Trouble maintaining connection since...

I recently updated to 10.4.11 and since then I have had a great deal of trouble maintaining my dial up connection at original modem setting (v92). I have it on v34 currently but it is a slower connection. Using original it dials in, says connecting repeatedly but never does, or does but disconnects soon. Sometimes says no carrier detected, hung up unexpectedly or something else. My laptop on same service is fine. Any ideas?

A warm welcome to the forums!
I wouldn't expect the upgrade to cause, (nor have I heard/read about), any problems with Dial-up.
That being said, the problem probably lies in a partial update or Permissions issue.
1st thing to try...
About Disk Utility's Repair Disk Permissions feature...
http://docs.info.apple.com/article.html?artnum=25751
Reboot afterwards.

Similar Messages

Trouble connecting since installing Lion

Since installing Lion on my Macbook Pro, I'm having trouble acquiring and maintaining connections with my WiFi signal. No such issues with my Snow Leopard/Leopard Macs, PCs, iPhone and iPad.
Any ideas?
Thanks,
JD

JD, I have experienced the same ... losing connection frequently ... what did it for me was to unplug my router (Time Capsule) and network extension (Apple Extreme) for about 15 minutes, then plug back in ... don't know if it will work for you, but it surely is worth trying I'd say

Since updating to OS 6 trouble staying connected to wifi how do I fix this problem?

Since updating to OS 6 trouble staying connected to wifi how do I fix this problem?

What to do if your computer won't recognize a FireWire device
http://docs.info.apple.com/article.html?artnum=88338
iMovie: Cannot see or control camera
http://docs.info.apple.com/article.html?artnum=43000
If your analog video device does not support device control, turn off device control. To do this, choose Preferences from the Edit menu, click the Device Control tab, then make sure the checkbox next to Enable Device Control doesn't have a checkmark in it.
Sue

Having trouble maintaining remote desktop connection with Mavericks. What is this about needing RDC 3.7.1 with Mavericks. I downloaded RDC 3.7.1 but it does not replace RDC 2.1.0 previously installed.

Having trouble maintaining remote desktop connection with Mavericks. What is this about needing RDC 3.7.1 with Mavericks. I downloaded RDC 3.7.1 but it does not replace RDC 2.1.0 previously installed

Lucky you, it did not work for many users (which as it should be) so MS produced a new version, for ML and Mavericks.
It's in the App Store, for free.
FYI, I assume that you were attempting to post a picture, no one can see it (except maybe you) because it is on your computer rather than the forum server.
file:///Users/dbrant/Desktop/About%20Apple%20Remote%20Desktop%203.7.1.webloc
Use the small camera icon in the editor toolbar to post it.
It also looks like you attempted to use Apple Remote Desktop, which does not do Windows.

HT1695 Since i upgraded to ios 6, I am having trouble stayong connected to wifi networks I connected to on my iPhone 4S .. anyone else have this issue ?

Since i upgraded to ios 6, I am having trouble stayong connected to wifi networks I connected to on my iPhone 4S .. anyone else have this issue ?

I sometimes experience the same issue. But not only in 6.1 but also in previous versions

Having trouble with wifi since upgrading to ios7

Having trouble with wifi since downloading ios7

I have had this problem on my iPad and iPhone 5 since the update in September. I called apple support numerous times, did all the troubleshooting, and went to the apple store and had both devices replaced under warranty. Nothing fixed the problem.
Then as a last ditch effort I called my internet service provider. Turns out that the ios7 doesn't seem to work on a wpa2 network and needs to be changed to a wep network. The tech did this over the phone and now both devices work normally connecting to my wifi! I am still nervous I'm going to run into more issues but so far so good.

HT4972 my (4s) just updated and now it connect maintain connection to my wifi, and all apps that I downloaded are not on my screen. If i search them in the App Store I can open them, but not keep them on my screen.

i just updated my iPhone to the new operating system. It will not maintain connection to MY wifi. In addition, the applications that I had installed are no longer on the screens. I can only access them via the app store... and there I can "open" them,

Tried that as well. The problem isn't that the apps aren't downloading, it's that the app icon is stuck on Waiting. I can actually open and use the apps from the App Store, but not from the home screen.
I'm adding photos to try help explain, though I'm not they'll show up well on since I'm on mobile.
THats the the home screen with useless icons
BUt if I search the App Store for one (like Buzzfeed)
IT it shows it being installed, and I can even open the app an use it. I would try to reinstall but I cant remove the apps.

Dúvida - NF-e: Maintain Connected Authority Systems - layout 3.10

Boa noite!
Estou realizando o customize da SPRO, porém notei que só posso inserir a seguinte entrada para um mesmo CNPJ:
Ou seja, quando tento colocar os demais estados o erro de chave duplicada é retornado devido aos campos logical system e Company's Own CNPJ. Dessa maneira, quando executo o novo programa de status de serviço (/XNFE/NFE_CHECK_SRV_STATUS) relalizando o debug noto que existe uma verificação durante a execução da função (/XNFE/SRVSTA_READ_CUST) na qual, por mais que eu tenha cadastro todos os cUF na spro que ficam registrados na tabela (/xnfe/tcuf) o status de serviço acaba sendo executado apenas para o que existe na tabela (/xnfe/govpar) alimentada pela configuração da NF-e: Maintain Connected Authority Systems da imagem que enviei posteriormente. Sendo assim só é executado o status de serviço para SP e não para todas as cUF que estão na atividade NF-e: Define Service Status Request for Authority (SEFAZ). Abaixo segue trecho do código que verifiquei que realiza esse controle no debug:
SELECT * FROM /xnfe/govpar INTO TABLE lt_govpar
                              WHERE doctype = iv_doctype.
*--- 2. Version determination
IF lt_govpar IS NOT INITIAL.
    SELECT * FROM /xnfe/xmlversdet INTO TABLE lt_xmlversdet
                       FOR ALL ENTRIES IN lt_govpar
                             WHERE doctype = iv_doctype
                               AND logsys   = lt_govpar-logsys
                               AND ( cnpj     = lt_govpar-cnpj
                                OR   cnpj     = ' ' )
                               AND messtype = iv_messtype.
*--- 3. Service status check parameter
    SELECT * FROM /xnfe/tcuf INTO TABLE lt_tcuf.
    LOOP AT lt_govpar ASSIGNING <ls_govpar>.
*--- Get corresponding entry from version determination
      READ TABLE lt_xmlversdet WITH KEY doctype = <ls_govpar>-doctype
                                        logsys = <ls_govpar>-logsys
                                        cnpj    = <ls_govpar>-cnpj
                              ASSIGNING <ls_xmlversdet>.
      IF sy-subrc <> 0.
*--- If nothing is found try with blank CNPJ
        READ TABLE lt_xmlversdet WITH KEY doctype = <ls_govpar>-doctype
                                          logsys = <ls_govpar>-logsys
                                          cnpj    = ' '
                                ASSIGNING <ls_xmlversdet>.
      ENDIF.
      IF sy-subrc IS INITIAL.
*--- Get corresponding entry for service status check parameter
        READ TABLE lt_tcuf WITH KEY doctype = <ls_govpar>-doctype
                                    cuf     = <ls_govpar>-cuf
                                  ASSIGNING <ls_tcuf>.
        IF sy-subrc IS INITIAL.
          ls_stacheck-cuf       = <ls_govpar>-cuf.
          ls_stacheck-tpamb     = <ls_govpar>-tpamb.
          ls_stacheck-xmlvers   = <ls_xmlversdet>-xmlvers.
          ls_stacheck-sscperiod = <ls_tcuf>-sscperiod.
          ls_stacheck-tzone     = <ls_tcuf>-tzone.
          ls_stacheck-respcont = <ls_tcuf>-respcont.
          ls_stacheck-checkcont = <ls_tcuf>-checkcont.
          APPEND ls_stacheck TO et_stacheck.
        ENDIF.
      ENDIF.
      CLEAR: ls_stacheck.
    ENDLOOP.
ENDIF.
Sendo assim, como faço para que na atividade NF-e: Maintain Connected Authority Systems eu possa inserir todos os cUF com para os quais executarei o status de serviço e posteriormente enviarei notas?
Obrigado.,

Bom dia Luís,
Exatamente! De fato o que ocorreu foi uma confusão, pois na versão anterior era possível enviar o status de serviço mesmo se você não possuísse uma filial para o estado em questão. Quando fui fazer a migração do cliente todos os estados estavam configurados para emitir status de serviço, porém não há necessidade de enviar o status de serviço para um estado visto que você não possui uma filial para emissão de Nota no mesmo.
Abs.,

NF-e: Maintain Connected Authority Systems - Já existe uma entrada com a mesma chave

Bom dia!
Estou tendo um problema para adicionar novas entradas na SPRO - OUTBOUND -NF-e: Maintain Connected Authority Systems para configuração do layout 3.10:
Sendo assim, como devo configurar todos os estados para a SEFAZ se o sistema lógico e CNPJ são chaves da tabela /xnfe/govpar?
Com isso, não consigo executar todos os status de serviço no layout novo através do report (/XNFE/NFE_CHECK_SRV_STATUS) depois de cadastrálos na atividade NF-e: Define Service Status Request for Authority (SEFAZ,) pois durante a execução do report (/XNFE/NFE_CHECK_SRV_STATUS) além da tabela /xnfe/tcuf a tabela /xnfe/govpar também é verificada.
Grato.,

Bom dia Luís,
Exatamente! De fato o que ocorreu foi uma confusão, pois na versão anterior era possível enviar o status de serviço mesmo se você não possuísse uma filial para o estado em questão. Quando fui fazer a migração do cliente todos os estados estavam configurados para emitir status de serviço, porém não há necessidade de enviar o status de serviço para um estado visto que você não possui uma filial para emissão de Nota no mesmo.
Abs.,

(Trouble printing) Trouble with connection between Macbook Pro and Hp Deskjet 1510.

Trouble with connection between Macbook Pro and Hp Deskjet 1510. (Nothing Prints).
I have a Macbook Pro and am having difficulty printing documents from ‘Pages' from my Hp Deskjet 1510. I have installed the necessary software for the printer and it is connected via USB. Every time I try to print the printer icon comes up as it should, 'printing' and then 'job completed' and then the icon disappears. (Nothing is printed.) I thought it might be something to do with Pages compatibility with the printer but exporting the document to Word or making it a PDF doesn’t change anything. I don’t have Microsoft Word on my computer. The scanner does work and when I printed a ‘Test Page’ that worked too.
Let me know if you know why this is happening.

With these settings the network now works flawlessly, however, when i have my ethernet cable plugged in, my internet access via my airport card(on the macbook pro) is no longer available. Hoping you can tell me why this would be with this info i've provided.
Educated guess. The networking devices have priorities as to which are used. The standard order is that Ethernet has a higher priority than Airport.
While your Ethernet is unplugged it is inactive and the Mac ignores it. Once you plug it in, the Mac sees that it is active and switches traffic to that interface.
I actually take advantage of this feature at home, but configuring my Airport and Ethernet with identical fixed IP addresses. Normally I'll use Airport, but if I'm copying a huge file and I want faster performance, I'll just walk my MacBook (previously iBook, previously Powerbook) over to my Ethernet switch and plug in my MacBook. Magically, the Mac detects that the Ethernet is active and continues the file transfer uninterrupted over the faster 100baseT Ethernet connection. When the transfer is finished, or if I really need to move back to the Comfy Chair, I unplug the Ethernet cable, and all activity reverts back to the Airport, all without disrupting any existing networking connections.
You on the other hand have totally different settings for your Ethernet and your Airport, so when you switch to Ethernet, you basically loose your Airport connections.
Something you can try:
System Preferences -> Network
Gear icon on the bottom left, next to the [+] [-] icons.
Select *Set Service Order...*
Now Drag the network interfaces into the perfer priority order you want. In this case put Airport above Ethernet.
NOTE: You may want to create a new Network Location for this, instead of messing with your normal home Location (which is most likely the default Automatic. That way you have your original you can always fall back to.

HT5706 trouble staying connected to air play with Apple TV even though my device is still connected to the internet and playing.

I am having trouble staying connected to air play with Apple TV even though my device is still connected to the internet and playing.

Troubleshoot the network connectivity issues.
Power cycling the ATV and router is generally a good place to start.

TS1398 Still having problems with my ipad wifi connection since upgrading to IOS 6. Can Apple do something about it the soonest possible time. I don't have this kind of problem using IOS 5.1.1 Can you at least put back the 5.1.1 if you cant find a solut

So disappointed with IOS 6. I'm having weak wifi connection since upgrading to it. Can Apple do something about it? Can you at least reset it to IOS 5.1.1?

Sorry Jim for the wrong question because I'm getting frustated with my IPAD since I can't use it for surfing internet with a faster speed. Ipad was very convenient to use until this IOS 6 upgrade. Tried all the suggestions in the forums but still gets back to weak wifi connection.

Trouble with connecting my photosmart plus b209a

trouble with connecting my photosmart plus b209a ........it was conncected to my network until today i was messing around with it and reset the network default by accident, and now i am trying to connect the printer to my router and it says it doesnt see any connection and ive tried reseting the router bunch of times, and then for a brief minute it said it was connected to ssid hpsetup? and communication mode adhoc?.. not really sure what that was so i reset the network on the printer again back to default and i dont really know what to do it just says no connection found, does anyone have an idea of what i should do and whats wrong

Hi joey12293,
I am linking a document that has very good information about how to install the printer to the network. Click Here See if this helps. Let me know how it goes.
Good Luck !
Also, remember a click on the Kudos star to the left is a quick "Thanks" for a helpful post.
Please select the "Accept as Solution" button on the post that best answers your question.
I appreciate your input ! ___________________________________ _____
Thank You,
Rich
Expert

I'm having trouble staying connected to the internet

I'm having trouble "staying" connected to the internet.

hmmmmmmm..........
How are you connected to "the internet?" There are many ways & you provided none.
If wireless, are you using one of Apple's routers, or a 3rd part one? If the latter post in their forums or contact their tech support department.
Last but not least:
Please detail all you have done to resolve your issue. Need this information so that the users can avoid the "been there, done that" scenario type responses. This is to avoid repeating the troubleshooting you may have already tried. Thank you.

TS1368 Is itunes store down today? I can't connect since this morning...

Is itunes store down today? I can't connect since this morning...

I'm having the same issues on my iphone and my computer

Trouble maintaining connection since...

Similar Messages

Maybe you are looking for