1INMIS for particulat section code say 3200 and withholding key 194 c, then i am updating the challan and it takes me to screen Create remittance challans, here after processing i get the following error- <b>Number Group not main