Trouble locating files after upgrading to Mountain Lion
Just upgraded from Leopard to Mountain Lion. I backed up everything from Leopard once, then backed it all up again once Mountain Lion was installed. Now, I'm having trouble locating all my file folders... everything seems to be lumped into "All My Files". How do I restore everything to their normal spots... so I can see all the normal folders?
When you say you backed up and then backed up again, what does that mean?
Hopefully you knew that Time Machine will make changes going from Snow Leopard to Lion and above and you would have two sets (keep the old)
Ideal is to do CLEAN install on a newly formatted drive and use Setup Assistant to import or migrate apps and documents.
Another, to do a clone (CCC is great as it will create a Lion/ML Recovery partition) and let you keep dual booting for a month or until eve rything is WORKING and updated.
Finally, most learn that with the Mac Pro, isolate all the data documents media and library follders to a non-system disk drive. Handy. Better performance. Leave your home library on the boot drive, which unfortunately Apple saw fit to make hidden by default. I like to dig in and delete caches so now I am more likely to use CCleaner which works fine on Mac as it did on Windows, safe and no issues.
Never update over your only backup set. Not at first, maybe not ever, and always have multiple redundant backup methods (like CCC and Time Machine at minimum).
The files should still be on your backup sets if you were CAREFUL and did it right. And planned ahead a bit.
Similar Messages
-
Why cant i upload files after upgrading to mountain lion?
i just upgraded to mountain lion and now when i try to select files to upload using safari it will not let me select them.is this a common fault?how do i remedy this?
You probably have some incompatible software.
I wrote a little diagnostic program to help show what might be causing these problems. Download EtreCheck from http://www.etresoft.com/download/EtreCheck.zip, run it, and paste the results here.
Disclaimer: Although EtreCheck is free, there are other links on my site that could give me some form of compensation, financial or otherwise. -
Lost iTunes files, iPhoto files after upgrade to mountain lion.
I'm an idiot I didnt back anything up...
I upgraded from lion to mountain lion. At first the set up screen would not accept my apple id password so I created a blank(new) account just to get the computer to work.
It works ok but all my desktop files have disappeared, iPhoto files have gone and iTunes (although the drive has the files) is blank. I'm feeling a bit sick cause all my holiday snaps from my iPhone and all my preferences have just disappeared...
Loads of important stuff on the desktop has gone as well.
When I try to search for "all files" it says they have gone too. But that can't be right...right?
It's a disastor can anyone help?
IJYou say if I understand correctly that the files are still on the disk, if so you may be able to reassign them to another account. See this link but read carefully before you try it and backup those files now before you start. Hopefully taking a clone of your disk will backup your old data but again check that they are one the cloned drive before any changes are made.
http://www.cultofmac.com/126621/how-to-move-or-rename-your-mac-home-folder-macrx /
Someone may offer a simpler solution while you are cloning the hard drive.
regards -
After upgrading to Mountain Lion, I repurchased Garageband and I can't get passed the complete installation. I've read through several posts that all reference the "com.apple.garageband.plist" solution. I don't seem to have the referenced .plist. Any solutions or suggestions?
Did you upgrade from SnowLeopard?
I can't get passed the complete installation
What exactly is happening? Is GarageBand trying to download over and over again?
all reference the "com.apple.garageband.plist" solution. I don't seem to have the referenced .plist.
The property list stores your preferences, but also the settings from the last run of the application. If that file is corrupted in some way, you might see third behaviour.
You must have this file, for it will be recreated automatically, if it is missing, or you have a permissions problem with your user library.
Perhaps you did look in he wrong place.
in MacOS 10.7. or later the User Library is hidden. To find the Preferences Files use the Finder's "Go" menu:
Quit GarageBand, if it is running.
Click onto you Desktop to bring the Finder forward.
In the Finder Menu press "Go" and hold down the "option/alt" key, until your user library appears in the drop-down menu
Select "Library" and in the Finder window that opens navigate to the "Prederences" folder; move com.apple.garageband.plist to the Desktop.
Log off and on again (don't skip that step!). Retry GarageBand and see if it GarageBand is now downloading the missing content properly.
If that does not fix the problem, post back and explain in more detail what the download problem is.
Why did you "repurchase" GarageBand? If you already owned GarageBand '11, it should be unnecessary.
Regards
Léonie -
After upgrading to Mountain Lion, I cannot open my File Maker Pro files. Can I use Numbers to open these files?
Numbers is a spreadsheet program and FileMaker is a database program, so you probably can't use Numbers to open them unless you had first exported them from FileMaker in a spreadsheet-compatible format.
If you upgraded from 10.6 Snow Leopard or earlier and your old copy of FileMaker won't open anymore, it might be a PowerPC application that is not compatible with 10.7 and later. If that is the case, to work with your FileMaker files you should upgrade your copy of FileMaker to the latest version, which seems to be FileMaker 12. -
after upgrading to mountain lion i keep getting an error message saying my startup disc is full. it shouldnt be full because there is barely anything on there and i was running windows with bootcamp prior to this with no issues. my computer now freezes and programs close randomly. The usual command for opening windows with bootcamp doesnt work. once in restarted my computer after it froze and it rebooted in windows automatically. i really just want to know if there is a way to take the upgrade off my laptop because it is very annoying.
Hi Memalyn
Essentially, the bare issue is that you have a 500GB hard drive with only 10GB free. That is not sufficient to run the system properly. The two options you have are to move/remove files to another location, or to install a larger hard drive (eg 2TB). Drive space has nothing to do with SMC firmware, and usually large media files are to blame.
My first recommendation is this: download and run the free OmniDiskSweeper. This will identify the exact size of all your folders - you can drill down into the subfolders and figure out where your largest culprits are. For example, you might find that your Pictures folder contains both an iPhoto Library and copies that you've brought in from a camera but are outside the iPhoto Library structure. Or perhaps you have a lot of purchased video content in iTunes.
If you find files that you KNOW you do not need, you can delete them. Don't delete them just because you have a backup, since if the backup fails, you will lose all your copies.
Don't worry about "cleaners" for now - they don't save much space and can actually cause problems. Deal with the large file situation first and see how you get on.
Let us know what you find out, and if you manage to get your space back.
Matt -
After upgrading to Mountain Lion 10.8.2 on my iMac, I cannot print to my Samsung B&W Laser printer ML 2525W either by USB or wireless. Any help on how to setup or reconfigure would be apprecaited.
I either print blank pages or prints one time then goes off line, or spits out a bunch of blank paper, etc. Have gone through all the standard fixes, reboot, reset , reload driver, etc.From the link to the Thread you provided, I worked through the one message procedures that were listed.
For ease of reference, I have copied them and printed them below. This was an old thread but the guidance still works with no firmware upgrade required.
I would stress that you MUST delete any and all files relating to USB connection of the printer to the MAC, including all print drivers (from both Apple and Samsung either from CD or web downloads) and all print queues, etc. I was only able to get the printer to properly hand shake with my Mac by setting it up wirelessly after all old files were deleted with hard power off reboots on both the Mac and Printer.
I hope that someone from Apple will pass this note along to their programing department because there is some type of incompatibility in the new ML OS and the Samsung ML2525w print dirvers used for a cable (USB) type connection. Apple needs to be talking to Samsung to get the USB issue resolved. I am going to post this same message on the Samsung site to see if someone from there will contact Apple to work together on a final solution for USB connectivity.
Here is the steps I followed to get my ML2525w to work in the wireless mode. Again, I cannot stress the need to clean out all the old files (drivers, print queues, etc. - everything) before setting up wirelessly.
As a note, I ran this printer with Lion for almost 2 years and it always worked fine (both wireless and USB). From other comments on the thread, users were good with this printer using Lep. and Snow Lep also. - - no issues from either a USB connection or wireless until Mountain Lion.
Before the fix, I was experiencing many of the same issues as described on user chat threads, printer going offline after a print job. 1st page sometimes printing but all the rest of the pages were garbage. No printing at all. Printer just running a bunch of blank pages out. etc.
I run an iMAC 27" desktop with the ML OS upgrade just installed from Lion.
"I've just installed one of these printers for my parents.
First of all, don't waste your time connecting the ML-2525W as a USB printer. The printer will go offline after each print job. It's hopeless, at least (I assume) until Samsung gets around to publicly releasing a firmware update.
Instead, you have to use the ML-2525W as a wireless printer. In that mode, it works fine.
This is what I did:
(1) First, if you have already attempted to install the Samsung driver software from the included CD-ROM, uninstall it. Get the uninstaller from the Samsung support site:
http://www.samsung.com/us/support/downloads/ML-2525W
Download the "Printer Driver (ver. 4.0)" ZIP file. It unzips to a folder that contains the uninstaller. Likewise, download the "Smart Panel Driver" ZIP file and uninstall the Smart Panel software.
(2) Disconnect the USB cable from the printer, if it is connected. Pull the power plug on the printer and power cycle it.
(3) Restart your Mac.
(4) Go to the "Printer Driver (ver. 4.0)" folder that you previously unzipped. Inside it is a folder named "WirelessSetting". Open the folder and run the "Wireless Setting.app".
(5) The application will ask you to connect the USB cable to the printer. Do so, and the Mac should be able to communicate with the printer to perform the wireless setup.
(6) The application will show you a list of wireless networks. One of them is the wireless interface in the printer (ad-hoc). You can ignore that unless you intend to use the printer without connecting to another wireless network. In my case, I selected the wireless network in my parents' home (infrastructure) and entered the security passphrase. The application then configured the wireless interface in the ML-2525W to connect to the home network.
(7) The Wireless Setting application will then tell you to disconnect the USB cable.
(8) After finishing the Wireless Setting application, go to Word, Textedit, Pages, or Safari, and select a file or page to print. In the print dialog window, you should see the ML-2525W as a "Nearby Printer" (i.e. via Bonjour). Select the ML-2525W, and your Mac will automatically connect to Apple's Software Update and download the latest Samsung driver. If for any reason the Software Update download does not succeed, you can manually download and install the Apple driver using the previously published link in this discussion.
(9) After that, you should be able to print to the ML-2525W whenever you want, without the printer going offline.
(10) If you have a USB printer queue still in your Print & Fax Preferences (from your previous unsuccessful attempt to connect via USB), you can delete it. You only need to keep the Bonjour queue.
Obviously YMMV, but in my case this procedure got the printer working reliably without the need for a firmware update."
MacBook (white 12"), Mac OS X (10.6.5) -
after upgrading to mountain lion, i cannot play any video at all, be it directly off a DVD, or through streaming like youtube, BBC iplayer, love film or even directly off my iTunes library. in each case, all i get is a black screen and no error message.
Hi, i had the same problem and tried this,
Somehow iTunes is tied to Safari. Try this:
Someone mentioned to clear all website data and history in safari, stupid but it was either this or the below that fixed it
or this,
Disable Wi-Fi Networking Services
Many users have reported that they’ve solved their issues by disabling Wi-Fi Networking under Settings > Privacy > Location Services > System Services. This only relates to your location being used for Wi-Fi Networking, so it doesn’t disable Wi-Fi entirely.
Please let me know if it works. -
After upgrading to mountain lion my calendar does not print in weekly mode anymore
after upgrading to mountain lion my calendar does not print in weekly mode anymore
I'm having the same problem with both my Vivotek wired network camera and Panasonic wireless network cameras. At first I thought this was an issue with the video framework in Mountain Lion, but if Firefox is working (I haven't tried it yet), it sounds like it may be an objective-c video library that has been changed. It's possible Firefox is using an objective-c interface that calls an objective-c function that isn't called by Safari or IP Camera Viewer, etc., (possibly a function that is on its way to be deprecated) or Firefox could use it's own library that directly calls the video framework.
Could be the Mountain Lion objective-c framework has a buffering issue.
Since this is occuring in both 3rd party software and Apple software, it sounds like it's an Apple issue. 3rd party applications typically utilize the Apple Developer objective-c frameworks to access video frameworks/libraries (for example, MJPEG). Thus, contacting 3rd party developers may not solve the situation (unless they can figure out a temporary bandaid--possibly figuring out the video framework call that Firefox uses and patching their software to do the same (not a simple task), but could still provide more feedback to Apple via their developer status.
Has anyone attempted to record from their cameras via iMovie or Final Cut Pro X HD? I will try mine later tonight to see if it records the hanging. If it does, then it's looking more and more like Apple's the culprit.
My suggestion is for everyone to file a bug report via http://www.apple.com/feedback/macosx.html -
After upgrading to Mountain Lion, i can't connect to app store or safari
After Upgrading to Mountain Lion, I can't access the app store, itunes store, Safari - anything that requires the internet. I tried resetting my modem and rebooting.
I also tried deleting items from the keychain that look like they are related to the above. When I did that and rebooted, It works for a little while, and then gets back to where it won't login to anything on the internet and safari won't load anything.This means that at some time you had the iWork ’09 trial installed. You need to delete the trial & then reinstall from the boxed DVD or the Mac App Store. The files to delete are the iWork ’09 folder from the main HD > Applications; the iWork ’09 folder in HD > Library > Application Support & the individual iWork application plist files found in HD > Users > (your account) > Library > Preferences for each user. Yvan Koenig has written an AppleScript that removes the files. You can find it on his box.com account in for_iWork'09 > other_iWork'09 items > uninstall iWork '09.zip.
-
After upgrading to mountain lion, my ip camera video feeds time out
I've been using my iMacs for a few years to monitor six ip Camera video feeds. The cameras I use are both FOSCAM and AXIS brands. I've used a few third party software solutions to do the monitoring, but I could also always use Safari to access a camera at a time by putting that camera's IP address in the address field and logging into the camera.
After upgrading to Mountain Lion, my video feeds started timing out when using DComplex's IP Camera Viewer, so I thought initially it was strictly an issue with that third party app. However, I then logged into my cameras using Safari and they timed out as well. Similarly, when using Axis Camera viewer, my video feeds would time out. It seems as whatever the issue, it does not affect Firefox, because I can still login and monitor 1 feed at a time using that browser without any timeout issues, and for some odd reason, the FOSCAM only program uFoscam works, but the problem for me with that app is that it only works with Foscam, and not the Axis cameras (besides it's an inferior program to IP Camera Viewer in my opinion as well).
Has anyone encountered this problem and come up with a solution? I'm thinking it's some sort of plugin or video codec problem, but it's well above my paygrade to figure it out.I'm having the same problem with both my Vivotek wired network camera and Panasonic wireless network cameras. At first I thought this was an issue with the video framework in Mountain Lion, but if Firefox is working (I haven't tried it yet), it sounds like it may be an objective-c video library that has been changed. It's possible Firefox is using an objective-c interface that calls an objective-c function that isn't called by Safari or IP Camera Viewer, etc., (possibly a function that is on its way to be deprecated) or Firefox could use it's own library that directly calls the video framework.
Could be the Mountain Lion objective-c framework has a buffering issue.
Since this is occuring in both 3rd party software and Apple software, it sounds like it's an Apple issue. 3rd party applications typically utilize the Apple Developer objective-c frameworks to access video frameworks/libraries (for example, MJPEG). Thus, contacting 3rd party developers may not solve the situation (unless they can figure out a temporary bandaid--possibly figuring out the video framework call that Firefox uses and patching their software to do the same (not a simple task), but could still provide more feedback to Apple via their developer status.
Has anyone attempted to record from their cameras via iMovie or Final Cut Pro X HD? I will try mine later tonight to see if it records the hanging. If it does, then it's looking more and more like Apple's the culprit.
My suggestion is for everyone to file a bug report via http://www.apple.com/feedback/macosx.html -
TS1277 "iPhoto was unable to connect to Photo Stream" error after upgrading to mountain lion
Has anyone gotten this error after upgrading to mountain lion on a computer that already had a user setup on it?
My iphoto was working with photostream and now it will not connect at all.
I ran fix disk permissions and once it showed up in iphoto, photostream was loading and then it disappeared again.
help!FWIW I fixed mine when I realised I'd probably downloaded iPhoto using an AppleID from the App Store but logged into iCloud with a different AppleID. I deleted iPhoto and it's related files (but not the iPhoto Library) using CleanApp, entered the App Store with my usual AppleID and downloaded iPhoto again. Once the App Store, the downloaded iPhoto and iCloud logins were the same iPhoto Stream worked again.
-
Application quit unexpectedly after upgrade to Mountain Lion.
Hi, Please help. after upgrade to Mountain Lion 10.8.1 my iPhoto keeps quitting unexpectedly, then after upgrading to 10.8.2 yesterday, now almost most of my application which I used todays quits unexpectedly, this includes my broadband connection. I plan to fallback to Lion, but paying $20 for OS that causing me so many problem is not worth it. Anyone can help me to resolved this? Thanks in advance..
Have you tried booting into the Mountain Lion Recovery Partition by booting while simultaneously holding down the Command - R keys? You can repair the main Mountain Lion partition disk from there by using "Disk Utility" from THAT location. Select the Macintosh HD in the column by highlighting it and selecting "Repair Disk". Then I would run "Repair Permissions" twice. That may solve your problems.
Hope this helps -
IMessage and FaceTime won't accept my Apple ID after upgrading to Mountain Lion
iMessage and FaceTime won't accept my Apple ID in order to activate after upgrading to Mountain Lion on my MacBook Pro.
My Apple ID works to sign in to the App store as well as on my iphone and iPad.
What do I need to do?This Apple doc might help ya out -> iOS: Troubleshooting FaceTime and iMessage activation
Troubleshooting Apple ID activation
After each step, toggle iMessage and FaceTime off and then on again in Settings > Messages and Settings > FaceTime.
Update to the latest version of iOS.
Ensure that you have an active Internet connection. Check your Wi-Fi network using standard Wi-Fi network troubleshooting.
If you receive an error when signing in to your Apple ID, visit myinfo.apple.com, sign in to your account, and ensure that the primary email address has been verified.
Ensure that FaceTime has not been restricted: Settings > General > Restrictions > FaceTime.
In Settings > General > Date & Time, ensure that Set Automatically is on. If Set Automatically is on, but the incorrect time zone is displayed, turn Set Automatically off and then choose the correct time zone, date, and time. Then turn Set Automatically on again.
Enable iMessage and FaceTime while connected to another Wi-Fi network in a different location. -
Server admin is unable to login to server.app after upgrade to Mountain Lion Server?
After upgrade to Mountain Lion Server I am unable to login to the server tools. When I input the admin user name and password the dialog box just shakes indicating the wrong password. But it is the correct password. How do I reset the password or if necessary how do I rest the server and start over on Mountain Lion. I found info on how to reset the server on previous versions of the server which involved executing a plist in the LaunchDaemon folder. However that file does not exist on the server following upgrade to Mountain Lion.
Thanks, HowardI upgraded today and had the same issue. I took following steps to fix my computer.
Boot into Recovery Partition (Hold Option Button while booting)
Open Terminal.
Type resetpassword
Select your hard drive
Select the user account (Administrator)
Enter a new password for the user
Reenter password
Save
Restart
Boot normally, Login as Adminstrator with the new password and add "Admin" permission to your account.
Restart
Everything should be working as expected
Maybe you are looking for
-
Safari 5.0.6 won't open and I have to use force quit to quit it.
Safari 5.0.6 won't open and I have to use force quit to quit it. I'm using OS 10.5.8 I've tried reinstalling it and that doesn't work either. This is the crash report (It's huge - sorry) - Thanks Date/Time: 2011-09-09 22:06:07 +0100 OS Version:
-
I've had the iPod for a few months and it worked great. For some reason it went into recovery mode but I have no clue. I've always used the laptop I have with the same wifi. As soon as I plugged by ipod into the computer to recharge the battery it we
-
How can i get my ipad to print to my HP deskjet f4580
How can i get my ipad to print to a HP deskjet F4580
-
Ive lost my bookmark and backspace icons. Can you help?
Ive somehow lost these icons. Also Ive got another toolbar-Elf which I cant seem to ged rid of. Can you help?
-
ICal Syncing Issues: iCloud & iMac to iPhone Not Working
I use iCal. I updated my iCal on my iMac and it updated to iCloud, but not my iPhone. When I open iCal on my iPhone, it cycles and cycles to update, but doesn't update. What can I do to get my iPhone iCal to sync?