Trouble multicasting from server
Hi all,
I'm trying to get multicasting to work, but I have trouble when I try to run it from the server, both using the manual method (console commands) and when using ZCC.
I first thought it was a firewall issue or something, since the server is on its own vlan. But I put the workstation(s) on the same vlan, and I still can't get it to work. The workstation(s) simply doesn't register with the server, it's just "waiting for the master".
I can, however, use a workstation as a master and run multicast to other workstations that way, but I would very much appreciate any input on this.
Regards,
Pr
di6parn,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://forums.novell.com/
Similar Messages
-
Trouble playing music from server after moving house
the music i play in itunes is stored on a different pc, we have a 'music server'. so when i first installed itunes, i imported them and had no trouble whatsoever.
a month ago we moved to a new house, and last week we finally had our pc's ready to use.
my boyfriend had some trouble with the server, but its working now.
the only thing is, that when i want to play a song, i get the popup saying: 'the song .... could not be used because the original file could not be found. would you like to locate it?'
i can locate the song and then it will play, but we have about 18000 songs on the server... there must be a quicker way than locating all songs one by one.
help us!Hi Michale
Yes im the same person, one account at work one at home. Now i ahev done everything you suggested and still no joy. One thing i have noticed though is that any of my ibooks can share each others music, great that is what i want but on my server. Now i have a server and an intel mac mini both plugged into my router via ethernet, i cannot share any music via itunes from any of the ibooks that use wireless connection. I have an airport express that is also plugged into my router, thus i get my complete network.
I can see for looking why this is not happening, i really would love to stream my, vidoe, pics and music from a central server in my house.
The server is running OSX Tiger 10.4.5 server edition. now when i go into the sys prefs on the server i dont have the option of firewall. As i think as it is a server edition you have use the Firewall in server admin, i have turned this on and clicked in itunes in it and still no joy.
Any ideas.....help -
Hi,
I'm testing multicast from my oes linux sp2 zdm7sp1
starting multicast session from the command line works ok
( /opt/novell/zenworks/preboot/bin/novell-zmgmcast -mcast SESSION1 ....)
but trying to start it from C1, going to the server object, multicast
session, add, specifying my filename, nothing happens on the client...
can't join the multicast session.....
troubleshooting steps ? bug ?
MarcOn Mon, 23 Oct 2006 21:23:27 GMT, Marc-Andre Vallee wrote:
> After checking some tids and docs, I found that to image on multicast
> from C1, we need to use img auto, not img session SES1
yes.. the img s SES1 would only come in if you would setup the multicast
session manually on the server itself..
Marcus Breiden
If you are asked to email me information please change -- to - in my e-mail
address.
The content of this mail is my private and personal opinion.
http://www.edu-magic.net -
Having trouble switching from Core to GUI with Server 2012...
Hello,
I am currently in the early stages of studying for the MCSA - Windows Server 2012 R2 and I'm playing around with an Eval copy of Windows Server 2012 R2 DataCenter. I have two separate installs where one is the Full - GUI install and the other is Server
Core. I've learned in my studies that it is possible to switch back and forth between Core and GUI through Powershell cmdlets.
Right now I'm trying to switch from Server Core to GUI and I'm using the following Powershell command:
Install-WindowsFeature Server-Gui-Mgmt-Infra, Server-Gui-Shell
It starts off like it's going to work but then after about 68% of the way through, I get this:
Install-WindowsFeature : The request to add or remove features on the specified server failed.
Installation of one or more roles, role services, or features failed.
The source files could not be downloaded.
Use the "source" option to specify the location of the files that are required to restore the feature. For more
information on specifying a source location, see XXXXXX. Error: 0x800f0906
At line:1 char:1
+ Install-WindowsFeature Server-Gui-Mgmt-Infra, Server-Gui-Shell
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : InvalidOperation: (@{Vhd=; Credent...Name=localhost}:PSObject) [Install-WindowsFeature],
Exception
+ FullyQualifiedErrorId : DISMAPI_Error__Cbs_Download_Failure,Microsoft.Windows.ServerManager.Commands.AddWindowsF
eatureCommand
Any ideas? I installed this Server Core image on a Hyper-V Virtual Machine (using Generation 2), allocating 4GB RAM and 65GB HDD space. I haven't done anything with .Net Framework and I haven't configured the network at all.
Any advice would be greatly appreciated.Hi SLONER,
You need use the -source option on a non-Internet connected machine.
PLease try the script below:
Install-WindowsFeature Server-Gui-Mgmt-Infra,Server-Gui-Shell –Restart –Source c:\mountdir\windows\winsxs
And follow this thread:
PowerShell to Add GUI to Server Core (ServerCore-FullServer)
I hope this helps. -
Trouble connecting to RAS from Server 2012
http://devlibrary.businessobjects.com/businessobjectsxi/en/en/RAS_SDK/rassdk_net_doc/doc/rassdk_net_doc/html/BindingScenarios16.htmlHello
Hello All,
I have been migrating a web application from Server 2003 to Server 2012. The only part that does not seem to work correctly is the Crystal Reports. I have Crystal Reports 10. When I try to create a session and pull down a report, the web application crashes and does not give me an error. I have tried stepping through the debugger and looking at the event logs and I am not gleaning any useful information. Oddly enough when I pull a report from our RAS and put it on the new web server and make a web form that loads it from locally (embedded) it works, but point it to RAS and it crashes every time. The code that pulled from RAS worked just fine on our 2003 server. The original developer appears to have used the code at above link to load reports from RAS.
Is connecting to RAS supported in Crystal 10, IIS 8, and Sever 2012?
Is there a special permission that needs to be set up on the RAS server or in the Server 2012 web server?
Is there any reason I should change the code or anything else I need to install on the Server 2012 web server beyond installing Crystal 10?
Any tips for fixing or troubleshooting this? I am getting close to scrapping the RAS server though I really don't want to do that.Hi Robert,
Crystal Reports 10 and it's SDK packaging is NOT supported on Windows 2012. OS is new, CR 10 is about 5 years old and had no concept of that OS.
The link is simply to the SDK help file so not clear on what BOE Server you are using either.
There are upgrade paths to follow but need more info...
Also, I moved your post to the .NET Forums.
Don -
Can't create a new account at ePrintCenter - trouble with the server for 2 weeks.
Hi. I'm trying to create an account at ePrintCenter and all the time getting mesage 'Возникла проблема с сервером. Проблема будет устранена в ближайшее время. Приносим извинения за неудобства.' (A trouble with the server, wait, bla bla bla). When will it be fixed?
For those who are experiencing ongoing issues with their web services, you can attempt to try the following steps that may help resolve your problems.
1.) Completely shut down your printer and restart it
2.) If you have prints that have not printed, log into ePrint Center (or create an account if you do not have one) and then look for your printer status. If printer status is green but you still have pending jobs, delete the pending jobs one at a time (Starting with the oldest first). There may be a print job stuck in the queue that further restricts other jobs from completing.
a. If option 1 or 2 above still doesn’t work, removing web services and re-adding web services will cause the printer to reattach to the cloud.
b. Please note that if you attempt option 3, you will get a new eprint email address (and lose your custom one with no ability to get it back) furthermore, you will need to re-add your printer back to your ePC account.
I am an HP employee -
No Response from Server at end of day: 4.03
We're using Weblogic 4.03 on Solaris. At the end of a busy day, users
start submitting their transactions and some users start calling the
help desk saying that performance is very slow and I believe they are
getting "No Response from Server" from their browser.
We think it's the number of Execute Threads defined. I have provided
the settings when we received HelpDesk calls. We have also modified the
settings as mentioned below.
Some questions.
When does an Execute thread get used?
Can an execute thread be used for a long period of time (many seconds)
based on weblogic property settings?
Do the keepAlive properties keep a thread alive?
Does a connection keep a thread alive?
Does anyone know a way to monitor thread usage in 4.03?
In what situations can a connection use more than 1 thread?
Does anyone think we're on the right track?
We have defined the JRE to have a 64 meg heap.
We looked at the T3AdminMain console and at one point and saw 27
connections being used. It's hard for us to determine if this was the
high point for the day. We're not sure how to capture this type of
info. We're thinking if there were 27 connections and each of those
connections was somehow using 2 threads, this might explain the problem.
About our application, we have HTTP and HTTP requests coming through a
browser client and we also have a Java UI client executing T3s
connections.
The browser version sees a user login to the application without being
timed out for 20 minutes (1200 seconds). We have reduced this to 900
seconds.
Basically, we're not sure how Weblogic handles threads based on the
properties we've used. We have looked for documentation on this, but
have not found any. Any help would be much appreciated.
Please reply to my email id as well, if that's not too much trouble.
Thanks in advance for any help...
Mike
Here are some of our property file settings when we received the
problem:
weblogic.httpd.http.keepAliveSecs: 60
weblogic.httpd.https.keepAliveSecs: 360
weblogic.httpd.session.cacheEntries: 1024
weblogic.httpd.session.invalidationIntervalSecs: 60
weblogic.httpd.session.jdbc.connTimeoutSecs: 120
weblogic.httpd.session.swapIntervalSecs: 10
weblogic.httpd.session.timeoutSecs: 1200
weblogic.system.executeThreadCount: 42
weblogic.system.percentSocketReaders: 33
We have changed the settings below and restarted the server. We have
not received any feedback yet.
weblogic.httpd.http.keepAliveSecs: 30
weblogic.httpd.https.keepAliveSecs: 180
weblogic.httpd.session.timeoutSecs: 900
weblogic.system.executeThreadCount: 60I've read previous threads about the problem with 4.5 and the rebuilding of the
bean cache on each method call resulting in slowdown of the system over time. I
also see that patches have been provided. Is this also an issue with 4.0.3 and
have fixes been made there? We also are seeing significant degradation of
performance over time during our load testing and have been unable to determine
the cause. We are running on a 4 processor NT machine with 1 gigabyte of RAM.
When we see the degradation of performance, one processor is operating at 100%
and memory is maxed out.
Thanks,
Jim Gish
Venkatesh Iyer wrote:
Mike
To begin with, can you
a) please check the access.log to determine the the "arrival rate" of the
HTTP request. If the requests are not arriving fast enough, tuning WLS will
not help.
b) monitor the WLS server through the console to check the # of requests in
the queue waiting to be processed. This will give an idea of the potential
source of the bottlenecks in the system.
Mike Upton wrote:
We're using Weblogic 4.03 on Solaris. At the end of a busy day, users
start submitting their transactions and some users start calling the
help desk saying that performance is very slow and I believe they are
getting "No Response from Server" from their browser.
We think it's the number of Execute Threads defined. I have provided
the settings when we received HelpDesk calls. We have also modified the
settings as mentioned below.
Some questions.
When does an Execute thread get used?
Can an execute thread be used for a long period of time (many seconds)
based on weblogic property settings?
Do the keepAlive properties keep a thread alive?
Does a connection keep a thread alive?
Does anyone know a way to monitor thread usage in 4.03?
In what situations can a connection use more than 1 thread?
Does anyone think we're on the right track?
We have defined the JRE to have a 64 meg heap.
We looked at the T3AdminMain console and at one point and saw 27
connections being used. It's hard for us to determine if this was the
high point for the day. We're not sure how to capture this type of
info. We're thinking if there were 27 connections and each of those
connections was somehow using 2 threads, this might explain the problem.
About our application, we have HTTP and HTTP requests coming through a
browser client and we also have a Java UI client executing T3s
connections.
The browser version sees a user login to the application without being
timed out for 20 minutes (1200 seconds). We have reduced this to 900
seconds.
Basically, we're not sure how Weblogic handles threads based on the
properties we've used. We have looked for documentation on this, but
have not found any. Any help would be much appreciated.
Please reply to my email id as well, if that's not too much trouble.
Thanks in advance for any help...
Mike
Here are some of our property file settings when we received the
problem:
weblogic.httpd.http.keepAliveSecs: 60
weblogic.httpd.https.keepAliveSecs: 360
weblogic.httpd.session.cacheEntries: 1024
weblogic.httpd.session.invalidationIntervalSecs: 60
weblogic.httpd.session.jdbc.connTimeoutSecs: 120
weblogic.httpd.session.swapIntervalSecs: 10
weblogic.httpd.session.timeoutSecs: 1200
weblogic.system.executeThreadCount: 42
weblogic.system.percentSocketReaders: 33
We have changed the settings below and restarted the server. We have
not received any feedback yet.
weblogic.httpd.http.keepAliveSecs: 30
weblogic.httpd.https.keepAliveSecs: 180
weblogic.httpd.session.timeoutSecs: 900
weblogic.system.executeThreadCount: 60
[jgish.vcf] -
[HELP] : error when restore data from server A to server B
Hello,i have troubles when restore FULL BACKUP from server A to Server B Please help me
when i Backup Full from server A ,i copy that Backup files to Server B (aa new server),i restore spfile và control file from BK files,then i mount (alter database mount ) to restore database , it show error message ORA-01103: database name 'ORCL' in control file is not 'DUMMY' , i tried to shutdown immediate and then startup mount again , but it show other error message RMAN-04014: startup failed: ORA-00845: MEMORY_TARGET not supported on this system
Please help me
Thank a lotFilesystem 1K-blocks Used Available Use% Mounted on
shmfs 2097152 157532 1939620 8% /dev/shm
please give me answer a question : now , i have pfile initDUMMY.ora
DUMMY.__db_cache_size=13287555072
DUMMY.__java_pool_size=134217728
DUMMY.__large_pool_size=67108864
DUMMY.__oracle_base='/u01/app/oracle'#ORACLE_BASE set from environment
DUMMY.__pga_aggregate_target=13757317120
DUMMY.__sga_target=20602421248
DUMMY.__shared_io_pool_size=0
DUMMY.__shared_pool_size=6845104128
DUMMY.__streams_pool_size=67108864
*._controlfile_enqueue_timeout=1800
*._kill_controlfile_enqueue_blocker=FALSE
*._kill_enqueue_blocker=1
*.audit_file_dest='/u01/app/oracle/admin/DUMMY/adump'
*.audit_trail='db'
*.compatible='11.2.0.0.0'
*.control_files='/u01/app/oracle/product/11.2.0/db_1/dbs/control01.ctl'
*.db_block_checking='TRUE'
*.db_block_checksum='TRUE'
*.db_block_size=8192
*.db_domain=''
*.db_flashback_retention_target=10080
*.db_lost_write_protect='NONE'
*.db_name='DUMMY'
*.db_recovery_file_dest='/u01/app/oracle/fast_recovery_area'
*.db_recovery_file_dest_size=1099511627776
*.db_ultra_safe='DATA_AND_INDEX'
*.diagnostic_dest='/u01/app/oracle'
*.disk_asynch_io=TRUE
*.dispatchers='(PROTOCOL=TCP) (SERVICE=DUMMYXDB)'
*.log_archive_dest_2='SERVICE=svrhst LGWR SYNC AFFIRM DELAY=0 OPTIONAL REOPEN=5 MAX_FAILURE=3'
*.log_archive_dest_3='SERVICE=exthst LGWR SYNC AFFIRM DELAY=0 OPTIONAL REOPEN=5 MAX_FAILURE=3'
*.log_archive_dest_state_2='ENABLE'
*.log_archive_dest_state_3='DEFER'
*.log_archive_format='%t_%s_%r.dbf'
*.memory_target=34359738368
*.open_cursors=5000
*.os_roles=FALSE
*.processes=1024
*.recyclebin='ON'
*.remote_login_passwordfile='EXCLUSIVE'
*.session_cached_cursors=256
*.sessions=2048
*.sql92_security=TRUE
*.undo_retention=2700
*.undo_tablespace='UNDOTBS1'
but i don't know why ? before i shutdown immediate (database states is nomount) , i show parameter MEMORY_TARGET , the value is 0 ?
Thank -
Migrating DC's from Server 2003 to Server 2008 Enterprise R2
I am in the process of testing a migration of our DC's to 2008 R2.
I've read countless articles, step by steps, etc, but am still having trouble deciding the best way to figure this thing out. Hoping that someone can give me some pointers on what might be the best way to do this. It should be fairly straightforward but
I am just unsure of how the fact that the two DC's being on different networks & the DFS will play in to things.
I currently have
(1) PDC residing in a colo (172.16.36.x) Server 2003
(1) Mail server residing in a colo (172.16.36.x) Server 2008
(1) DC residing in our office (172.16.35.x) Server 2003
These 2 different networks are connected by VPN from our office to the colo.
The DC in the office is running DHCP and DNS. It also acts as the File Server. The data is then being replicated using DFS from the office DC to the colo PDC.
We have purchased 2 new servers (physical) to replace the DC and PDC and also am installing Server 2008 R2.
From what I've gathered, I should join these new machines to the domain and begin migrating.
Step 1: Install Active Directory on new Servers, Install/Migrate DNS?
Step 2: Transfer Roles (Looking for recommendation as to which DC acts for which Role also, or should the PDC hold all roles?)
Step 3: Migrate files/shares and set up DFSR?
If anyone can offer some advice on how to make this as simple as possible I would greatly appreciate it!Thanks for the link. I've been able to successfully migrate almost everything over, just had a few questions about DFSR.
This is the scenario:
Server A (old file server, located in office)
Server B (old file server, located in colo)
Server C (new file server, located in office)
Sever D (new file server, located in office)
I have 2 servers currently. Both running Server 2003 (DFS) acting as file servers. Server A is the preferred connection when using DFS, so typically any changes from users will be made on Server A and then replicated to Server B. I've tested the File
Server Migration Toolkit to migrate files/shares over from server B to Server D, it seems to work fine. Now, I am not sure what the best way to migrate everything would be.
This was my thought process but I am not certain this is the best way/or will work as intended.
Use FSMT to copy all shares from Server A to Server C.
Plan for short downtime to copy all open files from Server A to Server C.
Map users to shares on Server C.
Begin replication from Server C to Server D. When complete map users to DFSR link.
Then take Server A and B offline.
Something I wasn't sure about is maybe using FMST to migrate things from Server B to Server D. Would it then compare to Server C through DFSR or does this replication have to occur "naturally"?
Something else I am a little confused about is when does DFSR start being used? Do the old servers have to be offline first? -
Passing Information From Server to GUI
Hi, I'm making a chat client, but I'm having trouble passing information from server's input stream to my GUI. I made two threads, one for sending and one for receiving, and I start them both when I click "connect" after I log in to the server. So what happens is I run my program, the frame appears as I want it to, and then I click connect, and after a little wait the button "unclicks" (or w/e) and nothing happens. I don't know why I am not receiving the messages from the server. If I make the program "GUI-less" it works, I can both send and receive messages via the console. But in the GUI, where I am sending/receiving via my two TextAreas, it doesn't work. Here's my code:
(I apologize ahead of time for posting so much code in a thread, I tried to cut it down as best as I could.)
actionPerformed method for connect and disconnect buttons (in BotWindow class)
public void actionPerformed(ActionEvent evt) {
JButton src = (JButton)evt.getSource();
if(src == connect) {
try {
bnet = new BattleNet("useast.battle.net");
bnet.logIn("dynobot1", "test");
catch(Exception error) {
System.out.println(error);
if(src == disc) {
try {
BattleNet bnet = new BattleNet("useast.battle.net");
bnet.logOut();
catch(Exception error) {
System.out.println(error);
BattleNet class
import java.io.*;
import java.net.*;
public class BattleNet extends SendAndReceive {
Socket sock;
InputStream in;
OutputStream out;
Send send;
Receive receive;
public BattleNet(String server) {
try {
sock = new Socket(server, 6112);
in = sock.getInputStream();
out = sock.getOutputStream();
send = new Send(this.out);
receive = new Receive(this.in);
catch(Exception error) {
System.out.println(error);
public void logIn(String username, String password) {
byte[] u = username.getBytes();
byte[] p = password.getBytes();
try {
out.write((byte) 0x03);
out.write((byte) 0x04);
out.write(u);
out.write((byte) 0x0a);
out.write(p);
out.write((byte) 0x0a);
receive.start();
send.start();
catch(IOException e) {
System.out.println(e);
public void logOut() {
try {
sock.close();
in.close();
out.close();
catch(Exception error) {
System.out.println(error);
SendAndReceive class (with Threads as subclasses)
import java.io.*;
import java.net.*;
import java.awt.event.*;
import javax.swing.*;
public class SendAndReceive implements ActionListener {
JButton src = null;
public SendAndReceive() {}
public void actionPerformed(ActionEvent evt) {
src = (JButton)evt.getSource();
class Send extends Thread {
OutputStream out;
SendAndReceive sr = new SendAndReceive();
BotWindow bw = new BotWindow();
public Send(OutputStream inputOut) {
out = inputOut;
public void run() {
if(sr.src == bw.submit) {
String newLine = "\n";
String messageOut = bw.inText.getText();
bw.outText.setText(bw.outText.getText() + newLine + messageOut);
byte[] m = messageOut.getBytes();
try {
out.write((byte) 0x05);
out.write(m);
catch(IOException e) {
System.out.println(e);
String blank = "";
bw.inText.setText(blank);
sr.src = null;
class Receive extends Thread {
InputStream in;
SendAndReceive sr = new SendAndReceive();
BotWindow bw;
public Receive(InputStream inputIn) {
in = inputIn;
bw = new BotWindow();
public void run() {
while(true) {
try {
bw.outText.setText(bw.outText.getText() + (char)in.read());
catch(IOException e) {
System.out.println(e);
}So, to repeat my questions, SendAndReceive class, but I'm not sure if this is the right approach.why isn't my TextArea (BotWindow.outText) not receiving and setting it's text to the information from the server? Is my threading correct? Also, with the way I set up the threads, will the Send function be able to send in the midst of the receive function? I tried to set it up so that it could by implementing ActionListener in my SendAndReceive class, but I am not sure if this is the correct approach.
P.S. The reason I put this in Swing is because it works without a GUI/Swing components! If it will help, I will post the GUI-less program I made that works.Multi-post. Reply to this posting: http://forum.java.sun.com/thread.jspa?threadID=656211
-
Hi,
I'm having trouble multicasting datagrams from the database. I have triggers that are firing, that call my java code. The java code does run, and the triggers complete successfully. However, no data is being multicast. There are no errors being returned. Any ideas?
Thanks.Hi,
I have the same problem. I'm reading your post after 6 years so I think in the while you propably have found a solution. Any suggestion for me?
Thanks.
Adriano -
How can I create a POP3 account on my iPad for Live Mail which doesn't delete mail from server?
Got a new iPad Air with iOS 7.1.1 tried to create a mail account just like the one on my iPhone 5. I selected 'Other' as mail account which allows me to edit the POP3 and SMTP settings. Think it sends mail ok need to check out receiving BUT there is no longer the option under INCOMING MAIL which says 'Delete from Server' which I have on my iPhone set to 'Never'.
Anyone know how or what settings to use for the iPad?
ThanksYes, you're correct this is only for existing users so if you don't have a Gmail account then do as shldr2thewheel suggested.
You'll then be able to link up to your Gmail account in your iPad once done.
Regards,
Steve -
I cannot send email from my ipad. Getting address is rejected from server message.
I cannot send email from my ipad. Getting address is rejected from server message.
Check the outgoing mail server setting. Make sure that your username and password are in there.
Settings>Mail, Contacts, Calendars>Your email account>Account>Outgoing mail server - tap the server name next to SMTP and check in the primary server and make sure your username and password are entered and correct - even if it says that the password is optional. -
Multiple pdf attachments from server folder using SO_DOCUMENT_SEND_API1
Dears,
I am trying to build a program able to send an email with multiple pdf attachments.
The files are stored in a folder in SAP server.
I am able to generate a pdf file from a spool and sucessfully attach it to the email using:
CALL FUNCTION 'CONVERT_OTF_2_PDF'
IMPORTING
bin_filesize = v_bin_filesize
TABLES
otf = job_output_info-otfdata
doctab_archive = it_docs
lines = it_lines
EXCEPTIONS
err_conv_not_possible = 1
err_otf_mc_noendmarker = 2
OTHERS = 3.
IF sy-subrc = 0.
LOOP AT it_lines.
TRANSLATE it_lines USING ' ~'.
CONCATENATE gd_buffer it_lines INTO gd_buffer.
ENDLOOP.
TRANSLATE gd_buffer USING '~ '.
DO.
it_mess_att_aux = gd_buffer.
APPEND it_mess_att_aux.
SHIFT gd_buffer LEFT BY 255 PLACES.
IF gd_buffer IS INITIAL.
EXIT.
ENDIF.
ENDDO.
ENDIF.
Internal table it_mess_att_aux is the parameter contents_bin of FM SO_DOCUMENT_SEND_API1.
I have now 2 files on a server folder which I would like to include as well.
I am reading the content of the pdf files in following way:
DATA: gd_buffer TYPE string,
OPEN DATASET lv_fileserver FOR INPUT IN BINARY MODE.
IF sy-subrc <> 0.
MESSAGE e257(zmsgsd) WITH lv_fileserver.
ELSE.
CLEAR: it_mess_att_aux[], gd_buffer.
DO.
READ DATASET lv_fileserver INTO gd_buffer.
IF sy-subrc <> 0.
EXIT.
ENDIF.
APPEND gd_buffer TO it_mess_att_aux.
ENDDO.
APPEND LINES OF it_mess_att_aux TO it_mess_att.
I do not understand the purpose of the statement:
TRANSLATE it_lines USING ' ~'.
in this context. Could anyone explain it?
All the files are attached to email with the desired name but corrupted and with the wrong size.
Can anyone help me build the logic to attach a pdf file from server in a email?
Thank you in advance,
Kind Regards,
João Cabritahi , try this ,it is working fine .
DATA: i_objbin LIKE solisti1 OCCURS 0 WITH HEADER LINE,
i_objpack LIKE sopcklsti1 OCCURS 0 WITH HEADER LINE,
i_reclist LIKE somlreci1 OCCURS 0 WITH HEADER LINE,
* wa_doc_chng LIKE sodocchgi1,
i_objtxt LIKE solisti1 OCCURS 0 WITH HEADER LINE,
* i_objpack LIKE sopcklsti1 OCCURS 0 WITH HEADER LINE,
i_objhead LIKE solisti1 OCCURS 0 WITH HEADER LINE,
i_tline TYPE TABLE OF tline WITH HEADER LINE,
i_record LIKE solisti1 OCCURS 0 WITH HEADER LINE,
wa_doc_chng LIKE sodocchgi1,
v_lines_txt TYPE i,
l_lines TYPE I VALUE '20'.
CALL FUNCTION 'CONVERT_OTF'
EXPORTING
format = 'PDF'
max_linewidth = 132
IMPORTING
bin_filesize = bin_filesize
TABLES
otf = int_tab_otf_final
lines = int_pdf_tab.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
*****************soc ranjan***************************
* IF full_path IS INITIAL.
* CALL METHOD cl_gui_frontend_services=>file_save_dialog
* EXPORTING
** WINDOW_TITLE =
** DEFAULT_EXTENSION = 'PDF'
** DEFAULT_FILE_NAME =
* file_filter = 'Portable Document Format (.pdf)' " for restricting saving file only as pdf
* CHANGING
* filename = file_name
* path = file_path
* fullpath = full_path
* IF sy-subrc <> 0.
** MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
** WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
* ENDIF.
* ENDIF.
******************eoc ranjan*****************
*break-point.
CONCATENATE full_path git_select_option-pernr INTO path SEPARATED BY '_'.
CONCATENATE path 'PDF' INTO path SEPARATED BY '.'.
** **************************for downloading*********************************
* CALL FUNCTION 'GUI_DOWNLOAD'
* EXPORTING
* bin_filesize = bin_filesize
* filename = path
* filetype = 'BIN'
* IMPORTING
* filelength = file_size
* TABLES
* data_tab = int_pdf_tab.
* IF sy-subrc <> 0.
** MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
** WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
* ENDIF.
CLEAR : lop , el , sl , cl .
* ******************addeddd later by ranjan 21.04.2011
DATA : desc TYPE char40 ,
desc1 TYPE char100 .
CALL FUNCTION 'QCE1_CONVERT'
TABLES
t_source_tab = int_pdf_tab
t_target_tab = i_record
EXCEPTIONS
convert_not_possible = 1
OTHERS = 2.
IF sy-subrc <> 0.
WRITE : / 'Error in conversion of pdf lines'(015).
ENDIF.
APPEND LINES OF i_record TO i_objbin.
*Creation of the entry for the compressed attachment
DESCRIBE TABLE i_objbin LINES bin_filesize.
i_objtxt = 'Hi'.
APPEND i_objtxt.
i_objtxt = ' '.
APPEND i_objtxt.
i_objtxt = 'Pls find the attached salary slip ' .
APPEND i_objtxt.
i_objtxt = ' '.
APPEND i_objtxt.
i_objtxt = ' '.
APPEND i_objtxt.
i_objtxt = ' '.
APPEND i_objtxt.
i_objtxt = ' '.
APPEND i_objtxt.
i_objtxt = ' '.
APPEND i_objtxt.
i_objtxt = ' '.
APPEND i_objtxt.
i_objtxt = ' '.
APPEND i_objtxt.
i_objtxt = ' '.
APPEND i_objtxt.
i_objtxt = ' '.
APPEND i_objtxt.
i_objtxt = ' '.
APPEND i_objtxt.
i_objtxt = ' '.
APPEND i_objtxt.
i_objtxt = ' '.
APPEND i_objtxt.
i_objtxt = ' '.
APPEND i_objtxt.
i_objtxt = ' '.
APPEND i_objtxt.
i_objtxt = ' '.
APPEND i_objtxt.
i_objtxt = 'Regards: '.
APPEND i_objtxt.
i_objtxt = 'Corporate HR '.
APPEND i_objtxt.
DESCRIBE TABLE i_objtxt LINES L_LINES.
READ TABLE i_objtxt INDEX L_LINES.
wa_doc_chng-doc_size = ( L_LINES - 1 ) * 255 + STRLEN( i_objtxt ).
*Creating the entry for the compressed document
CLEAR i_objpack-transf_bin.
i_objpack-head_start = 1.
i_objpack-head_num = 0.
i_objpack-body_start = 1.
i_objpack-body_num = L_LINES.
i_objpack-doc_type = 'RAW'.
APPEND i_objpack.
***CLEAR: i_objpack .
***i_objpack-transf_bin = ' '.
**i_objpack-head_start = 1.
**i_objpack-head_num = 0.
**i_objpack-body_start = 1.
**i_objpack-body_num = L_LINES.
**i_objpack-doc_type = 'TXT'.
**i_objpack-obj_descr = desc1 .
**APPEND i_objpack.
*CLEAR: i_objhead .
*i_objhead = DESC.
*APPEND i_objhead.
*break-point .
i_objpack-transf_bin = 'X'.
i_objpack-head_start = 1.
i_objpack-head_num = 1.
i_objpack-body_start = 1.
i_objpack-body_num = bin_filesize.
i_objpack-obj_name = 'Employee Payslip'.
i_objpack-obj_descr = 'Employee Payslip'.
i_objpack-doc_size = bin_filesize * 255 .
i_objpack-doc_type = 'PDF'.
APPEND i_objpack.
CONCATENATE 'Salary Slip of Month' p_month INTO desc SEPARATED BY ' ' .
*DESCRIBE TABLE i_objtxt LINES v_lines_txt.
*READ TABLE i_objtxt INDEX v_lines_txt.
****wa_doc_chng-doc_size = ( v_lines_txt - 1 ) * 375 + STRLEN( i_objtxt ).
wa_doc_chng-obj_name = 'Payslip'.
wa_doc_chng-expiry_dat = sy-datum + 10.
wa_doc_chng-obj_descr = desc.
wa_doc_chng-sensitivty = 'F'.
wa_doc_chng-doc_size = v_lines_txt * 255.
CLEAR i_objpack.
DATA: l_usrid_long TYPE pa0105-usrid_long.
DATA : emessage(70) TYPE c.
CLEAR : l_usrid_long.
SELECT SINGLE usrid_long
FROM pa0105
INTO l_usrid_long
WHERE pernr = git_pa0001-pernr
AND subty = '0010'.
*break-point.
IF sy-subrc EQ 0.
i_reclist-receiver = l_usrid_long.
i_reclist-rec_type = 'U'.
i_reclist-com_type = 'INT'.
APPEND i_reclist.
ELSE.
WRITE:/ 'No email id is maintained for this personnel number' , git_pa0001-pernr.
ENDIF.
IF NOT i_reclist[] IS INITIAL.
***************************************for senders id *************************************
CALL FUNCTION 'SO_DOCUMENT_SEND_API1'
EXPORTING
document_data = wa_doc_chng
put_in_outbox = 'X'
sender_address = 'xys'
sender_address_type = 'SMTP'
commit_work = 'X'
* IMPORTING
* SENT_TO_ALL =
* NEW_OBJECT_ID =
* SENDER_ID =
TABLES
packing_list = i_objpack
object_header = i_objhead
contents_bin = i_objbin
contents_txt = i_objtxt
receivers = i_reclist
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
OTHERS = 8. .
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF. -
IMAP option to not delete from server OR recommend alternate mail app?
Using POP in Windows computer and IMAP on iphone.
In the iphone, POP has the opton to "delete from server: never"
There seems no way to accomplish this in the stock mail app when using IMAP ?
Using POP on the iphone is not an option due to the longstanding issue of the Apple mail apps not sending a proper termination signal back. The mailbox remains locked until the server times it out for inactivity and cleans up the stale lock after 10 minutes. The result is "wrong password" on the computer if it then tries to retrieve during that period. It's a feature of POP by design to use a lock to prevent corruption caused by simultaneous access to the mailbox. BUT, BB,Android,Windows all handle this correctly so that their POP transaction (and the mailbox lock) only lasts seconds! Only ever see this persistent lock with Apple mail clients
The user likes to keep his phone inbox clean, he will delete messages as he deals with them as well as messages he is postponing to deal with on computer later.
Moving messages to a 'later' folder won't help, as that 'later' folder will not be available thru POP (for the computer)
They also don't want to use IMAP on the computer because they don't want their communications stored on the server any longer than necessary.
Can anyone recommend:
- Windows IMAP client which downloads all and keeps a local copy of inbox which does not synch with server inbox.
- Alternate mail app for iphone which allows "delete from device only // never delete from server "That's not how IMAP works. If you want to keep the inbox clean, but not delete the messages, create folders and move the messages into them for later review.
Maybe you are looking for
-
i can't activate my iPad and I'm sure i am using the correct apple id and password but when i press net it says it cannot be used to unlock this
-
How to disable external display (s-video adapter)
My problem is this: I have the new iMac in my office and I have my widescreen TV (CRT non-HDTV) on the other side of the wall in the living room. I recently purchased the Apple video adapter so I could run a s-video cable through the wall to my TV. I
-
How to I eliminate space in my start up file so I can increase more space to add onenote?
how to I eliminate space in my start up file so I can increase more space to add one-note?
-
Exporting photos from iPhoto to a hard drive or cd
Hi , when I export my photos to a hard drive formatted by mac, the sizes of the files sometime double. A 5 MB photo becomes 10 to 12 MB. My camera is not even capable of shooting so many megapixels resluting in this size. When I was using PC this nev
-
Error CNTR0019E when starting LiveCycleES cluster
when satrting the cluster it throws warnings from the first node and errors from the 2nd node. any ideas? first node contunuously shows: [10/14/09 18:38:05:733 EDT] 00000045 DSCJobStoreTX W org.quartz.impl.jdbcjobstore.JobStoreSupport findFailedInsta