Trouble Moving Audio With Video In Timeline

I'm new to Premiere Pro CS3, coming from Final Cut Pro 4.5 and am having trouble finding the following in the Help File:
-When I grab a clip in the timeline, and try to move it up and over to a different spot in the timeline, only the video portion moves up. The Audio portion stays on the same track and superimposes itself onto other audio clips as I drag. In Final Cut Pro, the video rises to a differnet track and the audio lowers to a differnet track so there's no collisions. Is ther a way to do this that I'm missing?
Gracias.

For PrPro CS3, this post should be in THIS forum. I feel that the MOD's will be moving it for you, so you will know where to find it, once they do.
Now, for the Audio issue, what is the channel-count of the Audio Stream? In PrPro, Audio will ONLY go to an Audio Track, that matches the channel-count of the file, i.e. mono only to 1-channel Audio Tracks, stereo to 2-channel Audio Tracks, etc. This ARTICLE goes into more detail.
Now, when one brings a Clip w/ Audio onto the Timeline, from the Project Panel, the Audio will only go to the appropriate Audio Track, but if one does not exist, PrPro will create one of the appropriate channel-count, and it will be located just above the Master.
If one has the Clip on the Timeline, and they move it, its Audio will ONLY go to an Audio Track with the appropriate channel-count. If, for instance, you have a mono Audio Stream (1-channel) and only oen mono (1-channel) Audio Track, that is where it will go. If you need it elsewhere, because the now location already has Audio on that one Track, you just need to create another mono Audio Track.
One can also Lock Tracks, both Audio & Video, to keep the Clips on those Tracks "safe."
Hope that this helps, and good luck,
Hunt

Similar Messages

Moving audio with video clip

i tried to paste audio at playhead, but when i add a new video clip to the movie, the audio does not move with it. does anyone know how to help me!!!! please

When you lock the audio clip to the playhead, it won't move from the video point it was placed at. You need to UNLOCK those audio clips to allow them to move now. Really, you should get your video work in place first and then move/place your audio clips where you need them. That's the simpler way to approach this.
Re-reading your post again, it seems you haven't locked the audio to the playhead because adding video ahead should move everything together. Did you highlight the audio clips you wanted locked before clicking on "Lock to Playhead"? Play with it some more, you'll get it, or do what I suggest about adding the audio after.
Message was edited by: Forest Mccready

Trouble moving audio from VIEWER to TIMELINE

I edited my audio track and it's in the viewer, I want to overwrite it to the Timeline.
The book says use F10 to drop audio clip, but my laptops F10 mutes audio.
I do not want to change my keyboard functions, what other way can I do this?

As Michel said, you should first make sure Expose and Spaces are not assigned to use the F10 key in System Preferences. Unless you use the "show all windows of this application" shortcut often, you can still easily access Expose by hitting your F3 key. Then, it should be a simple matter of clicking the "Fn" key at the same time as F10 in order to overwrite (e.g. Fn-F10).
It's impossible to remap the shortcut in FCE, the only way to use it on newer Mac keyboards is as described.
Sasha

No audio with video, website navigation impaired, I can no longer recommend Firefox

I maintain the video site shaleshockmedia.org. I can no longer recommend Firefox to viewers because of the severe problem I have been experiencing: No audio with video; navigation often does not work. Maybe this is purely a local problem. Please let me know if the site is fully functional or not when you go there. There is no problem with Chrome or Safari. My computer is a Macbook Pro 3,1 Intel Core 2 Duo. MacOs 10.6.8

Note that there are a lot of popular extensions that can cause issues with videos not working apart from issues with the Flash plugin.
In what way is the navigation not working properly?
Can you give some examples?
Start Firefox in [[Safe Mode|Safe Mode]] to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
Check for problems with current Flash plugin versions and try these:
*disable a possible RealPlayer Browser Record Plugin extension for Firefox and update the RealPlayer if installed
*disable protected mode in Flash 11.3 and later
*disable hardware acceleration in the Flash plugin
*http://kb.mozillazine.org/Flash#Troubleshooting

Syncing External Audio with Video on iMovie

If syncing external audio with video on imovie, once successfully syncing the 2 is it possible to permanantly merge them so that I can continue trimming and rearranging clips without having to continue to re-sync the audio and video after every change I make?

In Final Cut Pro X, yes. In iMovie...no.
The workaround in iMovie is to sync your external audio to the video clip. Mute the audio on the video clip so all that is left is the good audio. Then use SHARE/EXPORT TO QUICKTIME. Choose Movie to QuickTime Movie and under Options choose Apple Intermediate Codec as the Video Codec.
Then save this clip in a place you can find it. Finally, import this new clip back into your event.

Best way to sync (shift to match) audio with video in FCE 1.01?

What is the best way to sync (shift to match) audio with video in FCE 1.01?
Step by step in simple wording please, since I am new at this.
Thank you so much.
Walter

As you probably know by now, DVD camcorders are not compatible with FCE or pretty well any other DV based editing system.
Possibly the simplest (though not cheapest) route would be by using an Analogue-Digital converter.
Streamclip and other similar programs are supposed to work but I have had no experience with them.
In the long run probably the best (but costly) solution would be to buy a Mini-DV camcorder - it doesn't have to be a top of the range model - even the cheapest ones can produce high quality video. Then you would not have to mess around converting DVD files with the inevitable loss of quality it entails.
A cheap DV camera need be not much more expensive than an A/D converter.
Ian.

TS1382 does the latest ipod classic play audio with video on an alpine ive-w530abti head unit

does the latest ipod classic play audio with video on an alpine IVE-W530ABTi head unit

According to the compatibility chart on this page, yes it does.
http://www.crutchfield.com/S-OhTD03kplzN/p_500IVEW530/Alpine-IVE-W530.html#detai ls-tab
B-rock

Audio out of sync with video in timeline SOLVED

The audio and video are in sync when playing .MP4 video (but may apply to other video files) in the Premiere Pro viewer and Windows Media Player and VLC however, as soon as you drag the clip into the timeline it goes out of sync. Since it took so much time for me to figure out how to get around this problem I wanted to share this, ESPECIALLY For all the people who are semi Adobe Premiere noobs (with no disrespect, I fall into this category) at this and google isn't helping to figure out why this is happening I'll give you the easy fix. For all the people in this forum who are going to ask the detailed information, codecs, etc. I'll give that as well.
FOR THE NOOBS:
All the information I've read online all seems to point that the timeline sometimes doesn't like certain audio contained in the video. It conforms incorrectly, etc. Personally, it doesn't make any sense to me. Forget all that.. you just want to get on with your project.. to heck with the details, you're tired of googling. Here's the solution I found. Extracting the audio from the problematic video file outside of Adobe Premiere. I use avconv, because it's free, open source, and you won't lose audio quality. Then linking that audio with the video in Adobe Premiere.
First if you are using a windows 32 bit computer download avconv here: http://win32.libav.org/win32/
If you are using a windows 64 bit computer download avconv here: http://win32.libav.org/win64/
go to the bottom of the page and click on the newest date version. DISCLAIMER: This is open source software. It's free. I didn't make it so I'm not trying to sell you anything.
It's a zip file so you will need to use winzip or 7zip to uncompress it. You can't just click on the installer. You can uncompress and save the program wherever you want on your computer. Say you didn't pay attention and you automatically saved it in the default spot in your downloads folder. The place you'd find the program might look like this if you're on a 64 bit computer:
C:\Users\youruseraccountname\Downloads\libav-9.7-win64 If you're on a 32 bit computer it will probably look like this C:\Users\youruseraccountname\Downloads\libav-9.7-win32
Just make sure you know where it is located and copy it down in notepad. If you can't find it, do a search on your C: drive for avconv .For this forum thread we will assume you have saved avconv in the downloads folder and you're on a 64 bit computer.
Click on the Windows key on your keyboard. Type in Run and then press enter. Type in CMD and press enter. This will open up windows command line. Don't worry, it's not as scary as you think.
Now hold down the Windows key and press E. This will open up a windows explorer window for you to find the video file you are having issues with in Adobe Premiere. Once you have found the file, copy the location of the file. So.. if your file was here: c:\Users\youruseraccount\videos\yourvideo.mp4 you would see that at the top of the windows explorer in what's called the address bar. Copy that. Paste it into your notepad.
Now switch back to the windows command line window. Now I'm going to have you type a command into the windows command line but before you do I want you to understand how to type it in.
#1. Do you know the exact path (location on your computer) where you installed avconv?
#2. Did you copy the exact path (location on your computer) where you have your video file?
If so.. type in the command below but change it with the information you have above
C:\Users\youruseraccountname\Downloads\libav-9.7-win64\usr\bin\avconv.exe -i "c:\Users\youruseraccount\videos\yourvideo.mp4" -vn -qscale 1 "c:\Users\youruseraccount\videos\yourvideo.wav"
So let's break it down so you understand and help troubleshoot any issues you may have.
C:\Users\youruseraccountname\Downloads\libav-9.7-win64 this is the example location we said we installed avconv. The actual avconv.exe program is located inside that folder so the full path would be this: C:\Users\youruseraccountname\Downloads\libav-9.7-win64\usr\bin\avconv.exe
-i just tells avconv what the input file is.
"c:\Users\youruseraccount\videos\yourvideo.mp4" is the path (location on your computer) where your video file is.
-vn just tells avconv you only want to extract audio from the video
-qscale 1 just tells avconv you want the best quality
"c:\Users\youruseraccount\videos\yourvideo.wav" just tells avconv the path (location on your computer) and the name you want to give the audio file you're taking from the video. This will save the audio wav file to the path (location on your computer) where the problematic video file is saved.
Once you have the audio wav file import it into Adobe Premiere. In the timeline, unlink the audio from the mp4 (or whatever video file you have). Highlight the now unlinked mp4 audio and delete the audio. Then bring your audio wav file you created using avconv and bring it onto the timeline at the start of the video. Now link it. Hopefully that did the trick.
If you have any questions regarding the command line or installing avconv please feel free to comment and ask. I'm pretty good at windows command line and can probably help identify what the issue is.
FOR THE INFORMED PREMIERE PRO USERS:
Here are the details of the problematic video file that I had this issue with. This is from avconv:
Metadata:
    major_brand     : mp42
    minor_version   : 1
    compatible_brands: mp42mp41
    creation_time   : 2013-05-12 11:45:32
Duration: 01:58:28.24, start: 0.000000, bitrate: 3256 kb/s
    Stream #0.0(eng): Video: h264 (Constrained Baseline), yuv420p, 1280x720, 2997 kb/s, 25 fps, 25 tbr, 25 tbn
    Metadata:
      creation_time   : 2013-05-12 11:45:32
    Stream #0.1(eng): Audio: aac, 48000 Hz, stereo, fltp, 256 kb/s
    Metadata:
      creation_time   : 2013-05-12 11:45:32
I don't know the type make/model video camera that was used or if it was converted before being given to me. This is just what i had to work with and the solution I found to fix it.

if you are using a windows 32 bit computer
Then you won't be using anything above Premiere Pro CS4, and this thread would be in the wrong section.
By the way, the process is significantly easier using something like Xvid4PSP, which can strip out the audio using a fairly easy to understand GUI, as wel as convert those oddball videos into something PP can handle.
http://www.videohelp.com/tools/XviD4PSP (Use version 5.)

No audio with video Premiere 11, distorted work area

I downloaded Premiere 11 onto my Macbook Pro. I have 2 issues, I have no audio on videos or with narration. Mp3's play fine. When I bring media into the work space, every thing is distorted and I can't see where I am dropping it or what I am doing with it. We have Premiere 11 on my husbands Mac and it works fine. Any help would be appreciated.

nursesharonhaz
Thanks for the details. Moving forward...assuming that all new projects behave the same with regard to your problem media in your Premiere Elements 11 Mac.
1. Narration. Please create a .wav narration clip in the free audio editor named Audacity and import them into Premiere Elements 11 Mac with the project's Add Media/Files and Folder/Project Assets from where you drag it to the Timeline Narration Track.
2. MOV File. What is the brand/model/settings for the camera that recorded that video?
Double check to assure that you have the latest version of QuickTime installed on your computer with Premiere Elements 11 Mac.
How does the editing workspace distorts weirdly when the .mov file is dragged from Project Assets to Video Track 1 of the Timeline?
Do MaxBook Pro have themes as does Windows (Aero, Basic, and High Contrast)?
3. Miscellaenous. Delete the Adobe Premiere Elements Prefs file in the 12.0 Folder
Users\Libraries\............\Adobe\Premiere Elements\12.0
For Mac, I am not sure if the ......is Preferences or Application Support
I am wondering about your Intel Iris video card/graphics card. Need to find out if there is any history on that with Premiere Elements.
If none of the above presents as contributing to the core issue, then let us try downloading a new source of installation files. Please do so from
the following web site. We will be using installation files for Premiere Elements 11 tryout into which you can insert your purchased serial number.
Photoshop Elements 11 Direct Download Links: Free Trials, Premiere | ProDesignTools
You can also look at the Premiere Elements 12 tryout to determine if there is any difference in behavior between 11 and 12.
Adobe Photoshop Elements 12 Direct Download Links, Premiere too | ProDesignTools
Let us see if any of the above has any impact on your situation.
Thanks.
ATR

No audio with video chat, but can audio chat!

When I video chat, I don't get or receive audio. Neither does the person I'm "chatting" with. I can audio chat with that person... no problem. But the combination video and audio is a bust. And here's the kicker: it's only when I'm chatting with a particular person. With others, the audio and video combo works perfectly. And to top it all off, this person can audio/video chat with others just fine too! Any hints? My OS X and router firewall are both inactive.
My computer:
QT streaming: 1 Mbps cable
OS X firewall: off
Modem: D-Link cable modem (DCM-201)
Router: Belkin 802.11 wireless router (Model # F5D6231-4)
- firewall is off
- not in bridge mode
No iChat add-ons
Connection speed: 4175 Kbps down, 302.3 Kbps up
Will work on getting the other person's info... I know they're on a MacBook Pro as well. Seems more like a bad preference file or something to me as this person is the only one I have trouble with and vice versa. Thanks for any help!

Hi MizzouHusker,
Thanks for starting a new thread.
Is the Modem in Bridge mode ?
Or is it doing DHCP ?
What ports are opened in either device ?
Do either have UPnP ?
With those speeds you can set Quicktime to 1.5meg
It will need you to restart iChat to see the new speed.
If devices use NAT you can have problems if the devices at either end do not like the NAT method used (there are about 6)
UPnP will get around this.
4:26 PM Thursday; July 13, 2006

Sync Music audio with Video Audio PE10

Hi.
I am new to Premiere elements 10 (Changed from Corel to Adobe, so i'm not new to video editing, but I'm not used to PE10).
I am filming a lot of my daughters Circus performances, so very often I find the music number used at the performance and merge that with the video audio in the project.
But I have a problem syncing the music from the audio track on the video with the seperate music track.
So to specify: I want both Audio tracks running at the same time, so that I keep the clapping and the whisteling from the audience, but get the better quality of the music from the external file merged with the music in the video-audio-clip.
Is there a special tool or can someone help me with a special tecnique?
Regards Settemand

Along with the instructions offered above, when nudging the Audio, I would make sure that Snap is OFF, as Snap will try to align your Audio with the beginning (Head), or end (Tail), of you Video Clips. That is useful for many editing operations, but for nudging Audio will frustrate you. The Snap function is a toggle with the S key. Just do not forget to turn it back ON, when done.
Also, though the Soundtrack Audio Track seems to be the ideal location for your extra music, some users have experienced issues, when using it, or the Narration Audio Track. While it seems that those issues are Project-specific, and those Tracks often work well, to keep from being tripped up later, I recommend putting your music on a free Audio Track, such as Audio 2 - just to be safe.
Also, with either an Audio, or Video Track, you can Zoom IN/OUT horizontally with the Timeline Zoom slider, AND can also Zoom IN/OUT vertically, by going to the Track's Header (where the Track Name is located), then hovering your cursor over the little line between the Track, until it changes to an equal sign with up/down arrows, then click+drag, to enlarge the Track (and the Clip display) vertically. I find that this makes viewing the Audio Waveform Display easier, and the peaks are more obvious. When done, you can just reverse that operation to Zoom OUT on the Track vertically, so that it looks like it did, before you started.
Good luck, and this FAQ Entry might be useful, though it talks about OOS (Out Of Sync) Audio, the functions are the same for syncing additional Audio: http://forums.adobe.com/thread/436751?tstart=0
Hunt

No audio with video in itunes

Hi, no matter what I do, the audio won't play with the video when in itunes, regardless if it's a file I converted to m4v or if it's a video file I purchased and downloaded from the itunes music store like "alias" episodes OR if I'm just previewing streaming music videos from the itunes music store...no audio period. The purchased downloads that are synched to my ipod will play the audio with the video on the ipod and the mp3 songs play fine within itunes and the ipod, just the audio for the video doesn't seem to work at all. Any help here?
PC Windows XP

had the same problem...recently upgraded itunes, now video did not play audio.
Found this info on the web, and it solved my problem:
http://www.smartcomputing.com/editorial/article.asp?article=articles/archive/r10 04/44r04/44r04.asp&guid=
"Problem: You have the latest version of iTunes and QuickTime and you still don’t get audio from iTunes.
Solution: Open the QuickTime Player and go to the Edit menu to choose Preferences, then QuickTime Preferences. Click the resulting dialog box’s Audio tab, then select the Safe Mode (waveOut Only) checkbox. Click Apply, reboot your system and try playing media in iTunes again."

Flash 9.0r48 no audio with video

I have just downloaded and installed the latest Flash player
on my system (Red Hat Fedora Core 3 Linux, AMD Athlon 64 (cpuid is
x86_64)).
This version has exactly the same problem that earlier
versions had, namely that there is no audio (sound) with the videos
on sites such as YouTube and CNN.com.
I have fixed the problem by reverting to Flash 7.0r25, which
works perfectly.
Does Adobe intend to fix this problem?

Note that there are a lot of popular extensions that can cause issues with videos not working apart from issues with the Flash plugin.
In what way is the navigation not working properly?
Can you give some examples?
Start Firefox in [[Safe Mode|Safe Mode]] to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
Check for problems with current Flash plugin versions and try these:
*disable a possible RealPlayer Browser Record Plugin extension for Firefox and update the RealPlayer if installed
*disable protected mode in Flash 11.3 and later
*disable hardware acceleration in the Flash plugin
*http://kb.mozillazine.org/Flash#Troubleshooting

No audio with video recordered by camera

Hello!
I have problem with recording a video by camera, there is no audio or any clear sound for the video i have recorded!!
Help please!

Note that there are a lot of popular extensions that can cause issues with videos not working apart from issues with the Flash plugin.
In what way is the navigation not working properly?
Can you give some examples?
Start Firefox in [[Safe Mode|Safe Mode]] to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
Check for problems with current Flash plugin versions and try these:
*disable a possible RealPlayer Browser Record Plugin extension for Firefox and update the RealPlayer if installed
*disable protected mode in Flash 11.3 and later
*disable hardware acceleration in the Flash plugin
*http://kb.mozillazine.org/Flash#Troubleshooting

CS4 not exporting audio with video

For a while now I've been working on a video for my class, mish-mashing together a bunch of smaller .avi files into a cohesive whole. Everything inside of Premier works perfectly. I edited the audio tracks with Soundbooth, so now they are .wav. When I export the video, first I tried MPEG4 and messed around with a lot of settings. After this didn't work, I searched around and discovered that Premiere occasionally doesn't like it when you change the pre-set settings, so I switched to H.264 High Quality and exported with that. Same deal: the video works fine, no audio. And yes, I made sure to check the box that says "audio and video" and not just video.
In short: How do I get Premiere CS4 to export my audio and video when I tell it to?

I used no special setting. I even tried to just export audio. Still no audio. I checked the file with GSpot, it shows that it has audio.
Then I though I just went ahead an encode this and output to DVD as a test. It is indeed still no audio when playback on home dvd player.

Trouble Moving Audio With Video In Timeline

Similar Messages

Maybe you are looking for