Trouble installing upgrade for iTunes in Windows 7

I can't seem to upgrade iTunes on my new Windows 7 laptop. I was successful installing it when I originally setup my new laptop a couple months ago and have no issues running the program itself but whenever it prompts me to upgrade to the latest version and it starts installing a dialog box pops up that reads:
The installer encountered errors before iTunes could be configured.
Errors occurred during installation.Your system has not been modified.
Please run the installer again, or click Finish to exit.
Please help. Thanks in advance.
-Curtisdk99

Try the latest Catalyst drivers from AMD then:
http://game.amd.com/us-en/drivers_catalyst.aspx
Quote
the download has a "utility", for want of a better description, where you can tweak the settings so assume the Win 7 download does the same.
You mean the 'Catalyst Control Center'

Similar Messages

HT1926 I am having trouble installing 64-bit iTunes on Windows 7 64-bit.

Initially the program installed except for the Apple Mobile Device service and SOftware Updater service. Tried a complete uninstall and reinstall. Now, it aborts in mid-install. Seems to be related to permisions. Suggestions?

http://helpx.adobe.com/creative-suite/kb/error-1603-fatal-error-occurred-1.html
http://helpx.adobe.com/creative-suite/kb/errors-exit-code-6-exit.html
Mylenium

How to install update for iTunes on windows vista

I Just got an iPhone 5s and when I pulled my phone into my computer it's says I have to update my iTunes in order to get to my iphone through iTunes and the update comes up for iturns 12.0.1 but everytime its goes to update it says there was an error. Please help I don't want to have to delete iTunes and reinstall it because I'm afraid of losing all my content.

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2

Trouble installing extensions for cs4 on windows 8

Why does the extension manager say that it can't find the installation file after I downloaded it? I'm running windows 8 and I've opened both dreamweaver and the extension manager in administrator mode.

When I select the file with the extension manager it claims that it can't find it.

Just installed the latest upgrade for iTunes. Cannot open iTunes store?

Just installed the latest upgrade for iTunes. Cannot open iTunes store?

Hey there Ray Neilson,
It sounds like you are able to open iTunes but cannot access the store. I recommend the troubleshooting from the article named:
Can't connect to the iTunes Store
http://support.apple.com/kb/ts1368
Troubleshoot issues in Windows
If you haven't been able to connect to the iTunes Store for more than a day (and other customers on our discussion boards aren't experiencing similar issues) a software or Internet service provider (ISP) configuration issue may be blocking your access to the iTunes Store. Find out which ports and servers need to be allowed for iTunes Store access.
Update iTunes to the latest version.
If iTunes Store appears empty and only displays the message iTunes Store, follow these steps.
Try the steps to troubleshoot iTunes Store connectivity in Windows.
As with all firewalls not manufactured by Apple, you may need to configure Windows Firewall to allow iTunes to access the iTunes Store. Follow these steps for Windows XP, Windows Vista, and Windows 7.
Try disabling any proxies built-in to Windows. You should avoid proxies because they can cause issues.
If you're receiving a specific error message, follow these steps.
If the issue still persists, contact your Internet service provider and confirm that these ports and servers are enabled over your network.
Note: The hosts file may be blocking the iTunes Store.Microsoft's article How do I reset the hosts file back to the default? has instructions and a FixIt to have Windows try to reset the hosts defaults for you.Note: Some workplaces may put internal resources in the hosts file and may block iTunes Store. The FixIt doesn't work for Windows 8.To create a copy of your hosts file and replace it with an empty hosts file, follow the instructions below:
You can find the hosts file at: C:\WINDOWS\SYSTEM32\DRIVERS\ETC.
Select the hosts file. There should now be a duplicate of the hosts file named "Copy of hosts" (Windows XP) or "hosts-copy" (Windows Vista, Windows 7, or Windows 8).
Drag the original hosts file to your desktop.
Right-click the duplicate file and choose Open. You may be prompted to choose the program you want to use to open this file. Double-click Notepad.
When Notepad opens, choose Edit > Select All.
Choose Edit > Delete.
Choose File > Save.
Close Notepad.
Right-click the duplicate file, and choose Rename.
Type "hosts" (without quotation marks) and press Enter.
Restart your computer and try connecting to the iTunes Store.
If you still can't connect to the iTunes Store, your security software or firewall may be blocking the ability of iTunes to communicate with the Internet. Learn how to resolve security software issues.
If the issue persists, try the troubleshooting in this article:
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/TS3297
Thank you for using Apple Support Communities.
All the very best,
Sterling

Errors occurred while installing updates for iTunes 11.1.4 on Windows VISTA

I receive the message "errors occurred while installing updates" for iTunes 11.1.4 on Windows VISTA. What is the fix

Hey applequilt,
Thanks for the question. I understand that you are experiencing issues with iTunes for Windows. The following resource may provide a solution:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Thanks,
Matt M.

I could not install the upgrade for iTunes and Error message said "can't start because MSVCR80.dll is missing" Reinstallling has not helped. Is it Apple's fault?

I could not install the upgrade for iTunes and Error Message said " Can't start because MSVCR80.dll is missing". Reinstalling has NOT helped. . Is the fault with the Apple iTunes upgrade?

Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.

Issue installing/upgrading to ITunes 10.6.1.7

Im having an Issue installing/upgrading to iTunes 10.6.1.7 When upgrading it would not istall and tell me to go to Tools>Download manual. I also had an issue with my IPod touch not showing up in iTuens all of a sudden. So figuring the two problems were related I uninstalled iTunes (cleaned my itues folder in my C drive also) with hopes installing it fresh would work and now when I install 10.6.1.7 I get the following in a pop-up window "The installer encountered errors before iTunes could be configured. Errors occurred during installation. Your system has not been modified. Please run the installer again, or click Finish to exit."
Anyone know what the issue is?

Try the following steps:
1. Go to Microsoft website to fix install and Unistall problems. Click "Run now" from Fix it to remove all iTunes & related installer files:
http://support.microsoft.com/mats/Program_Install_and_Uninstall
Be aware that Windows Installer CleanUp Utility will not remove the actual program from your computer. However, it will remove the installation files so that you can start the installation, upgrade, or uninstall over.
2. You should remove all instances of iTunes and the rest of the components listed below:
it may be necessary to remove all traces of iTunes, QuickTime, and related software components from your computer before reinstalling iTunes.
Use the Control Panel to uninstall iTunes and related software components in the following order:
iTunes
QuickTime
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support
Follow the instructions from Apple article listed here: http://support.apple.com/kb/HT1923 to remove all components
3. Reboot your computer. Next, download iTunes from here:http://www.apple.com/itunes/download/ and install from scratch

HT1386 Since installing the latest itunes to windows 8 my iphone and ipod touch is not being recognized in itune

Since installing the latest itunes to windows 8 my iphone and ipod touch is not being recognized in itunes, therefore i can't change playlists or add songs etc. Is this a fault with itunes as it was fine with the older version or is there something i can do. I'm not on IOS yet but would like to backup my phone first but can't do that atm due to not being able to view my phone on itunes!
Thanks

Hi, jodie_0182.
I would recommend the steps in the article below. See the section labeled Verify that the Apple Mobile Device USB Driver is installed > For Windows Vista, Windows 7, and Windows 8 > Update the Apple Mobile Device Driver.
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
If the above step does not resolve the issue, try all remaining steps in the article.
Cheers,
Jason H.

TS1363 Just installed the new ITunes (running Windows 7) and now it cant see my IPhone

Just installed the new ITunes (running Windows 7) and now it cant see my IPhone (which it saw fine just a few minutes ago). So I can't do a backup etc. What's wrong and how do I put it right?

Well, without my doing anything, the situation has now righted itself. I came down this morning, switched on the computer and the IPhone - and now ITunes recognises the IPhone (it is listed under "Devices", which it wasn't before)
I notice however that the IPhone doesn't get listed under "Devices" until the backup process is complete. So maybe this points to what may have been going on before? Except that the reason I was worried was because the first thing I wanted to do after dowloading the new version of ITunes is make a backup - and I couldn't because ITunes didn't "see" the phone.
Anyway, not the first time I have had the eerie feeling that my relationship with IWorld is not in my control.

I am having troubles installing applications from itunes and apple stores

I am having troubles installing applications from itunes and apple stores.

What have you tried? What happened? What troubleshooting have
you done?
If there was an error message, what is the exact, complete wording of that
error message?
You need to provide some more details of what your problem is so someone
can offer a solution.

Hi, i installed an upgrade for itunes on my windows computer it came with a error message of msvcr80.dll

Hi
I installed a upgrade of itunes on my windows computer
It came up with error message of msvcr80.dll I went to repair and to reinstall itunes but this didnt fix it
Please help me

Uninstall your existing copy of iTunes. Delete any copies of the iTunesSetup.exe (or iTunes64Setup.exe) installer files from your downloads areas for your web browsers and download a fresh copy of the iTunes installer from the Apple website:
http://www.apple.com/itunes/download/
(The current build of the 11.1.4.62 installer was changed a few days ago, which fixed the bulk of the reports of MSVCR80.dll/R6034/APSDaemon.exe/Error-7/AMDS-could-not-start trouble ... but the build number on the installer was not changed. So we're trying to make sure you do the reinstall using a "new good" 11.1.4.62 installer instead of an "old bad".)
Does the install with the new copy of the installer go through properly? If so, does that clear up the error message?
If you still have the same error messages cropping up, then try the procedures from the following user tip:
Troubleshooting issues with iTunes for Windows updates

HT1926 can't install quicktime or itunes on windows 7 get the error message There is a problem with the windows installer package. A program required for this install to complete could not be run

please help. Can't install quictime player or itunes on windows 7. Get the error message There is a problem with the windows installer package. A program required for this install to complete could not be run. Have followed all the steps suggested and still no luck.

thank you for trying to help. I do not have apple software update on my computer. I have tried to install several programs so i could install it but every installation will not finish and rolls back and says no changes were made to my computer so i can't install the update. I even tried to force install as administrator but nothing works. Any help would be greatly appreciated. I have windows 7 64 bit.

I installed update for itunes now im getting error 7( windows error 126)

i installed update to itunes on my cp and now it wont open and i"m getting a error 7 (windows error 126) not installed because cannot locate msvcr80 dll.

Try these Discussions...
https://discussions.apple.com/message/24687597#24687597
https://discussions.apple.com/docs/DOC-6562

Launch error for iTunes on Windows 7

I recently installed the latest update for iTunes on my PC and when I attempted to launch I received an error stating that one of the .dlls "is either not designed to run on Wondows or it contains an error. Try installing the program again using the original installation media or contact your system administrator or the software vendor for support." I tried downloading and reinstalling iTunes and also removing and then reinstalling but received the same error. I recently upgraded my PC from Vista to Windows 7 and wonder if it is related to the problem.

Many thanks.
Taken at face value, you're having trouble with an Apple Application Support program file there. (Apple Application Support is where single copies of program files used by multiple different Apple programs are kept.)
Let's try something relatively simple first. Restart the PC. If you're using Vista or 7,now head into your Uninstall a program control panel, select "Apple Application Support" and then click "Repair". If you're using XP, head into your Add or Remove Programs control panel, select "Apple Application Support", click "Change" and then click "Repair".
If no joy after that, try the more rigorous uninstall/reinstall procedure from the following post. (If you've got XP, although the procedure is for Vista and 7, just read "Computer" as "My Computer", read "Uninstall a program control panel" as "Add or Remove programs control panel" and assume the system is 32-bit, and you'll be doing the right things.)
Re: I recently updated to vista service pack 2 and I updated to itunes 10.2.1 and ever

Trouble installing upgrade for iTunes in Windows 7

Similar Messages

Maybe you are looking for