Trouble installing Windows 7, 64bit

Hello, I have a Macbook Pro, 15 in. and I have the model that will allow for the 64 bit version.
This is my first time using Bootcamp, so I don't have any version of XP already installed.
I've used the bootcamp installer, and everything goes fine except when Windows needs to extract files. It stays at 0% for about 5-10 minutes and then comes up with an error, saying that the files are corrupt.
Now, whenever I try to run the windows installer again, the screen turns black and tells me to press any key to boot CD or DVD. However, none of the keys on my keyboard work.
I really don't understand how I'm supposed to get this to work.
Thanks.

Hi and welcome to Discussions,
using the BootCamp Assistant again should give you the option to remove the made Windows partition and revert back to one OSX volume.
After that's done a reboot of your Mac might be advisable.
After the reboot use the BootCamp Assistant again to make the Windows partition and then install Windows again.
Read carefully through the BootCamp Installation Guide to be found here http://www.apple.com/support/bootcamp/
If the above does now work, try this:
1) boot your Mac from your OSX install DVD
2) choose your language and then 'ignore' (cancel) the installation
3) from the Top Menu (Utilities) start Disk Utility (DU)
4) in DU click on your harddisk (not any partition) in the left pane (the first item listed)
5) in the right pane use the 'Partition'-Tab
6) click to highlight on the ex-Windows partition you want to delete
7) click on the small '-' Button at the bottom
That should delete your former Windows partition
After that's done successfully
8) Drag the partition separator line until it encompasses the entire drive and then select apply.
9) Quit Disk Utility
10) reboot your Mac from your harddisk.
Since you are 'fumbling' with your OSX partition you should consider having/making a backup of it before trying the a.m. procedure. Just in case.
Is the Windows 7 DVD you use a bought one or you that you downloaded legally ?
Also make sure that it is not a manufacturer-bundled version !
Regards
Stefan

Similar Messages

  • The keyboard and trackpad on MacBook Air (13-inch, Mid 2013) computers may stop functioning at the Personalize step when installing Windows 7 64bit

    The keyboard and trackpad on MacBook Air (13-inch, Mid 2013) computers may stop functioning at the Personalize step when installing Windows 7 64bit.

    1. Reset PRAM.  http://support.apple.com/kb/PH4405
    2. Reset SMC.     http://support.apple.com/kb/HT3964
        Choose the method for:
        "Resetting SMC on portables with a battery you should not remove on your own".
    If this does not help, contact Apple.

  • I am going to buy either a Mac Air or Mac Pro Retina 8GB RAM and 256GB. And as I have to still run Windows I will install Parallels 9. As the Mac are both 64bit machines does that mean I need to install Windows 7 64bit ? And office pro 2013 64 bit too?

    I am going to buy either a Mac Air or Mac Pro Retina 8GB RAM and 256GB. And as I have to still run Windows programs I will install Parallels 9. As the Mac are both 64bit machines does that mean I need to install Windows 7 64bit or just install 32 bit? (Going with Win7 as I hate Win8). And I will install Office Pro 2013 64 bit too or 32 bit or is that automatically selected by the underlying OS (I use Word, Excel and Access mainly for a membership database of a local club) ? I am not a power user so would appreciate advice on way to go

    Again thank you.  If I only use word, excel and access in the Win environment and Mac OS for email and safari for internet do I need anti virus software . Ie my connection to the world is mac only and I use office pro only to ruin the club, newsletters, membership database etc. and of course anything I do there can drag/drop to the mac environ to email.  That's my understanding anyway.  Next will my existing .pst file copy directly into mac mail or do I have to runs translator  as I recall reading something about that ages ago when I started thinking Mac

  • I have instaled Windows 7 64bit Enterprise edition and installed the lastest version of Firefox and it freezes every time i launch it. Please help me.

    I have instaled Windows 7 64bit Enterprise edition and installed the lastest version of Firefox and it freezes every time i launch it. Please help me.
    4d4aae27-34ee-4620-b349-c03002813b2003-Jan-1312:30 AM
    54e24e0e-dfc4-466b-a347-4bd95536773e03-Jan-1312:30 AM
    22d351d2-6461-4f33-9fbd-6d31f769e73103-Jan-1312:30 AM
    8a8da99b-335e-43bb-aa12-4634aa0b431003-Jan-1312:30 AM
    a15bb095-aeb9-44e1-a79c-1a17cee207d503-Jan-1312:28 AM

    None if these crash reports seem to have been send.
    Do you have crash reports with a "bp-" prefix that were submitted and that show a crashing thread?
    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
    *Do not click the Reset button on the Safe mode start window or otherwise make changes.
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
    You can use one of these to start Firefox in <u>Safe mode</u>:
    *On Windows, hold down the Shift key while starting Firefox with a double-click on the Firefox desktop shortcut
    *On Mac, hold down the Options key while starting Firefox
    See also:
    *http://kb.mozillazine.org/Firefox_crashes
    *https://support.mozilla.org/kb/Firefox+crashes

  • Satellite A500 - Can I install Windows 7 64bit?

    I first bought a Satellite A500 with 4Gb RAM just over 3 months ago with Windows 7 64 bit Home Premium installed. At first I had the initial dramas with finding 64 bit drivers etc then it ran OK for a while. After about 2 & a half months I started getting BSODs with error message related to an nvidia .sys file. After a few weeks of this, updating latest drivers etc, and a number of unsuccessful attempts to diagnose the problem, it was occuring every time I used the laptop and to top it off the touchpad finally died as well. The company I purchased from gave me a replacement laptop.
    The new system is also a Satellite A500 and although it has a different model number and faster CPU it is otherwise virtually identical to the the one I had previously with 4Gb RAM and the same nvidia graphics card. However for some reason Windows 7 32 bit has been pre-installed. I'm not sure why the company didn't install 64 bit. A call to the tech dept with the question resulted in the answer "better for you", meaning 32 bit is better for me.
    My laptop is 64 bit capable. I know that when running the 32 bit version it only utilizes up to 3.2Gb of the installed RAM (my system says that 2.99Gb is useable - assume rest is allocated to graphics?) but I've read a post where the poster said that he/she found running 32 bit Win 7 was actually faster than the 64 bit version, even tho it wasn't utilizing all the RAM.
    *Can someone tell me if I am better off running the 32 bit version of Windows 7 rather than the 64 bit version?*
    *If I am better off with 64 bit, can I upgrade to 64 bit or do I have to do a complete reinstall?* No installation disks were supplied. Presume setup files are on hidden partition.
    Although I haven't had any BSODs with this new laptop, I have had a couple of occurences where the system has frozen temporarily with the messge "Your display driver has stopped working" followed by a recovery. Is this a Toshiba, nvidia or Windows 7 thing? I've read quite a few other posts from people with similar laptops to mine who've had the same Toshiba/nvidia errors but no resolutions. *If there is going to be a problem with this graphics card, am I better off with 32 bit or 64 bit Windows 7?*
    Any advice would be muchly appreciated.

    Hi chrissy_h,
    I have to say that there is no performance difference between 32bit and 64bit. The only important point is that 4GB RAM or more can only be used on 64bit system. As you wrote, 32bit OS can only handle up to 3.2GB but not more.
    I think 32bit OS has a better compatibility to older applications so its preinstalled. Furthermore for the most applications 3.2GB RAM is enough and normally you dont need more.
    Theoretically you can install Windows 7 64bit but dont forget that there is no upgrade option. You have to make a new and clean installation of the whole system.
    Furthermore you need a Windows 7 64bit disk from Microsoft with license key. This can be purchased from every computer shop I think.
    Last but not least check the Toshiba website. There you can find all available downloads for your notebook. :)

  • Trouble Installing Windows 8.1 on Yosemite

    I am having trouble installing Windows 8.1 using the Bootcamp utility on OS X Yosemite. I downloaded the ISO file for 64 bit 8.1 from Microsoft and put it onto an 8gb USB drive using Bootcamp. My Macbook Pro is an early 2011 (MacBookPro8,2) and is currently running OS X 10.10.1. I know that my MBP doesn't usually support booting from a USB, so I modified the info.plist file using the steps outlined in this thread:
    Enable Bootcamp to install from usb for OSX 10.9**WORKS**
    This got it to give me the option to boot from the USB when I held the option key on startup.
    I have tried the following methods for installing with different errors for each:
    1. Installing using Bootcamp created partition
    For this, I went through the normal steps in bootcamp and when I got to the disk partitioning stage, I tried to format the drive 0 partition 4 using the format button. After formatting, it wouldn't allow me to continue because of this error: "Windows cannot be installed to this disk the selcted disk har an MR partition table. On EFI systems, windows can only be installed to GPT disks." This lead me to this thread: Windows can't be installed on Drive 0 Partition 4.. It mentions a difference between EFI v. preUEFI installations, but I don't know how to do a preUEFI installation. Enlighten me anyone?
    2. Creating a "free space" partition with Disk Utility
    For this, I created a free space partition in disk utility and used the Window's installer to format the partition. This allows me to get to the very end of installation, but I get the error message: "Windows could not update the computer's boot configuration. Installation cannot proceed."
    BTW, FileVault is turned off.
    Any help would be much appreciated!

    Hi mgallego,
    Which step did the error start to occur ?Have you tried to install it again to have a check ?As the information stated, we can restart the machine to have a check.
    Here is a link for reference of the requirements of the Windows 8.1 .
    System requirements
    http://windows.microsoft.com/en-HK/windows-8/system-requirements
    There may be a hardware issue here, it is also recommended to look for help from the manufacturer for help.
    Best regards
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • MacBook Pro Retina won't install windows 7 64bit

    Hi guys, i'm tryng to install windows 7 64bit but no success till now. I'm using an updated version ( service pack 1 integrated) when windows loads i can't install it on the bootcamp partition because it says"windows needs an ntfs partition to install" . Then i cancel that partition, create one new ntfs one, and try to install.... then windows tells me "Impossible to create a new system partition or locate an existing system partition. For further information, look at the program's registry files"
    It seems to be an error caused by a defective driver of the controller of the hard disk.... so the controller of the ssd. Or is it something else? how can i install windows via bootcamp on the new macbook pro with retina display?

    you format the FAT/MSDOS to NTFS inside the Windows installer.
    Windows installer: Advanced Options tab.
    You don't create, you just use the one "BOOTCAMP" that was created by Boot Camp Assistant.
    http://manuals.info.apple.com/en_US/boot_camp_install-setup_10.7.pdf
    create a Windows support software (drivers) CD or USB storage media
    http://support.apple.com/kb/HT4407
    The Boot Camp Assistant can burn Boot Camp software (drivers) to a DVD or copy it to a USB storage device, such as a flash drive or hard drive. These are the only media you can use to install Boot Camp software.
    https://support.apple.com/kb/HT4569
    Installation Guide  Instructions for all features and settings.
    Boot Camp 4.0 FAQ  Get answers to commonly asked Boot Camp questions.
    Windows 7 FAQ  Answers to commonly asked Windows 7 questions.
    http://www.apple.com/support/bootcamp/

  • Install windows 8 64bit on 64bit architecture tablet(acer iconia w4-820) by removing the preloaded 32bit windows 8.1 or dual boot

    Hi,
    I need to install windows 8 64bit on a 64bit architecture Tablet(acer iconia w4-820) by removing the preloaded 32bit windows 8.1 or should make it as dual boot. For a project purpose.
    I tried booting the tablet from windows 8 64bit DVD for installation but it does't even detect the DVD Drive. when i insert the recovery DVD which came with acer it gets detected. 
    The windows 8 64bit DVD which am trying to install is volume licensed which we use to install on our laptops. That works fine with Laptops.
    Is their any different version of windows 8 do i need to try for installing on Tablet(acer iconia w4-820) or where am i going wrong.
    Thank for your help. 

    SM
    DISCLAIMER.  I would contact Acer about this to be safe, but if you only have one HD in the tablet you are going to have to do a clean install by formatting the HD.  You cant run 64 bit & 32 bit on the same drive AFAIK.
    Wanikiya and Dyami--Team Zigzag

  • ERROE ID 0X80070570 when install windows 7 64bit enterprise !

    My computer is HP CQ45-203TX know install vista ultimate 32bit. Today I install windows 7 64bit enterprise
    when expanding system at 80% " ERROE 0X80070570 "  occur ? 
    what can i do to install windows 7 64bit enterprise ?

    It appears the DVD disc you have is missing files and/or is corrupt.  Contact your IT administrator in charge for assistance.
    Carey Frisch
    Microsoft MVP
    Windows Expert - Consumer

  • Found "A required CD/DVD drive device driver is missing" when installing Window 7 64bit.

    Hello,
    I just bought X220i with Core i-3, ram 8G. When I tried to install Window 7 64bit (Coz of Ram 8G), I got the message “A required CD/DVD drive device driver is missing...”. I did browse the driver (using USB 3 Driver) but, it didn't work.
    Any idea to resolve?
    Thanks in advance.
    Solved!
    Go to Solution.

    What media are you using to install win 7?  USB DVD drive, flash drive, ???  Downloaded ISO or Lenovo or Microsoft DVD?
    One reason (of many) you can get this error message is bad media - corrupt download, bad burn, defective flash or optical media.  I've also heard of problems with USB ports causing this.  If you're using USB media, have you tried another port?
    And as NINE asked, when in the process do you get this error?
    Z.
    The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc.  The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество

  • Cs12 trial not responding when installed, windows 7 64bit...how to fix??

    cs12 trial not responding when installed, windows 7 64bit...how to fix??
    Not a very good recommendation for buying the app!!!!
    Does anyone at Adobe follow these questions???  If so please respond (your app will not!!)

    Hi wcarlstrom,
    Adobe CS12 is unheard of. Adobe Creative Suite's latest version is CS6.
    Please be specific as to what software you are trying to install, OS version etc so that I may be able to help you.

  • Satellite A100-011 - Can I install Windows 7 64bit?

    Can you please tell me if I install Windows 7 64bit where I can find drivers, because they are not listed on Toshiba site.
    Thanx.
    Akis

    Old notebook models are not supported for all operating system versions so you will not find these drivers on Toshiba support page.
    What you can try is to search them on hardware manufacturers pages but I don't think you will find all of them.
    You must also understand that new operating system is designed to run with newest hardware and it is always problematic to use newest OS with old hardware.
    What you can also try is to check if some Satellite A200 has the same hardware and if A200 is supported for Win7 64bit you can use these drivers and try to install them on your A100.

  • Want to install windows 7 64bit only partitioned for 20mb in bootcamp can i increase bootcamp partition before installing?

    Want to install windows 7 64bit only partitioned for 20mb in bootcamp can i increase bootcamp partition before installing?

    Yeah, just open Boot Camp Assistant, restore the hard drive to a single partition and then redo the partitions again. You should have a bare minimum of about 50GB as @The hatter said. You might want to just divide equally, that's usually the easiest thing to do.

  • Having trouble installing windows 7 with Parallels

    I am having trouble installing windows 7 with Parallels, i keep getting the following message: There is no operating system installed in this virtual machine. Please insert an operating system installation CD into the optical drive of your Mac and restart. Any thoughts?

    I would post in the Parallels forums.

  • Tecra S10-176 - Can I install Windows 7 64bit?

    Hi to everyone,
    I am new to this forum. I have just bought a Tecra S10-176 with Vista Business 32 bit and I could upgrade to Windows 7 Professional 32 bit paying 29 euros.
    However, I am tempted to buy an OM licence for Windows 7 Professional at 64 bit. From the support centre(s) of Toshiba (Italy) I did not receive any clear indication about the performances of the Tecra S10-176 with the 64 bit version of Windows 7 Professional. Can somebody tell me if it is (or it is not) a bad idea to install the 64 bit version on my Tecra S10-176?
    Thanks,
    Marco

    Hi
    Theoretically you can install what you want on your notebook. Its yours! ;)
    And I dont understand why you think that Windows 7 64bit wouldnt be a good idea.
    I have checked the Toshiba page for Windows 7 64bit drivers and it seems that all of them are available. That means you would get every driver there! :)

Maybe you are looking for

  • HP Deskjet 9600 Won't Print with 10.4.11 & Find function doesn't work.

    Hi, there seems to be some link between the find function not working and HP printers not working in Tiger. I read this forum - http://209.85.215.104/search?q=cache:-v3OvLGNYBwJ:forums.cnet.com/5208-6126_102- 0.html%3FforumID%3D10%26threadID%3D271686

  • ICloud with Windows 7 and Outlook 2013

    I have Icloud and Outlook 2013 working with Windows 8 but I cant get it to sync contacts and calendars on Windows 7. I keep getting a message about no default profile  in Outlook. Can anyone help please? Regards, Roger

  • Stock transfer without delviery

    Hi In which  scenario we  use stock transfer with out delviery. Can we use this process for both Intercompany and Intracompany STOs. Thanks& Regards Jyoti

  • Extracting portions of a sequence

    New to Premiere Pro.  Using Lynda.com and classroom in a book to learn. I have a large single .AVI file (2 hours) I want to break it into multiple .AVI files as each portion is different subject so I can name the files ABC.avi DEF.avi for later use. 

  • [Concurrency] SecurityError when attempting to access a file from a worker

    I was working on encrypting some files in a worker using AIR, when I ran into this strange error... SecurityError #0 - file at FileWorker/onChannelMessage()[/Users/axon/Projects/Flash/WorkerFile/src/FileWorker.as:32]           at flash.system::Messag