Trouble installing gmp library

I am trying to install this gmp library so that my c++ can handle larger numbers. I am using a standard installation method:
./configure
make
make check
make install
The ./configure part is where I am having trouble, it says
error: could not find a working complier, see config.log for details
If anyone needs more information to help I will gladly provide.

Thank you Hoffman for your reply.
I went through suggested stackoverflow. However I may need to give more information about what I have done so far. First of all I am using embedxcode installed in xcode 4.6.3. The gmp library installed in /usr/local/cellar/gmp/5.1.3. When I tried to Link binary with libraries I selected index as there is no option for Build phase in the project Tab and this shown in the below picture
Then I added the libgmp.dylib as it can be seen below:
Accrodingly I added the header search path and library search as shown in the picture below
Then i tried to build all but now I am getting different error which says the gmp.h no such file or directory depsite it shows me when I am start call gmp function in the library is reponding as shown below
I hope you can guide me solving this error as I am new to the xcode.

Similar Messages

  • Trouble installing gxml library for LV2011

    When I run the setup file, I just get a msg indicating no files will be installed or removed.  Any ideas?  thx...
    Solved!
    Go to Solution.

    Hello atlasHW,
    Where are you trying to install GXML from? Is it the gxml_140_installer.zip file found here: http://zone.ni.com/devzone/cda/epd/p/id/6330#0requirements? A screenshot of the message you're getting would be really helpful as well.
    Thanks,
    Carisa Leal
    Applications Engineering
    National Instruments
    Applications Engineer
    National Instruments

  • Trouble installing 2.1.1 for ipod touch generation 1

    I am having troubles installing 2.1.1 ipod touch software on a gen. 1 ipod touch. I am using an IMac G5, itunes 8, OS 10.5.4 and the process of updating in itunes has frozen with the blue candy stripe bar spinning as it says "preparing iPod software for restore."
    The ipod is black with an white apple and a spinning wheel.
    It's been about 5 hours.
    What should I do?
    Cheers.

    Just found some info on apple support.
    Updating your iPhone and iPod touch to iPhone software 2.0 or later for the first time
    Software updates prior to iPhone software 2.0 updated the device without affecting your settings or media content. Updating your iPhone and iPod touch from iPhone software 1.x to 2.0 or later includes a back up, erase, and then restore of your device prior to installing the new update. iTunes will offer to create a one-time media backup of your device depending on what content is on your device and what content is stored in the iTunes Library you are connected to. You should ensure that you have enough free space on your Mac or PC to accommodate a backup that matches the capacity of your iPhone or iPod touch (4 GB, 8 GB, 16 GB, or 32 GB) if you proceed with the this backup.
    As a result of this comprehensive one-time media backup, this process can take some time. The amount of time, is determined by the amount of data on the iPhone or iPod touch.
    7 hours and counting. Stay tune. Maybe by tomorrow morning!

  • Having trouble installing CS5.5 on lion 10.7.3?

    Are you having trouble installing CS5.5 on your mac (os lion 10.7.3)? Are you tired of receiving error reports (i recieved "exit code: 24" numerous times)?  there is an easy way without hacking your mac into bits. start your comouter in security mode (hold down the shift key while your mac boots). Pop the CS5.5 Application 1 dvd into the drive and follow the instructions. no problems. no exit codes. no hassel. no swearwords. just an installation that works. why this is necessary is a mystery to me. but it works. after installing, don't forget to restart your mac in order to exit of security modus and return to normality;)
    i hope this helps a few lost souls like me who have wasted hours of their time over the past couple of days. correct me if i'm wrong, but aren't updates suppose to make things work better?

    Hi..
    You can disable the Lion resume feature.
    Open System Preferences > General
    Deselect:   Restore windows when quitting and re-opening apps
    As for Facebook, select "Keep me logged in" ..   even if the page refreshes, you should stay logged in.
    Click on the image once to enlarge.
    For help to avoid Safari from auto refreshing pages, go to   ~/Library/Caches/com.apple.Safari/Cache.db
    For Lion v10.7x:  To find the Home folder in OS X Lion, open the Finder, hold the Option key, and choose Go > Library
    Move the Cache.db file to the Trash. Quit then relaunch Safari.

  • Trouble installing Flash Player 11.8.800.94 on Macintosh

    I have had repeated trouble installing Flash Player 11.8.800.94 on Mac OS X 10.7 (Lion) despite following every step listed in the Macintosh Installation Help guide: uninstalling previous versions, turning off anti-virus protection, etc. Each time I get a warning message for both Safari and Firefox attempted installations as follows: "Error: General installation error." The only solution seemed to be to reinstall an earlier version: 11.7.700.225.
    Any suggestions?

    http://blueskyworkshop.blogspot.com/2013/04/cant-install-flash-on-os-x -mountain.html
    If you're not comfortable with terminal commands:
    Download the offline installer here (right click and "Save as")
    Quit all browsers
    Go to: MacHD/Library/Internet Plugins... and if the Flash Player.plugin is still there "trash it".
    Then go to: Mac HD/Library/Application Support/Adobe and "trash" the Flash Player folder if it's still there.
    Empty the trash.
    Mount the DMG and run the installer
    Relaunch Firefox and it should work

  • HT3606 Trouble installing 10.5.8

    I'm having trouble installing 10.5.8-- the installation process seems to freeze (it'll get maybe 10% through the progress bar, then stays in one place for upwards of 45 minutes).  What can I do?  Thanks!

    Some general advice on updating:
    It is worth noting that it is an extreme rarity for updates to cause upsets to your system, as they have all been extensively beta-tested, but they may well reveal pre-existing ones, particularly those of which you may have been unaware. If you are actually aware of any glitches, make sure they are fixed before proceeding further.
    So before you do anything else:
    If you can, make a full backup first to an external hard disk. Ideally you should always have a bootable clone of your system that enables you to revert to the previous pre-update state.
    Turn off sleep mode for both screen and hard disk.
    Disconnect all peripherals except your keyboard and mouse.
    1. Repair Permissions (in Disk Utility)
    2. Verify the state of your hard disk using Disk Utility. If any faults are reported, restart from your install disk (holding down the C key), go to Disk Utility, and repair your startup disk. Restart again to get back to your startup disk.
    At least you can now be reasonably certain that your system does not contain any obvious faults that might cause an update/upgrade to fail.
    3. Download the correct version of the COMBO update from the Apple download site.
    The Combo updater of Leopard 10.5.8 can be found here:
    http://support.apple.com/downloads/Mac_OS_X_10_5_8_Combo_Update
    If you prefer to download updates via Software Update in the Apple menu (which would ensure that the correct version for your Mac was being downloaded), it is not recommended to allow SU to install major (or even minor) updates automatically. Set Software Update to just download the updater without immediately installing it. There is always the possibility that the combined download and install (which can be a lengthy process) might be interrupted by a power outage or your cat walking across the keyboard, and an interrupted install will almost certainly cause havoc. Once it is downloaded, you can install at a time that suits you. You should make a backup copy of the updater on a CD in case you ever need a reinstall.
    Full details about the 10.5.8 update here: http://support.apple.com/kb/HT3606
    More information on using Software Updater here:
    http://support.apple.com/kb/TA24901?viewlocale=en_US
    Using the Combo updater ensures that all system files changed since the original 10.5.0 are included, and any that may have been missed out or subsequently damaged will be repaired. The Delta updater, although a temptingly smaller download, only takes you from the previous version to the new one, i.e. for example from 10.5.7 to 10.5.8. Software Update will generally download the Delta updater only. The preferable Combo updater needs to be downloaded from Apple's download site.
    Now proceed as follows:
    4. Close all applications and turn off energy saving and screensaver.
    5. Unplug all peripherals except your keyboard and mouse.
    6. Install the update/upgrade. Do not under any circumstances interrupt this procedure. Do not do anything else on your computer while it is installing. Be patient.
    7. When it ask for a restart to complete the installation, click restart. This can take longer than normal, there are probably thousands of files to overwrite and place in the correct location. Do nothing while this is going on.
    8. Once your Mac is awake, repair permissions again, and you should be good to go!
    If your Mac seems slightly sluggish or ‘different’, perform a second restart. It can’t hurt and is sometimes efficacious! In fact a second restart can be recommended.
    9. Open a few of your most used applications and check that all is OK. In this connection please remember that not all manufacturers of third party applications and plug-ins, add-ons, haxies etc, will have had time to do any necessary rewrites to their software to make them compliant with the latest version of your operating system. Give them a week or two while you regularly check their websites for updates.
    N.B. Do not attempt to install two different updates at the same time as each may have different routines and requirements. Follow the above recommendations for each update in turn.
    Lastly, Apple's own article on the subject of Software Update may also be useful reading:
    http://docs.info.apple.com/article.html?artnum=106695
    [b]If you are updating Safari (or just have):[/b]
    Input Managers from third parties can do as much harm as good. They use a security loophole to reach right into your applications' code and change that code as the application starts up.  If you have installed an OS update and Safari is crashing, the very [i]first[/i] thing to do is clear out your InputManagers folders (both in your own Library and in the top-level /Library), log out and log back in, and try again.
    So, disable all third party add-ons before updating Safari, as they may not have been updated yet for the new version. Add them back one by one. If something goes awry, remove it again and check on the software manufacturer's website for news of an update to match your version of Safari.
    Most errors reported here after an update are due to an unrepaired or undetected inherent fault in the system, and/or a third party add-on.
    Additional tips on software installation here:
    http://docs.info.apple.com/article.html?artnum=106692
    To reiterate, Input Managers reach right into an application and alter its code. This puts the behavior of the affected application outside the control and responsibility of its developers: a recipe for  problems. That's not to say that issues absolutely will ensue as a result of Input Managers, but you, as a user, must decide. If the functionality of a specific Input Manager or set thereof is really important to you, you may well choose to assume the associated risk.
    Again, the advice is to remove all Input Managers from the following directories:
    /Library/InputManagers
    ~/Library/InputManagers
    especially prior to system updates (they can always be added back one-by-one later).
    Solutions for troubleshooting installation, startup, and login issues in Mac OS X v10.5
    http://support.apple.com/kb/TS1541?viewlocale=en_US

  • Trouble installing a printer

    I just moved to an intel iMac and am having trouble installing a new Hp Printer. When Going thru the install process it stops with this message The system extension "/System/library/extensions/CNQL2410_ClasssicNotSeize.Kext" was installed improperly and cannot be used. Please try reinstalling it, or contacting the product's vendor for an update.
    How can I go about this. If i locate it on my backup drive can i restore it from my old imac g5?
    Thanks
    Dan

    Your best bet is to go direct to the HP support site, enter the details of the printer and download drivers / follow instructions given there
    http://welcome.hp.com/country/us/en/support.html

  • Trouble installing the apps after downloading Adobe Creative Cloud

    I am having trouble installing the apps after downloading Adobe Creative Cloud. The following Error messages show up:
    ERROR: Third party payload installer vcredist_x64.exe failed with exit code: 2147942750
    ERROR: Failed to repair Microsoft Visual C++ 2012 Redistributable Package (x64). Please try repairing it by double clicking on the executable at "C:\Users\KATHER~1.CDA\AppData\Local\Temp\{63EDD438-B4D0-424C-B05A-7990C09D955C}\Illustra tor_1

    Third party payload installer vcredist_x64.exe failed with exit code: 2147942750

  • I am having trouble installing Adobe Creative Cloud on my windows 7 laptop

    I am having trouble installing Adobe Creative Cloud on my Windows 7 laptop; i keep getting an error message
    this is what I get
    -- Payload: Acrobat Professional 11.0.0.0 {23D3F585-AE29-4670-8E3E-64A0EFB29240} -----------  ERROR: Error 1316.A network error occurred while attempting to read from the file C:\Windows\Installer\AcroStan.msi  ERROR: Install MSI payload failed with error: 1603 - Fatal error during installation. MSI Error message: Error 1316.A network error occurred while attempting to read from the file C:\Windows\Installer\AcroStan.msi  ERROR: Third party payload installer AcroPro.msi failed with exit code: 1603

    http://helpx.adobe.com/creative-suite/kb/error-1603-fatal-error-occurred-1.html
    http://helpx.adobe.com/creative-suite/kb/errors-exit-code-6-exit.html
    Mylenium

  • Error while installing Healthcare Library of SOA 11.1.1.7

    Hi Anuj,
    I have tried to install Healthcare library of SOA 11.1.1.7(PS6). For installation i have followed the following link given posted by you.
    http://www.oracle.com/technetwork/middleware/healthcare/downloads/index.html
    I am unable to install Healthcare library for SOA 11.1.1.7(PS6). I am getting xengineWinstdlibrary BUILDFAILED while executing 3rd step.
    Third step is:
    3. In the command prompt, run the following commands
    a. cd <Middleware_HOME>/<SOA_HOME>/bin
    b. execute command: ant -f ant-soahc-postinstall.xml.
    I am using Windows 7 64 bit system.
    Please help me on this.

    Hi,
    I get similar error as above.I have installed Oracle SOA suite,then created domain and started the admin server.Then was installing SOA for HC as per Healthcare Downloads
    Everything works fine till step 4,then abruptly I get error .Below is the
    > <Middleware_HOME>\org.apache.ant_1.7.1\bin\ant -f ant-soahc-postinstall.xml
    Buildfile: ant-soahc-postinstall.xml
    setProps:
        [input] Enter wls-username: [weblogic]
    weblogic
        [input] Enter wls-password:
        [input] Enter wls-hostname: [localhost]
    localhost
        [input] Enter wls-admin-port: [7001]
    7001
        [input] Enter wls-managed-port: [8001]
    8001
        [input] Enter wls-admin-server-name: [AdminServer]
    AdminServer
        [input] Enter wls-managed-server-name: [soa_server1]
    soa_server1
        [input] Enter wls-platform. Enter one of the following:  ([linux64], linux32
    , win64, win32, aix-powerpc64, hpux-ia64, solaris-sparc64, solaris-sparc32, sola
    ris-ix86_64)
    win64
        [input] Enter db type: ([oracle], oracleEbr)
    oracle
        [input] Enter db url: [jdbc:oracle:thin:@localhost:1521:orcl]
        [input] Enter SOA Schema Username:
    DEV_SOAINFRA
        [input] Enter SOA Schema Password:
    create-prop:
    rundeploy:
         [echo] Starting deployment of SOA Healthcare.
    os.platform:
    updateLinux64Library:
    os.platform:
    updateLinux32Library:
    os.platform:
    updateWin64Library:
    xengineWinstdlibrary:
         [echo] Applying std library
    BUILD FAILED
    <Middleware_HOME>/<SOA_HOME>\bin\ant-soahc-postinstall.xml:71: The follo
    wing error occurred while executing this line:
    <Middleware_HOME>/<SOA_HOME>\bin\ant-soahc-postinstall.xml:118: The foll
    owing error occurred while executing this line:
    <Middleware_HOME>/<SOA_HOME>\bin\ant-soahc-postinstall.xml:215: Execute
    failed: java.io.IOException: Cannot run program "<Middleware_HOME>/<SOA_HOME>\bin\..\soa\thirdparty\edifecs\StdMultiSetupInstOracle.exe" (in directory "
    <Middleware_HOME>/<SOA_HOME>\soa\thirdparty\edifecs"): CreateProcess error=740, The requested operation requires elevation
    I tried elevating the privelegs of running the .exe file with Administrator priveliges but still it doesnt work.
    I am using Windows 7 64 bit system.
    Please help

  • Hello i am having trouble installing itunes 10.5 on my laptop i have windows vista. it says error 7 windows error 998. i now have no itunes. i have tried to uninstall itunes but it still wont work and keep coming up with that message. please help!

    hello
    i am having major trouble installing itunes. i had itunes working fine and i went to update it as it told me there was an update which i thought i did. i went on my laptop the next day and it said "itunes was not installed correctly error 7 windows error 998"
    i read a few articles on here but i am having no joy. i uninstalled itunes and reinstalled and that did not work. i also unistalled some other apple things cant remember the names sorry!
    i am not a whiz on a computer so really need some help please!!

    Installing, and uninstalling, applications never touches or removes the data.
    Clean out and uninstall all the apple programs and software thru Programs and manually.
    Might want to use Revo and CCleaner
    I always use manual standalone installers (and keep a couple backup versions)
    itunes 10.5 may affect iTunes media playlists, not sure, depends on what you have.
    A search of these forums will show some threads.
    I'd clean up vista, you need SP2 or later, and specific error message?
    I wonder as you arenot the first with a dell if maybe the OS or included software.
    Security programs like Norton and older versions of Kaspersky have been implicated.
    Also settings in IE that affect pop-ups and plug-ins.

  • Trouble installing shared printer on windows 7 64 bit

    hey guys
    i recently got a IBM thinkpad with Windows 7 Professional 64 bit.
    we have a HP Laserjet 3015 thats shared on windows xp profesional computer.  i am having trouble installing it on my comuter. if i connect the printer to my computer via USB, windows finds the drivers and it works.
    The problem is when ever i try and insatll it over the network it does not work. i can search and find which computer it is attached to and see it in the shared printer list, but when i ever i try to connect to it says connecting>>searching windows update>>cant find drivers. it gives me the option of searching for the drivers to install. i have downloaded the drivers thats on the HP site but they dont help. when ever i select them in the manual it comes with an error saying driver not found then gives u the option of installing it your self. when u select the driver it says windows can not locate a suitable driver.
    how can i get around this ??
    This question was solved.
    View Solution.

    rory2g wrote:
    i recently got a IBM thinkpad with Windows 7 Professional 64 bit.
    we have a HP Laserjet 3015 thats shared on windows xp profesional computer.  i am having trouble installing it on my comuter. if i connect the printer to my computer via USB, windows finds the drivers and it works.
    The problem is when ever i try and insatll it over the network it does not work. i can search and find which computer it is attached to and see it in the shared printer list, but when i ever i try to connect to it says connecting>>searching windows update>>cant find drivers. it gives me the option of searching for the drivers to install. i have downloaded the drivers thats on the HP site but they dont help. when ever i select them in the manual it comes with an error saying driver not found then gives u the option of installing it your self. when u select the driver it says windows can not locate a suitable driver.
    Try the following:  On the Windows 7 computer go to the Devices and Printers folder, Add a Printer, Local Printer, Create a new port, Local port, Next, \\xpcomputername\lj3015 (where you put in the actual share name of the computer and printer), OK, Windows Update (and wait for the list to repopulate), HP Laserjet 3015 PCL5,  Next, Next.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • I'm having trouble instaling a printer driver for my Canon MG5220. I downloaded the latest printer driver from the Canon website (10.67.1.0) and installed it on my Intel iMac. It said the installation was sucessful, but when I try to add a printer, no go.

    I'm having trouble instaling a printer driver for my Canon MG5220. I downloaded the latest printer driver from the Canon website (10.67.1.0) and installed it on my Intel iMac. It said the installation was sucessful, but when I try to add a printer, no go. The printer does'nt show up. I'm fairly new to the Mac, after switching from windows. I'm running Snow Leopard 10.6.8.

    Hold down the option key and select
     ▹ System Information...
    from the menu bar. In the window that opens, select
    Hardware ▹ USB
    from the list on the left. On the right you should now see a list of all connected USB devices, as well as some built-in components. Is the device shown?

  • Trouble Installing Windows 8.1 on Yosemite

    I am having trouble installing Windows 8.1 using the Bootcamp utility on OS X Yosemite. I downloaded the ISO file for 64 bit 8.1 from Microsoft and put it onto an 8gb USB drive using Bootcamp. My Macbook Pro is an early 2011 (MacBookPro8,2) and is currently running OS X 10.10.1. I know that my MBP doesn't usually support booting from a USB, so I modified the info.plist file using the steps outlined in this thread:
    Enable Bootcamp to install from usb for OSX 10.9**WORKS**
    This got it to give me the option to boot from the USB when I held the option key on startup.
    I have tried the following methods for installing with different errors for each:
    1. Installing using Bootcamp created partition
    For this, I went through the normal steps in bootcamp and when I got to the disk partitioning stage, I tried to format the drive 0 partition 4 using the format button. After formatting, it wouldn't allow me to continue because of this error: "Windows cannot be installed to this disk the selcted disk har an MR partition table. On EFI systems, windows can only be installed to GPT disks." This lead me to this thread: Windows can't be installed on Drive 0 Partition 4.. It mentions a difference between EFI v. preUEFI installations, but I don't know how to do a preUEFI installation. Enlighten me anyone?
    2. Creating a "free space" partition with Disk Utility
    For this, I created a free space partition in disk utility and used the Window's installer to format the partition. This allows me to get to the very end of installation, but I get the error message: "Windows could not update the computer's boot configuration. Installation cannot proceed."
    BTW, FileVault is turned off.
    Any help would be much appreciated!

    Hi mgallego,
    Which step did the error start to occur ?Have you tried to install it again to have a check ?As the information stated, we can restart the machine to have a check.
    Here is a link for reference of the requirements of the Windows 8.1 .
    System requirements
    http://windows.microsoft.com/en-HK/windows-8/system-requirements
    There may be a hardware issue here, it is also recommended to look for help from the manufacturer for help.
    Best regards
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • I am having trouble installing itunes on my computer. The error says, "Service Apple mobile device failed to start. verify that you have sufficient privileges to start system requirements." this is my home PC.

    I am having trouble installing itunes on my computer. The error says, "service apple mobile device failed to start. Verify that you have sufficient privileges to start system requirements." this is my home PC.

    Hi Iss9243,
    Welcome to the Support Communities!
    You've already tried some great troubleshooting steps, but the article below gives you quite a few more for this issue.  Hope it helps ....
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/TS5376
    Cheers,
    - Judy

Maybe you are looking for