Trouble monitoring output with M-Audio FireWire 410

I just got a new iMac Core Duo and plugged in my M-Audio FireWire 410 audio interface to run with Garageband 3. Changed input/output settings, input seems fine and output too, even the 410 is flashing its output lights... but I cannot hear any monitoring of real instruments or software instruments on the FireWire 410. I've tried different headphones, adapters, and I know the jacks work because I also use the 410 with Cubase on another Mac. I suppose this is more a problem with the M-Audio FireWire 410 than with Garageband 3... but does anyone have any suggestions?
iMac Intel Core Due   Mac OS X (10.4.4)  

Hi,
I have a similar problem related to the output of the M-AUdio FireWire 410.
Ive being using m-audio firewire 410 (driver version 1.7.2) together with a MacBook Pro (2GHz Intel Core Duo, OSX 10.4.7) since a couple of months without having any problem. But the last week my computer had an "unexpected problem" and I had to shut it down using the power button while garageband and itunes were working. After I restarted it again, I realized that even if I get a signal on the sw rtn 1/2 when I use itunes or Garageband, I get no signal on any of the assigned output buses. The funny thing is that when I use an analog input, I actually get signal on the assigned output bus. I uninstalled and reinstalled again the drivers of the m-audio 410 firewire without any success.
I would really appreciate any comments.
Thanks in advance,
Rodrigo

Similar Messages

  • Help! Trouble with M-Audio Firewire 410 MIDI Compatability

    I am currently working on an iMac running OSX 10.4.11. I have been unsuccessful in trying to use a Yamaha P-70 keyboard, running through my M-Audio Firewire 410 using the MIDI input to record MIDI sounds in Garageband. I have had great success with this in the past before this version of iLife with the Garageband updates. My computer recognizes I have a MIDI device, and I have changed the proper settings both on the control panel and within Garageband to reading the M-Audio Firewire 410, yet I am not getting any signal from the keyboard as a MIDI instrument and therefore cannot record any sounds. Does anyone have any suggestions, or is this something perhaps someone else has dealt with already? I appreciate your help!

    Very interesting. Couple of questions for you:
    1. Did it only affect MIDI instruments or real instruments as well?
    2. If it stopped working with GB, what did you to fix the problem? Would it possibly work with Logic? I have contemplated purchasing that software.
    3. Do you know of any fixes for the 410?

  • HELP ME WITH M-AUDIO FIREWIRE 410

    Hi
    I need desperate help with my Logic Pro 7 and getting audio.
    I have my guitar linked up to an M-Audio firewire into input 1 and and i have my speakers coming out of output 1. In garageband it all works perfectly but when i go into logic i cant get any output audio and no input, i have configured and it has registered with the M-Audio Firewire so, what am i to do! I have changed the channel to input 1 and can see it on the meter as working but no output!
    Please help, i've tried everything and on the verge of a breakdown with this!
    Thank You

    In case there is something wrong with the environment on the project you are trying to work out why you are not having any sound>
    try and open one of the template ones>
    File>new>tick use song template and select something like the basic one.
    If you have the correct settings at your audio midi setup you will be able to have i/p and o/p by simply selecting audio 1.it's already set to input 1 and o/p 1 or 1/2.
    If you rec enable the audio track 1 you will be able to see levels and hear sound out of your speakers.
    hope this helps
    powerbook G4   Mac OS X (10.4.5)   logic pro 7.1.1,FW410 m-audio

  • Problems monitoring audio with a m-audio Firewire 410 card

    So I have a M-Audio 410 hooked up through the firewire port on my G5, But it geeks out (audio turns to loud noise, strange defects, spinning ball of slowness appears) everytime I try to monitor audio out of final cut, also when I play LARGE quicktime files!!! The card works fine for all other applications I have on my mac, Cubase, iTunes etc... Anyone else have heard of this, or know what to try. I have most of my video on an external drive, a LACIE media drive, which is my only option as I am working with large amounts of video.
    I am thinking this is an issue with the bandwith of firewire on the computer. Maybe too much information between the audio card, and accessing the drive through the other firewire port. Any thoughts?
    Cosmos

    Hello, I was just about to post the following when I saw your recent post, Wondering if you ever found a solution for what you're running into? (BTW, I went to UO a looooong time ago. Go Ducks!)
    We'd like enhance the audio end of our edit suite and are thinking of adding an "FireWire 410" from m-audio for I/O. And ProTools.
    But we've read here and there in forums that there may be a problem with Firewire I/O (and maybe the m-audio "FireWire 410" in particular?) and confusion with decks like the DSR-11, etc. Disturbs the video on an external broadcast monitor.
    One note: we don't think we'd necessarily be sending audio from the DSR-11 to the "FireWire 410" (and on to headphones and speakers) via firewire.
    Anyone out there using FCP and the "FireWire 410" who could comment?
    Thanks,
    Brad

  • M-Audio Firewire 410 - No Output - Intel iMac 20"

    Hey Guys,
    I was wondering if anyone is having trouble with the M-Audio Firewire 410 and the Intel Core Duo iMac.
    System Specs:
    20" iMac 1 GB of RAM
    I am running the beta driver from M-Audio (1.7). The trouble I have is that I get no output. I see the channel lights active. I see the audio transitioning in the Mixer panel. The Firewrie 410 works fine on my PowerBook. I also have an M-Audio Firewire Solo and it works on both machines (with the same cables and hookups). I'm not getting very far with M-Audio on this one. I just wanted to see if it is me or if anyone else out there is having trouble.

    Hi !
    I have a similar problem to the one you already solved. Maybe you could suggest something (maybe I can avoid reinstalling everything).
    Ive being using m-audio firewire 410 (driver version 1.7.2) together with a MacBook Pro (Intel Mac OSX 10.4.7) since a couple of months without having any problem. But the last week my computer had an "unexpected problem" and I had to shut it down using the power button. After I restarted it again, I realized that even if I get a signal on the sw rtn1/2 when I use itunes or Garageband, I get no signal on any of the assigned output bus (I have a m-audio 5.1 surround system). The funny thing is that when I use an analog input, I actually get signal on the assigned output bus of this input. I uninstalled and reinstalled again the drivers of the m-audio 410 firewire without any success.
    I would really appreciate any comments.
    Thanks in advance,
    Rodrigo

  • Help with Powering m-audio firewire 410

    Hi to All
    I just got a Mac book Pro, and I own an m-audio firewire 410 interface. The Mac works wonderfully and I´m extremely happy with it and the 410 together.
    Does Anyone know if there is a way to power the interface with the AC adapter, whithout powering it through the 6 pin Firewire port when using batteries ?
    To My understanding, the 6 pin ports always can power devices.
    Thanks for Your Help, and sorry of any English glitch

    I have a MacBook Pro and a M-Audio Firewire 410. As we speak, I am running a six pin firewire cable to the Firewire 410 as well connecting it to the supplied AC power adapter. Nevertheless, I use it primarily with my PowerMac G5. When connected to the G5, I have both the 6 to 6 pin firewire connector and the supplied AC power power adapter connected and sending power to the unit. Nowhere in the manual does it say that you cannot connect the AC power adapter to the FW 410 while a six pin (powered) firewire cable is in use. It does say that the AC adapter is included to power the unit when a computer with four pin firewire ports (the kind that don't supply power) is connected to the FW 410. As bus power from a firewire port is often the victim of RFI from the components in the computer, I was advised by M-Audio tech support to utilize external power whenever feasible to increase the SN ratio on the device. So basically they told me to connect both at the same time. I assume that the FW 410 knows when it is receiving power from the AC adapter and knows to not utilize the power from the firewire bus simultaneously. If you are really worried, I suggest you call M-Audio tech support and let them tell you what I just did. One final thought: I have used my FW 410 with two power sources (firewire and DC in) for the two years since I've had the unit. It doesn't work as well as it used to...now that the drivers have improved, it works much better a than it used to. I hope this answers your question.
    2GHz DP PowerMac G5 (generation uno) / MBP 15" 2.16 GHz   Mac OS X (10.4.6)   4 GB RAM & 6800 Ultra Nvidia Graphics / 2 GB RAM
      Mac OS X (10.4.6)  

  • HELP!! No sound while recording thrugh M-Audio firewire 410

    I am using Logic express 7 with an M-Audio firewire 410. I have my guitar plugged into the mbox and Logic is picking up the signal from my guitar, but I cannot monitor the sound while recording OR hear anything else at all. When I unplug the mbox, however, I can hear everything that i just recorded along with everything else in the song fine. I just need some help figuring out how to monitor the sound, PLEASE!!!!

    Logic always uses the same audio interface for input AND output, so I suppose your problem is that you do not have any speakers connected to you M-Audio interface. Try adding a pair of speakers to it. If there's still no sound, go to Logic's audio settings and see if "software monitoring" is active or not.
    Björn

  • Using m-audio firewire 410

    Hi Mac, community, I have this m-audio firewire 410 and I'm trying to use it with garage band.
    I only get sound if I change to *built in* audio output in garage band preferences and hear the sound in my computer's buit in speakers..If I want to return the audio through the 410 device ( changing to 410 analog 1/2 output in preferences ) and hear my bass on my 410's headphones output...I can not get any sound...what I am doing wrong ?
    Thanks

    ok..problem solved.

  • M-Audio FireWire 410 and FCP Studio 2

    Here is something that I've learned and would like to share.
    I have a M-Audio firewire device to record with Logic Pro. I have the latest driver and set my sample rate at 48 KHZ to be friendly to FCP6. But when editing and monitoring my video/audio thru my Sony HDV deck all the sequences and clips are sped up that indicates a sample rate issue. Monitoring audio thru the Firewire 410 is ok. My workaround is to disconnect the M-Audio device when editing video and use it only when scoring. So if you have this problem don't pull your hair out and start trashing pref files. Either monitor thru the M-Audio device or simply unplug it. If anybody else has any insight on this I would like to hear it.
    Mac Pro 8 Core   Mac OS X (10.4.9)   8 gig Ram

    Perhaps you have a firewire bus issue as noted in this thread:
    "Problems monitoring audio with a m-audio Firewire 410"
    http://discussions.apple.com/thread.jspa?messageID=1613820
    cosmoscorbin wrote:
    I got the answer talking to m-audio. There is a conflict when you connect two firewire devices to the same bus (two firewire jacks can be on the same bus). 2 solutions.
    1. get a firewire card on a PCI slot, and assign the 410 to that.
    2. daisy chain the hard drive to the back of the 410 and DONT plug any other firewire devices into your mac.
    G5 1.8 DP (PCI-X) Mac OS X (10.4.9)
    ATI X800 XT, 4GB RAM, 20" & 23" ACDs, MXO, M-Audio Revolution 5.1, Fostex D15 DAT

  • Rookie needs help recording DJ set through M-audio Firewire 410

    Ok.... ive been reading through the forums and I still can't find help...
    Im running GB 3 that came with my Macbook I bought about 4 months ago.
    I am a DJ and I trying to record a DJ set/demo.
    What I use to DJ is Pioneer cdj-800 x2 and a Pioneer DJM400 using Rane Serato Scratch through my Mac.
    I recently bought an M-Audio Firewire 410.
    I installed all necessary drivers from m-audio's website (i bought it on ebay so it did not come with the install cd).
    I connect the Maudio into the Mac as instructed and set all my inputs/outputs in prefs to the m audio.
    The record out of my mixer is via rca so i bought an rca to 1/4" cable. The rca going into my mixer and the 1/4" is going into the first "mic/inst" on the interface.
    I created a real instrument track on a new project in GB and set the input to channel 1 (mono).
    I play a track..... no sound. nothing at all. i tried the inputs in the back of the firwire and played with the gains. still nothing. i am getting a little frustrated here as you can imagine.
    I would really appreciate if someone could walk me through this or at least point me in the right direction.
    Thanks a ton in advance.
    Message was edited by: defman13

    Perhaps you may need to reinstall the driver again from the M-audio website. The newest drivers don't work well but if you're running the newest OSX 10.4.10 then you have no choice but to use the newest drivers. When installing the new driver, do not have the 410 hooked up to the computer. After it is installed, shut down the computer. Hook up the 410, then turn the computer on, make sure teh 410 is power button is on as well. Once you're computer is up and running, open up the m-audio mixer application that comes with the driver. on the top right-hand corner is a reset button. Click that and a there will be a popup asking if you want to reset, say reset. Next open up system preferences and check the sound. Select the 410 for input and output. You have to also do this again in garagebands prefs. Test your audio out by playing a song through itunes or something. Hope it works.

  • Noise coming through Firewire audio interface (M-Audio Firewire 410)

    I have an Intel 20 inch Core Duo iMac with an M-Audio Firewire 410 audio interface attached to the 800 Firewire port. The Firewire 410 seems to be working fine. However, I have a very annoying problem with noise. A fairly loud hum is coming through.
    I'm pretty sure the noise is originating in the iMac. If I press on the LCD monitor or squeeze the case around the middle of the iMac, the hum diminishes. Sometimes when I do this, the hum diminishes but a buzz then becomes audible.
    The iMac and the Firewire 410 are plugged into the same outlet.
    I have a friend with the same setup who claims his is dead quiet. Does anyone here know what could be causing this and how I can fix it?
    Intel iMac   Mac OS X (10.4.6)  

    Any more news on this? I have the exact same problem, and the problem exists with a couple of firewire devices. I'm currently using a Behringer F202 (or something similar), but I had the same problem with a Firewire 410. I'm running Leopard, but I know the problem isn't related to the OS.
    See - I have my FW interface hooked up to an external mixer - when I plug it into my iMac, I get the noise..this happens EVEN IF MY iMAC IS SHUTDOWN. I've tried using the external power supply for my Audio Interface, as well as running off of bus power to no avail. It is definitely a problem with the iMac itself.
    I've ordered a FW Hub, and I'm going to try using the audio device through that next. I don't want to do this, but I also have a USB Audio device that I use for other things, and I found that it behaved much better when connected to a hub vs the the USB port on the back of the iMac directly. It seems obvious to me that the iMac has some weird power-shielding problem or something of that nature, so pulling it off to the hub which has its own power supply will hopefully help.
    I do have AppleCare protection, so, my next step is to call them out.

  • Help! My Macbook Pro will not recognise my M-Audio Firewire 410 interface

    Hi
    I'm new here and fairly new to Macs having only recently bought a Macbook Pro.
    My plan is to use the Macbook primarily for music but I can't get my M-Audio Firewire 410 audio interface working.
    I have installed the latest Intel driver but when I plug the interface in, the Mac does not recognize it at all. I have tested the port/cables etc, and can successfully play music from an external firewire HDD chained through the Firewire 410.
    How is it possible that the Mac doesn't even know the interface is there (when I click on the M-Audio software icon I get this message "No M-Audio Firewire device was found connected to this Mac") yet I can play music chained through the device?
    I have tried both with, and without, the external power supply connected to the Firewire 410 and also tested it on my PC where it works as usual. And I've tried deleting and reinstalling the driver....(I thought this was PC only territory!)
    Any ideas? I really want to get back into music and my past (bad) experiences with PCs drove me to the Mac...
    Many thanks in advance
    Macbook Pro 2.16 Core 2 Duo   Mac OS X (10.4.8)  

    Try v1.8.2 instead of v1.7.2 of M-Audio's driver setup.

  • Installing m-audio firewire 410

    i just bought a m-audio firewire 410 soundcard. to make sure i would install it properly, i followed every step of the user manual. still, it's not working. the blue LED light keeps flashing, my mac is not even detecting the soundcard.
    i don't know what to do...
    please help!!!!

    from my understanding, the bluetooth device is not getting power and that could be various reasons. it's dying, you have some new installed hardware that is draining from the bluetooth power thingy. haha. but yea, if you were able to the power manager reset, then it was just a minor draining thing.
    this thing happened to me when i had a bluetooth mouse, usb mouse, mbox, external monitor, usb keyboard, iLok usb dongle, usb hard drive all plugged in. hahaha. my computer was like, are you serious! but after all of that craziness. i reset, and it's fine!
    later

  • M-Audio Firewire 410.....

    I've recently purchased an M-Audio Firewire 410 after using a n M-Audio firewire Solo for ages and being very happy.
    Whoa! The Mac ( intel iMac) doesn't even want to acknowledge the presence of the 410, let alone Logic have a go.Jim
    I think I'm stuedf.........any magic answers?

    Just a note to all those others who have or are considering the 410. I have a 410, which I was using on my old PC. It wasn't working on my new 24" iMac. I called M-Audio and they said that their driver needs to be updated, and it should be out in a few weeks. From other threads I've read, this is what they were saying a few weeks ago.
    I say this to save some of you the frustrations of getting your 410 to work with a core 2 duo running 10.4.7. Don't waste your time. Either wait for the driver to come out, or switch.
    I'm getting really tempted to switch to Presonus.

  • M-Audio Firewire 410 & GB 2 not working

    I am having a problem trying to get the M-Audio Firewire 410 to work with GB 2... I keep getting a dialog box reading... 'Check other applications using Timer or MIDI (code 0)
    Can anyone point me in the right direction to make these to work together?
    Thanks !

    I have downloaded the latest driver that but now unable to open GB2 ???
    Very strange. I have no clue what is going on with this Firewire 410.

Maybe you are looking for