Trouble of Wifi N/G mode in windows 7

Hi there,
i've got a little trouble about my wifi signal in win7 environment.
When i set my router to '802.11n and g mixed' or 'n only' mode, the transmit rate under win7 was only 1mbps to 22 mbps (the free distant between the router and my macbook pro 134 was 2m) and it is hard for me to open any web set.
After i switch the router to G only mode, however, the transmit rate could maintain 54 mbps.
It's only happen in windows OS.

which router?

Similar Messages

My Ipod touch Is stuck in restoe mode. I have reinstalled Itunes 10.4 .1 10. windows says drivers are not installed. I have followed all trouble shooting advice, fixes and updates for windows 7

I have reinstalled Itunes 10.4 .1 10. windows says drivers are not installed. I have followed all trouble shooting advice, fixes and updates for windows 7

I have reinstalled Itunes 10.4 .1 10. windows says drivers are not installed. I have followed all trouble shooting advice, fixes and updates for windows 7

I am having trouble installing Adobe Creative Cloud on my windows 7 laptop

I am having trouble installing Adobe Creative Cloud on my Windows 7 laptop; i keep getting an error message
this is what I get
-- Payload: Acrobat Professional 11.0.0.0 {23D3F585-AE29-4670-8E3E-64A0EFB29240} ----------- ERROR: Error 1316.A network error occurred while attempting to read from the file C:\Windows\Installer\AcroStan.msi ERROR: Install MSI payload failed with error: 1603 - Fatal error during installation. MSI Error message: Error 1316.A network error occurred while attempting to read from the file C:\Windows\Installer\AcroStan.msi ERROR: Third party payload installer AcroPro.msi failed with exit code: 1603

http://helpx.adobe.com/creative-suite/kb/error-1603-fatal-error-occurred-1.html
http://helpx.adobe.com/creative-suite/kb/errors-exit-code-6-exit.html
Mylenium

JInternalFrame Full Screen Exclusive mode lag Windows 7?

Hi everyone I'm not sure if i'm posting this question in the right category so feel free to move it. I recently have been playing around with full screen exclusive mode and JInternalFrames. Now what iv'e noticed is on every platform i've tried it works fine. When clicking and dragging the JInternalFrame to a new location it is quick and responsive. However when doing this same operation in Windows 7 the JInternalFrame lags significantly behind the mouse location as i'm dragging the internal frame. I haven't had a chance to test this on any other Windows platforms such as Vista or XP but I don't think it happens on those platforms, at least I don't remember this ever happening when I had Windows Vista and it doesn't occur in Mac OS 10.6.
The following are the circumstances i've found that produce this problem:
*1. The program is set to Full Screen Exclusive mode.*
*2. You are using Windows 7 (possibly other Windows platforms)*
*3. Click and drag a JInternalFrame to a new location.*
I've tried several things to see if it fixes the problem such as setting the look and feel to cross platform but nothing helps. In fact when the LAF is set to cross platform it is even worse.
Now i'm new to Full Screen Exclusive mode so i'm guessing (hoping) this is a problem caused by an error on my part. Here is the source code, i'd appreciate it if you give it a try. My question is how do I fix this lag so that the JInternalFrame is quick and responsive to the user dragging the window and i'm also wondering if this only happens on Windows 7 so if anyone could also tell me if they experience the problem I am describing and the OS you are using that would be great. Thank you guys :)
Also any input about wether i'm setting up full screen exclusive mode correctly would be much appreciated too.
package lag;
import java.awt.event.*;
import java.awt.*;
import javax.swing.*;
public class InternalFrameLag
 public static void main(String[] args) {
 SwingUtilities.invokeLater( new Runnable() {
 public void run() {
 new InternalFrameLag();
 GraphicsEnvironment env = GraphicsEnvironment.getLocalGraphicsEnvironment();
 GraphicsDevice[] devices = env.getScreenDevices();
 GraphicsDevice device;
 JFrame frame = new JFrame("Internal Frame Lag");
 JDesktopPane pane = new JDesktopPane();
 JInternalFrame internalFrame = new JInternalFrame("Internal Frame", true, true, true, true);
 JButton exit = new JButton("Exit");
 public InternalFrameLag() {
 frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
 frame.setUndecorated(true);
 exit.addActionListener(new ActionListener() {
 public void actionPerformed(ActionEvent e) {
 System.exit(0);
 exit.setPreferredSize(new Dimension(250,23));
 internalFrame.setLayout(new FlowLayout());
 internalFrame.setBounds(100,100,500,300);
 internalFrame.add(exit);
 pane.add(internalFrame);
 frame.add(pane);
 // get device that supports full screen
 for(int i = 0; i<devices.length; i++) {
 if(devices.isFullScreenSupported()) {
device = devices[i];
break;
if(device!=null) {
device.setFullScreenWindow(frame);
internalFrame.setVisible(true);
} else {
System.exit(0);
Edit: Decided to make the font size bigger. Eyestrain is killing me.

Darryl Burke wrote:
neptune692 wrote:

Edit: Decided to make the font size bigger. Eyestrain is killing me.Hopefully that will carry over to my response and I won't have to edit to add it ;)
I don't see the lag you describe. There's some flicker when moving the internal frame around rapidly (it looks as if the borders follow the content a split second later, but can't be caught in a screen capture) but that's no different when I show the internal frame in a normal (not full screen) window.
<tt>Microsoft Windows [Version 6.1.7600]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:\Users\Darryl>java -version
java version "1.6.0_17"
Java(TM) SE Runtime Environment (build 1.6.0_17-b04)
Java HotSpot(TM) Client VM (build 14.3-b01, mixed mode, sharing)</tt>
dbThanks for your reply and thanks for testing out my code. Could this lag be something wrong with my VM on Windows 7, cause the lag is extremely bad as in it takes a couple seconds for the internal frame to catch up with the mouse. I also just noticed that any other components in full screen exclusive mode on Windows 7 lag as well. Such as scrolling though a large amount of text, the scroll bar will lag far behind the mouse location and take a couple of seconds to catch up even when the mouse is moving fairly slow. I was hoping it was something in the code I was doing wrong but I guess not? Any suggestions on how I could fix this problem? It really makes my applications appear sluggish. For example when you click on a normal window such as in Windows Explorer and drag it to a new location the mouse stays in a fixed position on the window while you are dragging it. However with this lag the mouse appears to be "detatched" from the window and does not stay in the same location on the window while dragging. Does anyone else experience this or is this normal? I'm using Windows 7 64bit but I don't think that would make any difference. I'd also like to point out that I'm using Java 6 update 21 I don't know if that would make a difference opposed to update 17.
Thanks again.
Edited by: neptune692 on Oct 2, 2010 10:23 AM

My 6th generation nano isn't recognized by my computer. When I plug it in an error message pops up, which says "USB Device Not Recognized". Does anyone know how to start trouble shooting this. I updated both windows and iTunes.

My 6th generation nano isn't recognized by my computer. When I plug it in an error message pops up, which says "USB Device Not Recognized". Does anyone know how to start trouble shooting this? I updated both windows and iTunes.

Work through all the suggestions in this Apple support document first.
iPod: Does not appear in Windows or iTunes and Device Manager is empty
B-rock

Error - iTunes Library .iti file is locked on a disk or you do not have permission for this file. I can open itunes in the compatibility mode for Windows XP Service Pack 3 ???

In Windows 8 I received the error iTunes Library .iti file is locked on a disk or you do not have permission for this file. I can open itunes in the compatibility mode for Windows XP Service Pack 3.
I've tried changing permissions and sharing - nothing seems to work. mat be a Windows 8 issue???

You also need to make sure you have both read and write permission for the file, or for the whole iTunes folder for that matter. That's also done in Get Info for the file or folder concerned.
Read the part about changing permissions on the iTunes folder in: https://discussions.apple.com/message/11583914

In XP Mode on Windows 7, after installing application as like I would normally on an actual XP system, application will not start in windows XP mode itself.

Just did a clean install of windows 7. I then downloaded windows XP mode and Windows Virtual Mode. Everything ran flawlessly and everything is updated. I needed to Install a program called Dentrix 10.5 which can only be installed on Windows
XP for numerous reasons and one including it needing to use Microsoft .NET 1.0. I installed this program on Windows XP Mode as I would as if I were installing it with a computer with windows XP. The Install of the program went fine and completed.
Still being in Windows XP Mode I wanted to see how it would run. I hit Start Menu, All Programs, Startup Programs, and clicked on the Dentrix Application. Once I clicked it the time glass on the mouse was there for a few seconds and
then went away without the application starting up at all. One thing that I'm thinking is why after I clicked Start Menu, All programs, is why was Dentrix not in its own folder and instead in the Startup programs after All programs? Any Ideas how
to get the program to run? Like I said, I am trying to run the program in Windows XP Mode and not Windows 7 as I have found many Q's and A's on only how to do that. Also this is the second application which I downloaded and the first being Microsoft
Security Essentials so I know I don't have some virus from keeping from opening the Dentrix Application. Incase you are wondering the Microsoft Security Essentials opens and runs fine in Windows XP Mode. So Pretty Much My Main question is: Why
my application not starting up in Windows XP Mode? Any help is greatly appreciated!

Once I clicked it the time glass on the mouse was there for a few seconds and then went away without the application starting up at all.
A couple times a week I open Dentrix 11.0 in a virtual machine on Windows 7. I experience the same thing almost every time I open the VM. I must first get Windows to "reconnect" my network for me. Do this by opening Start | My Computer, and
double-click on the mapped network drive leading to the Dentrix data. After I can see the Dentrix data drive, Dentrix will be able to read it too and will open correctly.
In Dentrix, seeing nothing (or briefly seeing a hourglass and then seeing nothing) is a classic sign that either:
- The database files are marked as Read Only
- The program cannot access the data files (probably the folder it is pointed to does not contain any data).
- Or possibly the database path does not point to the right location where the data files are located
Open the folder where you installed the program files of Dentrix (probably c:\program files\dentrix\) and double-click to run EP.EXE. The database path will be revealed. You can "Browse" to the correct location, and "OK" through the dialog to
close them. Then try opening Dentrix again.
Should that not work, open Start | My Computer, and try to open the path (starting with the drive letter, then the folder structure you saw in EP.EXE).
By the way, if your path uses UNC (starting with two back-slashes and then the computer name of the server), you'll need to map a network drive and replace your path with a mapped drive path. (Map a drive in Start | My Computer | Tools | Map Network
Drive). Dentrix really doesn't like UNC paths.
Dentrix 10.5 can only be installed on Windows XP
Microsoft .NET 1.0
Just FYI, Microsoft .Net Framework 1.0 is required only for the "Time Clock" feature of Dentrix. Windows 7 already has .NET Framework features up to version 3.5 built in, and Time Clock (in my experience) works great under Windows 7 without installing
.NET 1.0.
Have you tried installing directly in Windows 7? I have a specific reason why I don't (I have a newer version of Dentrix installed on my Win 7 machine, and use the VM to go back to an older database occasionally - so I can't mix two different program versions
on the same machine). If you were to try installing this program under Windows 7 directly, Dentrix will launch the Microsoft .NET Framework install after the Dentrix install is completed. Just cancel out at that point (Windows will probably give you an "incompatibility"
error message anyway before allowing the install to go through) and I believe you can run it under Windows 7. That might eliminate the networking-through-the-VM issue. So, if you have no other reason not to install Dentrix on your Windows 7 machine directly,
I'd try it. You might be surprised and if it works, you'd save yourself some headache with connecting the to network through the virual machine.
Is why was Dentrix not in its own folder and instead in the Startup programs after All programs?
During the installation, on the Select Program Folder screen, you must have clicked the "Startup" option under Existing Folders. By default, "Dentrix" will be typed into the box at the top. If you simply clicked Next, it would have gone
to the correct location. The screen is a little confusing, because something in the list will be highlighted by default, but what is typed into the box at the top will actually be used.

Can one build a XP mode on Windows 8.1 ? (Software that will provide the same experiance?)

I Know XP mode is not supported under Windows 8. I was wondering if there was a way to manually build a XP mode install.
I want the same experiance as XP mode due to having hardware that only has 32bit support(driver) on Windows 8.1 x64.
I would like the shortcuts to the apps on the desktop and to be able to run them from the VM.
I have PLENTY of Windows XP pro licences that are not in use any more and I have the media. I would prefer not to install a whole VM package and have to run it in a VM as I want to use it on a 8.1 tablet I have.
With all the VM software packages out there for free, is there one that will provide what I am looking for ?
Me

Me,
The answer to your question is no, a Windows XP mode cannot be manually built for Windows 8.1.
Your options include Hyper-V as well as VirtualBox and VMWare player, which was already mentioned.
Even if there were a way to build a Windows XP mode within Windows 8.1, it wouldn’t be supported past April 8th, which is the end of support date for Windows XP.
This includes Windows XP mode in Windows 7.
The
Windows XP End of Support page also lists other issues that you would be facing, such as:
Security:
Without critical Windows XP security updates, your PC may become vulnerable to harmful viruses, spyware, and other malicious software which can steal or damage your business
data and information. Anti-virus software will also not be able to fully protect you once Windows XP itself is unsupported.
Compliance:
Businesses that are governed by regulatory obligations such as HIPAA may find that they are no longer able to satisfy compliance requirements. More information on HHS’s
view on the security requirements for information systems that contain electronic protected health information (e-PHI) can be found here (HHS HIPAA FAQ - Security
Rule).
Lack of Independent Software Vendor (ISV) Support:
Many software vendors will no longer support their products running on Windows XP as they are unable to receive Windows XP updates. For example, the new Office takes advantage
of the modern Windows and will not run on Windows XP.
Hardware Manufacturer support:
Most PC hardware manufacturers will stop supporting Windows XP on existing and new hardware. This will also mean that drivers required to run Windows XP on new hardware
may not be available.
Mike
Windows Outreach Team – IT Pro

"cannot complete windows setup" Windows xp mode on Windows 7 professional

I am currently having a problem loading windows xp mode on windows 7 professional on my new laptop
Laptop specs
LENOVO
Processor: AMD A6-5350M APU with Radeon(tm) HD Grapihcs 2.90 GHz
Installed memory (RAM): 4.00 GB (3.15 GB usable)
System type: 64-bit Operating System

experiencing the same issues you are describing on what appears to be the same model of computer. Can anyone provide additional information on applying the suggested hotfix?
@Rick Dee - After installing both XP mode and Virtual PC service pack on the computer XP mode appears in the list of Virtual Machines. After running through the initial set up of the VM (Windows XP Mode) listed in ~/<user>/virtual machines, the
setup of the VM fails with the error, "cannot complete windows setup".
I use a vhd that I deploy to all my client computers to run XP mode. I have deployed this vhd on at least 5 other laptops with the same specs from the same manufacturer. On this particular machine though, when I tried to deploy this vhd, the
vm just hangs. So I have been trying to install the distributed copy of Windows XP mode from Microsoft. When I do this, I get the error.

Will Let's Edit run on Windows XP mode in Windows 7?

I just purchsed an iMac and I want to load Windows 7 Professional onto it as well. We own the full version of Edius 5 but have not tried learning that program yet. I don't know if Edius 5 will run on Windows 7 but if I can still use Let's Edit I'll be in business for now. I read some information on running Windows XP mode on Windows 7 and I see that a special processer is needed in order to run this. Do you have any idea if my new iMac will support the Windows XP mode? Any help you can provide me will be extremely benefecial to me.
Also, where and how can i acquire the legacy OCHI firewire driver for my video card? As i mentioned, this will be on a new model iMac so will I still need this driver to be installed seperately? Why is it that the default driver installed by Windows 7 will not allow me to capture or output video?
What I am trying to ultimately avoid at this point is having to load an outdated Windows XP OS onto my brand new iMac that utilizes 64 bit hardware and software. I will greatly appreciate any further help you can provide me.
Thanks,
Nick

Some basics.
VMs are virtual machines. They run inside or under or side by side (same thing, just what people call it) and your Mac will run Windows and this application just peachy - perfect for anything except games.
Running Windows as Windows is also called running Windows natively (directly on the hardware, versus running in one of those VMs), is also called a dual boot: boot Mac OS -- or you boot Windows.
VMware Fusion: Install Windows via Boot CAmp (native, on its own hardware), but / and, you can also then use Fusion (which is a VM) inside Mac OS when you want; or, you can boot and run Windows natively.
XP Mode requires hardware virtualization to be enabled in the system board bios (that is EFI or actually UEFI, that Macs use). On a PC you have to enable it in BIOS as it is off by default usually.
It 'should' be enabled. Separate from 64-bit hardware. And separate from your UEFI firmware which is also 64-bit. But the Mac Pro found itself with VT-d off after an Apple Security Update. Go figure.
XP Mode is really just hardware VM. And using Sun (now Oracle) VirtualBox VM (free) is easy.
A VM just does not benefit from 64-bit, unless you need to allocate say 4-6GB RAM in your VM, and your app definitely does not.
Pro version is what MS sells or offers to education institutions.
Is needed for more backup options, XP Mode, dual processor (Mac Pro).
Download and play with VirtualBox and Windows 7 Pro 32-bit.
I have Pro and Ultimate on two systems.

Why does Digital Edition not work in desktop mode for WIndows 8?

I have installed the most recent version of JAVA and then downloaded and installed Digital Editions. I can open Digital Editions in desktop mode but when I select a book I cannot turn the page or move to a new page by any means. The only thing that seems to work is to select a new page and then toggle between full screen and partial.

I don't think ADE uses Java at all.
I run it in desktop mode in WIndows 8 and it reads books and turns pages fine: either using the left-right arrow keys,
or clicking on the forward/back buttons each side of the scrollbar at the bottom of the page.
There are lots of bugs in ADE2.0, and even though that isn't a bug for me it may be for you.
Try replacing ADE2.0 with the older but more reliable v1.7.2.
(You can have them both installed at once if you like.)
Version 1.7.2, it is a little difficult to find, available on Adobe site for Windows and for Mac.
http://helpx.adobe.com/digital-editions/kb/cant-install-digital-editions.html
The forum software is sometimes corrupting the link above. There shouldn't be a blank in 'editio ns.html'. The following redirects to the same page: http://tinyurl.com/diged172

Can't get Windows XP Mode in Windows 7 to fill 27" screen

I successfully installed Windows XP Mode on my Windows 7 OS running in Boot Camp and it works but the XP VM doesn't fill the 27" screen when I expand it to Full Screen. I get black bars on the left and right side of the XP OS, the top and bottom are filled. I checked the settings on the Display control panel in XP and there are no choices other than the default setting. Does anyone know what to change to make Virtual PC running XP in Windows 7 fill my 27" iMac screen? (That's a mouth full).
Instructions for installing Windows XP Mode in Windows 7 here:
http://discussions.apple.com/thread.jspa?threadID=2416285&stqc=true

Good evening -
Thanks for the response. I loaded drivers from CD. I want to keep the operating system on the 80 GIG ATA drive and use the SATA RAID for programs. The drives show up in the device manager and in the VIA RAID utility that came with the motherboard but I can't see or access them through My Computer. I have tried to set up the RAID through both the Windows software and through the Boot program, but no luck. When I tried to update the drivers from the floppy it said no newer drivers found. (I tried to update drivers through the Device manager.) Also when I deleted the raid and tried to set up the drives individually the same thing happened. Is it possible I don't have the BIOS set up correctly? I am at a loss.
Tony

XP Mode in Windows 7 Will Not Recognize my Vision:M 30gb

I am trying to attach a Creative Labs Zen Vision M: 30 GB MP3 player in my XP Mode on Windows 7 Professional. It shows in the drop-down under USB and I 'attach' it. However, for some reason, no program sees it and it's not showing in device manager or my computer.
At first, a balloon showed up that indicated MTP was found, but XPM never installed any drivers for it. There do not appear to be any stand alone drivers that I can install, so I tried to install Creative Media Source hoping that it would then see the device, but the player is still in limbo. Under the USB drop down, it seems to be 'attached' since it now shows 'release' as the option, but XP Mode can't find it. When I search for new hardware, nothing. Manually adding, nothing.
Any ideas/suggesions would be greatly appreciated.

Not sure that this helps, but The Zen Vision M relies on Windows Media Player 0 (Windows Media Player 0 was the player that came with Windows XP). If you are running Windows XP you need to roll back your Windows Media Player (which has probably been updated to ) back to 0. If however you are running Windows 7 there is a bigger problem in that you cannot (as far as I've been able to ascertain) roll back to Windows Media Player 0 because Windows 7 won't support it

What plug in do I need to open files in virtual pc xp mode on windows 7?

I am unable to open CS 2 In Design files in virtual pc xp
mode on windows 7 - even tho it says I should be able to.
It says under 'content manager' check for the right plug ins
or upgrade to the latest version of in design.
What plug in do I need?
Or should I send windows 7 professional with xp mode back??

More than likely these are CS3 or later files and the latest version you have installed is CS2. Without a newer icon handler from a more recent version, the CS2 icon will be displayed for anything newer than CS, and Windows itself has no clue that any version of ID other than the last one installed is associated with the file type.
As Jongware points out, this is the typical error for trying to open a newer version file.

How to run labview program in debugging mode in windows 95 version

Respected all,
I am facing probelm while running probe.vi.
I received this command "connection to acquisition board was not found" when i run labview program.
I am using labview 5.1, fieldpoint FP 1000, NI-DAQ 6.5, Field point explorer version 1.6, Measurement and Automation Explorer 1.0.1.
I would kindly request you please help me how to run my program probe.vi in debugging mode in windows 95 version, so that i can locate where error occurs.
Thanking You
Yours faithfully
M.Vijay

Respected Norbert,
Thank you very much to for your help.
Norbert : Possible reasons are e.g. wrong IDs for measurement devices. If the error is connect to the FieldPoint, it is possible that it isn't configured correctly.
I am using Field point explorer 1.6, The Field point instrument FP 1000 and RS-232 port is using. It is confirmed that the field point instrument is working properly by LED light indication test.
Norbert: It sound like you are using DAQ devices (like PCI MIO 6952E) in the application. Are you sure that you select the correct device ID for this?
I am asking you to know, If i using Labview and Fieldpoint instrument FP 1000 to monitor my parameter interms of All, Channel 0, Channel 1, Channel 2, Channel 3, Channel 4, Channel 5, Channel 6, Channel 7 for my measurement.
But now i need to solve the command connection to acquisition board was not found, The expert say this command is due to there was no AT-AO-10 Analog Output board was present in CPU.
I do not find AT-AO-10 Analog Output board in my CPU, Previously the instrument was worked perfectly by other person who assembled everthing to measure temperature.
The only aswer know send by previous person is if my task does not imply the use of a DAQ you probably have to locate where the DAQ driver is called and exclude it from the program. try to run the program in debugging mode so that you can locate where the error occurs.
I do not know how to proceed his instruction. So i would kindly request you to please help me to solve my probelm.
I also removed AT-AO-10 software from device manager >> Data Acquisition system >> AT-AO-10 just now.
I also find GPIB version 1.30, when i remove in add or remove program, it say that Error removing the GPIB.
I am eagerly waiting for your help.
Thanking You
Yours faithfully
M.vijay

Trouble of Wifi N/G mode in windows 7

Similar Messages

Maybe you are looking for