Trouble locating and using the automatic document feeder in HP M1522nf printer

I have HP M1522nf and simply want to know how to use the automatic tray. When I set a label in the tray, the printer still copies from the paper tray below and doesn't use the paper tray.

I have the same problem.  Did you get a resolution?

Similar Messages

  • What does the automatic document feeder tray do?how to use it in hp photosmart 7510

    wht is the automatic document feeder tray for? how to use it?

    The ADF is used to automatically feed a number of pages for scanning, copying or faxing.  Paper is loaded into the ADF with the printed side facing up.  When you then copy (or scan or fax) the pages will be automatically pulled into the scanner mechanism one at a time and then deposited in the output tray. 
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • I have a message saying there is a jam in the automatic document feeder even though there is no pape

    I have an HP Color Laserjet CM2320fxi MFP. The message is "document jam - open auto sheet feeder door and clear", but there is no paper. I have even disconnected the scanner unit and still getting the same message. Is this a software issue and can the machine be software reset? I have done the screen reset without success. I don't think a replacement lid with document feeder would resolve the issue. Thanks

    TimCW1,
    Here is a link to a document about the Automatic Document Feeder for your printer. It deals with the specific error message you are getting. Let us know if this helps or if you still have the issue.
    http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&taskId=110&prodSeriesId=...
    If I helped you at all it would be great if you clicked the blue kudos star!
    If I solved your post please mark it as solved to help others.
    I'm a printer tech with HP.

  • Photosmart 7525 won\'t pick up paper from the Automatic Document Feeder

    Just bought this printer from Costco. The Automatic Document Feeder won't work. Chime indicates that paper is inserted, but there is no pickup. 1 page or more, won't pull paper through.

    Sorry that you are experiencing an issue with the ADF.  Sometimes it may need cleaning or rollers need wiped. I understand with this being a new printer, you should not have those problems.  Here is a link that may assist you with that issue. http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01728503&cc=us&dlc=en&lc=en&product=5286643&tmp_track_link=ot_search Let me know if this helps. 

  • Error message "Reload original in the automatic document feeder (ADF) and try again."

    My all-in-one HP Officejet 8600 plus continues to get the subject error message whether I use the document feeder or scan on the glass. It started right after a document pulled in sideways in the document feeder and got caught. I was able to pull it out complete. It did not tear or shred, just crinkled up. I can still get a copy made from the document scanner, but not one from the scanner bed. When scanning from the document feeder to the PC, this message prevents me from getting the document on the PC. I do a lot of scanning and need this feature to work. When scanning from the glass bed, this message prevents me from getting the copy. 
    I have cleaned all the rollers, scanner bed, and anything that I could see. I have checked all places on the top, inside the document feeder, in between the rollers, under the document feeder, also in the rollers, inside the cartridge compartment, and in the back collating department for any clogs and/or pieces of paper or debris. There is none. I have made sure the printer was reset to factory defaults. I also unplugged the printer cord from the printer and wall socket and let stand for at least 60 seconds to be sure there was a proper reset this way. And one other thing I checked was to be sure that I could not reset the printer in any way from my PC which I could not. As you can see, I checked everything that I could but to no avail.
    My warranty ran out 1 1/2 months ago and I cannot afford to buy another printer since everything else seems to be working great. Can anyone give me something else to look at that will fix this problem? Oh, before I forget, I can still print from the PC just find, I just cannot get document to show up on PC because this error prevents me. Thank you very much for any suggestions.

    I have the same problem.  Did you get a resolution?

  • I'm trying to use my older Acrobat 4 for printing files from an older Macintosh with system 9, so that I can store and use the pdf documents in a newer MacBook Air, with OSX 10.9.  Acrobat 4 worked previously but no longer works.  Any way to fix it?

    I am trying to transfer older files from a Mac PowerBook G4, running system 9, printing those documents as pdf, using Acrobat 4.  Then those pdf documents will transfer to my newer MacBook Air, running OSX 10, allowing me to store and use them.  My problem is that Acrobat 4 no longer seems to work on the old Mac, and I don't know how to fix it.  Can anyone give me some suggestions?

    You never know, someone might remember. What happens in detail when you try to use it, and HOW are you trying to use it?

  • LaserJet Pro 300 color MFP automatic document feeder - page stops feeding with 1" to go

    Scan page won't finish feeding when using the automatic document feeder.  Leaves approximately the last 1 to 2 inches of paper in the scanner. The Scan ADF Paper Jam error message pops up.  Seems like the page hangs/gets stuck  once the page passes through the document feeder roller assembly.  Haven't been able to find any information on what moves the paper through the scanner once it gets past this roller assembly. 

    @Debbie-M 
    ‎Thank you for using HP Support Forum. I have brought your issue to the appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post ( serial numbers and case details).
    If you are unfamiliar with the Forum's private messaging please click here to learn more.
    Thank you,
    Omar
    I Work for HP

  • Photosmart 7510 Automatic Document Feeder. will it copy a doublesided odd size?

    I have a Photosmart 7510 .  I have never used the Automatic Document Feeder and could not find anywhere online how to use it.  I want to know if I can put in a 5 1/2 x 5 1/2 picture from a funeral and have it copy both sides so it will look like a card.. all on one like the original.
    This question was solved.
    View Solution.

    specifications
    Hi grammafaith,
    For copying the size that you want through the ADF is not support. According to the specifications the largest photo tray size is 5x7, and using the main ADF would cause a paper jam.
    I have included the document here for 'Copying a Multipage Original'. I have tried steps on the 7510 that I do have and was able to successfully copy on both sided.
    I have also included those steps here for you.
    1) Place the item on the scanner glass
    2) Press the Copy button
    3) Press the Settings button in the bottom left
    4) Make sure that 2 sided copy is turned ON
    5) Press Start
    6) Follow the on screen instructions of loading the second page/ or flip the paper over and continue
    Please let me know if this has successfully worked for you, thank you.
    I worked on behalf of HP

  • Printing problems when using automatic document feeder (HP Photosmart 309C)

    When I print using the normal paper trays, everything comes out fine.  However, when I feed a document through the automatic document feeder, it comes out with four vertical lines running down the page.  I have tried cleaning the rollers, but that has not worked.  Anyone have any ideas/solutions?  Thanks in advance, Jack.

    When I print using the normal paper trays, everything comes out fine.  However, when I feed a document through the automatic document feeder, it comes out with four vertical lines running down the page.  I have tried cleaning the rollers, but that has not worked. 
    I see that this post was made in June of 2010, but there was no reply. I found the solution elsewhere:
    Lift the scanner lid. You will see the main glass and a small glass about the width of a ruler. There are a couple of dots of debris on that small glass. Line up the lines to find them and clean with a bit of glass cleaner on a rag or napkin. The reason a small dot makes a line is the paper passes by the scanner with adf rather than the scanner passing by the paper on flatbed scans.

  • Acrobat 10 not Scanning all Pages from ADF (Automatic Document Feeder)

    Acrobat 10 does not scan all of the pages from the Automatic Document Feeder from an attached scanner, and only scans some of the pages. The ADF works fine with the built-in Windows 7 Scan and Fax, as well as with HP's software, but it just won't work with Adobe Acrobat for whatever reason. The scanners that we are using are brand new, and the model is: LaserJet Pro 200 color MFP M276mw. The issue has been duplicated on four computers and two scanners, in a Windows 7 x64 Enterprise environment. A video of the exact problem can be found here: http://uncoolcat.com/work/LaserJet_Pro_200_Color_M276.mp4
    Would somebody be able to help us resolve this issue?

    Hi Varinder,
    Thank you for the suggestion! We wound up figuring out a way to make their "full feature" software (which does include the TWAIN drivers) install mostly silently, and install only if they've connected the device locally to their computer, as noted in the other post that was submitted a few minutes ago. I really appreciate all of the help that you’ve given us!
    In order to duplicate the WIA driver issue, use only the “HP LaserJet Pro 200 Color M276 PCL6 Print Driver (no installer)” (LJ-Pro-200-color-MFP-M276-driver-only-13170.exe) driver package. This driver only package doesn’t appear to have any of the files you mentioned in your previous post in the Scan_App folder for the TWAIN functionality (but those files are available in the “full feature” setup). We copied the entire “driver-only” folder to our plug and play driver folder, and the drivers automatically install. Once they get installed, there isn’t a TWAIN option anywhere to be found in any scanning application, just the WIA driver as far as I can tell. Adobe Acrobat 10 when using the ADF then skips some pages when scanning.
    However, now that you’ve found the install files for the TWAIN driver for the scanner, this should be a non-issue for people as they can just install those and use TWAIN instead, so thank you!
    Also, I find it rather amusing that you were able to help us with what appears to be an HP issue far better and faster than HP did or could. We spoke with seven people at HP, and not a single one of them pointed us in any useful direction or provide us with any useful information on the matter; had we followed any of their advice we would have lost countless hours (one person suggested taking the scanners apart and thoroughly cleaning the rollers, even though it was clearly stated they work fine from a hardware perspective with the full feature software installed and that they are brand new). So anyway, thank you. If you require anything else from us, let me know.

  • Which multifunction Laser printer (MFP) for Lion? - need multipage scanning through automatic document feeder

    Hi all,
    I'd love to get your advice on what MFP laser printer to buy.
    I need:
    - Laser color PRINTING for a small business (+/- 1500 pages per month)
    - SCANNING, preferably easy multipage scanning through the automatic document feeder
    Optionally:
    - 2nd paper feed tray
    I think of buying the HP Color LaserJet CM2320fxi, but there seem to be plenty of compatibility issues with Lion (e.g. scan to network folder does not work on Lion).
    I'd love to hear about success or failure of MFP on Lion from HP, Brother, Xerox, Lexmark, etc...
    Thx for your advace,
    S.

    I can recommend the Canon MF8380C. It has a document feeder that supports duplex scanning to Lion, either via Image Capture or Preview or 3rd party application like Acrobat Pro. You can also push scan documents from the machine by first configuring the scan settings using the Canon MF Toolbox that gets installed on the Mac.
    The print quality is good for office documents, but not that accurate for colour proofing. It uses Canon's proprietary UFR2 v2.30 driver of which the Lion version of this driver is available from the Canon web.
    As for the monthly volume, 1500 pages per month is the maximum recommended volume, so not sure if this would suit your business needs. It's recommended monthly volume is 800 colour pages.

  • Automatic Document Feeder doesn' pick up sheets to be scanned or copied

    Scan and copy works well from glass; despite cleaning ADF, turning off printer, removing power cord from printer, and printer power cord from wall for 60 seconds, ADF still doesn't work. Printing in B&W and Color work ok.
    iMac (Intel) from 2008 running updated OS 10.6.8 (Snow Leopard).
    Further suggestions?
    Thank you.

    Hello ErgoSum,
    Welcome to the HP Forums.
    I see that you are having an issue with the adf not working.
    I also see that you have attempted some power resets on the unit with no luck as pulling the power cable from the wall outlet and letting it sit for some time.
    Please try the following document on The Automatic Document Feeder (ADF) Does Not Pick Up Paper.
    If the troubleshooting does not help resolve your issue, I would then suggest calling HP's Technical Support to see about further options for you. If you are calling within North America, the number is 1-800-474-6836 and for all other regions, click here: click here.
    Thanks for your time.
    Cheers, 
    Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    W a t e r b o y 71
    I work on behalf of HP

  • How do I use the single page feed on my Canon MX340?

    I am trying to figure out how to feed single pages into the Canon MX340 from the slot on the top. How to make this happen?

    Hello segurry,
    To feed documents into the automatic document feeder (ADF) of the printer, please follow the instructions below.
    Loading Documents in the ADF
    You can load documents to copy, fax, or scan in the ADF.
    Note: To scan a document at optimum quality, load it on the Platen Glass.
    Make sure that any original has been removed from the Platen Glass.
    Load a document in the ADF.
    Open the Document Tray.
    Insert the document in the Document Tray (2) until you hear a beep sound.
    Load the document WITH THE SIDE TO SCAN FACING UP in the Document Tray.
    Note: When you set the alarm to be silent in Device user settings of Device settings, the alarm will not beep even if the document is inserted in the Document Tray.
    Adjust the Document Guides (3) to match the width of the document.
    Do not slide the Document Guides too hard. The document may not be fed properly.
    Hope this helps!
    This didn't answer your question or issue? Find more help at Contact Us.
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • HP Photosmalr 7280 All In One. Business card is jammed in automatic document feeder

    There seems to be a business card jammed in the automatic document feeder which is not allowing the paper to go through.  Is there anyway that I can get it out
    This question was solved.
    View Solution.

    Thank you my problem has been solved.  Your are a life saver

  • I lost my phone and use the IPHone locater, Now that i got my phone back it is disabled and I don't know how to fix it. It had asked for a code but I have no idea what it is so I tried several things but to no avail

    I lost my phone and used the iphone locater to find it. Now that it has been returned to me, it is disabled and says connect to ITUNES. Can you help me ?

    Does the link below help?
    Forgot passcode for your iPhone, iPad, or iPod touch, or your device is disabled - Apple Support

Maybe you are looking for